Jump to content
Forums in Read-Only Mode - Please use Reddit ×
  • 0

ERROR nvidia-legacy-drivers for my geforce gtx570


morphmex

Question

Hello everyone, sorry if you have difficulty understanding me but I don't speak English very well ....
 Several times I installed funtoo gnome correctly using nvidia-legacy drivers for my geforce gtx570 but
 after a while I use funtoo with all my multimedia software the graphics server suddenly doesn't start anymore. 
I need to know better where I find the configuration files for a possible restore. 
I hope I was clear. The next time I post a screenshot of the graphic server error. Hello
Link to comment
Share on other sites

9 answers to this question

Recommended Posts

  • 0
(--) Log file renamed from "/var/log/Xorg.pid-4378.log" to "/var/log/Xorg.0.log"

X.Org X Server 1.20.5
X Protocol Version 11, Revision 0
Build Operating System: Linux 4.19.67_p2-r1-debian-sources-lts x86_64 Gentoo
Current Operating System: Linux funtoo 4.19.67_p2-r1-debian-sources-lts #1 SMP Fri Sep 27 05:31:51 -00 2019 x86_64
Kernel command line: BOOT_IMAGE=/kernel-debian-sources-lts-x86_64-4.19.67_p2-r1 nomodeset real_root=/dev/sdb3 rootfstype=ext4 rand_id=GFT5VECI
Build Date: 02 October 2019  08:57:44PM
 
Current version of pixman: 0.34.0
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct  3 10:40:12 2019
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using config directory: "/etc/X11/xorg.conf.d"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Automatically adding GPU devices
(==) Max clients allowed: 256, resource mask: 0x1fffff
(**) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/,
	/usr/share/fonts/Type1/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/75dpi/,
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/,
	/usr/share/fonts/Type1/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/75dpi/
(**) ModulePath set to "/usr/lib64/xorg/modules"
(WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x5564e53cbc40
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 24.0
	X.Org XInput driver : 24.1
	X.Org Server Extension : 10.0
(II) xfree86: Adding drm device (/dev/dri/card0)
(**) OutputClass "nvidia" ModulePath extended to "/opt/nvidia/nvidia-drivers-390.129/lib64,/opt/nvidia/nvidia-drivers-390.129/lib64/xorg/modules,/opt/nvidia/nvidia-drivers-390.129/lib64/opengl/nvidia/extensions,/usr/lib64/xorg/modules"
(--) PCI:*(1@0:0:0) 10de:1086:1043:8387 rev 161, Mem @ 0xf6000000/16777216, 0xe8000000/134217728, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/131072
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "glx"
(II) Loading /opt/nvidia/nvidia-drivers-390.129/lib64/opengl/nvidia/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
	compiled for 4.0.2, module version = 1.0.0
	Module class: X.Org Server Extension
(II) NVIDIA GLX Module  390.129  Tue Jul 23 00:23:45 PDT 2019
(II) LoadModule: "nvidia"
(II) Loading /opt/nvidia/nvidia-drivers-390.129/lib64/xorg/modules/drivers/nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
	compiled for 4.0.2, module version = 1.0.0
	Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver  390.129  Mon Jul 22 23:59:27 PDT 2019
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(++) using VT number 7

