Jump to content
Forums in Read-Only Mode - Please use Reddit ×
  • 0

Failing to install polkit

mayankjohri

Asked by mayankjohri,

 Share

Question

mayankjohri Newbie

mayankjohri

Posted
Posted

I am tring to install polkit using the following command

 

`emerge polkit`

 

I am getting the following error message:

---------------------------------------- Error Message -------------------------------------------

/usr/share/gobject-introspection-1.0/Makefile.introspection:155: recipe for target 'Polkit-1.0.gir' failed
make[4]: *** [Polkit-1.0.gir] Illegal instruction
make[4]: Leaving directory '/var/tmp/portage/sys-auth/polkit-0.113-r1/work/polkit-0.113/src/polkit'
Makefile:539: recipe for target 'all' failed
make[3]: *** [all] Error 2
make[3]: Leaving directory '/var/tmp/portage/sys-auth/polkit-0.113-r1/work/polkit-0.113/src/polkit'
Makefile:419: recipe for target 'all-recursive' failed
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory '/var/tmp/portage/sys-auth/polkit-0.113-r1/work/polkit-0.113/src'
Makefile:479: recipe for target 'all-recursive' failed
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory '/var/tmp/portage/sys-auth/polkit-0.113-r1/work/polkit-0.113'
Makefile:411: recipe for target 'all' failed
make: *** [all] Error 2
 * ERROR: sys-auth/polkit-0.113-r1::gentoo failed (compile phase):
 *   emake failed
 *
 * If you need support, post the output of `emerge --info '=sys-auth/polkit-0.113-r1::gentoo'`,
 * the complete build log and the output of `emerge -pqv '=sys-auth/polkit-0.113-r1::gentoo'`.
 * The complete build log is located at '/var/tmp/portage/sys-auth/polkit-0.113-r1/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/sys-auth/polkit-0.113-r1/temp/environment'.
 * Working directory: '/var/tmp/portage/sys-auth/polkit-0.113-r1/work/polkit-0.113'
 * S: '/var/tmp/portage/sys-auth/polkit-0.113-r1/work/polkit-0.113'

>>> Failed to emerge sys-auth/polkit-0.113-r1, Log file:

>>>  '/var/tmp/portage/sys-auth/polkit-0.113-r1/temp/build.log'

 * Messages for package sys-auth/polkit-0.113-r1:

 * ERROR: sys-auth/polkit-0.113-r1::gentoo failed (compile phase):
 *   emake failed
 *
 * If you need support, post the output of `emerge --info '=sys-auth/polkit-0.113-r1::gentoo'`,
 * the complete build log and the output of `emerge -pqv '=sys-auth/polkit-0.113-r1::gentoo'`.
 * The complete build log is located at '/var/tmp/portage/sys-auth/polkit-0.113-r1/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/sys-auth/polkit-0.113-r1/temp/environment'.
 * Working directory: '/var/tmp/portage/sys-auth/polkit-0.113-r1/work/polkit-0.113'
 * S: '/var/tmp/portage/sys-auth/polkit-0.113-r1/work/polkit-0.113'
-----------------------------------------------------------------------------------------------

(chroot) manjaro / # emerge --info '=sys-auth/polkit-0.113-r1::gentoo'
Portage 2.2.26 (python 2.7.12-final-0, funtoo/1.0/linux-gnu/arch/pure64, gcc-4.9.3, glibc-2.22, 4.4.12-1-MANJARO x86_64)
=================================================================
                         System Settings
=================================================================
System uname: Linux-4.4.12-1-MANJARO-x86_64-Intel-R-_Core-TM-_i3-4000M_CPU_@_2.40GHz-with-gentoo-2.2.1
KiB Mem:     7886792 total,   5734424 free
KiB Swap:          0 total,         0 free
sh bash 4.3_p42
ld GNU ld (Funtoo 2.25) 2.25.0
app-shells/bash:          4.3_p42::gentoo
dev-lang/perl:            5.22.2::gentoo
dev-lang/python:          2.7.12::gentoo, 3.4.5::gentoo
dev-util/cmake:           3.6.2::gentoo
sys-apps/baselayout:      2.2.1::gentoo
sys-apps/openrc:          0.18.3-r2::gentoo
sys-apps/sandbox:         2.10-r2::gentoo
sys-devel/autoconf:       2.13::gentoo, 2.69-r2::gentoo
sys-devel/automake:       1.13.4-r1::gentoo, 1.14.1-r1::gentoo, 1.15-r2::gentoo
sys-devel/binutils:       2.25-r2::gentoo
sys-devel/gcc:            4.9.3-r3::gentoo
sys-devel/gcc-config:     1.8-r1::gentoo
sys-devel/libtool:        2.4.6-r2::gentoo
sys-devel/make:           4.1-r1::gentoo
sys-kernel/linux-headers: 4.3::gentoo (virtual/os-headers)
sys-libs/glibc:           2.22::gentoo
Repositories:

gentoo
    location: /usr/portage
    sync-type: git
    sync-uri: git://github.com/funtoo/ports-2012.git
    priority: -1000

ACCEPT_KEYWORDS="amd64 ~amd64"
ACCEPT_LICENSE="* -@EULA Oracle-BCLA-JavaSE"
CBUILD="x86_64-pc-linux-gnu"
CFLAGS="-march=haswell -O2 -pipe"
CHOST="x86_64-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/share/config /usr/share/gnupg/qualified.txt"
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/dconf /etc/env.d /etc/fonts/fonts.conf /etc/gconf /etc/gentoo-release /etc/revdep-rebuild /etc/sandbox.d /etc/terminfo"
CXXFLAGS="-march=haswell -O2 -pipe"
DISTDIR="/usr/portage/distfiles"
FEATURES="assume-digests binpkg-logs config-protect-if-modified distlocks ebuild-locks fixlafiles merge-sync news parallel-fetch preserve-libs protect-owned sandbox sfperms strict unknown-features-warn unmerge-logs unmerge-orphans userfetch userpriv usersandbox usersync xattr"
FFLAGS="-march=haswell -O2 -pipe"
GENTOO_MIRRORS="http://distfiles.gentoo.org"
LANG="en_US.UTF-8"
LDFLAGS="-Wl,-O1 -Wl,--sort-common -Wl,--as-needed"
MAKEOPTS="-j4"
PKGDIR="/usr/portage/packages"
PORTAGE_CONFIGROOT="/"
PORTAGE_TMPDIR="/var/tmp"
USE="X a52 aac acl alsa amd64 apng berkdb bluray bzip2 cdda cddb cdio cdr consolekit cracklib crypt cups cxx dbus dc1394 declarative dirac dri dts dv dvd dvdr dvdread encode exif faac faad ffmpeg flac gdbm gif gpm ico iconv icu iec61883 ieee1394 ios ipod ipv6 jack jpeg jpeg2k kate kipi lame libass libguess libmpeg2 libtiger live mad matroska mjpeg mms mmx modules mp3 mpeg mtp mudflap ncurses networkmanager nls nptl nsplugin nuv ogg opengl openmp pam pcre pdf phonon plasma png policykit postproc pppd python quicktime readline resolvconf rtmp rtsp schroedinger semantic-desktop session sndfile sse sse2 ssl startup-notification svg taglib tcpd theora tiff truetype twolame udev udisks unicode upower userlocales v4l vorbis vpx wav wavpack webp win32codecs wmf x264 x265 xattr xcomposite xdg xinerama xml xscreensaver xvid zlib" ABI_X86="64" ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel ice1724 intel8x0 intel8x0m maestro3 trident usb-audio via82xx via82xx-modem ymfpci" ALSA_PCM_PLUGINS="adpcm alaw asym copy dmix dshare dsnoop empty extplug file hooks iec958 ioplug ladspa lfloat linear meter mmap_emul mulaw multi null plug rate route share shm softvol" APACHE2_MODULES="actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache cgi cgid dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias authn_core authz_core socache_shmcb unixd" CALLIGRA_FEATURES="kexi words flow plan sheets stage tables krita karbon braindump author" CAMERAS="ptp2" COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog" CPU_FLAGS_X86="aes avx fma3 mmx mmxext popcnt sse sse2 sse3 sse4_1 sse4_2 ssse3" ELIBC="glibc" GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 garmin garmintxt gpsclock itrax mtk3301 nmea ntrip navcom oceanserver oldstyle oncore rtcm104v2 rtcm104v3 sirf superstar2 timing tsip tripmate tnt ublox ubx" GRUB_PLATFORMS="efi-64 pc" INPUT_DEVICES="evdev synaptics keyboard mouse" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LIBREOFFICE_EXTENSIONS="presenter-console presenter-minimizer" OFFICE_IMPLEMENTATION="libreoffice" PHP_TARGETS="php5-6" PYTHON_SINGLE_TARGET="python3_4" PYTHON_TARGETS="python2_7 python3_4" QEMU_SOFTMMU_TARGETS="i386 x86_64" QEMU_USER_TARGETS="i386 x86_64" RUBY_TARGETS="ruby20 ruby21 ruby22" USERLAND="GNU" XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset ipp2p iface geoip fuzzy condition tee tarpit sysrq steal rawnat logmark ipmark dhcpmac delude chaos account"
Unset:  CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LC_ALL, LINGUAS, PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS
 

