# lspci -k
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
Subsystem: Acer Incorporated [ALI] 2nd Generation Core Processor Family DRAM Controller
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
Subsystem: Acer Incorporated [ALI] 2nd Generation Core Processor Family Integrated Graphics Controller
Kernel driver in use: i915
Kernel modules: i915
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
Subsystem: Acer Incorporated [ALI] 7 Series/C210 Series Chipset Family MEI Controller
Kernel driver in use: mei_me
Kernel modules: mei_me
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
Subsystem: Acer Incorporated [ALI] 7 Series/C210 Series Chipset Family USB Enhanced Host Controller
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
Subsystem: Acer Incorporated [ALI] 7 Series/C210 Series Chipset Family High Definition Audio Controller
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.2 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 (rev c4)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.7 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 8 (rev c4)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
Subsystem: Acer Incorporated [ALI] 7 Series/C210 Series Chipset Family USB Enhanced Host Controller
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1f.0 ISA bridge: Intel Corporation HM77 Express Chipset LPC Controller (rev 04)
Subsystem: Acer Incorporated [ALI] HM77 Express Chipset LPC Controller
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
Subsystem: Acer Incorporated [ALI] 7 Series Chipset Family 6-port SATA Controller [AHCI mode]
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
Subsystem: Acer Incorporated [ALI] 7 Series/C210 Series Chipset Family SMBus Controller
Kernel modules: i2c_i801
04:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5289 (rev 01)
Subsystem: Acer Incorporated [ALI] Device 0719
Kernel driver in use: rtsx_pci
Kernel modules: rtsx_pci
04:00.2 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 0a)
Subsystem: Acer Incorporated [ALI] RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
Kernel driver in use: r8169
Kernel modules: r8169
09:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01)
Subsystem: Foxconn International, Inc. BCM4313 802.11bgn Wireless Network Adapter
Kernel driver in use: bcma-pci-bridge
Kernel modules: bcma
dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.19.3-1~exp1 (root@sysresccd) (gcc version 4.9.2 (Funtoo 4.9.2-r1) ) #1 SMP Fri Jun 5 18:19:20 2015
[ 0.000000] Command line: BOOT_IMAGE=/boot/kernel-debian-sources-x86_64-3.19.3-1~exp1 root=/dev/sda4
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x0000000075abefff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000075abf000-0x0000000075ebefff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000075ebf000-0x0000000075fbefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000075fbf000-0x0000000075ffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x0000000075fff000-0x0000000075ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000076000000-0x000000007e9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001005fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Acer Aspire E1-431/EA40_HC, BIOS V1.17 04/25/2012
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x100600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E7FFF write-protect
[ 0.000000] E8000-EFFFF write-combining
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 076000000 mask FFE000000 uncachable
[ 0.000000] 2 base 078000000 mask FF8000000 uncachable
[ 0.000000] 3 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 4 base 100000000 mask FFF800000 write-back
[ 0.000000] 5 base 100600000 mask FFFE00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ 0.000000] e820: last_pfn = 0x76000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] reserving inaccessible SNB gfx pages
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b31000, 0x01b31fff] PGTABLE
[ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
[ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x100400000-0x1005fffff]
[ 0.000000] [mem 0x100400000-0x1005fffff] page 2M
[ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1003fffff]
[ 0.000000] [mem 0x100000000-0x1003fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x60000000-0x75abefff]
[ 0.000000] [mem 0x60000000-0x759fffff] page 2M
[ 0.000000] [mem 0x75a00000-0x75abefff] page 4k
[ 0.000000] BRK [0x01b35000, 0x01b35fff] PGTABLE
[ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x75fff000-0x75ffffff]
[ 0.000000] [mem 0x75fff000-0x75ffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x40200000-0x5fffffff]
[ 0.000000] [mem 0x40200000-0x5fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff]
[ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
[ 0.000000] RAMDISK: [mem 0x371b0000-0x378cffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 ACRSYS)
[ 0.000000] ACPI: XSDT 0x0000000075FFE210 00009C (v01 ACRSYS ACRPRDCT 00000001 01000013)
[ 0.000000] ACPI: FACP 0x0000000075FFB000 00010C (v05 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: DSDT 0x0000000075FED000 00ADB8 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
[ 0.000000] ACPI: FACS 0x0000000075FBB000 000040
