seyt Posted May 7, 2016 Report Share Posted May 7, 2016 Hello funtoo users, I have some problems to setup network on my funtoo laptop. First I have emerged linuxfirmware and gentoo source. I have compiled my kernel with all Wireless Drivers as modules. On my fresh install they are not ethernet and no wifi. Here is my ifconfig -a output: lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10<host> loop txqueuelen 0 (Local Loopback) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 as you can see it's only the loopback. You can check also my lspci output: 00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller (rev 06) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06) 00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06) 00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06) 00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 05) 00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 (rev d5) 00:1c.3 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #4 (rev d5) 00:1c.4 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #5 (rev d5) 00:1c.5 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #6 (rev d5) 00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation HM86 Express LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 05) 00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 05) 01:00.0 3D controller: NVIDIA Corporation GM108M [GeForce 840M] (rev a2) 03:00.0 Ethernet controller: Qualcomm Atheros Killer E220x Gigabit Ethernet Controller (rev 13) 04:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5249 PCI Express Card Reader (rev 01) 05:00.0 Network controller: Intel Corporation Wireless 3160 (rev 83) I don't really know how to setup wifi and wich firmware I must install ... If you have ideas, any help will be appreciated :) thanks seyt Link to comment Share on other sites More sharing options...
0 cardinal Posted May 7, 2016 Report Share Posted May 7, 2016 Google search points to many issues with Intel Corporation Wireless 3160 (rev 83) Requires iwlwifi module and specific firmware installed. Provide this additional information please. Post the verified links to the pasted output of these long commands: lspci -nn | wgetpaste lsmod | wgetpaste dmesg | wgetpaste Post output showing your kernel version: uname -a Stable or Current install? Link to comment Share on other sites More sharing options...
0 seyt Posted May 11, 2016 Author Report Share Posted May 11, 2016 I have manually installed networkmanager. Resolved Link to comment Share on other sites More sharing options...
Question
seyt
Hello funtoo users,
I have some problems to setup network on my funtoo laptop.
First I have emerged linuxfirmware and gentoo source. I have compiled my kernel with all Wireless Drivers as modules.
On my fresh install they are not ethernet and no wifi.
Here is my ifconfig -a output:
as you can see it's only the loopback.
You can check also my lspci output:
I don't really know how to setup wifi and wich firmware I must install ...
If you have ideas, any help will be appreciated :)
thanks
seyt
Link to comment
Share on other sites
2 answers to this question
Recommended Posts