(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib64/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.20.5, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib64/xorg/modules/libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
	compiled for 1.20.5, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Enabling 2D acceleration
(--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
(--) NVIDIA(0):     CRT-0
(--) NVIDIA(0):     CRT-1
(--) NVIDIA(0):     DFP-0 (boot)
(--) NVIDIA(0):     DFP-1
(--) NVIDIA(0):     DFP-2
(--) NVIDIA(0):     DFP-3
(--) NVIDIA(0):     DFP-4
(II) NVIDIA(0): NVIDIA GPU GeForce GTX 570 (GF110) at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 1310720 kBytes
(--) NVIDIA(0): VideoBIOS: 70.10.55.00.01
(II) NVIDIA(0): Detected PCI Express Link width: 16X
(--) NVIDIA(GPU-0): CRT-0: disconnected
(--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
(--) NVIDIA(GPU-0): 
(--) NVIDIA(GPU-0): CRT-1: disconnected
(--) NVIDIA(GPU-0): CRT-1: 400.0 MHz maximum pixel clock
(--) NVIDIA(GPU-0): 
(--) NVIDIA(GPU-0): Ancor Communications Inc VK246 (DFP-0): connected
(--) NVIDIA(GPU-0): Ancor Communications Inc VK246 (DFP-0): Internal TMDS
(--) NVIDIA(GPU-0): Ancor Communications Inc VK246 (DFP-0): 330.0 MHz maximum pixel clock
(--) NVIDIA(GPU-0): 
(--) NVIDIA(GPU-0): SHARP HDMI (DFP-1): connected
(--) NVIDIA(GPU-0): SHARP HDMI (DFP-1): Internal TMDS
(--) NVIDIA(GPU-0): SHARP HDMI (DFP-1): 225.0 MHz maximum pixel clock
(--) NVIDIA(GPU-0): 
(--) NVIDIA(GPU-0): DFP-2: disconnected
(--) NVIDIA(GPU-0): DFP-2: Internal TMDS
(--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
(--) NVIDIA(GPU-0): 
(--) NVIDIA(GPU-0): DFP-3: disconnected
(--) NVIDIA(GPU-0): DFP-3: Internal TMDS
(--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
(--) NVIDIA(GPU-0): 
(--) NVIDIA(GPU-0): DFP-4: disconnected
(--) NVIDIA(GPU-0): DFP-4: Internal DisplayPort
(--) NVIDIA(GPU-0): DFP-4: 480.0 MHz maximum pixel clock
(--) NVIDIA(GPU-0): 
(==) NVIDIA(0): 
(==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
(==) NVIDIA(0):     will be used as the requested mode.
(==) NVIDIA(0): 
(II) NVIDIA(0): Validated MetaModes:
(II) NVIDIA(0):     "DFP-0:nvidia-auto-select,DFP-1:nvidia-auto-select"
(II) NVIDIA(0): Virtual screen size determined to be 3840 x 1080
(--) NVIDIA(0): DPI set to (92, 91); computed from "UseEdidDpi" X config
(--) NVIDIA(0):     option
(II) NVIDIA: Using 6144.00 MB of virtual memory for indirect memory
(II) NVIDIA:     access.
(II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
(II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
(II) NVIDIA(0):     configuration option may not be set correctly.  When the
(II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
(II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
(II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
(II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
(II) NVIDIA(0):     Config Options in the README.
(II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select,DFP-1:nvidia-auto-select"
(==) NVIDIA(0): Disabling shared memory pixmaps
(==) NVIDIA(0): Backing store enabled
(==) NVIDIA(0): Silken mouse enabled
(==) NVIDIA(0): DPMS enabled
(II) Loading sub module "dri2"
(II) LoadModule: "dri2"
(II) Module "dri2" already built-in
(II) NVIDIA(0): [DRI2] Setup complete
(II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
(II) Initializing extension Generic Event Extension
(II) Initializing extension SHAPE
(II) Initializing extension MIT-SHM
(II) Initializing extension XInputExtension
(II) Initializing extension XTEST
(II) Initializing extension BIG-REQUESTS
(II) Initializing extension SYNC
(II) Initializing extension XKEYBOARD
(II) Initializing extension XC-MISC
(II) Initializing extension XFIXES
(II) Initializing extension RENDER
(II) Initializing extension RANDR
(II) Initializing extension COMPOSITE
(II) Initializing extension DAMAGE
(II) Initializing extension MIT-SCREEN-SAVER
(II) Initializing extension DOUBLE-BUFFER
(II) Initializing extension RECORD
(II) Initializing extension DPMS
(II) Initializing extension Present
(II) Initializing extension DRI3
(II) Initializing extension X-Resource
(II) Initializing extension XVideo
(II) Initializing extension XVideo-MotionCompensation
(II) Initializing extension XFree86-VidModeExtension
(II) Initializing extension XFree86-DGA
(II) Initializing extension XFree86-DRI
(II) Initializing extension DRI2
(II) Initializing extension GLX
(II) Initializing extension GLX
(II) Indirect GLX disabled.
(II) Initializing extension NV-GLX
(II) Initializing extension NV-CONTROL
(II) Initializing extension XINERAMA
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Unsupported high keycode 372 for name <I372> ignored
>                   X11 cannot support keycodes above 255.
>                   This warning only shows for the first high keycode.
Errors from xkbcomp are not fatal to the X server
(II) config/udev: Adding input device Power Button (/dev/input/event1)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
	compiled for 1.20.5, module version = 2.10.6
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 24.1
(II) Using input driver 'evdev' for 'Power Button'
(**) Power Button: always reports core events
(**) evdev: Power Button: Device: "/dev/input/event1"
(--) evdev: Power Button: Vendor 0 Product 0x1
(--) evdev: Power Button: Found keys
(II) evdev: Power Button: Configuring as keyboard
(**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event1"
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
(**) Option "xkb_rules" "evdev"
(II) config/udev: Adding input device Power Button (/dev/input/event0)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Power Button'
(**) Power Button: always reports core events
(**) evdev: Power Button: Device: "/dev/input/event0"
(--) evdev: Power Button: Vendor 0 Product 0x1
(--) evdev: Power Button: Found keys
(II) evdev: Power Button: Configuring as keyboard
(**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event0"
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
(**) Option "xkb_rules" "evdev"
(II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event10)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event7)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event8)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event9)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event15)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event16)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event17)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event18)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event19)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event20)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA Intel PCH Line Out Side (/dev/input/event21)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event22)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device ASUS USB2.0 Webcam: ASUS USB2.0 (/dev/input/event14)
(**) ASUS USB2.0 Webcam: ASUS USB2.0: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'ASUS USB2.0 Webcam: ASUS USB2.0'
(**) ASUS USB2.0 Webcam: ASUS USB2.0: always reports core events
(**) evdev: ASUS USB2.0 Webcam: ASUS USB2.0: Device: "/dev/input/event14"
(--) evdev: ASUS USB2.0 Webcam: ASUS USB2.0: Vendor 0xc45 Product 0x6300
(--) evdev: ASUS USB2.0 Webcam: ASUS USB2.0: Found keys
(II) evdev: ASUS USB2.0 Webcam: ASUS USB2.0: Configuring as keyboard
(**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input18/event14"
(II) XINPUT: Adding extended input device "ASUS USB2.0 Webcam: ASUS USB2.0" (type: KEYBOARD, id 8)
(**) Option "xkb_rules" "evdev"
(II) config/udev: Adding input device USB OPTICAL MOUSE  (/dev/input/event4)
(**) USB OPTICAL MOUSE : Applying InputClass "evdev pointer catchall"
(II) Using input driver 'evdev' for 'USB OPTICAL MOUSE '
(**) USB OPTICAL MOUSE : always reports core events
(**) evdev: USB OPTICAL MOUSE : Device: "/dev/input/event4"
(--) evdev: USB OPTICAL MOUSE : Vendor 0x18f8 Product 0xf97
(--) evdev: USB OPTICAL MOUSE : Found 9 mouse buttons
(--) evdev: USB OPTICAL MOUSE : Found scroll wheel(s)
(--) evdev: USB OPTICAL MOUSE : Found relative axes
(--) evdev: USB OPTICAL MOUSE : Found x and y relative axes
(II) evdev: USB OPTICAL MOUSE : Configuring as mouse
(II) evdev: USB OPTICAL MOUSE : Adding scrollwheel support
(**) evdev: USB OPTICAL MOUSE : YAxisMapping: buttons 4 and 5
(**) evdev: USB OPTICAL MOUSE : EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/0003:18F8:0F97.0002/input/input10/event4"
(II) XINPUT: Adding extended input device "USB OPTICAL MOUSE " (type: MOUSE, id 9)
(II) evdev: USB OPTICAL MOUSE : initialized for relative axes.
(**) USB OPTICAL MOUSE : (accel) keeping acceleration scheme 1
(**) USB OPTICAL MOUSE : (accel) acceleration profile 0
(**) USB OPTICAL MOUSE : (accel) acceleration factor: 2.000
(**) USB OPTICAL MOUSE : (accel) acceleration threshold: 4
