fanfoue Posted April 22, 2016 Report Share Posted April 22, 2016 Hello all, I'm new to funtoo (and gentoo), I installed my system one month ago. I'm getting trouble with a world update : dhcpcd build fails to find a "queue.h" include. By the way, my network card is statically configured, I would like to unmerge dhcpcd. But it's not in the world file and I could manage to mask it... Thanks for the help ! # emerge --sync >>> Syncing repository 'gentoo' into '/usr/portage'... /usr/bin/git pull Already up-to-date. === Sync completed for gentoo q: Updating ebuild cache in /usr/portage ... q: Finished 39891 entries in 0.330852 seconds >>> Syncing repository 'funtoo-overlay' into '/var/portage/funtoo-overlay'... /usr/bin/git pull Already up-to-date. === Sync completed for funtoo-overlay q: Updating ebuild cache in /var/portage/funtoo-overlay ... q: Finished 327 entries in 0.003057 seconds # emerge -a --keep-going --update --newuse --deep --with-bdeps=y world These are the packages that would be merged, in order: Calculating dependencies... done! [ebuild N ] net-misc/dhcpcd-6.10.2 USE="embedded ipv6 udev" Would you like to merge these packages? [Yes/No] >>> Verifying ebuild manifests >>> Emerging (1 of 1) net-misc/dhcpcd-6.10.2::gentoo * dhcpcd-6.10.2.tar.xz SHA256 SHA512 WHIRLPOOL size ;-) ... [ ok ] >>> Unpacking source... >>> Unpacking dhcpcd-6.10.2.tar.xz to /var/tmp/portage/net-misc/dhcpcd-6.10.2/work >>> Source unpacked in /var/tmp/portage/net-misc/dhcpcd-6.10.2/work >>> Preparing source in /var/tmp/portage/net-misc/dhcpcd-6.10.2/work/dhcpcd-6.10.2 ... >>> Source prepared. >>> Configuring source in /var/tmp/portage/net-misc/dhcpcd-6.10.2/work/dhcpcd-6.10.2 ... ./configure --prefix=/usr --build=x86_64-pc-linux-gnu --host=x86_64-pc-linux-gnu --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc --localstatedir=/var/lib --libdir=/lib64 --prefix= --libexecdir=/lib/dhcpcd --dbdir=/var/lib/dhcpcd --localstatedir=/var --rundir=/run --enable-embedded --enable-ipv6 CC=x86_64-pc-linux-gnu-gcc --with-hook=ntp.conf --with-hook=yp.conf configure args: --prefix=/usr --build=x86_64-pc-linux-gnu --host=x86_64-pc-linux-gnu --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc --localstatedir=/var/lib --libdir=/lib64 --prefix= --libexecdir=/lib/dhcpcd --dbdir=/var/lib/dhcpcd --localstatedir=/var --rundir=/run --enable-embedded --enable-ipv6 CC=x86_64-pc-linux-gnu-gcc --with-hook=ntp.conf --with-hook=yp.conf Deriving operating system from ... x86_64-pc-linux-gnu Configuring dhcpcd for ... linux dhcpcd-definitions.conf will be embedded in dhcpcd itself Using compiler .. x86_64-pc-linux-gnu-gcc x86_64-pc-linux-gnu-gcc (Funtoo 4.9.3-r3) 4.9.3 Testing for nl80211 ... yes Testing for IN6_ADDR_GEN_MODE_NONE ... yes Testing for getifaddrs ... yes Testing for clock_gettime ... yes Testing for inet_ntoa ... yes Testing for arc4random ... no Testing for arc4random_uniform ... no Testing for closefrom ... no Testing for getline ... no Testing for strlcpy ... no Testing for pidfile_lock ... no Testing for strtoi ... no Testing for dprintf ... yes Testing for printf %m support ...yes Testing for TAILQ_FOREACH_SAFE ... no Testing for TAILQ_CONCAT ...yes Testing for posix_spawn ... yes Testing for kqueue1 ... no Testing for kqueue ... no Testing for epoll ... yes Testing for be64enc ... no Testing for fls64 ... no Testing for MD5Init ... no Testing for sha2.h ... no Testing for SHA256_Init ... no Testing for SHA256Init ... no Checking for libudev ... yes Checking udev_monitor_filter_add_match_subsystem_devtype ... yes Checking udev_device_get_is_initialized ... yes Testing for dlopen ... yes (-ldl) Checking for ntpd ... not found Checking for chronyd ... not found Checking for ypbind ... not found Finding hook ntp.conf ... 