linuxbigot Posted June 8, 2015 Report Share Posted June 8, 2015 need asap help or sadly will quit... tryin to install networkmanager and wicd = NO eth0 / no wifi working...useless system w/o inet I have in my hand systemrescue,no way to reinstall,if it is possible to fix this mess... tia! Link to comment Share on other sites More sharing options...
0 spectromas Posted June 8, 2015 Report Share Posted June 8, 2015 Errors, logs, output? What do you expect us to do for you? http://www.catb.org/~esr/faqs/smart-questions.html Link to comment Share on other sites More sharing options...
0 666threesixes666 Posted June 8, 2015 Report Share Posted June 8, 2015 post lspci -k on live media... post dmesg... Link to comment Share on other sites More sharing options...
0 linuxbigot Posted June 8, 2015 Author Report Share Posted June 8, 2015 post lspci -k on live media... post dmesg... # lspci -k 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) Subsystem: Acer Incorporated [ALI] 2nd Generation Core Processor Family DRAM Controller 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) Subsystem: Acer Incorporated [ALI] 2nd Generation Core Processor Family Integrated Graphics Controller Kernel driver in use: i915 Kernel modules: i915 00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04) Subsystem: Acer Incorporated [ALI] 7 Series/C210 Series Chipset Family MEI Controller Kernel driver in use: mei_me Kernel modules: mei_me 00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) Subsystem: Acer Incorporated [ALI] 7 Series/C210 Series Chipset Family USB Enhanced Host Controller Kernel driver in use: ehci-pci Kernel modules: ehci_pci 00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04) Subsystem: Acer Incorporated [ALI] 7 Series/C210 Series Chipset Family High Definition Audio Controller Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel 00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.2 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 (rev c4) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.7 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 8 (rev c4) Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) Subsystem: Acer Incorporated [ALI] 7 Series/C210 Series Chipset Family USB Enhanced Host Controller Kernel driver in use: ehci-pci Kernel modules: ehci_pci 00:1f.0 ISA bridge: Intel Corporation HM77 Express Chipset LPC Controller (rev 04) Subsystem: Acer Incorporated [ALI] HM77 Express Chipset LPC Controller Kernel driver in use: lpc_ich Kernel modules: lpc_ich 00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04) Subsystem: Acer Incorporated [ALI] 7 Series Chipset Family 6-port SATA Controller [AHCI mode] Kernel driver in use: ahci Kernel modules: ahci 00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04) Subsystem: Acer Incorporated [ALI] 7 Series/C210 Series Chipset Family SMBus Controller Kernel modules: i2c_i801 04:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5289 (rev 01) Subsystem: Acer Incorporated [ALI] Device 0719 Kernel driver in use: rtsx_pci Kernel modules: rtsx_pci 04:00.2 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 0a) Subsystem: Acer Incorporated [ALI] RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller Kernel driver in use: r8169 Kernel modules: r8169 09:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01) Subsystem: Foxconn International, Inc. BCM4313 802.11bgn Wireless Network Adapter Kernel driver in use: bcma-pci-bridge Kernel modules: bcma dmesg [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.19.3-1~exp1 (root@sysresccd) (gcc version 4.9.2 (Funtoo 4.9.2-r1) ) #1 SMP Fri Jun 5 18:19:20 2015 [ 0.000000] Command line: BOOT_IMAGE=/boot/kernel-debian-sources-x86_64-3.19.3-1~exp1 root=/dev/sda4 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x0000000075abefff] usable [ 0.000000] BIOS-e820: [mem 0x0000000075abf000-0x0000000075ebefff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000075ebf000-0x0000000075fbefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000075fbf000-0x0000000075ffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x0000000075fff000-0x0000000075ffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000076000000-0x000000007e9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001005fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Acer Aspire E1-431/EA40_HC, BIOS V1.17 04/25/2012 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] AGP: No AGP bridge found [ 0.000000] e820: last_pfn = 0x100600 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-E7FFF write-protect [ 0.000000] E8000-EFFFF write-combining [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 076000000 mask FFE000000 uncachable [ 0.000000] 2 base 078000000 mask FF8000000 uncachable [ 0.000000] 3 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 4 base 100000000 mask FFF800000 write-back [ 0.000000] 5 base 100600000 mask FFFE00000 uncachable [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC [ 0.000000] e820: last_pfn = 0x76000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0] [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] reserving inaccessible SNB gfx pages [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01b31000, 0x01b31fff] PGTABLE [ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE [ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x100400000-0x1005fffff] [ 0.000000] [mem 0x100400000-0x1005fffff] page 