(II) config/udev: Adding input device USB OPTICAL MOUSE  (/dev/input/mouse0)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device USB OPTICAL MOUSE  Keyboard (/dev/input/event5)
(**) USB OPTICAL MOUSE  Keyboard: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'USB OPTICAL MOUSE  Keyboard'
(**) USB OPTICAL MOUSE  Keyboard: always reports core events
(**) evdev: USB OPTICAL MOUSE  Keyboard: Device: "/dev/input/event5"
(--) evdev: USB OPTICAL MOUSE  Keyboard: Vendor 0x18f8 Product 0xf97
(--) evdev: USB OPTICAL MOUSE  Keyboard: Found keys
(II) evdev: USB OPTICAL MOUSE  Keyboard: Configuring as keyboard
(**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.1/0003:18F8:0F97.0003/input/input11/event5"
(II) XINPUT: Adding extended input device "USB OPTICAL MOUSE  Keyboard" (type: KEYBOARD, id 10)
(**) Option "xkb_rules" "evdev"
(II) config/udev: Adding input device USB OPTICAL MOUSE  Consumer Control (/dev/input/event6)
(**) USB OPTICAL MOUSE  Consumer Control: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'USB OPTICAL MOUSE  Consumer Control'
(**) USB OPTICAL MOUSE  Consumer Control: always reports core events
(**) evdev: USB OPTICAL MOUSE  Consumer Control: Device: "/dev/input/event6"
(--) evdev: USB OPTICAL MOUSE  Consumer Control: Vendor 0x18f8 Product 0xf97
(--) evdev: USB OPTICAL MOUSE  Consumer Control: Found 1 mouse buttons
(--) evdev: USB OPTICAL MOUSE  Consumer Control: Found scroll wheel(s)
(--) evdev: USB OPTICAL MOUSE  Consumer Control: Found relative axes
(II) evdev: USB OPTICAL MOUSE  Consumer Control: Forcing relative x/y axes to exist.
(--) evdev: USB OPTICAL MOUSE  Consumer Control: Found absolute axes
(II) evdev: USB OPTICAL MOUSE  Consumer Control: Forcing absolute x/y axes to exist.
(--) evdev: USB OPTICAL MOUSE  Consumer Control: Found keys
(II) evdev: USB OPTICAL MOUSE  Consumer Control: Configuring as mouse
(II) evdev: USB OPTICAL MOUSE  Consumer Control: Configuring as keyboard
(II) evdev: USB OPTICAL MOUSE  Consumer Control: Adding scrollwheel support
(**) evdev: USB OPTICAL MOUSE  Consumer Control: YAxisMapping: buttons 4 and 5
(**) evdev: USB OPTICAL MOUSE  Consumer Control: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.1/0003:18F8:0F97.0003/input/input12/event6"
(II) XINPUT: Adding extended input device "USB OPTICAL MOUSE  Consumer Control" (type: KEYBOARD, id 11)
(**) Option "xkb_rules" "evdev"
(II) evdev: USB OPTICAL MOUSE  Consumer Control: initialized for relative axes.
(WW) evdev: USB OPTICAL MOUSE  Consumer Control: ignoring absolute axes.
(**) USB OPTICAL MOUSE  Consumer Control: (accel) keeping acceleration scheme 1
(**) USB OPTICAL MOUSE  Consumer Control: (accel) acceleration profile 0
(**) USB OPTICAL MOUSE  Consumer Control: (accel) acceleration factor: 2.000
(**) USB OPTICAL MOUSE  Consumer Control: (accel) acceleration threshold: 4
(II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event11)
(**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Logitech USB Keyboard'
(**) Logitech USB Keyboard: always reports core events
(**) evdev: Logitech USB Keyboard: Device: "/dev/input/event11"
(--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc31c
(--) evdev: Logitech USB Keyboard: Found keys
(II) evdev: Logitech USB Keyboard: Configuring as keyboard
(**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/0003:046D:C31C.0004/input/input15/event11"
(II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 12)
(**) Option "xkb_rules" "evdev"
(II) config/udev: Adding input device Logitech USB Keyboard Consumer Control (/dev/input/event12)
(**) Logitech USB Keyboard Consumer Control: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Logitech USB Keyboard Consumer Control'
(**) Logitech USB Keyboard Consumer Control: always reports core events
(**) evdev: Logitech USB Keyboard Consumer Control: Device: "/dev/input/event12"
(--) evdev: Logitech USB Keyboard Consumer Control: Vendor 0x46d Product 0xc31c
(--) evdev: Logitech USB Keyboard Consumer Control: Found absolute axes
(II) evdev: Logitech USB Keyboard Consumer Control: Forcing absolute x/y axes to exist.
(--) evdev: Logitech USB Keyboard Consumer Control: Found keys
(II) evdev: Logitech USB Keyboard Consumer Control: Forcing relative x/y axes to exist.
(II) evdev: Logitech USB Keyboard Consumer Control: Configuring as mouse
(II) evdev: Logitech USB Keyboard Consumer Control: Configuring as keyboard
(**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/0003:046D:C31C.0005/input/input16/event12"
(II) XINPUT: Adding extended input device "Logitech USB Keyboard Consumer Control" (type: KEYBOARD, id 13)
(**) Option "xkb_rules" "evdev"
(II) evdev: Logitech USB Keyboard Consumer Control: initialized for relative axes.
(WW) evdev: Logitech USB Keyboard Consumer Control: ignoring absolute axes.
(**) Logitech USB Keyboard Consumer Control: (accel) keeping acceleration scheme 1
(**) Logitech USB Keyboard Consumer Control: (accel) acceleration profile 0
(**) Logitech USB Keyboard Consumer Control: (accel) acceleration factor: 2.000
(**) Logitech USB Keyboard Consumer Control: (accel) acceleration threshold: 4
(II) config/udev: Adding input device Logitech USB Keyboard System Control (/dev/input/event13)
(**) Logitech USB Keyboard System Control: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Logitech USB Keyboard System Control'
(**) Logitech USB Keyboard System Control: always reports core events
(**) evdev: Logitech USB Keyboard System Control: Device: "/dev/input/event13"
(--) evdev: Logitech USB Keyboard System Control: Vendor 0x46d Product 0xc31c
(--) evdev: Logitech USB Keyboard System Control: Found keys
(II) evdev: Logitech USB Keyboard System Control: Configuring as keyboard
(**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/0003:046D:C31C.0005/input/input17/event13"
(II) XINPUT: Adding extended input device "Logitech USB Keyboard System Control" (type: KEYBOARD, id 14)
(**) Option "xkb_rules" "evdev"
(II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event3)
(**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Eee PC WMI hotkeys'
(**) Eee PC WMI hotkeys: always reports core events
(**) evdev: Eee PC WMI hotkeys: Device: "/dev/input/event3"
(--) evdev: Eee PC WMI hotkeys: Vendor 0 Product 0
(--) evdev: Eee PC WMI hotkeys: Found keys
(II) evdev: Eee PC WMI hotkeys: Configuring as keyboard
(**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input6/event3"
(II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 15)
(**) Option "xkb_rules" "evdev"
(II) config/udev: Adding input device PC Speaker (/dev/input/event2)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
dbus-daemon[4384]: [session uid=108 pid=4384] Activating service name='org.a11y.Bus' requested by ':1.1' (uid=108 pid=4390 comm="/usr/libexec/gnome-session-check-accelerated ")
dbus-daemon[4384]: [session uid=108 pid=4384] Successfully activated service 'org.a11y.Bus'
dbus-daemon[4397]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=108 pid=4390 comm="/usr/libexec/gnome-session-check-accelerated ")
dbus-daemon[4397]: Successfully activated service 'org.a11y.atspi.Registry'
SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry
(--) NVIDIA(GPU-0): CRT-0: disconnected
(--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
(--) NVIDIA(GPU-0): 
(--) NVIDIA(GPU-0): CRT-1: disconnected
(--) NVIDIA(GPU-0): CRT-1: 400.0 MHz maximum pixel clock
(--) NVIDIA(GPU-0): 
(--) NVIDIA(GPU-0): Ancor Communications Inc VK246 (DFP-0): connected
(--) NVIDIA(GPU-0): Ancor Communications Inc VK246 (DFP-0): Internal TMDS
(--) NVIDIA(GPU-0): Ancor Communications Inc VK246 (DFP-0): 330.0 MHz maximum pixel clock
(--) NVIDIA(GPU-0): 
(--) NVIDIA(GPU-0): SHARP HDMI (DFP-1): connected
(--) NVIDIA(GPU-0): SHARP HDMI (DFP-1): Internal TMDS
(--) NVIDIA(GPU-0): SHARP HDMI (DFP-1): 225.0 MHz maximum pixel clock
(--) NVIDIA(GPU-0): 
(--) NVIDIA(GPU-0): DFP-2: disconnected
(--) NVIDIA(GPU-0): DFP-2: Internal TMDS
(--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
(--) NVIDIA(GPU-0): 
(--) NVIDIA(GPU-0): DFP-3: disconnected
(--) NVIDIA(GPU-0): DFP-3: Internal TMDS
(--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
(--) NVIDIA(GPU-0): 
(--) NVIDIA(GPU-0): DFP-4: disconnected
(--) NVIDIA(GPU-0): DFP-4: Internal DisplayPort
(--) NVIDIA(GPU-0): DFP-4: 480.0 MHz maximum pixel clock
(--) NVIDIA(GPU-0): 
dbus-daemon[4384]: [session uid=108 pid=4384] Activating service name='org.freedesktop.portal.IBus' requested by ':1.10' (uid=108 pid=4434 comm="ibus-daemon --xim --panel disable ")
dbus-daemon[4384]: [session uid=108 pid=4384] Successfully activated service 'org.freedesktop.portal.IBus'
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Unsupported high keycode 372 for name <I372> ignored
>                   X11 cannot support keycodes above 255.
>                   This warning only shows for the first high keycode.
Errors from xkbcomp are not fatal to the X server