50-ntp.conf Finding hook yp.conf ... 50-yp.conf SYSCONFDIR = /etc SBINDIR = /sbin LIBDIR = /lib64 LIBEXECDIR = /lib/dhcpcd DBDIR = /var/lib/dhcpcd RUNDIR = /run MANDIR = /usr/share/man DATADIR = /usr/share HOOKSCRIPTS = 50-ntp.conf 50-yp.conf EGHOOKSCRIPTS = STATUSARG = >>> Source configured. >>> Compiling source in /var/tmp/portage/net-misc/dhcpcd-6.10.2/work/dhcpcd-6.10.2 ... make -j5 x86_64-pc-linux-gnu-gcc -march=core2 -O2 -pipe -std=c99 -march=core2 -O2 -pipe -DNDEBUG -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -DINET -DINET6 -DPLUGIN_DEV -I./crypt -c common.c -o common.o x86_64-pc-linux-gnu-gcc -march=core2 -O2 -pipe -std=c99 -march=core2 -O2 -pipe -DNDEBUG -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -DINET -DINET6 -DPLUGIN_DEV -I./crypt -c control.c -o control.o x86_64-pc-linux-gnu-gcc -march=core2 -O2 -pipe -std=c99 -march=core2 -O2 -pipe -DNDEBUG -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -DINET -DINET6 -DPLUGIN_DEV -I./crypt -c dhcpcd.c -o dhcpcd.o x86_64-pc-linux-gnu-gcc -march=core2 -O2 -pipe -std=c99 -march=core2 -O2 -pipe -DNDEBUG -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -DINET -DINET6 -DPLUGIN_DEV -I./crypt -c duid.c -o duid.o x86_64-pc-linux-gnu-gcc -march=core2 -O2 -pipe -std=c99 -march=core2 -O2 -pipe -DNDEBUG -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -DINET -DINET6 -DPLUGIN_DEV -I./crypt -c eloop.c -o eloop.o eloop.c:135:19: fatal error: queue.h: No such file or directory #include "queue.h" ^ compilation terminated. Makefile:84: recipe for target 'eloop.o' failed make: *** [eloop.o] Error 1 make: *** Waiting for unfinished jobs.... * ERROR: net-misc/dhcpcd-6.10.2::gentoo failed (compile phase): * emake failed * * If you need support, post the output of `emerge --info '=net-misc/dhcpcd-6.10.2::gentoo'`, * the complete build log and the output of `emerge -pqv '=net-misc/dhcpcd-6.10.2::gentoo'`. * The complete build log is located at '/var/tmp/portage/net-misc/dhcpcd-6.10.2/temp/build.log'. * The ebuild environment file is located at '/var/tmp/portage/net-misc/dhcpcd-6.10.2/temp/environment'. * Working directory: '/var/tmp/portage/net-misc/dhcpcd-6.10.2/work/dhcpcd-6.10.2' * S: '/var/tmp/portage/net-misc/dhcpcd-6.10.2/work/dhcpcd-6.10.2' >>> Failed to emerge net-misc/dhcpcd-6.10.2, Log file: >>> '/var/tmp/portage/net-misc/dhcpcd-6.10.2/temp/build.log' * Messages for package net-misc/dhcpcd-6.10.2: * ERROR: net-misc/dhcpcd-6.10.2::gentoo failed (compile phase): * emake failed * * If you need support, post the output of `emerge --info '=net-misc/dhcpcd-6.10.2::gentoo'`, * the complete build log and the output of `emerge -pqv '=net-misc/dhcpcd-6.10.2::gentoo'`. * The complete build log is located at '/var/tmp/portage/net-misc/dhcpcd-6.10.2/temp/build.log'. * The ebuild environment file is located at '/var/tmp/portage/net-misc/dhcpcd-6.10.2/temp/environment'. * Working directory: '/var/tmp/portage/net-misc/dhcpcd-6.10.2/work/dhcpcd-6.10.2' * S: '/var/tmp/portage/net-misc/dhcpcd-6.10.2/work/dhcpcd-6.10.2' * * The following package has failed to build, install, or execute postinst: * * (net-misc/dhcpcd-6.10.2:0/0::gentoo, ebuild scheduled for merge), Log file: * '/var/tmp/portage/net-misc/dhcpcd-6.10.2/temp/build.log' * Link to comment Share on other sites More sharing options...