2M [ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1003fffff] [ 0.000000] [mem 0x100000000-0x1003fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x60000000-0x75abefff] [ 0.000000] [mem 0x60000000-0x759fffff] page 2M [ 0.000000] [mem 0x75a00000-0x75abefff] page 4k [ 0.000000] BRK [0x01b35000, 0x01b35fff] PGTABLE [ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x75fff000-0x75ffffff] [ 0.000000] [mem 0x75fff000-0x75ffffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x40200000-0x5fffffff] [ 0.000000] [mem 0x40200000-0x5fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff] [ 0.000000] [mem 0x20200000-0x3fffffff] page 2M [ 0.000000] RAMDISK: [mem 0x371b0000-0x378cffff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 ACRSYS) [ 0.000000] ACPI: XSDT 0x0000000075FFE210 00009C (v01 ACRSYS ACRPRDCT 00000001 01000013) [ 0.000000] ACPI: FACP 0x0000000075FFB000 00010C (v05 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: DSDT 0x0000000075FED000 00ADB8 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000) [ 0.000000] ACPI: FACS 0x0000000075FBB000 000040 [ 0.000000] ACPI: UEFI 0x0000000075FFD000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: ASF! 0x0000000075FFC000 0000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: HPET 0x0000000075FFA000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: APIC 0x0000000075FF9000 00008C (v03 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: MCFG 0x0000000075FF8000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: SLIC 0x0000000075FEC000 000176 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: WDAT 0x0000000075FEB000 000224 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: SSDT 0x0000000075FE9000 001068 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000) [ 0.000000] ACPI: BOOT 0x0000000075FE7000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: ASPT 0x0000000075FE2000 000034 (v07 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: MSDM 0x0000000075FE1000 000055 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: FPDT 0x0000000075FDF000 000044 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: SSDT 0x0000000075FDE000 00081E (v01 ACRSYS ACRPRDCT 00003000 1025 00040000) [ 0.000000] ACPI: SSDT 0x0000000075FDD000 000A92 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000001005fffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x1005fb000-0x1005fefff] [ 0.000000] [ffffea0000000000-ffffea00041fffff] PMD -> [ffff880073600000-ffff8800755fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x1005fffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0x1fffffff] [ 0.000000] node 0: [mem 0x20200000-0x3fffffff] [ 0.000000] node 0: [mem 0x40200000-0x75abefff] [ 0.000000] node 0: [mem 0x75fff000-0x75ffffff] [ 0.000000] node 0: [mem 0x100000000-0x1005fffff] [ 0.000000] Initmem setup node 0 [mem 0x00001000-0x1005fffff] [ 0.000000] On node 0 totalpages: 482396 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 156 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7451 pages used for memmap [ 0.000000] DMA32 zone: 476864 pages, LIFO batch:31 [ 0.000000] Normal zone: 24 pages used for memmap [ 0.000000] Normal zone: 1536 pages, LIFO batch:0 [ 0.000000] Reserving Intel graphics stolen memory at 0x76a00000-0x7e9fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 6 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x75abf000-0x75ebefff] [ 0.000000] PM: Registered nosave memory: [mem 0x75ebf000-0x75fbefff] [ 0.000000] PM: Registered nosave memory: [mem 0x75fbf000-0x75ffefff] [ 0.000000] PM: Registered nosave memory: [mem 0x76000000-0x7e9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x7ea00000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff] [ 0.000000] e820: [mem 0x7ea00000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff880100200000 s87104 r8192 d31680 u262144 [ 0.000000] pcpu-alloc: s87104 r8192 d31680 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 474701 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/kernel-debian-sources-x86_64-3.19.3-1~exp1 root=/dev/sda4 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240 using standard form [ 0.000000] AGP: Checking aperture... [ 0.000000] AGP: No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 1810096K/1929584K available (5966K kernel code, 1134K rwdata, 2016K rodata, 1268K init, 832K bss, 119488K reserved, 0K cma-reserved) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS:33024 nr_irqs:488 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1696.118 MHz processor [ 0.000046] Calibrating delay loop (skipped), value calculated using timer frequency.. 