Jump to content
funtoo forums
  • 0
Sign in to follow this  
adcdam

problem compiling conky

Question

Hi i can t compile conky, any advice?

>>> Emerging (1 of 1) app-admin/conky-1.10.0::gentoo
 * conky-1.10.0.tar.gz SHA256 SHA512 WHIRLPOOL size ;-) ...                  [ ok ]
 * Determining the location of the kernel source code
 * Found kernel source directory:
 *     /usr/src/linux
 * Found kernel object directory:
 *     /lib/modules/3.19.3-1~exp1/build
 * Found sources for kernel version:
 *     3.19.3-1~exp1
 * Unable to check for the following kernel config options due
 * to absence of any configured kernel sources or compiled
 * config:
 *  - IPV6
 * You're on your own to make sure they are set if needed.
>>> Unpacking source...
>>> Unpacking conky-1.10.0.tar.gz to /var/tmp/portage/app-admin/conky-1.10.0/work
>>> Source unpacked in /var/tmp/portage/app-admin/conky-1.10.0/work
>>> Preparing source in /var/tmp/portage/app-admin/conky-1.10.0/work/conky-1.10.0 ...
 * Applying conky-1.10.0-cmake.patch ...                                     [ ok ]
>>> Source prepared.
>>> Configuring source in /var/tmp/portage/app-admin/conky-1.10.0/work/conky-1.10.0 ...
>>> Working in BUILD_DIR: "/var/tmp/portage/app-admin/conky-1.10.0/work/conky-1.10.0_build"
 * Declaring mycmakeargs as a variable is deprecated. Please use an array instead.
cmake --no-warn-unused-cli -C /var/tmp/portage/app-admin/conky-1.10.0/work/conky-1.10.0_build/gentoo_common_config.cmake -G Unix Makefiles -DCMAKE_INSTALL_PREFIX=/usr -DBUILD_X11=ON -DOWN_WINDOW=ON -DBUILD_XDAMAGE=ON -DBUILD_XDBE=ON -DBUILD_XFT=ON -DBUILD_IMLIB2=OFF -DBUILD_XSHAPE=ON -DBUILD_ARGB=ON -DBUILD_LUA_CAIRO=OFF -DBUILD_LUA_IMLIB2=OFF -DBUILD_LUA_RSVG=OFF -DBUILD_nvidia=OFF -DBUILD_NVIDIA=OFF -DBUILD_Nvidia=OFF -DBUILD_audacious=OFF -DBUILD_AUDACIOUS=OFF -DBUILD_Audacious=OFF -DBUILD_xmms2=OFF -DBUILD_XMMS2=OFF -DBUILD_Xmms2=OFF -DBUILD_apcupsd=OFF -DBUILD_APCUPSD=OFF -DBUILD_Apcupsd=OFF -DBUILD_debug=OFF -DBUILD_DEBUG=OFF -DBUILD_Debug=OFF -DBUILD_cmus=OFF -DBUILD_CMUS=OFF -DBUILD_Cmus=OFF -DBUILD_curl=OFF -DBUILD_CURL=OFF -DBUILD_Curl=OFF -DBUILD_eve=OFF -DBUILD_EVE=OFF -DBUILD_Eve=OFF -DBUILD_hddtemp=OFF -DBUILD_HDDTEMP=OFF -DBUILD_Hddtemp=OFF -DBUILD_iostats=OFF -DBUILD_IOSTATS=OFF -DBUILD_Iostats=OFF -DBUILD_ical=OFF -DBUILD_ICAL=OFF -DBUILD_Ical=OFF -DBUILD_iconv=ON -DBUILD_ICONV=ON -DBUILD_Iconv=ON -DBUILD_ipv6=ON -DBUILD_IPV6=ON -DBUILD_Ipv6=ON -DBUILD_irc=OFF -DBUILD_IRC=OFF -DBUILD_Irc=OFF -DBUILD_math=OFF -DBUILD_MATH=OFF -DBUILD_Math=OFF -DBUILD_moc=OFF -DBUILD_MOC=OFF -DBUILD_Moc=OFF -DBUILD_mpd=OFF -DBUILD_MPD=OFF -DBUILD_Mpd=OFF -DBUILD_mysql=OFF -DBUILD_MYSQL=OFF -DBUILD_Mysql=OFF -DBUILD_ncurses=ON -DBUILD_NCURSES=ON -DBUILD_Ncurses=ON -DBUILD_PORT_MONITORS=ON -DBUILD_rss=OFF -DBUILD_RSS=OFF -DBUILD_Rss=OFF -DBUILD_IBM=OFF -DBUILD_WEATHER_METAR=OFF -DBUILD_WEATHER_XOAP=OFF -DBUILD_HTTP=OFF -DBUILD_WLAN=OFF -DBUILD_BUILTIN_CONFIG=ON -DBUILD_OLD_CONFIG=ON -DBUILD_I18N=ON -DMAINTAINER_MODE=ON -DBUILD_AUDACIOUS_LEGACY=OFF -DBUILD_BMPX=OFF -DDOC_PATH=/usr/share/doc/conky-1.10.0 -DCMAKE_BUILD_TYPE=Gentoo -DCMAKE_INSTALL_DO_STRIP=OFF -DCMAKE_USER_MAKE_RULES_OVERRIDE=/var/tmp/portage/app-admin/conky-1.10.0/work/conky-1.10.0_build/gentoo_rules.cmake -DCMAKE_TOOLCHAIN_FILE=/var/tmp/portage/app-admin/conky-1.10.0/work/conky-1.10.0_build/gentoo_toolchain.cmake  /var/tmp/portage/app-admin/conky-1.10.0/work/conky-1.10.0
Not searching for unused variables given on the command line.
loading initial cache file /var/tmp/portage/app-admin/conky-1.10.0/work/conky-1.10.0_build/gentoo_common_config.cmake
-- The C compiler identification is GNU 4.9.3
-- The CXX compiler identification is GNU 4.9.3
-- Check for working C compiler: /usr/bin/x86_64-pc-linux-gnu-gcc
-- Check for working C compiler: /usr/bin/x86_64-pc-linux-gnu-gcc -- works
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Detecting C compile features
-- Detecting C compile features - done
-- Check for working CXX compiler: /usr/bin/x86_64-pc-linux-gnu-g++
-- Check for working CXX compiler: /usr/bin/x86_64-pc-linux-gnu-g++ -- works
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Detecting CXX compile features
-- Detecting CXX compile features - done
-- Looking for pthread.h
-- Looking for pthread.h - found
-- Looking for pthread_create
-- Looking for pthread_create - not found
-- Looking for pthread_create in pthreads
-- Looking for pthread_create in pthreads - not found
-- Looking for pthread_create in pthread
-- Looking for pthread_create in pthread - found
-- Found Threads: TRUE  
-- Found PkgConfig: /usr/bin/x86_64-pc-linux-gnu-pkg-config (found version "0.28")
CMake Error at cmake/ConkyPlatformChecks.cmake:29 (check_include_files):
  Unknown CMake command "check_include_files".
Call Stack (most recent call first):
  CMakeLists.txt:37 (include)