[ 0.000000] ACPI: UEFI 0x0000000075FFD000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: ASF! 0x0000000075FFC000 0000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: HPET 0x0000000075FFA000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: APIC 0x0000000075FF9000 00008C (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: MCFG 0x0000000075FF8000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: SLIC 0x0000000075FEC000 000176 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: WDAT 0x0000000075FEB000 000224 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: SSDT 0x0000000075FE9000 001068 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[ 0.000000] ACPI: BOOT 0x0000000075FE7000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: ASPT 0x0000000075FE2000 000034 (v07 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: MSDM 0x0000000075FE1000 000055 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: FPDT 0x0000000075FDF000 000044 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: SSDT 0x0000000075FDE000 00081E (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[ 0.000000] ACPI: SSDT 0x0000000075FDD000 000A92 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000001005fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x1005fb000-0x1005fefff]
[ 0.000000] [ffffea0000000000-ffffea00041fffff] PMD -> [ffff880073600000-ffff8800755fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x1005fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x3fffffff]
[ 0.000000] node 0: [mem 0x40200000-0x75abefff]
[ 0.000000] node 0: [mem 0x75fff000-0x75ffffff]
[ 0.000000] node 0: [mem 0x100000000-0x1005fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00001000-0x1005fffff]
[ 0.000000] On node 0 totalpages: 482396
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 156 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7451 pages used for memmap
[ 0.000000] DMA32 zone: 476864 pages, LIFO batch:31
[ 0.000000] Normal zone: 24 pages used for memmap
[ 0.000000] Normal zone: 1536 pages, LIFO batch:0
[ 0.000000] Reserving Intel graphics stolen memory at 0x76a00000-0x7e9fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 6 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x75abf000-0x75ebefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x75ebf000-0x75fbefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x75fbf000-0x75ffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x76000000-0x7e9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7ea00000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
[ 0.000000] e820: [mem 0x7ea00000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff880100200000 s87104 r8192 d31680 u262144
[ 0.000000] pcpu-alloc: s87104 r8192 d31680 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 474701
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/kernel-debian-sources-x86_64-3.19.3-1~exp1 root=/dev/sda4
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240 using standard form
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 1810096K/1929584K available (5966K kernel code, 1134K rwdata, 2016K rodata, 1268K init, 832K bss, 119488K reserved, 0K cma-reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS:33024 nr_irqs:488 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1696.118 MHz processor
[ 0.000046] Calibrating delay loop (skipped), value calculated using timer frequency.. 3392.23 BogoMIPS (lpj=6784472)
[ 0.000177] pid_max: default: 32768 minimum: 301
[ 0.000249] ACPI: Core revision 20141107
[ 0.010703] ACPI: All ACPI Tables successfully acquired
[ 0.021976] Security Framework initialized
[ 0.022047] AppArmor: AppArmor disabled by boot time parameter
[ 0.022112] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.022399] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.023099] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.023475] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.023548] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.023892] Initializing cgroup subsys memory
[ 0.023963] Initializing cgroup subsys devices
[ 0.024029] Initializing cgroup subsys freezer
[ 0.024094] Initializing cgroup subsys net_cls
[ 0.024158] Initializing cgroup subsys blkio
[ 0.024223] Initializing cgroup subsys perf_event
[ 0.024289] Initializing cgroup subsys net_prio
[ 0.024381] CPU: Physical Processor ID: 0
[ 0.024444] CPU: Processor Core ID: 0
[ 0.024510] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.024603] mce: CPU supports 7 MCE banks
[ 0.024679] CPU0: Thermal monitoring enabled (TM1)
[ 0.024754] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.024974] Freeing SMP alternatives memory: 20K (ffffffff81a5a000 - ffffffff81a5f000)
[ 0.026577] ftrace: allocating 23725 entries in 93 pages
[ 0.042068] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.081838] smpboot: CPU0: Intel(R) Celeron(R) CPU B820 @ 1.70GHz (fam: 06, model: 2a, stepping: 07)
[ 0.082547] TSC deadline timer enabled
[ 0.082578] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
[ 0.082895] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
[ 0.082979] ... version: 3
[ 0.083041] ... bit width: 48
[ 0.083103] ... generic registers: 8
[ 0.083165] ... value mask: 0000ffffffffffff
[ 0.083229] ... max period: 0000ffffffffffff
[ 0.083294] ... fixed-purpose events: 3
[ 0.083356] ... event mask: 00000007000000ff
[ 0.084243] x86: Booting SMP configuration:
[ 0.084307] .... node #0, CPUs: #1
[ 0.097501] x86: Booted up 1 node, 2 CPUs
[ 0.097621] smpboot: Total of 2 processors activated (6784.47 BogoMIPS)
[ 0.097767] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.099437] devtmpfs: initialized
[ 0.102590] PM: Registering ACPI NVS region [mem 0x75ebf000-0x75fbefff] (1048576 bytes)
[ 0.102882] pinctrl core: initialized pinctrl subsystem
[ 0.103127] NET: Registered protocol family 16
[ 0.113521] cpuidle: using governor ladder
[ 0.123249] cpuidle: using governor menu
[ 0.123418] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.123501] ACPI: bus type PCI registered
[ 0.123564] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.123747] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.123832] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.124318] PCI: Using configuration type 1 for base access
[ 0.124531] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.124597] mtrr: probably your BIOS does not setup all CPUs.