3392.23 BogoMIPS (lpj=6784472) [ 0.000177] pid_max: default: 32768 minimum: 301 [ 0.000249] ACPI: Core revision 20141107 [ 0.010703] ACPI: All ACPI Tables successfully acquired [ 0.021976] Security Framework initialized [ 0.022047] AppArmor: AppArmor disabled by boot time parameter [ 0.022112] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.022399] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.023099] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.023475] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.023548] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.023892] Initializing cgroup subsys memory [ 0.023963] Initializing cgroup subsys devices [ 0.024029] Initializing cgroup subsys freezer [ 0.024094] Initializing cgroup subsys net_cls [ 0.024158] Initializing cgroup subsys blkio [ 0.024223] Initializing cgroup subsys perf_event [ 0.024289] Initializing cgroup subsys net_prio [ 0.024381] CPU: Physical Processor ID: 0 [ 0.024444] CPU: Processor Core ID: 0 [ 0.024510] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.024603] mce: CPU supports 7 MCE banks [ 0.024679] CPU0: Thermal monitoring enabled (TM1) [ 0.024754] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.024974] Freeing SMP alternatives memory: 20K (ffffffff81a5a000 - ffffffff81a5f000) [ 0.026577] ftrace: allocating 23725 entries in 93 pages [ 0.042068] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.081838] smpboot: CPU0: Intel(R) Celeron(R) CPU B820 @ 1.70GHz (fam: 06, model: 2a, stepping: 07) [ 0.082547] TSC deadline timer enabled [ 0.082578] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver. [ 0.082895] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode [ 0.082979] ... version: 3 [ 0.083041] ... bit width: 48 [ 0.083103] ... generic registers: 8 [ 0.083165] ... value mask: 0000ffffffffffff [ 0.083229] ... max period: 0000ffffffffffff [ 0.083294] ... fixed-purpose events: 3 [ 0.083356] ... event mask: 00000007000000ff [ 0.084243] x86: Booting SMP configuration: [ 0.084307] .... node #0, CPUs: #1 [ 0.097501] x86: Booted up 1 node, 2 CPUs [ 0.097621] smpboot: Total of 2 processors activated (6784.47 BogoMIPS) [ 0.097767] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.099437] devtmpfs: initialized [ 0.102590] PM: Registering ACPI NVS region [mem 0x75ebf000-0x75fbefff] (1048576 bytes) [ 0.102882] pinctrl core: initialized pinctrl subsystem [ 0.103127] NET: Registered protocol family 16 [ 0.113521] cpuidle: using governor ladder [ 0.123249] cpuidle: using governor menu [ 0.123418] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.123501] ACPI: bus type PCI registered [ 0.123564] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.123747] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.123832] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.124318] PCI: Using configuration type 1 for base access [ 0.124531] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.124597] mtrr: probably your BIOS does not setup all CPUs. [ 0.124661] mtrr: corrected configuration. [ 0.134154] ACPI: Added _OSI(Module Device) [ 0.134219] ACPI: Added _OSI(Processor Device) [ 0.134281] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.134345] ACPI: Added _OSI(Processor Aggregator Device) [ 0.137774] ACPI: Executed 1 blocks of module-level executable AML code [ 0.141169] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.142042] ACPI: Dynamic OEM Table Load: [ 0.142198] ACPI: SSDT 0xFFFF88006F341000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20111123) [ 0.143090] ACPI: Dynamic OEM Table Load: [ 0.143244] ACPI: SSDT 0xFFFF88006F335800 000303 (v01 PmRef ApIst 00003000 INTL 20111123) [ 0.144047] ACPI: Dynamic OEM Table Load: [ 0.144198] ACPI: SSDT 0xFFFF88006F19C400 000119 (v01 PmRef ApCst 00003000 INTL 20111123) [ 0.145319] ACPI: Interpreter enabled [ 0.145388] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580) [ 0.145558] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580) [ 0.145742] ACPI: (supports S0 S3 S4 S5) [ 0.145804] ACPI: Using IOAPIC for interrupt routing [ 0.145904] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.152896] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.152969] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.153147] \_SB_.PCI0:_OSC invalid UUID [ 0.153149] _OSC request data:1 1f 0 [ 0.153154] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM [ 0.154172] PCI host bridge to bus 0000:00 [ 0.154237] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.154303] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.154370] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.154437] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.154505] pci_bus 0000:00: root bus resource [mem 0x7ea00000-0xfeafffff] [ 0.154581] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 [ 0.154704] pci 0000:00:02.0: [8086:0106] type 00 class 0x030000 [ 0.154718] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x903fffff 64bit] [ 0.154726] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref] [ 0.154732] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] [ 0.154888] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000 [ 0.154915] pci 0000:00:16.0: reg 0x10: [mem 0x90704000-0x9070400f 64bit] [ 0.155005] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.155129] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 [ 0.155404] pci 0000:00:1a.0: reg 0x10: [mem 0x90709000-0x907093ff] [ 0.156905] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.156980] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.157108] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 [ 0.157130] pci 0000:00:1b.0: reg 0x10: [mem 0x90700000-0x90703fff 64bit] [ 0.157222] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.157277] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.157400] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 [ 0.157503] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.157559] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.157681] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400 [ 0.157781] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.157837] pci 0000:00:1c.2: System wakeup disabled by ACPI [ 0.157969] pci 0000:00:1c.7: [8086:1e1e] type 01 class 0x060400 [ 0.158112] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold [ 0.158175] pci 0000:00:1c.7: System wakeup disabled by ACPI [ 0.158299] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 [ 0.158556] pci 0000:00:1d.0: reg 0x10: [mem 0x90708000-0x907083ff] [ 0.160057] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.160127] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.160253] pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100 [ 0.160472] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601 [ 0.160496] pci 0000:00:1f.2: reg 0x10: [io 0x3088-0x308f] [ 0.160506] pci 0000:00:1f.2: reg 0x14: [io 0x3094-0x3097] [ 0.160516] pci 0000:00:1f.2: reg 0x18: [io 0x3080-0x3087] [ 0.160526] pci 0000:00:1f.2: reg 0x1c: [io 0x3090-0x3093] [ 0.160536] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f] [ 0.160545] pci 0000:00:1f.2: reg 0x24: [mem 0x90707000-0x907077ff] [ 0.160603] pci 0000:00:1f.2: PME# supported from D3hot [ 0.160705] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 [ 0.160726] pci 0000:00:1f.3: reg 0x10: [mem 0x90705000-0x907050ff 64bit] [ 0.160751] pci 0000:00:1f.3: reg 0x20: [io 0x3040-0x305f] [ 0.160947] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.161129] pci 0000:04:00.0: [10ec:5289] type 00 class 0xff0000 [ 0.161157] pci 0000:04:00.0: reg 0x10: [mem 0x90600000-0x9060ffff] [ 0.161352] pci 0000:04:00.0: supports D1 D2 [ 0.161354] pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.161400] pci 0000:04:00.0: System wakeup disabled by ACPI [ 0.161538] pci 0000:04:00.2: [10ec:8168] type 00 class 0x020000 [ 0.161565] pci 0000:04:00.2: reg 0x10: [io 0x2000-0x20ff] [ 0.161603] pci 0000:04:00.2: reg 0x18: [mem 0x90404000-0x90404fff 64bit pref] [ 0.161627] pci 0000:04:00.2: reg 0x20: [mem 0x90400000-0x90403fff 64bit pref] [ 0.161742] pci 0000:04:00.2: supports D1 D2 [ 0.161744] pci 0000:04:00.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.167586] pci 0000:00:1c.2: PCI bridge to [bus 04] [ 0.167677] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff] [ 0.167692] pci 0000:00:1c.2: bridge window [mem 0x90600000-0x906fffff] [ 0.167700] pci 0000:00:1c.2: bridge window [mem 0x90400000-0x904fffff 64bit pref] [ 0.167867] pci 0000:09:00.0: [14e4:4727] type 00 class 0x028000 [ 0.167904] pci 0000:09:00.0: reg 0x10: [mem 0x90500000-0x90503fff 64bit] [ 0.168111] pci 0000:09:00.0: supports D1 D2 [ 0.168113] pci 0000:09:00.0: PME# supported from D0 D3hot D3cold [ 0.168161] pci 0000:09:00.0: System wakeup disabled by ACPI [ 0.175613] pci 0000:00:1c.7: PCI bridge to [bus 09] [ 0.175710] pci 0000:00:1c.7: bridge window [mem 0x90500000-0x905fffff] [ 0.176316] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7 [ 0.177001] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.177629] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.178255] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.178880] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.179612] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.180237] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.180864] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *7 [ 0.181737] ACPI: Enabled 4 GPEs in block 00 to 3F [ 0.181947] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.182165] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.182231] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.182314] vgaarb: loaded [ 0.182375] vgaarb: bridge control possible 0000:00:02.0 [ 0.182569] PCI: Using ACPI for IRQ routing [ 0.190277] PCI: pci_cache_line_size set to 64 bytes [ 0.190374] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.190376] e820: reserve RAM buffer [mem 0x75abf000-0x77ffffff] [ 0.190378] e820: reserve RAM buffer [mem 0x76000000-0x77ffffff] [ 0.190380] e820: reserve RAM buffer [mem 0x100600000-0x103ffffff] [ 0.190581] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.191023] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.193122] Switched to clocksource hpet [ 0.202293] pnp: PnP ACPI init [ 0.202540] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.202608] system 00:00: [io 0x1000-0x100f] has been reserved [ 0.202675] system 00:00: [io 0xffff] has been reserved [ 0.202740] system 00:00: [io 0xffff] has been reserved [ 0.202806] system 00:00: [io 0x0400-0x0453] could not be reserved [ 0.202873] system 00:00: [io 0x0458-0x047f] has been reserved [ 0.202939] system 00:00: [io 0x0500-0x057f] has been reserved [ 0.203006] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.203074] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.203120] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.203193] system 00:02: [io 0x0454-0x0457] has been reserved [ 0.203261] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.203298] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.203335] pnp 00:04: Plug and Play ACPI device, IDs AUI2010 PNP0f13 (active) [ 0.203517] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.203586] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.203654] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.203722] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.203790] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved [ 0.203858] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.203925] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.203994] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved [ 0.204063] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.204131] system 00:05: [mem 0x7ea00000-0x7ea00fff] has been reserved [ 0.204199] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.204506] system 00:06: [mem 0x20000000-0x201fffff] has been reserved [ 0.204575] system 00:06: [mem 0x40000000-0x401fffff] has been reserved [ 0.204643] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.204691] pnp: PnP ACPI: found 7 devices [ 0.212072] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.212151] pci 0000:00:1c.2: PCI bridge to [bus 04] [ 0.212218] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff] [ 0.212288] pci 0000:00:1c.2: bridge window [mem 0x90600000-0x906fffff] [ 0.212359] pci 0000:00:1c.2: bridge window [mem 0x90400000-0x904fffff 64bit pref] [ 0.212446] pci 0000:00:1c.7: PCI bridge to [bus 09] [ 0.212516] pci 0000:00:1c.7: bridge window [mem 0x90500000-0x905fffff] [ 0.212595] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.212598] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.212600] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.212602] pci_bus 0000:00: resource 7 [mem 0x7ea00000-0xfeafffff] [ 0.212605] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff] [ 0.212607] pci_bus 0000:04: resource 1 [mem 0x90600000-0x906fffff] [ 0.212610] pci_bus 0000:04: resource 2 [mem 0x90400000-0x904fffff 64bit pref] [ 0.212612] pci_bus 0000:09: resource 1 [mem 0x90500000-0x905fffff] [ 0.212669] NET: Registered protocol family 2 [ 0.212977] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.213115] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [ 0.213242] TCP: Hash tables configured (established 16384 bind 16384) [ 0.213331] TCP: reno registered [ 0.213397] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 0.213474] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 0.213607] NET: Registered protocol family 1 [ 0.213686] pci 0000:00:02.0: Video device with shadowed ROM [ 0.245386] PCI: CLS 64 bytes, default 64 [ 0.245450] Unpacking initramfs... [ 1.397929] Freeing initrd memory: 7296K (ffff8800371b0000 - ffff8800378d0000) [ 1.398033] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.398102] software IO TLB [mem 0x6f600000-0x73600000] (64MB) mapped at [ffff88006f600000-ffff8800735fffff] [ 1.398213] Simple Boot Flag at 0x44 set to 0x1 [ 1.398428] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer [ 1.398581] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x26 [ 1.398655] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x26 [ 1.398797] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 1.399356] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 1.399485] audit: initializing netlink subsys (disabled) [ 1.399570] audit: type=2000 audit(1433761292.384:1): initialized [ 1.400058] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.400155] zpool: loaded [ 1.400400] VFS: Disk quotas dquot_6.5.2 [ 1.400486] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.400614] SGI XFS with ACLs, security attributes, realtime, no debug enabled [ 1.401413] alg: No test for stdrng (krng) [ 1.401510] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 1.401630] io scheduler noop registered [ 1.401703] io scheduler deadline registered [ 1.401774] io scheduler cfq registered (default) [ 1.402350] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.402436] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.402526] intel_idle: MWAIT substates: 0x120 [ 1.402528] intel_idle: v0.4 model 0x2A [ 1.402529] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.402661] GHES: HEST is not enabled! [ 1.402820] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.403453] Linux agpgart interface v0.103 [ 1.403591] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com> [ 1.403658] AMD IOMMUv2 functionality not available on this system [ 1.403805] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.405606] i8042: Detected active multiplexing controller, rev 1.1 [ 1.406354] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.406422] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 1.406520] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 1.406612] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 1.406704] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 1.406948] mousedev: PS/2 mouse device common for all mice [ 1.407069] rtc_cmos 00:01: RTC can wake from S4 [ 1.407297] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 1.407392] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs [ 1.407486] Intel P-state driver initializing. [ 1.407805] ledtrig-cpu: registered to indicate activity on CPUs [ 1.408649] TCP: cubic registered [ 1.408842] NET: Registered protocol family 10 [ 1.409406] mip6: Mobile IPv6 [ 1.409492] NET: Registered protocol family 17 [ 1.409585] mpls_gso: MPLS GSO support [ 1.410494] registered taskstats version 1 [ 1.411552] rtc_cmos 00:01: setting system clock to 2015-06-08 11:01:32 UTC (1433761292) [ 1.411897] PM: Hibernation image not present or could not be loaded. [ 1.412629] Freeing unused kernel memory: 1268K (ffffffff8191d000 - ffffffff81a5a000) [ 1.412743] Write protecting the kernel read-only data: 8192k [ 1.413260] Freeing unused kernel memory: 164K (ffff8800015d7000 - ffff880001600000) [ 1.413474] Freeing unused kernel memory: 32K (ffff8800017f8000 - ffff880001800000) [ 1.424302] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.569549] SCSI subsystem initialized [ 1.572548] libata