(gnome-shell:4407): GLib-CRITICAL **: 10:40:20.912: g_dir_open_with_errno: assertion 'path != NULL' failed

(gnome-shell:4407): GLib-CRITICAL **: 10:40:20.912: g_filename_to_utf8: assertion 'opsysstring != NULL' failed
GNOME Shell-Message: 10:40:20.985: No permission to trigger offline updates: Polkit.Error: GDBus.Error:org.freedesktop.PolicyKit1.Error.Failed: Action org.freedesktop.packagekit.trigger-offline-update is not registered

(gsd-media-keys:4510): GLib-CRITICAL **: 10:40:21.247: g_variant_get_va: assertion 'value != NULL' failed

(gsd-media-keys:4510): GLib-CRITICAL **: 10:40:21.247: g_variant_unref: assertion 'value != NULL' failed

(gsd-xsettings:4497): xsettings-plugin-WARNING **: 10:40:21.308: Failed to get current display configuration state: GDBus.Error:org.freedesktop.DBus.Error.NameHasNoOwner: Name "org.gnome.Mutter.DisplayConfig" does not exist
openConnection: connect: File o directory non esistente
cannot connect to brltty at :0
(--) NVIDIA(GPU-0): CRT-0: disconnected
(--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
(--) NVIDIA(GPU-0): 
(--) NVIDIA(GPU-0): CRT-1: disconnected
(--) NVIDIA(GPU-0): CRT-1: 400.0 MHz maximum pixel clock
(--) NVIDIA(GPU-0): 
(--) NVIDIA(GPU-0): Ancor Communications Inc VK246 (DFP-0): connected
(--) NVIDIA(GPU-0): Ancor Communications Inc VK246 (DFP-0): Internal TMDS
(--) NVIDIA(GPU-0): Ancor Communications Inc VK246 (DFP-0): 330.0 MHz maximum pixel clock
(--) NVIDIA(GPU-0): 
(--) NVIDIA(GPU-0): SHARP HDMI (DFP-1): connected
(--) NVIDIA(GPU-0): SHARP HDMI (DFP-1): Internal TMDS
(--) NVIDIA(GPU-0): SHARP HDMI (DFP-1): 225.0 MHz maximum pixel clock
(--) NVIDIA(GPU-0): 
(--) NVIDIA(GPU-0): DFP-2: disconnected
(--) NVIDIA(GPU-0): DFP-2: Internal TMDS
(--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
(--) NVIDIA(GPU-0): 
(--) NVIDIA(GPU-0): DFP-3: disconnected
(--) NVIDIA(GPU-0): DFP-3: Internal TMDS
(--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
(--) NVIDIA(GPU-0): 
(--) NVIDIA(GPU-0): DFP-4: disconnected
(--) NVIDIA(GPU-0): DFP-4: Internal DisplayPort
(--) NVIDIA(GPU-0): DFP-4: 480.0 MHz maximum pixel clock
(--) NVIDIA(GPU-0): 
Gjs-Message: 10:40:22.608: JS WARNING: [resource:///org/gnome/shell/ui/layout.js 23]: reference to undefined property "MetaWindowX11"

(gsd-color:4503): color-plugin-WARNING **: 10:40:55.752: failed to set screen _ICC_PROFILE: Apertura del file «/home/messana/.local/share/icc/edid-bdd9a5a15d2312060cfa770e98f091b8.icc» non riuscita: Permesso negato

(gsd-color:4503): color-plugin-WARNING **: 10:40:56.440: failed to set screen _ICC_PROFILE: Apertura del file «/home/messana/.local/share/icc/edid-bdd9a5a15d2312060cfa770e98f091b8.icc» non riuscita: Permesso negato

(gnome-shell:4407): Gjs-WARNING **: 10:45:53.859: JS ERROR: Exception in callback for signal: shown: ReferenceError: Lang is not defined
_completeLockScreenShown@resource:///org/gnome/shell/ui/screenShield.js:1127:13
_lockScreenShown@resource:///org/gnome/shell/ui/screenShield.js:1117:13
_resetLockScreen@resource:///org/gnome/shell/ui/screenShield.js:1025:13
activate@resource:///org/gnome/shell/ui/screenShield.js:1291:9
_onLongLightboxShown@resource:///org/gnome/shell/ui/screenShield.js:893:9
_emit@resource:///org/gnome/gjs/modules/signals.js:142:27
onComplete@resource:///org/gnome/shell/ui/lightbox.js:178:36
_addHandler/params[name]@resource:///org/gnome/shell/ui/tweener.js:85:13
_callOnFunction@resource:///org/gnome/gjs/modules/tweener/tweener.js:208:13
_updateTweenByIndex@resource:///org/gnome/gjs/modules/tweener/tweener.js:342:9
_updateTweens@resource:///org/gnome/gjs/modules/tweener/tweener.js:355:18
_onEnterFrame@resource:///org/gnome/gjs/modules/tweener/tweener.js:370:10
_emit@resource:///org/gnome/gjs/modules/signals.js:142:27
_onNewFrame@resource:///org/gnome/shell/ui/tweener.js:201:9
ClutterFrameTicker</<@resource:///org/gnome/shell/ui/tweener.js:172:13

dbus-daemon[4384]: [session uid=108 pid=4384] Reloaded configuration
dbus-daemon[4384]: [session uid=108 pid=4384] Reloaded configuration
dbus-daemon[4384]: [session uid=108 pid=4384] Reloaded configuration
dbus-daemon[4384]: [session uid=108 pid=4384] Reloaded configuration
dbus-daemon[4384]: [session uid=108 pid=4384] Reloaded configuration
dbus-daemon[4384]: [session uid=108 pid=4384] Reloaded configuration

(gsd-color:4503): color-plugin-WARNING **: 12:06:26.563: failed to connect to device: Failed to connect to missing device /org/freedesktop/ColorManager/devices/xrandr_Ancor_Communications_Inc_VK246_BALMQS010867_messana_1000

(gsd-color:4503): color-plugin-WARNING **: 12:06:26.563: failed to connect to device: Failed to connect to missing device /org/freedesktop/ColorManager/devices/xrandr_Sharp_Corporation_SHARP_HDMI_messana_1000
Gdk-Message: 12:06:27.933: gnome-shell: Fatal IO error 11 (Risorsa temporaneamente non disponibile) on X server :0.

gnome-session-binary[4386]: WARNING: Lost name on bus: org.gnome.SessionManager

(gsd-housekeeping:4498): GLib-GIO-WARNING **: 12:06:27.938: Error releasing name org.gnome.SettingsDaemon.Housekeeping: La connessione è chiusa

(gsd-screensaver-proxy:4501): GLib-GIO-WARNING **: 12:06:27.938: Error releasing name org.freedesktop.ScreenSaver: La connessione è chiusa
Gdk-Message: 12:06:27.940: gsd-xsettings: Fatal IO error 11 (Risorsa temporaneamente non disponibile) on X server :0.

Gdk-Message: 12:06:27.941: gsd-power: Fatal IO error 11 (Risorsa temporaneamente non disponibile) on X server :0.

Gdk-Message: 12:06:27.941: gsd-wacom: Fatal IO error 11 (Risorsa temporaneamente non disponibile) on X server :0.

Gdk-Message: 12:06:27.941: gsd-media-keys: Fatal IO error 11 (Risorsa temporaneamente non disponibile) on X server :0.

Gdk-Message: 12:06:27.941: gsd-clipboard: Fatal IO error 11 (Risorsa temporaneamente non disponibile) on X server :0.

(II) evdev: Eee PC WMI hotkeys: Close
(II) UnloadModule: "evdev"
(II) evdev: Logitech USB Keyboard System Control: Close
(II) UnloadModule: "evdev"
(II) evdev: Logitech USB Keyboard Consumer Control: Close
(II) UnloadModule: "evdev"
(II) evdev: Logitech USB Keyboard: Close
(II) UnloadModule: "evdev"
(II) evdev: USB OPTICAL MOUSE  Consumer Control: Close
(II) UnloadModule: "evdev"
(II) evdev: USB OPTICAL MOUSE  Keyboard: Close
(II) UnloadModule: "evdev"
(II) evdev: USB OPTICAL MOUSE : Close
(II) UnloadModule: "evdev"
(II) evdev: ASUS USB2.0 Webcam: ASUS USB2.0: Close
(II) UnloadModule: "evdev"
(II) evdev: Power Button: Close
(II) UnloadModule: "evdev"
(II) evdev: Power Button: Close
(II) UnloadModule: "evdev"
(II) NVIDIA(GPU-0): Deleting GPU-0

** (gnome-session-failed:5908): WARNING **: 12:06:28.028: Cannot open display: 
(II) Server terminated successfully (0). Closing log file.