 

Please suggest

Link to comment
Share on other sites

4 answers to this question

Recommended Posts

  • 0
cardinal Contributor

cardinal

Posted
Posted

Polkit-0.113-r1 builds on my system.

funtoo rj # epro show

=== Enabled Profiles: ===

        arch: pure64
       build: current
     subarch: native_64-pure64
      flavor: desktop
     mix-ins: lxde


=== All inherited flavors from desktop flavor: ===

                     workstation (from desktop flavor)
                            core (from workstation flavor)
                         minimal (from core flavor)

=== All inherited mix-ins from desktop flavor: ===

                               X (from workstation flavor)
                           audio (from workstation flavor)
                             dvd (from workstation flavor)
                           media (from workstation flavor)
      mediadevice-audio-consumer (from media mix-in)
                mediadevice-base (from mediadevice-audio-consumer mix-in)
      mediadevice-video-consumer (from media mix-in)
                mediadevice-base (from mediadevice-video-consumer mix-in)
        mediaformat-audio-common (from media mix-in)
          mediaformat-gfx-common (from media mix-in)
        mediaformat-video-common (from media mix-in)
                  console-extras (from workstation flavor)
                           print (from desktop flavor)


funtoo rj # emerge --info
Portage 2.2.26 (python 3.4.5-final-0, funtoo/1.0/linux-gnu/arch/pure64, gcc-4.9.3, glibc-2.22-r2, 4.5.2-1 x86_64)
=================================================================
System uname: Linux-4.5.2-1-x86_64-Intel-R-_Core-TM-2_Duo_CPU_E4500_@_2.20GHz-with-gentoo-2.2.1
KiB Mem:     4045632 total,   1699248 free
KiB Swap:    2097148 total,   2097148 free
sh bash 4.3_p42
ld GNU ld (Funtoo 2.25) 2.25.0
app-shells/bash:          4.3_p42::gentoo
dev-lang/perl:            5.22.2::gentoo
dev-lang/python:          2.7.12::gentoo, 3.4.5::gentoo
dev-util/cmake:           3.6.2::gentoo
sys-apps/baselayout:      2.2.1::gentoo
sys-apps/openrc:          0.18.3-r2::gentoo
sys-apps/sandbox:         2.10-r2::gentoo
sys-devel/autoconf:       2.13::gentoo, 2.69-r2::gentoo
sys-devel/automake:       1.11.6-r2::gentoo, 1.13.4-r1::gentoo, 1.14.1-r1::gentoo, 1.15-r2::gentoo
sys-devel/binutils:       2.25-r2::gentoo
sys-devel/gcc:            4.9.3-r3::gentoo
sys-devel/gcc-config:     1.8-r1::gentoo
sys-devel/libtool:        2.4.6-r2::gentoo
sys-devel/make:           4.1-r1::gentoo
sys-kernel/linux-headers: 4.3::gentoo (virtual/os-headers)
sys-libs/glibc:           2.22-r2::rj
Repositories:

gentoo
    location: /usr/portage
    sync-type: git
    sync-uri: git://github.com/funtoo/ports-2012.git
    priority: -1000