version 3.00 loaded. [ 1.843181] ahci 0000:00:1f.2: version 3.0 [ 1.857942] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x21 impl SATA mode [ 1.857947] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst [ 1.866751] scsi host0: ahci [ 1.866978] scsi host1: ahci [ 1.867157] scsi host2: ahci [ 1.867344] scsi host3: ahci [ 1.867461] scsi host4: ahci [ 1.867581] scsi host5: ahci [ 1.867645] ata1: SATA max UDMA/133 abar m2048@0x90707000 port 0x90707100 irq 24 [ 1.867647] ata2: DUMMY [ 1.867648] ata3: DUMMY [ 1.867649] ata4: DUMMY [ 1.867650] ata5: DUMMY [ 1.867654] ata6: SATA max UDMA/133 abar m2048@0x90707000 port 0x90707380 irq 24 [ 2.186098] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.186130] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.187708] ata6.00: ATAPI: MATSHITADVD-RAM UJ8C0, 1.00, max UDMA/133 [ 2.189098] ata6.00: configured for UDMA/133 [ 2.239783] ata1.00: ATA-8: TOSHIBA MK3259GSXP, GN003J, max UDMA/100 [ 2.239797] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.240690] ata1.00: configured for UDMA/100 [ 2.240965] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK3259GS 3J PQ: 0 ANSI: 5 [ 2.243018] scsi 5:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8C0 1.00 PQ: 0 ANSI: 5 [ 2.398191] tsc: Refined TSC clocksource calibration: 1696.146 MHz [ 2.432171] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 2.432176] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 2.432270] sd 0:0:0:0: [sda] Write Protect is off [ 2.432275] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.432313] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.554024] sda: sda1 sda2 sda3 sda4 sda5 [ 2.555326] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.602610] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.602683] scsi 5:0:0:0: Attached scsi generic sg1 type 5 [ 2.661694] sr 5:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.661702] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.661959] sr 5:0:0:0: Attached scsi CD-ROM sr0 [ 2.888909] scsi: <fdomain> Detection failed (no card) [ 2.992247] GDT-HA: Storage RAID Controller Driver. Version: 3.05 [ 3.351690] Fusion MPT base driver 3.04.20 [ 3.351694] Copyright (c) 1999-2008 LSI Corporation [ 3.398702] Switched to clocksource tsc [ 3.418730] Fusion MPT SPI Host driver 3.04.20 [ 3.465021] Fusion MPT FC Host driver 3.04.20 [ 3.512445] Fusion MPT SAS Host driver 3.04.20 [ 3.545577] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000. [ 3.578657] 3ware Storage Controller device driver for Linux v1.26.02.003. [ 3.612017] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014. [ 3.648429] HP CISS Driver (v 3.6.26) [ 3.785888] Adaptec aacraid driver 1.2-0[30300]-ms [ 3.867858] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) [ 3.869600] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) [ 3.941751] megasas: 06.805.06.01-rc1 [ 3.982272] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.16-k. [ 4.023693] Emulex LightPulse Fibre Channel SCSI driver 10.4.8000.0. [ 4.023697] Copyright(c) 2004-2014 Emulex. All rights reserved. [ 4.116201] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded [ 4.169533] mpt2sas version 18.100.00.00 loaded [ 5.533817] ACPI: bus type USB registered [ 5.533849] usbcore: registered new interface driver usbfs [ 5.533861] usbcore: registered new interface driver hub [ 5.533891] usbcore: registered new device driver usb [ 5.536495] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.589440] hidraw: raw HID events driver (C) Jiri Kosina [ 5.642598] usbcore: registered new interface driver usb-storage [ 5.694166] uhci_hcd: USB Universal Host Controller Interface driver [ 5.746393] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 5.853221] usbcore: registered new interface driver usbhid [ 5.853225] usbhid: USB HID core driver [ 7.009406] device-mapper: uevent: version 1.0.3 [ 7.009486] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com [ 7.484331] async_tx: api initialized (async) [ 7.522108] xor: measuring software checksum speed [ 7.560519] prefetch64-sse: 9538.000 MB/sec [ 7.600537] generic_sse: 8751.000 MB/sec [ 7.600539] xor: using function: prefetch64-sse (9538.000 MB/sec) [ 7.680584] raid6: sse2x1 4579 MB/s [ 7.748612] raid6: sse2x2 5677 MB/s [ 7.816641] raid6: sse2x4 6583 MB/s [ 7.816643] raid6: using algorithm sse2x4 (6583 MB/s) [ 7.816644] raid6: using ssse3x2 recovery algorithm [ 7.843459] md: raid6 personality registered for level 6 [ 7.843463] md: raid5 personality registered for level 5 [ 7.843465] md: raid4 personality registered for level 4 [ 7.859139] md: raid1 personality registered for level 1 [ 7.873000] md: raid10 personality registered for level 10 [ 7.880332] device-mapper: raid: Loading target version 1.6.0 [ 8.009961] md: raid0 personality registered for level 0 [ 8.286401] md: linear personality registered for level -1 [ 8.354350] md: multipath personality registered for level -4 [ 8.554127] Btrfs loaded [ 8.689729] JFS: nTxBlock = 8192, nTxLock = 65536 [ 8.801190] RPC: Registered named UNIX socket transport module. [ 8.801194] RPC: Registered udp transport module. [ 8.801196] RPC: Registered tcp transport module. [ 8.801197] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 8.818250] FS-Cache: Loaded [ 8.824254] FS-Cache: Netfs 'nfs' registered for caching [ 8.898153] fuse init (API version 7.23) [ 8.979382] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 