 

Thank you very much Daniel for answering me. You are unique. ;-)

Link to comment
Share on other sites

  • 0
(--) Log file renamed from "/var/log/Xorg.pid-4378.log" to "/var/log/Xorg.0.log"

X.Org X Server 1.20.5
X Protocol Version 11, Revision 0
Build Operating System: Linux 4.19.67_p2-r1-debian-sources-lts x86_64 Gentoo
Current Operating System: Linux funtoo 4.19.67_p2-r1-debian-sources-lts #1 SMP Fri Sep 27 05:31:51 -00 2019 x86_64
Kernel command line: BOOT_IMAGE=/kernel-debian-sources-lts-x86_64-4.19.67_p2-r1 nomodeset real_root=/dev/sdb3 rootfstype=ext4 rand_id=GFT5VECI
Build Date: 02 October 2019  08:57:44PM
 
Current version of pixman: 0.34.0
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct  3 10:40:12 2019
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using config directory: "/etc/X11/xorg.conf.d"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Automatically adding GPU devices
(==) Max clients allowed: 256, resource mask: 0x1fffff
(**) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/,
	/usr/share/fonts/Type1/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/75dpi/,
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/,
	/usr/share/fonts/Type1/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/75dpi/
(**) ModulePath set to "/usr/lib64/xorg/modules"
(WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x5564e53cbc40
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 24.0
	X.Org XInput driver : 24.1
	X.Org Server Extension : 10.0
(II) xfree86: Adding drm device (/dev/dri/card0)
(**) OutputClass "nvidia" ModulePath extended to "/opt/nvidia/nvidia-drivers-390.129/lib64,/opt/nvidia/nvidia-drivers-390.129/lib64/xorg/modules,/opt/nvidia/nvidia-drivers-390.129/lib64/opengl/nvidia/extensions,/usr/lib64/xorg/modules"
(--) PCI:*(1@0:0:0) 10de:1086:1043:8387 rev 161, Mem @ 0xf6000000/16777216, 0xe8000000/134217728, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/131072
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "glx"
(II) Loading /opt/nvidia/nvidia-drivers-390.129/lib64/opengl/nvidia/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
	compiled for 4.0.2, module version = 1.0.0
	Module class: X.Org Server Extension
(II) NVIDIA GLX Module  390.129  Tue Jul 23 00:23:45 PDT 2019
(II) LoadModule: "nvidia"
(II) Loading /opt/nvidia/nvidia-drivers-390.129/lib64/xorg/modules/drivers/nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
	compiled for 4.0.2, module version = 1.0.0
	Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver  390.129  Mon Jul 22 23:59:27 PDT 2019
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(++) using VT number 7