[ 0.124661] mtrr: corrected configuration.
[ 0.134154] ACPI: Added _OSI(Module Device)
[ 0.134219] ACPI: Added _OSI(Processor Device)
[ 0.134281] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.134345] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.137774] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.141169] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.142042] ACPI: Dynamic OEM Table Load:
[ 0.142198] ACPI: SSDT 0xFFFF88006F341000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20111123)
[ 0.143090] ACPI: Dynamic OEM Table Load:
[ 0.143244] ACPI: SSDT 0xFFFF88006F335800 000303 (v01 PmRef ApIst 00003000 INTL 20111123)
[ 0.144047] ACPI: Dynamic OEM Table Load:
[ 0.144198] ACPI: SSDT 0xFFFF88006F19C400 000119 (v01 PmRef ApCst 00003000 INTL 20111123)
[ 0.145319] ACPI: Interpreter enabled
[ 0.145388] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
[ 0.145558] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
[ 0.145742] ACPI: (supports S0 S3 S4 S5)
[ 0.145804] ACPI: Using IOAPIC for interrupt routing
[ 0.145904] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.152896] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.152969] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.153147] \_SB_.PCI0:_OSC invalid UUID
[ 0.153149] _OSC request data:1 1f 0
[ 0.153154] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.154172] PCI host bridge to bus 0000:00
[ 0.154237] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.154303] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.154370] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.154437] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.154505] pci_bus 0000:00: root bus resource [mem 0x7ea00000-0xfeafffff]
[ 0.154581] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[ 0.154704] pci 0000:00:02.0: [8086:0106] type 00 class 0x030000
[ 0.154718] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x903fffff 64bit]
[ 0.154726] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
[ 0.154732] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ 0.154888] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.154915] pci 0000:00:16.0: reg 0x10: [mem 0x90704000-0x9070400f 64bit]
[ 0.155005] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.155129] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.155404] pci 0000:00:1a.0: reg 0x10: [mem 0x90709000-0x907093ff]
[ 0.156905] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.156980] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.157108] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.157130] pci 0000:00:1b.0: reg 0x10: [mem 0x90700000-0x90703fff 64bit]
[ 0.157222] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.157277] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.157400] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.157503] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.157559] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.157681] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[ 0.157781] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.157837] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.157969] pci 0000:00:1c.7: [8086:1e1e] type 01 class 0x060400
[ 0.158112] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 0.158175] pci 0000:00:1c.7: System wakeup disabled by ACPI
[ 0.158299] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.158556] pci 0000:00:1d.0: reg 0x10: [mem 0x90708000-0x907083ff]
[ 0.160057] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.160127] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.160253] pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100
[ 0.160472] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.160496] pci 0000:00:1f.2: reg 0x10: [io 0x3088-0x308f]
[ 0.160506] pci 0000:00:1f.2: reg 0x14: [io 0x3094-0x3097]
[ 0.160516] pci 0000:00:1f.2: reg 0x18: [io 0x3080-0x3087]
[ 0.160526] pci 0000:00:1f.2: reg 0x1c: [io 0x3090-0x3093]
[ 0.160536] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
[ 0.160545] pci 0000:00:1f.2: reg 0x24: [mem 0x90707000-0x907077ff]
[ 0.160603] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.160705] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.160726] pci 0000:00:1f.3: reg 0x10: [mem 0x90705000-0x907050ff 64bit]
[ 0.160751] pci 0000:00:1f.3: reg 0x20: [io 0x3040-0x305f]
[ 0.160947] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.161129] pci 0000:04:00.0: [10ec:5289] type 00 class 0xff0000
[ 0.161157] pci 0000:04:00.0: reg 0x10: [mem 0x90600000-0x9060ffff]
[ 0.161352] pci 0000:04:00.0: supports D1 D2
[ 0.161354] pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.161400] pci 0000:04:00.0: System wakeup disabled by ACPI
[ 0.161538] pci 0000:04:00.2: [10ec:8168] type 00 class 0x020000
[ 0.161565] pci 0000:04:00.2: reg 0x10: [io 0x2000-0x20ff]
[ 0.161603] pci 0000:04:00.2: reg 0x18: [mem 0x90404000-0x90404fff 64bit pref]
[ 0.161627] pci 0000:04:00.2: reg 0x20: [mem 0x90400000-0x90403fff 64bit pref]
[ 0.161742] pci 0000:04:00.2: supports D1 D2
[ 0.161744] pci 0000:04:00.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.167586] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.167677] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.167692] pci 0000:00:1c.2: bridge window [mem 0x90600000-0x906fffff]