0 cardinal Posted April 22, 2016 Report Share Posted April 22, 2016 Funtoo user repo is ports-2012.git funtoo rj # emerge --sync >>> Syncing repository 'gentoo' into '/usr/portage'... /usr/bin/git pull Already up-to-date. === Sync completed for gentoo * In post-repository hook for gentoo ** synced from remote repository git://github.com/funtoo/ports-2012.git ** synced into /usr/portage Reading Portage settings .. Building database (/var/cache/eix/portage.eix) .. [0] 'gentoo' /usr/portage/ (cache: metadata-md5-or-flat) Reading category 164|164 (100%) Finished [1] 'rj' /usr/local/portage (cache: parse|ebuild*#metadata-md5#metadata-assign#assign) Reading category 164|164 (100%) Finished Applying masks .. Calculating hash tables .. Writing database file /var/cache/eix/portage.eix .. Database contains 19094 packages in 164 categories. Diffing databases (19094 -> 19094 packages) rj@funtoo ~ $ cat /etc/portage/repos.conf/gentoo [DEFAULT] main-repo = gentoo [gentoo] location = /usr/portage sync-type = git sync-uri = git://github.com/funtoo/ports-2012.git auto-sync = yes Your syncing funtoo-overlay.git which is development/testing, not for users. This could cause a problem, dhcpcd-6.10.2 merges on my current funtoo. # emerge --sync >>> Syncing repository 'gentoo' into '/usr/portage'... /usr/bin/git pull Already up-to-date. === Sync completed for gentoo q: Updating ebuild cache in /usr/portage ... q: Finished 39891 entries in 0.330852 seconds >>> Syncing repository 'funtoo-overlay' into '/var/portage/funtoo-overlay'... /usr/bin/git pull Already up-to-date. === Sync completed for funtoo-overlay q: Updating ebuild cache in /var/portage/funtoo-overlay ... q: Finished 327 entries in 0.003057 seconds Link to comment Share on other sites More sharing options...
0 Oleg Vinichenko Posted April 28, 2016 Report Share Posted April 28, 2016 should be fixed with tree update. Link to comment Share on other sites More sharing options...
0 fanfoue Posted May 3, 2016 Author Report Share Posted May 3, 2016 ok guys, thanks for the answer ! I removed the funtoo overlay. Link to comment Share on other sites More sharing options...
Question
fanfoue
Hello all,
I'm new to funtoo (and gentoo), I installed my system one month ago.
I'm getting trouble with a world update : dhcpcd build fails to find a "queue.h" include.
By the way, my network card is statically configured, I would like to unmerge dhcpcd. But it's not in the world file and I could manage to mask it...
Thanks for the help !