8.979387] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 9.072609] pps_core: LinuxPPS API ver. 1 registered [ 9.072613] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 9.074255] PTP clock support registered [ 9.175485] Loading iSCSI transport class v2.0-870. [ 9.345412] iscsi: registered transport (tcp) [ 10.348656] BTRFS: device fsid 24336066-374d-41de-b3a5-72cecc4ea72a devid 1 transid 2836 /dev/sda4 [ 10.349242] BTRFS info (device sda4): disk space caching is enabled [ 10.349248] BTRFS: has skinny extents [ 12.620561] random: nonblocking pool is initialized [ 12.763931] udevd[18025]: starting version 1.5.3 [ 13.471042] ehci-pci: EHCI PCI platform driver [ 13.471401] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 13.471416] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 13.471443] ehci-pci 0000:00:1a.0: debug port 2 [ 13.475378] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 13.475409] ehci-pci 0000:00:1a.0: irq 16, io mem 0x90709000 [ 13.487281] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 13.487386] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 13.487391] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 13.487394] usb usb1: Product: EHCI Host Controller [ 13.487397] usb usb1: Manufacturer: Linux 3.19.3-1~exp1 ehci_hcd [ 13.487401] usb usb1: SerialNumber: 0000:00:1a.0 [ 13.487677] hub 1-0:1.0: USB hub found [ 13.487689] hub 1-0:1.0: 2 ports detected [ 13.488077] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 13.488088] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 13.488111] ehci-pci 0000:00:1d.0: debug port 2 [ 13.492018] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 13.492043] ehci-pci 0000:00:1d.0: irq 23, io mem 0x90708000 [ 13.503288] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 13.503387] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 13.503390] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 13.503394] usb usb2: Product: EHCI Host Controller [ 13.503397] usb usb2: Manufacturer: Linux 3.19.3-1~exp1 ehci_hcd [ 13.503400] usb usb2: SerialNumber: 0000:00:1d.0 [ 13.507414] hub 2-0:1.0: USB hub found [ 13.507429] hub 2-0:1.0: 2 ports detected [ 13.547605] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 13.598193] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20141107/utaddress-258) [ 13.598202] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 13.598207] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20141107/utaddress-258) [ 13.598211] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 13.598213] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20141107/utaddress-258) [ 13.598217] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 13.598218] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20141107/utaddress-258) [ 13.598222] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 13.598224] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 13.642585] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5 [ 13.642593] ACPI: Power Button [PWRB] [ 13.642660] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6 [ 13.642663] ACPI: Sleep Button [SLPB] [ 13.642724] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input7 [ 13.642763] ACPI: Lid Switch [LID] [ 13.642823] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8 [ 13.642826] ACPI: Power Button [PWRF] [ 13.708241] ACPI: AC Adapter [ACAD] (on-line) [ 13.799447] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 13.819467] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 13.830989] ACPI: Battery Slot [BAT1] (battery present) [ 13.855164] thermal LNXTHERM:00: registered as thermal_zone0 [ 13.855169] ACPI: Thermal Zone [THRM] (40 C) [ 13.878851] wmi: Mapper loaded [ 13.931838] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 13.931847] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 13.932286] hub 1-1:1.0: USB hub found [ 13.932438] hub 1-1:1.0: 6 ports detected [ 13.951822] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 13.951832] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 13.952272] hub 2-1:1.0: USB hub found [ 13.952435] hub 2-1:1.0: 8 ports detected [ 13.990287] rtsx_pci 0000:04:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 26 [ 14.000279] ACPI Warning: SystemIO range 0x0000000000003040-0x000000000000305f conflicts with OpRegion 0x0000000000003040-0x000000000000304f (\_SB_.PCI0.SBUS.SMBI) (20141107/utaddress-258) [ 14.000296] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 14.005312] bcma: bus0: Found chip with id 0x4313, rev 0x01 and package 0x08 [ 14.005354] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x24, class 0x0) [ 14.005385] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x18, class 0x0) [ 14.005443] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x11, class 0x0) [ 14.018694] bcma: bus0: Bus registered [ 14.137318] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 14.137342] r8169 0000:04:00.2: can't disable ASPM; OS doesn't have ASPM control [ 14.138427] r8169 0000:04:00.2 eth0: RTL8411 at 0xffffc90000352000, 04:7d:7b:cf:41:c8, XID 08800800 IRQ 27 [ 14.138434] r8169 0000:04:00.2 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 14.171966] [drm] Initialized drm 1.1.0 20060810 [ 14.203667] usb 1-1.1: new high-speed USB device number 3 using ehci-pci [ 14.261073] iTCO_vendor_support: vendor-support=0 [ 14.353008] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 