[ 0.167700] pci 0000:00:1c.2: bridge window [mem 0x90400000-0x904fffff 64bit pref]
[ 0.167867] pci 0000:09:00.0: [14e4:4727] type 00 class 0x028000
[ 0.167904] pci 0000:09:00.0: reg 0x10: [mem 0x90500000-0x90503fff 64bit]
[ 0.168111] pci 0000:09:00.0: supports D1 D2
[ 0.168113] pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
[ 0.168161] pci 0000:09:00.0: System wakeup disabled by ACPI
[ 0.175613] pci 0000:00:1c.7: PCI bridge to [bus 09]
[ 0.175710] pci 0000:00:1c.7: bridge window [mem 0x90500000-0x905fffff]
[ 0.176316] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 0.177001] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.177629] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.178255] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.178880] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.179612] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.180237] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.180864] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 0.181737] ACPI: Enabled 4 GPEs in block 00 to 3F
[ 0.181947] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.182165] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.182231] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.182314] vgaarb: loaded
[ 0.182375] vgaarb: bridge control possible 0000:00:02.0
[ 0.182569] PCI: Using ACPI for IRQ routing
[ 0.190277] PCI: pci_cache_line_size set to 64 bytes
[ 0.190374] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.190376] e820: reserve RAM buffer [mem 0x75abf000-0x77ffffff]
[ 0.190378] e820: reserve RAM buffer [mem 0x76000000-0x77ffffff]
[ 0.190380] e820: reserve RAM buffer [mem 0x100600000-0x103ffffff]
[ 0.190581] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.191023] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.193122] Switched to clocksource hpet
[ 0.202293] pnp: PnP ACPI init
[ 0.202540] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.202608] system 00:00: [io 0x1000-0x100f] has been reserved
[ 0.202675] system 00:00: [io 0xffff] has been reserved
[ 0.202740] system 00:00: [io 0xffff] has been reserved
[ 0.202806] system 00:00: [io 0x0400-0x0453] could not be reserved
[ 0.202873] system 00:00: [io 0x0458-0x047f] has been reserved
[ 0.202939] system 00:00: [io 0x0500-0x057f] has been reserved
[ 0.203006] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.203074] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.203120] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.203193] system 00:02: [io 0x0454-0x0457] has been reserved
[ 0.203261] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.203298] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.203335] pnp 00:04: Plug and Play ACPI device, IDs AUI2010 PNP0f13 (active)
[ 0.203517] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.203586] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.203654] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.203722] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.203790] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.203858] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.203925] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.203994] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.204063] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.204131] system 00:05: [mem 0x7ea00000-0x7ea00fff] has been reserved
[ 0.204199] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.204506] system 00:06: [mem 0x20000000-0x201fffff] has been reserved
[ 0.204575] system 00:06: [mem 0x40000000-0x401fffff] has been reserved
[ 0.204643] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.204691] pnp: PnP ACPI: found 7 devices
[ 0.212072] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.212151] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.212218] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.212288] pci 0000:00:1c.2: bridge window [mem 0x90600000-0x906fffff]
[ 0.212359] pci 0000:00:1c.2: bridge window [mem 0x90400000-0x904fffff 64bit pref]
[ 0.212446] pci 0000:00:1c.7: PCI bridge to [bus 09]
[ 0.212516] pci 0000:00:1c.7: bridge window [mem 0x90500000-0x905fffff]
[ 0.212595] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.212598] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.212600] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.212602] pci_bus 0000:00: resource 7 [mem 0x7ea00000-0xfeafffff]
[ 0.212605] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
[ 0.212607] pci_bus 0000:04: resource 1 [mem 0x90600000-0x906fffff]
[ 0.212610] pci_bus 0000:04: resource 2 [mem 0x90400000-0x904fffff 64bit pref]
[ 0.212612] pci_bus 0000:09: resource 1 [mem 0x90500000-0x905fffff]
[ 0.212669] NET: Registered protocol family 2
[ 0.212977] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.213115] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.213242] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.213331] TCP: reno registered
[ 0.213397] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.213474] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.213607] NET: Registered protocol family 1
[ 0.213686] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.245386] PCI: CLS 64 bytes, default 64
[ 0.245450] Unpacking initramfs...