(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib64/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.20.5, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib64/xorg/modules/libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
	compiled for 1.20.5, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Enabling 2D acceleration
(--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
(--) NVIDIA(0):     CRT-0
(--) NVIDIA(0):     CRT-1
(--) NVIDIA(0):     DFP-0 (boot)
(--) NVIDIA(0):     DFP-1
(--) NVIDIA(0):     DFP-2
(--) NVIDIA(0):     DFP-3
(--) NVIDIA(0):     DFP-4
(II) NVIDIA(0): NVIDIA GPU GeForce GTX 570 (GF110) at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 1310720 kBytes
(--) NVIDIA(0): VideoBIOS: 70.10.55.00.01
(II) NVIDIA(0): Detected PCI Express Link width: 16X
(--) NVIDIA(GPU-0): CRT-0: disconnected
(--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
(--) NVIDIA(GPU-0): 
(--) NVIDIA(GPU-0): CRT-1: disconnected
(--) NVIDIA(GPU-0): CRT-1: 400.0 MHz maximum pixel clock
(--) NVIDIA(GPU-0): 
(--) NVIDIA(GPU-0): Ancor Communications Inc VK246 (DFP-0): connected
(--) NVIDIA(GPU-0): Ancor Communications Inc VK246 (DFP-0): Internal TMDS
(--) NVIDIA(GPU-0): Ancor Communications Inc VK246 (DFP-0): 330.0 MHz maximum pixel clock
(--) NVIDIA(GPU-0): 
(--) NVIDIA(GPU-0): SHARP HDMI (DFP-1): connected
(--) NVIDIA(GPU-0): SHARP HDMI (DFP-1): Internal TMDS
(--) NVIDIA(GPU-0): SHARP HDMI (DFP-1): 225.0 MHz maximum pixel clock
(--) NVIDIA(GPU-0): 
(--) NVIDIA(GPU-0): DFP-2: disconnected
(--) NVIDIA(GPU-0): DFP-2: Internal TMDS
(--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
(--) NVIDIA(GPU-0): 
(--) NVIDIA(GPU-0): DFP-3: disconnected
(--) NVIDIA(GPU-0): DFP-3: Internal TMDS
(--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
(--) NVIDIA(GPU-0): 
(--) NVIDIA(GPU-0): DFP-4: disconnected
(--) NVIDIA(GPU-0): DFP-4: Internal DisplayPort
(--) NVIDIA(GPU-0): DFP-4: 480.0 MHz maximum pixel clock
(--) NVIDIA(GPU-0): 
(==) NVIDIA(0): 
(==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
(==) NVIDIA(0):     will be used as the requested mode.
(==) NVIDIA(0): 
(II) NVIDIA(0): Validated MetaModes:
(II) NVIDIA(0):     "DFP-0:nvidia-auto-select,DFP-1:nvidia-auto-select"
(II) NVIDIA(0): Virtual screen size determined to be 3840 x 1080
(--) NVIDIA(0): DPI set to (92, 91); computed from "UseEdidDpi" X config
(--) NVIDIA(0):     option
(II) NVIDIA: Using 6144.00 MB of virtual memory for indirect memory
(II) NVIDIA:     access.
(II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
(II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
(II) NVIDIA(0):     configuration option may not be set correctly.  When the
(II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
(II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
(II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
(II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
(II) NVIDIA(0):     Config Options in the README.
(II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select,DFP-1:nvidia-auto-select"
(==) NVIDIA(0): Disabling shared memory pixmaps
(==) NVIDIA(0): Backing store enabled
(==) NVIDIA(0): Silken mouse enabled
(==) NVIDIA(0): DPMS enabled
(II) Loading sub module "dri2"
(II) LoadModule: "dri2"
(II) Module "dri2" already built-in
(II) NVIDIA(0): [DRI2] Setup complete
(II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
(II) Initializing extension Generic Event Extension
(II) Initializing extension SHAPE
(II) Initializing extension MIT-SHM
(II) Initializing extension XInputExtension
(II) Initializing extension XTEST
(II) Initializing extension BIG-REQUESTS
(II) Initializing extension SYNC
(II) Initializing extension XKEYBOARD
(II) Initializing extension XC-MISC
(II) Initializing extension XFIXES
(II) Initializing extension RENDER
(II) Initializing extension RANDR
(II) Initializing extension COMPOSITE
(II) Initializing extension DAMAGE
(II) Initializing extension MIT-SCREEN-SAVER
(II) Initializing extension DOUBLE-BUFFER
(II) Initializing extension RECORD
(II) Initializing extension DPMS
(II) Initializing extension Present
(II) Initializing extension DRI3
(II) Initializing extension X-Resource
(II) Initializing extension XVideo
(II) Initializing extension XVideo-MotionCompensation
(II) Initializing extension XFree86-VidModeExtension
(II) Initializing extension XFree86-DGA
(II) Initializing extension XFree86-DRI
(II) Initializing extension DRI2
(II) Initializing extension GLX
(II) Initializing extension GLX
(II) Indirect GLX disabled.
(II) Initializing extension NV-GLX
(II) Initializing extension NV-CONTROL
(II) Initializing extension XINERAMA
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Unsupported high keycode 372 for name <I372> ignored
>                   X11 cannot support keycodes above 255.
>                   This warning only shows for the first high keycode.
Errors from xkbcomp are not fatal to the X server
(II) config/udev: Adding input device Power Button (/dev/input/event1)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
	compiled for 1.20.5, module version = 2.10.6
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 24.1
(II) Using input driver 'evdev' for 'Power Button'
(**) Power Button: always reports core events
(**) evdev: Power Button: Device: "/dev/input/event1"
(--) evdev: Power Button: Vendor 0 Product 0x1
(--) evdev: Power Button: Found keys
(II) evdev: Power Button: Configuring as keyboard
(**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event1"
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
(**) Option "xkb_rules" "evdev"
(II) config/udev: Adding input device Power Button (/dev/input/event0)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Power Button'
(**) Power Button: always reports core events
(**) evdev: Power Button: Device: "/dev/input/event0"
(--) evdev: Power Button: Vendor 0 Product 0x1
(--) evdev: Power Button: Found keys
(II) evdev: Power Button: Configuring as keyboard
(**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event0"
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
(**) Option "xkb_rules" "evdev"
(II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event10)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event7)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event8)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event9)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event15)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event16)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event17)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event18)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event19)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event20)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA Intel PCH Line Out Side (/dev/input/event21)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event22)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device ASUS USB2.0 Webcam: ASUS USB2.0 (/dev/input/event14)
(**) ASUS USB2.0 Webcam: ASUS USB2.0: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'ASUS USB2.0 Webcam: ASUS USB2.0'
(**) ASUS USB2.0 Webcam: ASUS USB2.0: always reports core events
(**) evdev: ASUS USB2.0 Webcam: ASUS USB2.0: Device: "/dev/input/event14"
(--) evdev: ASUS USB2.0 Webcam: ASUS USB2.0: Vendor 0xc45 Product 0x6300
(--) evdev: ASUS USB2.0 Webcam: ASUS USB2.0: Found keys
(II) evdev: ASUS USB2.0 Webcam: ASUS USB2.0: Configuring as keyboard
(**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input18/event14"
(II) XINPUT: Adding extended input device "ASUS USB2.0 Webcam: ASUS USB2.0" (type: KEYBOARD, id 8)
(**) Option "xkb_rules" "evdev"
(II) config/udev: Adding input device USB OPTICAL MOUSE  (/dev/input/event4)
(**) USB OPTICAL MOUSE : Applying InputClass "evdev pointer catchall"
(II) Using input driver 'evdev' for 'USB OPTICAL MOUSE '
(**) USB OPTICAL MOUSE : always reports core events
(**) evdev: USB OPTICAL MOUSE : Device: "/dev/input/event4"
(--) evdev: USB OPTICAL MOUSE : Vendor 0x18f8 Product 0xf97
(--) evdev: USB OPTICAL MOUSE : Found 9 mouse buttons
(--) evdev: USB OPTICAL MOUSE : Found scroll wheel(s)
(--) evdev: USB OPTICAL MOUSE : Found relative axes
(--) evdev: USB OPTICAL MOUSE : Found x and y relative axes
(II) evdev: USB OPTICAL MOUSE : Configuring as mouse
(II) evdev: USB OPTICAL MOUSE : Adding scrollwheel support
(**) evdev: USB OPTICAL MOUSE : YAxisMapping: buttons 4 and 5
(**) evdev: USB OPTICAL MOUSE : EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/0003:18F8:0F97.0002/input/input10/event4"
(II) XINPUT: Adding extended input device "USB OPTICAL MOUSE " (type: MOUSE, id 9)
(II) evdev: USB OPTICAL MOUSE : initialized for relative axes.
(**) USB OPTICAL MOUSE : (accel) keeping acceleration scheme 1
(**) USB OPTICAL MOUSE : (accel) acceleration profile 0
(**) USB OPTICAL MOUSE : (accel) acceleration factor: 2.000
(**) USB OPTICAL MOUSE : (accel) acceleration threshold: 4