# emerge --sync >>> Syncing repository 'gentoo' into '/usr/portage'... /usr/bin/git pull Already up-to-date. === Sync completed for gentoo q: Updating ebuild cache in /usr/portage ... q: Finished 39891 entries in 0.330852 seconds >>> Syncing repository 'funtoo-overlay' into '/var/portage/funtoo-overlay'... /usr/bin/git pull Already up-to-date. === Sync completed for funtoo-overlay q: Updating ebuild cache in /var/portage/funtoo-overlay ... q: Finished 327 entries in 0.003057 seconds # emerge -a --keep-going --update --newuse --deep --with-bdeps=y world These are the packages that would be merged, in order: Calculating dependencies... done! [ebuild N ] net-misc/dhcpcd-6.10.2 USE="embedded ipv6 udev" Would you like to merge these packages? [Yes/No] >>> Verifying ebuild manifests >>> Emerging (1 of 1) net-misc/dhcpcd-6.10.2::gentoo * dhcpcd-6.10.2.tar.xz SHA256 SHA512 WHIRLPOOL size ;-) ... [ ok ] >>> Unpacking source... >>> Unpacking dhcpcd-6.10.2.tar.xz to /var/tmp/portage/net-misc/dhcpcd-6.10.2/work >>> Source unpacked in /var/tmp/portage/net-misc/dhcpcd-6.10.2/work >>> Preparing source in /var/tmp/portage/net-misc/dhcpcd-6.10.2/work/dhcpcd-6.10.2 ... >>> Source prepared. >>> Configuring source in /var/tmp/portage/net-misc/dhcpcd-6.10.2/work/dhcpcd-6.10.2 ... ./configure --prefix=/usr --build=x86_64-pc-linux-gnu --host=x86_64-pc-linux-gnu --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc --localstatedir=/var/lib --libdir=/lib64 --prefix= --libexecdir=/lib/dhcpcd --dbdir=/var/lib/dhcpcd --localstatedir=/var --rundir=/run --enable-embedded --enable-ipv6 CC=x86_64-pc-linux-gnu-gcc --with-hook=ntp.conf --with-hook=yp.conf configure args: --prefix=/usr --build=x86_64-pc-linux-gnu --host=x86_64-pc-linux-gnu --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc --localstatedir=/var/lib --libdir=/lib64 --prefix= --libexecdir=/lib/dhcpcd --dbdir=/var/lib/dhcpcd --localstatedir=/var --rundir=/run --enable-embedded --enable-ipv6 CC=x86_64-pc-linux-gnu-gcc --with-hook=ntp.conf --with-hook=yp.conf Deriving operating system from ... x86_64-pc-linux-gnu Configuring dhcpcd for ... linux dhcpcd-definitions.conf will be embedded in dhcpcd itself Using compiler .. x86_64-pc-linux-gnu-gcc x86_64-pc-linux-gnu-gcc (Funtoo 4.9.3-r3) 4.9.3 Testing for nl80211 ... yes Testing for IN6_ADDR_GEN_MODE_NONE ... yes Testing for getifaddrs ... yes Testing for clock_gettime ... yes Testing for inet_ntoa ... yes Testing for arc4random ... no Testing for arc4random_uniform ... no Testing for closefrom ... no Testing for getline ... no Testing for strlcpy ... no Testing for pidfile_lock ... no Testing for strtoi ... no Testing for dprintf ... yes Testing for printf %m support ...yes Testing for TAILQ_FOREACH_SAFE ... no Testing for TAILQ_CONCAT ...yes Testing for posix_spawn ... yes Testing for kqueue1 ... no Testing for kqueue ... no Testing for epoll ... yes Testing for be64enc ... no Testing for fls64 ... no Testing for MD5Init ... no Testing for sha2.h ... no Testing for SHA256_Init ... no Testing for SHA256Init ... no Checking for libudev ... yes Checking udev_monitor_filter_add_match_subsystem_devtype ... yes Checking udev_device_get_is_initialized ... yes Testing for dlopen ... yes (-ldl) Checking for ntpd ... not found Checking for chronyd ... not found Checking for ypbind ... not found Finding hook ntp.conf ... 