[ 1.397929] Freeing initrd memory: 7296K (ffff8800371b0000 - ffff8800378d0000)
[ 1.398033] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.398102] software IO TLB [mem 0x6f600000-0x73600000] (64MB) mapped at [ffff88006f600000-ffff8800735fffff]
[ 1.398213] Simple Boot Flag at 0x44 set to 0x1
[ 1.398428] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[ 1.398581] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x26
[ 1.398655] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x26
[ 1.398797] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.399356] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 1.399485] audit: initializing netlink subsys (disabled)
[ 1.399570] audit: type=2000 audit(1433761292.384:1): initialized
[ 1.400058] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.400155] zpool: loaded
[ 1.400400] VFS: Disk quotas dquot_6.5.2
[ 1.400486] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.400614] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[ 1.401413] alg: No test for stdrng (krng)
[ 1.401510] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.401630] io scheduler noop registered
[ 1.401703] io scheduler deadline registered
[ 1.401774] io scheduler cfq registered (default)
[ 1.402350] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.402436] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.402526] intel_idle: MWAIT substates: 0x120
[ 1.402528] intel_idle: v0.4 model 0x2A
[ 1.402529] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.402661] GHES: HEST is not enabled!
[ 1.402820] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.403453] Linux agpgart interface v0.103
[ 1.403591] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[ 1.403658] AMD IOMMUv2 functionality not available on this system
[ 1.403805] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.405606] i8042: Detected active multiplexing controller, rev 1.1
[ 1.406354] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.406422] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.406520] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.406612] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.406704] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.406948] mousedev: PS/2 mouse device common for all mice
[ 1.407069] rtc_cmos 00:01: RTC can wake from S4
[ 1.407297] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 1.407392] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.407486] Intel P-state driver initializing.
[ 1.407805] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.408649] TCP: cubic registered
[ 1.408842] NET: Registered protocol family 10
[ 1.409406] mip6: Mobile IPv6
[ 1.409492] NET: Registered protocol family 17
[ 1.409585] mpls_gso: MPLS GSO support
[ 1.410494] registered taskstats version 1
[ 1.411552] rtc_cmos 00:01: setting system clock to 2015-06-08 11:01:32 UTC (1433761292)
[ 1.411897] PM: Hibernation image not present or could not be loaded.
[ 1.412629] Freeing unused kernel memory: 1268K (ffffffff8191d000 - ffffffff81a5a000)
[ 1.412743] Write protecting the kernel read-only data: 8192k
[ 1.413260] Freeing unused kernel memory: 164K (ffff8800015d7000 - ffff880001600000)
[ 1.413474] Freeing unused kernel memory: 32K (ffff8800017f8000 - ffff880001800000)
[ 1.424302] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.569549] SCSI subsystem initialized
[ 1.572548] libata version 3.00 loaded.