rj
    location: /usr/local/portage
    masters: gentoo

ACCEPT_KEYWORDS="amd64 ~amd64"
ACCEPT_LICENSE="* -@EULA Oracle-BCLA-JavaSE"
CBUILD="x86_64-pc-linux-gnu"
CFLAGS="-march=native -O2 -pipe"
CHOST="x86_64-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/share/gnupg/qualified.txt"
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/dconf /etc/env.d /etc/fonts/fonts.conf /etc/gconf /etc/gentoo-release /etc/revdep-rebuild /etc/sandbox.d /etc/terminfo"
CXXFLAGS="-march=native -O2 -pipe"
DISTDIR="/usr/portage/distfiles"
EMERGE_DEFAULT_OPTS="--with-bdeps=y"
FEATURES="assume-digests binpkg-logs config-protect-if-modified distlocks ebuild-locks fixlafiles merge-sync news parallel-fetch preserve-libs protect-owned sandbox sfperms strict unknown-features-warn unmerge-logs unmerge-orphans userfetch userpriv usersandbox usersync xattr"
FFLAGS="-march=native -O2 -pipe"
GENTOO_MIRRORS="http://distfiles.gentoo.org"
LANG="en_US.utf8"
LDFLAGS="-Wl,-O1 -Wl,--sort-common -Wl,--as-needed"
LINGUAS="en"
MAKEOPTS="-j3"
PKGDIR="/usr/portage/packages"
PORTAGE_CONFIGROOT="/"
PORTAGE_TMPDIR="/var/tmp"
USE="X a52 aac acl alsa amd64 apng berkdb bluray bzip2 cdda cddb cdio cdr consolekit cracklib crypt cups cxx dbus dri dts dvd dvdnav dvdr dvdread encode exif faac faad ffmpeg flac gdbm gif gpm gtk ico iconv icu ieee1394 ios ipod ipv6 jpeg jpeg2k lame libass libguess libmpeg2 mad matroska mjpeg mmx modules mp3 mpeg mtp mudflap ncurses nls nptl nsplugin ogg opengl openmp pam pcre pdf png policykit postproc pppd python quicktime readline resolvconf session sndfile sse sse2 ssl startup-notification svg taglib tcpd theora tiff truetype twolame udev udisks unicode upower v4l vaapi vdpau vorbis vpx wav wavpack webp win32codecs wmf x264 x265 xattr xdg xml xvid xvmc zlib" ABI_X86="64" ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel ice1724 intel8x0 intel8x0m maestro3 trident usb-audio via82xx via82xx-modem ymfpci" ALSA_PCM_PLUGINS="adpcm alaw asym copy dmix dshare dsnoop empty extplug file hooks iec958 ioplug ladspa lfloat linear meter mmap_emul mulaw multi null plug rate route share shm softvol" APACHE2_MODULES="actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache cgi cgid dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias authn_core authz_core socache_shmcb unixd" CALLIGRA_FEATURES="kexi words flow plan sheets stage tables krita karbon braindump author" CAMERAS="ptp2" COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog" CPU_FLAGS_X86="mmx mmxext sse sse2 sse3 ssse3" ELIBC="glibc" GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 garmin garmintxt gpsclock itrax mtk3301 nmea ntrip navcom oceanserver oldstyle oncore rtcm104v2 rtcm104v3 sirf superstar2 timing tsip tripmate tnt ublox ubx" GRUB_PLATFORMS="efi-64 pc" INPUT_DEVICES="evdev synaptics keyboard mouse" KERNEL="linux" L10N="en" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LIBREOFFICE_EXTENSIONS="presenter-console presenter-minimizer" LINGUAS="en" OFFICE_IMPLEMENTATION="libreoffice" PHP_TARGETS="php5-6" PYTHON_SINGLE_TARGET="python3_4" PYTHON_TARGETS="python2_7 python3_4" QEMU_SOFTMMU_TARGETS="i386 x86_64" QEMU_USER_TARGETS="i386 x86_64" RUBY_TARGETS="ruby20 ruby21 ruby22" SANE_BACKENDS="avision" USERLAND="GNU" VIDEO_CARDS="nouveau radeon r600" XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset ipp2p iface geoip fuzzy condition tee tarpit sysrq steal rawnat logmark ipmark dhcpmac delude chaos account"
Unset:  CPPFLAGS, CTARGET, INSTALL_MASK, LC_ALL, PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS


funtoo rj # emerge -1pv polkit

These are the packages that would be merged, in order:

Calculating dependencies... done!
[ebuild   R    ] sys-auth/polkit-0.113-r1::gentoo  USE="gtk introspection nls pam -examples -jit -kde (-selinux) -systemd {-test}" 0 KiB

Total: 1 package (1 reinstall), Size of downloads: 0 KiB


funtoo rj # wgetpaste /var/log/portage/sys-auth\:polkit-0.113-r1\:20160923-164044.log 
Your paste can be seen here: https://paste.pound-python.org/show/bBeLhgSWjw7YaMytJV1T/
Link to comment
Share on other sites
  • 0
paglop Newbie

paglop

Posted
Posted

excuse no adsl. A lot of problem, I write on my old gentoo, even my keyboard let go.