-- Configuring incomplete, errors occurred!
See also "/var/tmp/portage/app-admin/conky-1.10.0/work/conky-1.10.0_build/CMakeFiles/CMakeOutput.log".
See also "/var/tmp/portage/app-admin/conky-1.10.0/work/conky-1.10.0_build/CMakeFiles/CMakeError.log".
 * ERROR: app-admin/conky-1.10.0::gentoo failed (configure phase):
 *   cmake failed
 *
 * Call stack:
 *     ebuild.sh, line   93:  Called src_configure
 *   environment, line 4288:  Called cmake-utils_src_configure
 *   environment, line 1316:  Called _execute_optionally 'src_configure'
 *   environment, line  562:  Called enable_cmake-utils_src_configure
 *   environment, line 2087:  Called die
 * The specific snippet of code:
 *       "${CMAKE_BINARY}" "${cmakeargs[@]}" "${CMAKE_USE_DIR}" || die "cmake failed";
 *
 * If you need support, post the output of `emerge --info '=app-admin/conky-1.10.0::gentoo'`,
 * the complete build log and the output of `emerge -pqv '=app-admin/conky-1.10.0::gentoo'`.
 * The complete build log is located at '/var/tmp/portage/app-admin/conky-1.10.0/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/app-admin/conky-1.10.0/temp/environment'.
 * Working directory: '/var/tmp/portage/app-admin/conky-1.10.0/work/conky-1.10.0_build'
 * S: '/var/tmp/portage/app-admin/conky-1.10.0/work/conky-1.10.0'

>>> Failed to emerge app-admin/conky-1.10.0, Log file:

>>>  '/var/tmp/portage/app-admin/conky-1.10.0/temp/build.log'

 * Messages for package app-admin/conky-1.10.0:

 * Unable to check for the following kernel config options due
 * to absence of any configured kernel sources or compiled
 * config:
 *  - IPV6
 * You're on your own to make sure they are set if needed.
 * ERROR: app-admin/conky-1.10.0::gentoo failed (configure phase):
 *   cmake failed
 *
 * Call stack:
 *     ebuild.sh, line   93:  Called src_configure
 *   environment, line 4288:  Called cmake-utils_src_configure
 *   environment, line 1316:  Called _execute_optionally 'src_configure'
 *   environment, line  562:  Called enable_cmake-utils_src_configure
 *   environment, line 2087:  Called die
 * The specific snippet of code:
 *       "${CMAKE_BINARY}" "${cmakeargs[@]}" "${CMAKE_USE_DIR}" || die "cmake failed";
 *
 * If you need support, post the output of `emerge --info '=app-admin/conky-1.10.0::gentoo'`,
 * the complete build log and the output of `emerge -pqv '=app-admin/conky-1.10.0::gentoo'`.
 * The complete build log is located at '/var/tmp/portage/app-admin/conky-1.10.0/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/app-admin/conky-1.10.0/temp/environment'.
 * Working directory: '/var/tmp/portage/app-admin/conky-1.10.0/work/conky-1.10.0_build'
 * S: '/var/tmp/portage/app-admin/conky-1.10.0/work/conky-1.10.0'

Share this post


Link to post
Share on other sites

2 answers to this question

Recommended Posts

  • 0

I opened in my leafpad text editor as root:

leafpad /usr/portage/app-admin/conky/files/conky-1.10.0.cmake.patch

I add this new patch below the existing patch:

--- cmake/ConkyPlatformChecks.cmake	2015-06-21 20:49:06.000000000 -0400
+++ cmake/ConkyPlatformChecks.cmake.new	2015-11-15 01:53:47.645643108 -0500
@@ -22,7 +22,7 @@
 
 include(FindPkgConfig)
 include(CheckFunctionExists)
-include(CheckIncludeFile)
+include(CheckIncludeFiles)
 include(CheckSymbolExists)

I saved conky-1.10.0.cmake.patch after it looked like this:

--- cmake/Docbook.cmake	2014-06-21 09:51:44.857916287 +0200
+++ cmake/Docbook.cmake.new	2014-06-21 09:53:37.251924303 +0200
@@ -72,7 +72,7 @@
 			COMMAND ${APP_XSLTPROC} http://docbook.sourceforge.net/release/xsl/current/html/docbook.xsl ${CMAKE_CURRENT_SOURCE_DIR}/${FIL}.xml > ${CMAKE_CURRENT_SOURCE_DIR}/${FIL}.html
 
 			COMMAND ${APP_DB2X_XSLTPROC} -s man ${CMAKE_CURRENT_SOURCE_DIR}/${FIL}.xml -o ${FIL}.mxml
-			COMMAND ${APP_DB2X_MANXML} ${FIL}.mxml --output-dir ${CMAKE_CURRENT_SOURCE_DIR}
+			COMMAND ${APP_DB2X_MANXML} ${FIL}.mxml --encoding=UTF8 --output-dir ${CMAKE_CURRENT_SOURCE_DIR}
 			COMMAND ${APP_XSLTPROC} http://docbook.sourceforge.net/release/xsl/current/html/docbook.xsl ${CMAKE_CURRENT_SOURCE_DIR}/${FIL}.xml > ${CMAKE_CURRENT_SOURCE_DIR}/${FIL}.html
 			COMMAND ${APP_MAN} -P '${APP_LESS} -is' ${CMAKE_CURRENT_SOURCE_DIR}/${PROJECT_NAME}.1 > ${CMAKE_SOURCE_DIR}/README
 			COMMAND ${APP_SED} -i "s/[[:cntrl:]]\\[[0-9]*m//g" ${CMAKE_SOURCE_DIR}/README

--- cmake/ConkyPlatformChecks.cmake	2015-06-21 20:49:06.000000000 -0400
+++ cmake/ConkyPlatformChecks.cmake.new	2015-11-15 01:53:47.645643108 -0500
@@ -22,7 +22,7 @@
 
 include(FindPkgConfig)
 include(CheckFunctionExists)
-include(CheckIncludeFile)
+include(CheckIncludeFiles)
 include(CheckSymbolExists)

I used this command prepending variable to temporarily disable features in emerge.
This is necessary to prevent a permissions error which prevents merge.
 

 FEATURES="-userpriv -usersandbox" emerge -av conky

After verifying conky would merge I configured portage to disable the features for conky using the following method:
 

mkdir /etc/portage/env
echo "FEATURES="-userpriv -usersandbox" >> /etc/portage/env/nouserpriv.conf
echo "app-admin/conky nouserpriv.conf" >> /etc/portage/package.env

I merge conky now with simple command:

emerge -av conky

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Answer this question...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...