[ 1.843181] ahci 0000:00:1f.2: version 3.0
[ 1.857942] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x21 impl SATA mode
[ 1.857947] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 1.866751] scsi host0: ahci
[ 1.866978] scsi host1: ahci
[ 1.867157] scsi host2: ahci
[ 1.867344] scsi host3: ahci
[ 1.867461] scsi host4: ahci
[ 1.867581] scsi host5: ahci
[ 1.867645] ata1: SATA max UDMA/133 abar m2048@0x90707000 port 0x90707100 irq 24
[ 1.867647] ata2: DUMMY
[ 1.867648] ata3: DUMMY
[ 1.867649] ata4: DUMMY
[ 1.867650] ata5: DUMMY
[ 1.867654] ata6: SATA max UDMA/133 abar m2048@0x90707000 port 0x90707380 irq 24
[ 2.186098] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.186130] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.187708] ata6.00: ATAPI: MATSHITADVD-RAM UJ8C0, 1.00, max UDMA/133
[ 2.189098] ata6.00: configured for UDMA/133
[ 2.239783] ata1.00: ATA-8: TOSHIBA MK3259GSXP, GN003J, max UDMA/100
[ 2.239797] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.240690] ata1.00: configured for UDMA/100
[ 2.240965] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK3259GS 3J PQ: 0 ANSI: 5
[ 2.243018] scsi 5:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8C0 1.00 PQ: 0 ANSI: 5
[ 2.398191] tsc: Refined TSC clocksource calibration: 1696.146 MHz
[ 2.432171] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 2.432176] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2.432270] sd 0:0:0:0: [sda] Write Protect is off
[ 2.432275] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.432313] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.554024] sda: sda1 sda2 sda3 sda4 sda5
[ 2.555326] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.602610] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.602683] scsi 5:0:0:0: Attached scsi generic sg1 type 5
[ 2.661694] sr 5:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.661702] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.661959] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 2.888909] scsi: <fdomain> Detection failed (no card)
[ 2.992247] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[ 3.351690] Fusion MPT base driver 3.04.20
[ 3.351694] Copyright (c) 1999-2008 LSI Corporation
[ 3.398702] Switched to clocksource tsc
[ 3.418730] Fusion MPT SPI Host driver 3.04.20
[ 3.465021] Fusion MPT FC Host driver 3.04.20
[ 3.512445] Fusion MPT SAS Host driver 3.04.20
[ 3.545577] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
[ 3.578657] 3ware Storage Controller device driver for Linux v1.26.02.003.
[ 3.612017] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[ 3.648429] HP CISS Driver (v 3.6.26)
[ 3.785888] Adaptec aacraid driver 1.2-0[30300]-ms
[ 3.867858] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[ 3.869600] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[ 3.941751] megasas: 06.805.06.01-rc1
[ 3.982272] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.16-k.
[ 4.023693] Emulex LightPulse Fibre Channel SCSI driver 10.4.8000.0.
[ 4.023697] Copyright(c) 2004-2014 Emulex. All rights reserved.
[ 4.116201] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[ 4.169533] mpt2sas version 18.100.00.00 loaded
[ 5.533817] ACPI: bus type USB registered
[ 5.533849] usbcore: registered new interface driver usbfs
[ 5.533861] usbcore: registered new interface driver hub
[ 5.533891] usbcore: registered new device driver usb
[ 5.536495] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.589440] hidraw: raw HID events driver (C) Jiri Kosina
[ 5.642598] usbcore: registered new interface driver usb-storage
[ 5.694166] uhci_hcd: USB Universal Host Controller Interface driver
[ 5.746393] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 5.853221] usbcore: registered new interface driver usbhid
[ 5.853225] usbhid: USB HID core driver
[ 7.009406] device-mapper: uevent: version 1.0.3
[ 7.009486] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com
[ 7.484331] async_tx: api initialized (async)
[ 7.522108] xor: measuring software checksum speed
[ 7.560519] prefetch64-sse: 9538.000 MB/sec
[ 7.600537] generic_sse: 8751.000 MB/sec
[ 7.600539] xor: using function: prefetch64-sse (9538.000 MB/sec)
[ 7.680584] raid6: sse2x1 4579 MB/s
[ 7.748612] raid6: sse2x2 5677 MB/s
[ 7.816641] raid6: sse2x4 6583 MB/s
[ 7.816643] raid6: using algorithm sse2x4 (6583 MB/s)
[ 7.816644] raid6: using ssse3x2 recovery algorithm
[ 7.843459] md: raid6 personality registered for level 6
[ 7.843463] md: raid5 personality registered for level 5
[ 7.843465] md: raid4 personality registered for level 4
[ 7.859139] md: raid1 personality registered for level 1
[ 7.873000] md: raid10 personality registered for level 10
[ 7.880332] device-mapper: raid: Loading target version 1.6.0
[ 8.009961] md: raid0 personality registered for level 0
[ 8.286401] md: linear personality registered for level -1
[ 8.354350] md: multipath personality registered for level -4
[ 8.554127] Btrfs loaded
[ 8.689729] JFS: nTxBlock = 8192, nTxLock = 65536
[ 8.801190] RPC: Registered named UNIX socket transport module.
[ 8.801194] RPC: Registered udp transport module.