I install a small mate with sawfish and compton and .... some app: aqemu gkrellm vlc wireshark tor coccinella and others ...juste for use

problem with dev-libs/gobject-introspection, it produces ./g-ir-scanner but can not use it on glib

 

Makefile:3488: recipe for target 'GLib-2.0.gir' failed
make[2]: *** [GLib-2.0.gir] Illegal instruction
make[2]: Leaving directory '/var/tmp/portage/dev-libs/gobject-introspection-1.48.0/work/gobject-introspection-1.48.0'
 

=== Enabled Profiles: ===

        arch: x86-64bit
       build: current
     subarch: intel64-westmere
      flavor: desktop
     mix-ins: mate


=== All inherited flavors from desktop flavor: ===

                     workstation (from desktop flavor)
                            core (from workstation flavor)
                         minimal (from core flavor)

=== All inherited mix-ins from desktop flavor: ===

                               X (from workstation flavor)
                           audio (from workstation flavor)
                             dvd (from workstation flavor)
                           media (from workstation flavor)
      mediadevice-audio-consumer (from media mix-in)
                mediadevice-base (from mediadevice-audio-consumer mix-in)
      mediadevice-video-consumer (from media mix-in)
                mediadevice-base (from mediadevice-video-consumer mix-in)
        mediaformat-audio-common (from media mix-in)
          mediaformat-gfx-common (from media mix-in)
        mediaformat-video-common (from media mix-in)
                  console-extras (from workstation flavor)
                           print (from desktop flavor)
 

__________________________________________________________________________________

chroot (Linux-3.17.7-gentoopag-4)

 

Portage 2.3.1 (python 2.7.12-final-0, funtoo/1.0/linux-gnu/arch/x86-64bit, gcc-4.9.3, glibc-2.22, 3.17.7-gentoopag-4 x86_64)
=================================================================
System uname: Linux-3.17.7-gentoopag-4-x86_64-Intel-R-_Core-TM-_i3_CPU_560_@_3.33GHz-with-gentoo-2.2.1
KiB Mem:     3915104 total,     55456 free
KiB Swap:    7813108 total,   7812956 free
sh bash 4.3_p42
ld GNU ld (Funtoo 2.25) 2.25.0
app-shells/bash:          4.3_p42::gentoo
dev-lang/perl:            5.22.2::gentoo
dev-lang/python:          2.7.12::gentoo, 3.4.5::gentoo
dev-util/cmake:           3.6.2::gentoo
sys-apps/baselayout:      2.2.1::gentoo
sys-apps/openrc:          0.18.3-r2::gentoo
sys-apps/sandbox:         2.10-r2::gentoo
sys-devel/autoconf:       2.13::gentoo, 2.69-r2::gentoo
sys-devel/automake:       1.13.4-r1::gentoo, 1.14.1-r1::gentoo, 1.15-r2::gentoo
sys-devel/binutils:       2.25-r2::gentoo
sys-devel/gcc:            4.9.3-r3::gentoo
sys-devel/gcc-config:     1.8-r1::gentoo
sys-devel/libtool:        2.4.6-r2::gentoo
sys-devel/make:           4.1-r1::gentoo
sys-kernel/linux-headers: 4.3::gentoo (virtual/os-headers)
sys-libs/glibc:           2.22::gentoo
Repositories:

gentoo
    location: /usr/portage
    sync-type: git
    sync-uri: git://github.com/funtoo/ports-2012.git
    priority: -1000