(II) config/udev: Adding input device USB OPTICAL MOUSE  (/dev/input/mouse0)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device USB OPTICAL MOUSE  Keyboard (/dev/input/event5)
(**) USB OPTICAL MOUSE  Keyboard: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'USB OPTICAL MOUSE  Keyboard'
(**) USB OPTICAL MOUSE  Keyboard: always reports core events
(**) evdev: USB OPTICAL MOUSE  Keyboard: Device: "/dev/input/event5"
(--) evdev: USB OPTICAL MOUSE  Keyboard: Vendor 0x18f8 Product 0xf97
(--) evdev: USB OPTICAL MOUSE  Keyboard: Found keys
(II) evdev: USB OPTICAL MOUSE  Keyboard: Configuring as keyboard
(**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.1/0003:18F8:0F97.0003/input/input11/event5"
(II) XINPUT: Adding extended input device "USB OPTICAL MOUSE  Keyboard" (type: KEYBOARD, id 10)
(**) Option "xkb_rules" "evdev"
(II) config/udev: Adding input device USB OPTICAL MOUSE  Consumer Control (/dev/input/event6)
(**) USB OPTICAL MOUSE  Consumer Control: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'USB OPTICAL MOUSE  Consumer Control'
(**) USB OPTICAL MOUSE  Consumer Control: always reports core events
(**) evdev: USB OPTICAL MOUSE  Consumer Control: Device: "/dev/input/event6"
(--) evdev: USB OPTICAL MOUSE  Consumer Control: Vendor 0x18f8 Product 0xf97
(--) evdev: USB OPTICAL MOUSE  Consumer Control: Found 1 mouse buttons
(--) evdev: USB OPTICAL MOUSE  Consumer Control: Found scroll wheel(s)
(--) evdev: USB OPTICAL MOUSE  Consumer Control: Found relative axes
(II) evdev: USB OPTICAL MOUSE  Consumer Control: Forcing relative x/y axes to exist.
(--) evdev: USB OPTICAL MOUSE  Consumer Control: Found absolute axes
(II) evdev: USB OPTICAL MOUSE  Consumer Control: Forcing absolute x/y axes to exist.
(--) evdev: USB OPTICAL MOUSE  Consumer Control: Found keys
(II) evdev: USB OPTICAL MOUSE  Consumer Control: Configuring as mouse
(II) evdev: USB OPTICAL MOUSE  Consumer Control: Configuring as keyboard
(II) evdev: USB OPTICAL MOUSE  Consumer Control: Adding scrollwheel support
(**) evdev: USB OPTICAL MOUSE  Consumer Control: YAxisMapping: buttons 4 and 5
(**) evdev: USB OPTICAL MOUSE  Consumer Control: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.1/0003:18F8:0F97.0003/input/input12/event6"
(II) XINPUT: Adding extended input device "USB OPTICAL MOUSE  Consumer Control" (type: KEYBOARD, id 11)
(**) Option "xkb_rules" "evdev"
(II) evdev: USB OPTICAL MOUSE  Consumer Control: initialized for relative axes.
(WW) evdev: USB OPTICAL MOUSE  Consumer Control: ignoring absolute axes.
(**) USB OPTICAL MOUSE  Consumer Control: (accel) keeping acceleration scheme 1
(**) USB OPTICAL MOUSE  Consumer Control: (accel) acceleration profile 0
(**) USB OPTICAL MOUSE  Consumer Control: (accel) acceleration factor: 2.000
(**) USB OPTICAL MOUSE  Consumer Control: (accel) acceleration threshold: 4
(II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event11)
(**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Logitech USB Keyboard'
(**) Logitech USB Keyboard: always reports core events
(**) evdev: Logitech USB Keyboard: Device: "/dev/input/event11"
(--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc31c
(--) evdev: Logitech USB Keyboard: Found keys
(II) evdev: Logitech USB Keyboard: Configuring as keyboard
(**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/0003:046D:C31C.0004/input/input15/event11"
(II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 12)
(**) Option "xkb_rules" "evdev"
(II) config/udev: Adding input device Logitech USB Keyboard Consumer Control (/dev/input/event12)
(**) Logitech USB Keyboard Consumer Control: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Logitech USB Keyboard Consumer Control'
(**) Logitech USB Keyboard Consumer Control: always reports core events
(**) evdev: Logitech USB Keyboard Consumer Control: Device: "/dev/input/event12"
(--) evdev: Logitech USB Keyboard Consumer Control: Vendor 0x46d Product 0xc31c
(--) evdev: Logitech USB Keyboard Consumer Control: Found absolute axes
(II) evdev: Logitech USB Keyboard Consumer Control: Forcing absolute x/y axes to exist.
(--) evdev: Logitech USB Keyboard Consumer Control: Found keys
(II) evdev: Logitech USB Keyboard Consumer Control: Forcing relative x/y axes to exist.
(II) evdev: Logitech USB Keyboard Consumer Control: Configuring as mouse
(II) evdev: Logitech USB Keyboard Consumer Control: Configuring as keyboard
(**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/0003:046D:C31C.0005/input/input16/event12"
(II) XINPUT: Adding extended input device "Logitech USB Keyboard Consumer Control" (type: KEYBOARD, id 13)
(**) Option "xkb_rules" "evdev"
(II) evdev: Logitech USB Keyboard Consumer Control: initialized for relative axes.
(WW) evdev: Logitech USB Keyboard Consumer Control: ignoring absolute axes.
(**) Logitech USB Keyboard Consumer Control: (accel) keeping acceleration scheme 1
(**) Logitech USB Keyboard Consumer Control: (accel) acceleration profile 0
(**) Logitech USB Keyboard Consumer Control: (accel) acceleration factor: 2.000
(**) Logitech USB Keyboard Consumer Control: (accel) acceleration threshold: 4
(II) config/udev: Adding input device Logitech USB Keyboard System Control (/dev/input/event13)
(**) Logitech USB Keyboard System Control: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Logitech USB Keyboard System Control'
(**) Logitech USB Keyboard System Control: always reports core events
(**) evdev: Logitech USB Keyboard System Control: Device: "/dev/input/event13"
(--) evdev: Logitech USB Keyboard System Control: Vendor 0x46d Product 0xc31c
(--) evdev: Logitech USB Keyboard System Control: Found keys
(II) evdev: Logitech USB Keyboard System Control: Configuring as keyboard
(**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/0003:046D:C31C.0005/input/input17/event13"
(II) XINPUT: Adding extended input device "Logitech USB Keyboard System Control" (type: KEYBOARD, id 14)
(**) Option "xkb_rules" "evdev"
(II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event3)
(**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Eee PC WMI hotkeys'
(**) Eee PC WMI hotkeys: always reports core events
(**) evdev: Eee PC WMI hotkeys: Device: "/dev/input/event3"
(--) evdev: Eee PC WMI hotkeys: Vendor 0 Product 0
(--) evdev: Eee PC WMI hotkeys: Found keys
(II) evdev: Eee PC WMI hotkeys: Configuring as keyboard
(**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input6/event3"
(II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 15)
(**) Option "xkb_rules" "evdev"
(II) config/udev: Adding input device PC Speaker (/dev/input/event2)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
dbus-daemon[4384]: [session uid=108 pid=4384] Activating service name='org.a11y.Bus' requested by ':1.1' (uid=108 pid=4390 comm="/usr/libexec/gnome-session-check-accelerated ")
dbus-daemon[4384]: [session uid=108 pid=4384] Successfully activated service 'org.a11y.Bus'
dbus-daemon[4397]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=108 pid=4390 comm="/usr/libexec/gnome-session-check-accelerated ")
dbus-daemon[4397]: Successfully activated service 'org.a11y.atspi.Registry'
SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry
(--) NVIDIA(GPU-0): CRT-0: disconnected
(--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
(--) NVIDIA(GPU-0): 
(--) NVIDIA(GPU-0): CRT-1: disconnected
(--) NVIDIA(GPU-0): CRT-1: 400.0 MHz maximum pixel clock
(--) NVIDIA(GPU-0): 
(--) NVIDIA(GPU-0): Ancor Communications Inc VK246 (DFP-0): connected
(--) NVIDIA(GPU-0): Ancor Communications Inc VK246 (DFP-0): Internal TMDS
(--) NVIDIA(GPU-0): Ancor Communications Inc VK246 (DFP-0): 330.0 MHz maximum pixel clock
(--) NVIDIA(GPU-0): 
(--) NVIDIA(GPU-0): SHARP HDMI (DFP-1): connected
(--) NVIDIA(GPU-0): SHARP HDMI (DFP-1): Internal TMDS
(--) NVIDIA(GPU-0): SHARP HDMI (DFP-1): 225.0 MHz maximum pixel clock
(--) NVIDIA(GPU-0): 
(--) NVIDIA(GPU-0): DFP-2: disconnected
(--) NVIDIA(GPU-0): DFP-2: Internal TMDS
(--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
(--) NVIDIA(GPU-0): 
(--) NVIDIA(GPU-0): DFP-3: disconnected
(--) NVIDIA(GPU-0): DFP-3: Internal TMDS
(--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
(--) NVIDIA(GPU-0): 
(--) NVIDIA(GPU-0): DFP-4: disconnected
(--) NVIDIA(GPU-0): DFP-4: Internal DisplayPort
(--) NVIDIA(GPU-0): DFP-4: 480.0 MHz maximum pixel clock
(--) NVIDIA(GPU-0): 
dbus-daemon[4384]: [session uid=108 pid=4384] Activating service name='org.freedesktop.portal.IBus' requested by ':1.10' (uid=108 pid=4434 comm="ibus-daemon --xim --panel disable ")
dbus-daemon[4384]: [session uid=108 pid=4384] Successfully activated service 'org.freedesktop.portal.IBus'
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Unsupported high keycode 372 for name <I372> ignored
>                   X11 cannot support keycodes above 255.
>                   This warning only shows for the first high keycode.
Errors from xkbcomp are not fatal to the X server

