Jump to content
  • 0

Pulseaudio not detecting mic after @world upgrade


fermuch
 Share

Question

Since the last upgrade, pulseaudio doesn't load any mic. I sometimes use the internal mic from the notebook, and sometimes I connect an external one.
The profiles in pavucontrol only show "analog stereo output", and they used to show "analog stereo duplex".
 
I see the mic is detected with dmesg:

 

? ~ dmesg | grep HDA

[    4.779666] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input5
[    4.779911] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    4.779938] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    4.779964] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
 

 

But if I do pacmd list-sources, I only see a monitor.

 

1 source(s) available.

  * index: 1
        name: <alsa_output.pci-0000_00_1b.0.analog-stereo.monitor>
        driver: <module-alsa-card.c>
        flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
        state: SUSPENDED
        suspend cause: IDLE 
        priority: 1950
        volume: front-left: 65536 / 100% / 0,00 dB,   front-right: 65536 / 100% / 0,00 dB
                balance 0,00
        base volume: 65536 / 100% / 0,00 dB
        volume steps: 65537
        muted: yes
        current latency: 0,00 ms
        max rewind: 0 KiB
        sample spec: s16le 2ch 44100Hz
        channel map: front-left,front-right
                     Stereo
        used by: 0
        linked by: 0
        configured latency: 0,00 ms; range is 0,50 .. 371,52 ms
        monitor_of: 1
        card: 0 <alsa_card.pci-0000_00_1b.0>
        module: 27
        properties:
                device.description = "Monitor of Built-in Audio Analog Stereo"
                device.class = "monitor"
                alsa.card = "0"
                alsa.card_name = "HDA Intel PCH"
                alsa.long_card_name = "HDA Intel PCH at 0xf0800000 irq 26"
                alsa.driver_name = "snd_hda_intel"
                device.bus_path = "pci-0000:00:1b.0"
                sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
                device.bus = "pci"
                device.vendor.id = "8086"
                device.vendor.name = "Intel Corporation"
                device.product.id = "1c20"
                device.product.name = "6 Series/C200 Series Chipset Family High Definition Audio Controller"
                device.form_factor = "internal"
                device.string = "0"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"

 

 

 

I don't know what I should do to recover the mic. My /etc/pulse was not modified in the last upgrade, so I am a little lost.

Link to comment
Share on other sites

0 answers to this question

Recommended Posts

There have been no answers to this question yet

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...