ACCEPT_KEYWORDS="amd64 ~amd64"
ACCEPT_LICENSE="*"
CBUILD="x86_64-pc-linux-gnu"
CFLAGS="-march=westmere -O2 -pipe"
CHOST="x86_64-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/share/gnupg/qualified.txt"
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/dconf /etc/env.d /etc/fonts/fonts.conf /etc/gconf /etc/gentoo-release /etc/revdep-rebuild /etc/sandbox.d /etc/terminfo"
CXXFLAGS="-march=westmere -O2 -pipe"
DISTDIR="/usr/portage/distfiles"
FEATURES="assume-digests binpkg-logs buildpkg config-protect-if-modified distlocks ebuild-locks fixlafiles merge-sync news parallel-fetch preserve-libs protect-owned sandbox sfperms strict unknown-features-warn unmerge-logs unmerge-orphans userfetch userpriv usersandbox usersync xattr"
FFLAGS="-march=westmere -O2 -pipe"
GENTOO_MIRRORS="ftp://ftp.free.fr/mirrors/ftp.gentoo.org/http://gentoo.modulix.net/gentoo/ http://gentoo.mirrors.ovh.net/gentoo-distfiles/ ftp://gentoo.imj.fr/pub/gentoo/ http://mirror.qubenet.net/mirror/gentoo/ http://de-mirror.org/gentoo/ http://gentoo.tiscali.nl/"
LANG="en_US.UTF-8"
LDFLAGS="-Wl,-O1 -Wl,--sort-common -Wl,--as-needed"
LINGUAS="en fr"
MAKEOPTS="-j1"
PKGDIR="/usr/portage/packages"
PORTAGE_CONFIGROOT="/"
PORTAGE_TMPDIR="/var/tmp"
USE="X a52 aac acl alsa amd64 apng base berkdb bindist bluray bzip2 cairo caja cdda cddb cdio cdr consolekit cracklib crypt cups cxx dbus dri dts dvd dvdr dvdread encode exif extras faac faad ffmpeg flac gdbm gdu gif gpm gtk ico iconv icu ieee1394 ios ipod ipv6 jpeg jpeg2k lame libass libguess libmpeg2 mad matroska mjpeg mmx modules mp3 mpeg mtp mudflap multilib ncurses nls nptl nsplugin ogg opengl openmp openrc-force pam pcre pdf png policykit postproc pppd python quicktime readline resolvconf sndfile sse sse2 ssl svg taglib tcpd themes theora tiff truetype twolame udev udisks unicode v4l vorbis vpx wav wavpack webp win32codecs wmf x264 x265 xattr xml xvid zlib" ABI_X86="64" ALSA_CARDS="hda-intel" ALSA_PCM_PLUGINS="adpcm alaw asym copy dmix dshare dsnoop empty extplug file hooks iec958 ioplug ladspa lfloat linear meter mmap_emul mulaw multi null plug rate route share shm softvol" APACHE2_MODULES="actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache cgi cgid dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias authn_core authz_core socache_shmcb unixd" CALLIGRA_FEATURES="kexi words flow plan sheets stage tables krita karbon braindump author" CAMERAS="ptp2" COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog" CPU_FLAGS_X86="aes mmx mmxext popcnt sse sse2 sse3 sse4_1 sse4_2 ssse3" ELIBC="glibc" GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 garmin garmintxt gpsclock itrax mtk3301 nmea ntrip navcom oceanserver oldstyle oncore rtcm104v2 rtcm104v3 sirf superstar2 timing tsip tripmate tnt ublox ubx" GRUB_PLATFORMS="efi-64 pc" INPUT_DEVICES="evdev" KERNEL="linux" L10N="en fr" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LIBREOFFICE_EXTENSIONS="presenter-console presenter-minimizer" LINGUAS="en fr" OFFICE_IMPLEMENTATION="libreoffice" PHP_TARGETS="php5-6" PYTHON_SINGLE_TARGET="python3_4" PYTHON_TARGETS="python2_7 python3_4" QEMU_SOFTMMU_TARGETS="i386 x86_64" QEMU_USER_TARGETS="i386 x86_64" RUBY_TARGETS="ruby20 ruby21 ruby22" USERLAND="GNU" VIDEO_CARDS="fglrx" XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset ipp2p iface geoip fuzzy condition tee tarpit sysrq steal rawnat logmark ipmark dhcpmac delude chaos account"
Unset:  CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LC_ALL, PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS
 

Link to comment
Share on other sites
 Share
Go to question listing
×
×
  • Create New...