(gnome-shell:4407): GLib-CRITICAL **: 10:40:20.912: g_dir_open_with_errno: assertion 'path != NULL' failed

(gnome-shell:4407): GLib-CRITICAL **: 10:40:20.912: g_filename_to_utf8: assertion 'opsysstring != NULL' failed
GNOME Shell-Message: 10:40:20.985: No permission to trigger offline updates: Polkit.Error: GDBus.Error:org.freedesktop.PolicyKit1.Error.Failed: Action org.freedesktop.packagekit.trigger-offline-update is not registered

(gsd-media-keys:4510): GLib-CRITICAL **: 10:40:21.247: g_variant_get_va: assertion 'value != NULL' failed

(gsd-media-keys:4510): GLib-CRITICAL **: 10:40:21.247: g_variant_unref: assertion 'value != NULL' failed

(gsd-xsettings:4497): xsettings-plugin-WARNING **: 10:40:21.308: Failed to get current display configuration state: GDBus.Error:org.freedesktop.DBus.Error.NameHasNoOwner: Name "org.gnome.Mutter.DisplayConfig" does not exist
openConnection: connect: File o directory non esistente
cannot connect to brltty at :0
(--) NVIDIA(GPU-0): CRT-0: disconnected
(--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
(--) NVIDIA(GPU-0): 
(--) NVIDIA(GPU-0): CRT-1: disconnected
(--) NVIDIA(GPU-0): CRT-1: 400.0 MHz maximum pixel clock
(--) NVIDIA(GPU-0): 
(--) NVIDIA(GPU-0): Ancor Communications Inc VK246 (DFP-0): connected
(--) NVIDIA(GPU-0): Ancor Communications Inc VK246 (DFP-0): Internal TMDS
(--) NVIDIA(GPU-0): Ancor Communications Inc VK246 (DFP-0): 330.0 MHz maximum pixel clock
(--) NVIDIA(GPU-0): 
(--) NVIDIA(GPU-0): SHARP HDMI (DFP-1): connected
(--) NVIDIA(GPU-0): SHARP HDMI (DFP-1): Internal TMDS
(--) NVIDIA(GPU-0): SHARP HDMI (DFP-1): 225.0 MHz maximum pixel clock
(--) NVIDIA(GPU-0): 
(--) NVIDIA(GPU-0): DFP-2: disconnected
(--) NVIDIA(GPU-0): DFP-2: Internal TMDS
(--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
(--) NVIDIA(GPU-0): 
(--) NVIDIA(GPU-0): DFP-3: disconnected
(--) NVIDIA(GPU-0): DFP-3: Internal TMDS
(--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
(--) NVIDIA(GPU-0): 
(--) NVIDIA(GPU-0): DFP-4: disconnected
(--) NVIDIA(GPU-0): DFP-4: Internal DisplayPort
(--) NVIDIA(GPU-0): DFP-4: 480.0 MHz maximum pixel clock
(--) NVIDIA(GPU-0): 
Gjs-Message: 10:40:22.608: JS WARNING: [resource:///org/gnome/shell/ui/layout.js 23]: reference to undefined property "MetaWindowX11"

(gsd-color:4503): color-plugin-WARNING **: 10:40:55.752: failed to set screen _ICC_PROFILE: Apertura del file «/home/messana/.local/share/icc/edid-bdd9a5a15d2312060cfa770e98f091b8.icc» non riuscita: Permesso negato

(gsd-color:4503): color-plugin-WARNING **: 10:40:56.440: failed to set screen _ICC_PROFILE: Apertura del file «/home/messana/.local/share/icc/edid-bdd9a5a15d2312060cfa770e98f091b8.icc» non riuscita: Permesso negato

(gnome-shell:4407): Gjs-WARNING **: 10:45:53.859: JS ERROR: Exception in callback for signal: shown: ReferenceError: Lang is not defined
_completeLockScreenShown@resource:///org/gnome/shell/ui/screenShield.js:1127:13
_lockScreenShown@resource:///org/gnome/shell/ui/screenShield.js:1117:13
_resetLockScreen@resource:///org/gnome/shell/ui/screenShield.js:1025:13
activate@resource:///org/gnome/shell/ui/screenShield.js:1291:9
_onLongLightboxShown@resource:///org/gnome/shell/ui/screenShield.js:893:9
_emit@resource:///org/gnome/gjs/modules/signals.js:142:27
onComplete@resource:///org/gnome/shell/ui/lightbox.js:178:36
_addHandler/params[name]@resource:///org/gnome/shell/ui/tweener.js:85:13
_callOnFunction@resource:///org/gnome/gjs/modules/tweener/tweener.js:208:13
_updateTweenByIndex@resource:///org/gnome/gjs/modules/tweener/tweener.js:342:9
_updateTweens@resource:///org/gnome/gjs/modules/tweener/tweener.js:355:18
_onEnterFrame@resource:///org/gnome/gjs/modules/tweener/tweener.js:370:10
_emit@resource:///org/gnome/gjs/modules/signals.js:142:27
_onNewFrame@resource:///org/gnome/shell/ui/tweener.js:201:9
ClutterFrameTicker</<@resource:///org/gnome/shell/ui/tweener.js:172:13

dbus-daemon[4384]: [session uid=108 pid=4384] Reloaded configuration
dbus-daemon[4384]: [session uid=108 pid=4384] Reloaded configuration
dbus-daemon[4384]: [session uid=108 pid=4384] Reloaded configuration
dbus-daemon[4384]: [session uid=108 pid=4384] Reloaded configuration
dbus-daemon[4384]: [session uid=108 pid=4384] Reloaded configuration
dbus-daemon[4384]: [session uid=108 pid=4384] Reloaded configuration

(gsd-color:4503): color-plugin-WARNING **: 12:06:26.563: failed to connect to device: Failed to connect to missing device /org/freedesktop/ColorManager/devices/xrandr_Ancor_Communications_Inc_VK246_BALMQS010867_messana_1000

(gsd-color:4503): color-plugin-WARNING **: 12:06:26.563: failed to connect to device: Failed to connect to missing device /org/freedesktop/ColorManager/devices/xrandr_Sharp_Corporation_SHARP_HDMI_messana_1000
Gdk-Message: 12:06:27.933: gnome-shell: Fatal IO error 11 (Risorsa temporaneamente non disponibile) on X server :0.

gnome-session-binary[4386]: WARNING: Lost name on bus: org.gnome.SessionManager

(gsd-housekeeping:4498): GLib-GIO-WARNING **: 12:06:27.938: Error releasing name org.gnome.SettingsDaemon.Housekeeping: La connessione è chiusa

(gsd-screensaver-proxy:4501): GLib-GIO-WARNING **: 12:06:27.938: Error releasing name org.freedesktop.ScreenSaver: La connessione è chiusa
Gdk-Message: 12:06:27.940: gsd-xsettings: Fatal IO error 11 (Risorsa temporaneamente non disponibile) on X server :0.

Gdk-Message: 12:06:27.941: gsd-power: Fatal IO error 11 (Risorsa temporaneamente non disponibile) on X server :0.

Gdk-Message: 12:06:27.941: gsd-wacom: Fatal IO error 11 (Risorsa temporaneamente non disponibile) on X server :0.

Gdk-Message: 12:06:27.941: gsd-media-keys: Fatal IO error 11 (Risorsa temporaneamente non disponibile) on X server :0.

Gdk-Message: 12:06:27.941: gsd-clipboard: Fatal IO error 11 (Risorsa temporaneamente non disponibile) on X server :0.

(II) evdev: Eee PC WMI hotkeys: Close
(II) UnloadModule: "evdev"
(II) evdev: Logitech USB Keyboard System Control: Close
(II) UnloadModule: "evdev"
(II) evdev: Logitech USB Keyboard Consumer Control: Close
(II) UnloadModule: "evdev"
(II) evdev: Logitech USB Keyboard: Close
(II) UnloadModule: "evdev"
(II) evdev: USB OPTICAL MOUSE  Consumer Control: Close
(II) UnloadModule: "evdev"
(II) evdev: USB OPTICAL MOUSE  Keyboard: Close
(II) UnloadModule: "evdev"
(II) evdev: USB OPTICAL MOUSE : Close
(II) UnloadModule: "evdev"
(II) evdev: ASUS USB2.0 Webcam: ASUS USB2.0: Close
(II) UnloadModule: "evdev"
(II) evdev: Power Button: Close
(II) UnloadModule: "evdev"
(II) evdev: Power Button: Close
(II) UnloadModule: "evdev"
(II) NVIDIA(GPU-0): Deleting GPU-0

** (gnome-session-failed:5908): WARNING **: 12:06:28.028: Cannot open display: 
(II) Server terminated successfully (0). Closing log file.

 

Link to comment
Share on other sites

  • 0

@morphmex

Test boot your system with nomodeset removed from the kernel command line:

When grub2 boot menu appears hit e on keyboard to edit.

Remove nomodeset from kernel command line

Hit F10 key to boot.

If this solves the problem make it default by following directions here:

 https://www.funtoo.org/Install/Bootloader

boot.conf Configuration

 

Link to comment
Share on other sites

  • 0
  On 10/3/2019 at 8:38 AM, morphmex said:

I rebooted and I have this error

https://ibb.co/wSHwBbp

Expand  

From the error: install twm and xterm

emerge -av twm xterm

 

  On 10/4/2019 at 7:09 PM, morphmex said:

 

 
Using revdep-rebuild repeatedly I get this message. I can't get the consistent system.

https://ibb.co/wgJFsRQ

Expand  

instead of revdep-rebuild use: emerge -av @preserved-rebuild

and after a kernel update: emerge -av @module-rebuild

Link to comment
Share on other sites

×
×
  • Create New...