[ 8.801196] RPC: Registered tcp transport module.
[ 8.801197] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 8.818250] FS-Cache: Loaded
[ 8.824254] FS-Cache: Netfs 'nfs' registered for caching
[ 8.898153] fuse init (API version 7.23)
[ 8.979382] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 8.979387] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 9.072609] pps_core: LinuxPPS API ver. 1 registered
[ 9.072613] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 9.074255] PTP clock support registered
[ 9.175485] Loading iSCSI transport class v2.0-870.
[ 9.345412] iscsi: registered transport (tcp)
[ 10.348656] BTRFS: device fsid 24336066-374d-41de-b3a5-72cecc4ea72a devid 1 transid 2836 /dev/sda4
[ 10.349242] BTRFS info (device sda4): disk space caching is enabled
[ 10.349248] BTRFS: has skinny extents
[ 12.620561] random: nonblocking pool is initialized
[ 12.763931] udevd[18025]: starting version 1.5.3
[ 13.471042] ehci-pci: EHCI PCI platform driver
[ 13.471401] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 13.471416] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 13.471443] ehci-pci 0000:00:1a.0: debug port 2
[ 13.475378] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 13.475409] ehci-pci 0000:00:1a.0: irq 16, io mem 0x90709000
[ 13.487281] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 13.487386] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 13.487391] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 13.487394] usb usb1: Product: EHCI Host Controller
[ 13.487397] usb usb1: Manufacturer: Linux 3.19.3-1~exp1 ehci_hcd
[ 13.487401] usb usb1: SerialNumber: 0000:00:1a.0
[ 13.487677] hub 1-0:1.0: USB hub found
[ 13.487689] hub 1-0:1.0: 2 ports detected
[ 13.488077] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 13.488088] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 13.488111] ehci-pci 0000:00:1d.0: debug port 2
[ 13.492018] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 13.492043] ehci-pci 0000:00:1d.0: irq 23, io mem 0x90708000
[ 13.503288] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 13.503387] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 13.503390] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 13.503394] usb usb2: Product: EHCI Host Controller
[ 13.503397] usb usb2: Manufacturer: Linux 3.19.3-1~exp1 ehci_hcd
[ 13.503400] usb usb2: SerialNumber: 0000:00:1d.0
[ 13.507414] hub 2-0:1.0: USB hub found
[ 13.507429] hub 2-0:1.0: 2 ports detected
[ 13.547605] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 13.598193] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20141107/utaddress-258)
[ 13.598202] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 13.598207] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20141107/utaddress-258)
[ 13.598211] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 13.598213] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20141107/utaddress-258)
[ 13.598217] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 13.598218] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20141107/utaddress-258)
[ 13.598222] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 13.598224] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 13.642585] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
[ 13.642593] ACPI: Power Button [PWRB]
[ 13.642660] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6
[ 13.642663] ACPI: Sleep Button [SLPB]
[ 13.642724] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input7
[ 13.642763] ACPI: Lid Switch [LID]
[ 13.642823] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
[ 13.642826] ACPI: Power Button [PWRF]
[ 13.708241] ACPI: AC Adapter [ACAD] (on-line)
[ 13.799447] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 13.819467] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 13.830989] ACPI: Battery Slot [BAT1] (battery present)
[ 13.855164] thermal LNXTHERM:00: registered as thermal_zone0
[ 13.855169] ACPI: Thermal Zone [THRM] (40 C)
[ 13.878851] wmi: Mapper loaded
[ 13.931838] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 13.931847] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 13.932286] hub 1-1:1.0: USB hub found
[ 13.932438] hub 1-1:1.0: 6 ports detected
[ 13.951822] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 13.951832] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 13.952272] hub 2-1:1.0: USB hub found
[ 13.952435] hub 2-1:1.0: 8 ports detected
[ 13.990287] rtsx_pci 0000:04:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 26
[ 14.000279] ACPI Warning: SystemIO range 0x0000000000003040-0x000000000000305f conflicts with OpRegion 0x0000000000003040-0x000000000000304f (\_SB_.PCI0.SBUS.SMBI) (20141107/utaddress-258)
[ 14.000296] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 14.005312] bcma: bus0: Found chip with id 0x4313, rev 0x01 and package 0x08
[ 14.005354] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x24, class 0x0)
[ 14.005385] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x18, class 0x0)
[ 14.005443] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x11, class 0x0)
[ 14.018694] bcma: bus0: Bus registered