50-ntp.conf Finding hook yp.conf ... 50-yp.conf SYSCONFDIR = /etc SBINDIR = /sbin LIBDIR = /lib64 LIBEXECDIR = /lib/dhcpcd DBDIR = /var/lib/dhcpcd RUNDIR = /run MANDIR = /usr/share/man DATADIR = /usr/share HOOKSCRIPTS = 50-ntp.conf 50-yp.conf EGHOOKSCRIPTS = STATUSARG = >>> Source configured. >>> Compiling source in /var/tmp/portage/net-misc/dhcpcd-6.10.2/work/dhcpcd-6.10.2 ... make -j5 x86_64-pc-linux-gnu-gcc -march=core2 -O2 -pipe -std=c99 -march=core2 -O2 -pipe -DNDEBUG -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -DINET -DINET6 -DPLUGIN_DEV -I./crypt -c common.c -o common.o x86_64-pc-linux-gnu-gcc -march=core2 -O2 -pipe -std=c99 -march=core2 -O2 -pipe -DNDEBUG -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -DINET -DINET6 -DPLUGIN_DEV -I./crypt -c control.c -o control.o x86_64-pc-linux-gnu-gcc -march=core2 -O2 -pipe -std=c99 -march=core2 -O2 -pipe -DNDEBUG -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -DINET -DINET6 -DPLUGIN_DEV -I./crypt -c dhcpcd.c -o dhcpcd.o x86_64-pc-linux-gnu-gcc -march=core2 -O2 -pipe -std=c99 -march=core2 -O2 -pipe -DNDEBUG -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -DINET -DINET6 -DPLUGIN_DEV -I./crypt -c duid.c -o duid.o x86_64-pc-linux-gnu-gcc -march=core2 -O2 -pipe -std=c99 -march=core2 -O2 -pipe -DNDEBUG -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -DINET -DINET6 -DPLUGIN_DEV -I./crypt -c eloop.c -o eloop.o eloop.c:135:19: fatal error: queue.h: No such file or directory #include "queue.h" ^ compilation terminated. Makefile:84: recipe for target 'eloop.o' failed make: *** [eloop.o] Error 1 make: *** Waiting for unfinished jobs.... * ERROR: net-misc/dhcpcd-6.10.2::gentoo failed (compile phase): * emake failed * * If you need support, post the output of `emerge --info '=net-misc/dhcpcd-6.10.2::gentoo'`, * the complete build log and the output of `emerge -pqv '=net-misc/dhcpcd-6.10.2::gentoo'`. * The complete build log is located at '/var/tmp/portage/net-misc/dhcpcd-6.10.2/temp/build.log'. * The ebuild environment file is located at '/var/tmp/portage/net-misc/dhcpcd-6.10.2/temp/environment'. * Working directory: '/var/tmp/portage/net-misc/dhcpcd-6.10.2/work/dhcpcd-6.10.2' * S: '/var/tmp/portage/net-misc/dhcpcd-6.10.2/work/dhcpcd-6.10.2' >>> Failed to emerge net-misc/dhcpcd-6.10.2, Log file: >>> '/var/tmp/portage/net-misc/dhcpcd-6.10.2/temp/build.log' * Messages for package net-misc/dhcpcd-6.10.2: * ERROR: net-misc/dhcpcd-6.10.2::gentoo failed (compile phase): * emake failed * * If you need support, post the output of `emerge --info '=net-misc/dhcpcd-6.10.2::gentoo'`, * the complete build log and the output of `emerge -pqv '=net-misc/dhcpcd-6.10.2::gentoo'`. * The complete build log is located at '/var/tmp/portage/net-misc/dhcpcd-6.10.2/temp/build.log'. * The ebuild environment file is located at '/var/tmp/portage/net-misc/dhcpcd-6.10.2/temp/environment'. * Working directory: '/var/tmp/portage/net-misc/dhcpcd-6.10.2/work/dhcpcd-6.10.2' * S: '/var/tmp/portage/net-misc/dhcpcd-6.10.2/work/dhcpcd-6.10.2' * * The following package has failed to build, install, or execute postinst: * * (net-misc/dhcpcd-6.10.2:0/0::gentoo, ebuild scheduled for merge), Log file: * '/var/tmp/portage/net-misc/dhcpcd-6.10.2/temp/build.log' *Link to comment
Share on other sites
3 answers to this question
Recommended Posts