14.353057] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460) [ 14.353192] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 14.362877] usb 1-1.1: New USB device found, idVendor=1bcf, idProduct=2c18 [ 14.362888] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 14.362893] usb 1-1.1: Product: HD Webcam [ 14.362898] usb 1-1.1: Manufacturer: NC.21411.00221908ACDLM0007 [ 14.366413] [drm] Memory usable by graphics device = 2048M [ 14.366421] [drm] Replacing VGA console driver [ 14.366938] Console: switching to colour dummy device 80x25 [ 14.369138] alg: No test for crc32 (crc32-pclmul) [ 14.385154] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 14.385163] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 14.385168] sound hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 14.385171] sound hdaudioC0D0: mono: mono_out=0x0 [ 14.385175] sound hdaudioC0D0: inputs: [ 14.385180] sound hdaudioC0D0: Internal Mic=0x19 [ 14.385184] sound hdaudioC0D0: Mic=0x18 [ 14.391790] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 14.391795] [drm] Driver supports precise vblank timestamp query. [ 14.391919] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 14.414444] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 14.414609] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10 [ 14.414658] [drm] Initialized i915 1.6.0 20141121 for 0000:00:02.0 on minor 0 [ 14.429494] fbcon: inteldrmfb (fb0) is primary device [ 14.453914] input: PC Speaker as /devices/platform/pcspkr/input/input11 [ 14.467327] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input9 [ 14.467639] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 14.468347] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 14.468430] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16 [ 15.379690] input: ALPS PS/2 Device as /devices/platform/i8042/serio2/input/input17 [ 15.392650] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio2/input/input15 [ 15.428778] Console: switching to colour frame buffer device 170x48 [ 15.435047] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 15.435050] i915 0000:00:02.0: registered panic notifier [ 15.509302] cfg80211: Calling CRDA to update world regulatory domain [ 15.896859] media: Linux media interface: v0.10 [ 15.914011] Support for cores revisions 0x17 and 0x18 disabled by module param allhwsupport=0. Try b43.allhwsupport=1 [ 15.914023] b43: probe of bcma0:1 failed with error -524 [ 15.914058] Broadcom 43xx driver loaded [ Features: PMNLS ] [ 15.928864] Linux video capture interface: v2.00 [ 16.114861] cfg80211: World regulatory domain updated: [ 16.114871] cfg80211: DFS Master region: unset [ 16.114875] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 16.114882] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 16.114887] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 16.114891] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 16.114897] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 16.114903] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 16.114908] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 16.114913] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 16.114918] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 16.128881] uvcvideo: Found UVC 1.00 device HD Webcam (1bcf:2c18) [ 16.137647] input: HD Webcam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input20 [ 16.137817] usbcore: registered new interface driver uvcvideo [ 16.137821] USB Video Class driver (1.1.1) [ 16.228827] brcmsmac bcma0:1: mfg 4bf core 812 rev 24 class 0 irq 19 [ 16.243740] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 17.467895] BTRFS info (device sda4): disk space caching is enabled [ 20.576087] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 20.624774] r8169 0000:04:00.2: firmware: direct-loading firmware rtl_nic/rtl8411-1.fw [ 20.709593] r8169 0000:04:00.2 eth0: link down [ 20.709616] r8169 0000:04:00.2 eth0: link down [ 20.709655] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 20.713099] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 20.747164] brcmsmac bcma0:1: firmware: direct-loading firmware brcm/bcm43xx-0.fw [ 20.747224] brcmsmac bcma0:1: firmware: direct-loading firmware brcm/bcm43xx_hdr-0.fw [ 20.975527] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement) [ 20.975544] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement) [ 20.976220] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 21.422159] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 22.277038] r8169 0000:04:00.2 eth0: link up [ 22.277054] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Thx al ot bro ! Link to comment Share on other sites More sharing options...
0 aryvandaar Posted June 17, 2015 Report Share Posted June 17, 2015 So to get things straight, you installed funtoo and rebooted, but after you reboot you couldn't find any network interfaces? Link to comment Share on other sites More sharing options...
0 overkill Posted June 18, 2015 Report Share Posted June 18, 2015 What is the output of # ifconfig -a ? Link to comment Share on other sites More sharing options...
Question
linuxbigot
need asap help or sadly will quit...
tryin to install networkmanager and wicd = NO eth0 / no wifi working...useless system w/o inet
I have in my hand systemrescue,no way to reinstall,if it is possible to fix this mess...
tia!
Link to comment
Share on other sites
5 answers to this question
Recommended Posts