[ 14.137318] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 14.137342] r8169 0000:04:00.2: can't disable ASPM; OS doesn't have ASPM control
[ 14.138427] r8169 0000:04:00.2 eth0: RTL8411 at 0xffffc90000352000, 04:7d:7b:cf:41:c8, XID 08800800 IRQ 27
[ 14.138434] r8169 0000:04:00.2 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 14.171966] [drm] Initialized drm 1.1.0 20060810
[ 14.203667] usb 1-1.1: new high-speed USB device number 3 using ehci-pci
[ 14.261073] iTCO_vendor_support: vendor-support=0
[ 14.353008] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 14.353057] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[ 14.353192] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 14.362877] usb 1-1.1: New USB device found, idVendor=1bcf, idProduct=2c18
[ 14.362888] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 14.362893] usb 1-1.1: Product: HD Webcam
[ 14.362898] usb 1-1.1: Manufacturer: NC.21411.00221908ACDLM0007
[ 14.366413] [drm] Memory usable by graphics device = 2048M
[ 14.366421] [drm] Replacing VGA console driver
[ 14.366938] Console: switching to colour dummy device 80x25
[ 14.369138] alg: No test for crc32 (crc32-pclmul)
[ 14.385154] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 14.385163] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 14.385168] sound hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 14.385171] sound hdaudioC0D0: mono: mono_out=0x0
[ 14.385175] sound hdaudioC0D0: inputs:
[ 14.385180] sound hdaudioC0D0: Internal Mic=0x19
[ 14.385184] sound hdaudioC0D0: Mic=0x18
[ 14.391790] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 14.391795] [drm] Driver supports precise vblank timestamp query.
[ 14.391919] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 14.414444] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 14.414609] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
[ 14.414658] [drm] Initialized i915 1.6.0 20141121 for 0000:00:02.0 on minor 0
[ 14.429494] fbcon: inteldrmfb (fb0) is primary device
[ 14.453914] input: PC Speaker as /devices/platform/pcspkr/input/input11
[ 14.467327] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input9
[ 14.467639] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 14.468347] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 14.468430] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 15.379690] input: ALPS PS/2 Device as /devices/platform/i8042/serio2/input/input17
[ 15.392650] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio2/input/input15
[ 15.428778] Console: switching to colour frame buffer device 170x48
[ 15.435047] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 15.435050] i915 0000:00:02.0: registered panic notifier
[ 15.509302] cfg80211: Calling CRDA to update world regulatory domain
[ 15.896859] media: Linux media interface: v0.10
[ 15.914011] Support for cores revisions 0x17 and 0x18 disabled by module param allhwsupport=0. Try b43.allhwsupport=1
[ 15.914023] b43: probe of bcma0:1 failed with error -524
[ 15.914058] Broadcom 43xx driver loaded [ Features: PMNLS ]
[ 15.928864] Linux video capture interface: v2.00
[ 16.114861] cfg80211: World regulatory domain updated:
[ 16.114871] cfg80211: DFS Master region: unset
[ 16.114875] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 16.114882] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 16.114887] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 16.114891] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 16.114897] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 16.114903] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 16.114908] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 16.114913] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 16.114918] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 16.128881] uvcvideo: Found UVC 1.00 device HD Webcam (1bcf:2c18)
[ 16.137647] input: HD Webcam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input20
[ 16.137817] usbcore: registered new interface driver uvcvideo
[ 16.137821] USB Video Class driver (1.1.1)
[ 16.228827] brcmsmac bcma0:1: mfg 4bf core 812 rev 24 class 0 irq 19
[ 16.243740] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 17.467895] BTRFS info (device sda4): disk space caching is enabled
[ 20.576087] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 20.624774] r8169 0000:04:00.2: firmware: direct-loading firmware rtl_nic/rtl8411-1.fw
[ 20.709593] r8169 0000:04:00.2 eth0: link down
[ 20.709616] r8169 0000:04:00.2 eth0: link down
[ 20.709655] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 20.713099] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 20.747164] brcmsmac bcma0:1: firmware: direct-loading firmware brcm/bcm43xx-0.fw
[ 20.747224] brcmsmac bcma0:1: firmware: direct-loading firmware brcm/bcm43xx_hdr-0.fw
[ 20.975527] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 20.975544] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[ 20.976220] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 21.422159] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 22.277038] r8169 0000:04:00.2 eth0: link up
[ 22.277054] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Thx al ot bro !
