Jump to content
Forums in Read-Only Mode - Please use Reddit ×
  • 0

All binaries in stage3 will not execute

ballsystemlord

Asked by ballsystemlord,

 Share

Question

ballsystemlord Newbie

ballsystemlord

Posted
Posted

I'm encountering a strange problem while trying to install funtoo
on my desktop. The files which I extract from the stage 3 tarball
refuse to be executed.
I tried the following (not in this order):
Mounted filesystem --rw -o exec.
fsck -f /dev/sda3
cp bin/bash /root && /root/bash
cp /bin/bash . && chroot . bash -l
The above command failed because bash could not find the shared
object (.so) files.
tar -xpf stage3*
cat bin/bash
find bin -exec file --mime-type '{}' \; | grep -v application/x-executable
I then executed bin/gunzip as it was a shell script and it ran fine.
I tried changing my PATH.
I always get the same error for all operations.
Here's the name of the stage 3 tarball:
-rwxr-xr-x 1 root root 300494916 May 26 06:54 /mnt/gentoo/stage3-amd64-bulldozer-funtoo-stable-2015-05-25.tar.xz

Here's the error I get when executing a binary file:
zsh: no such file or directory: /mnt/gentoo/bin/bash

The files show up with ls.

The version of the cd I'm using is 4.5.0.
The kernel is 3.14.31 std450 amd64.
A simmilar problem occurs when using knoppix from a dvd (knoppix is 32bit,
version 7.2 kernel 3.9.6, this rescue cd is 64bit, booted UEFI with the
black screen, default option).
The error is:
bash: /media/sda3/bin/bash: cannot execute binary file

If I boot it in 64bit mode it returns the same error as above (except
that knoppix is using bash, of course). I suppose that it might be a bad
archive, but then xz uses 64bit crc checksums so xz should have said
something to tar indicative of an error. I just decompressed it with
plain xz and used echo $?, there is no error. Of course you can turn off
the checksum but I doubt you would have, I typically change it to sha256.

Here's my hardware list from lspci -vk :
 

00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (external gfx0 port B) (rev 02)
	Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (external gfx0 port B)
	Flags: fast devsel
	Capabilities: [f0] HyperTransport: MSI Mapping Enable+ Fixed+
	Capabilities: [c4] HyperTransport: Slave or Primary Interface
	Capabilities: [40] HyperTransport: Retry Mode
	Capabilities: [54] HyperTransport: UnitID Clumping
	Capabilities: [9c] HyperTransport: #1a
	Capabilities: [70] MSI: Enable- Count=1/4 Maskable- 64bit-

00:02.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (PCI express gpp port B) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 0000e000-0000efff
	Memory behind bridge: fea00000-feafffff
	Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
	Capabilities: [50] Power Management version 3
	Capabilities: [58] Express Root Port (Slot+), MSI 00
	Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit-
	Capabilities: [b0] Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Device 5a14
	Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
	Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
	Capabilities: [190] Access Control Services
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:04.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (PCI express gpp port D) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	Memory behind bridge: fe900000-fe9fffff
	Capabilities: [50] Power Management version 3
	Capabilities: [58] Express Root Port (Slot+), MSI 00
	Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit-
	Capabilities: [b0] Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Device 5a14
	Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
	Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
	Capabilities: [190] Access Control Services
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:09.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (PCI express gpp port H) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	I/O behind bridge: 0000d000-0000dfff
	Memory behind bridge: fe800000-fe8fffff
	Prefetchable memory behind bridge: 00000000d0000000-00000000d00fffff
	Capabilities: [50] Power Management version 3
	Capabilities: [58] Express Root Port (Slot+), MSI 00
	Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit-
	Capabilities: [b0] Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Device 5a14
	Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
	Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
	Capabilities: [190] Access Control Services
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] (rev 40) (prog-if 01 [AHCI 1.0])
	Subsystem: Gigabyte Technology Co., Ltd Device b002
	Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 19
	I/O ports at f040 [size=8]
	I/O ports at f030 [size=4]
	I/O ports at f020 [size=8]
	I/O ports at f010 [size=4]
	I/O ports at f000 [size=16]
	Memory at feb0b000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: [70] SATA HBA v1.0
	Capabilities: [a4] PCI Advanced Features
	Kernel driver in use: ahci

00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller (prog-if 10 [OHCI])
	Subsystem: Gigabyte Technology Co., Ltd Device 5004
	Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 18
	Memory at feb0a000 (32-bit, non-prefetchable) [size=4K]
	Kernel driver in use: ohci-pci

00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller (prog-if 20 [EHCI])
	Subsystem: Gigabyte Technology Co., Ltd Device 5004
	Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 17
	Memory at feb09000 (32-bit, non-prefetchable) [size=256]
	Capabilities: [c0] Power Management version 2
	Capabilities: [e4] Debug port: BAR=1 offset=00e0
	Kernel driver in use: ehci-pci

00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller (prog-if 10 [OHCI])
	Subsystem: Gigabyte Technology Co., Ltd Device 5004
	Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 18
	Memory at feb08000 (32-bit, non-prefetchable) [size=4K]
	Kernel driver in use: ohci-pci

00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller (prog-if 20 [EHCI])
	Subsystem: Gigabyte Technology Co., Ltd Device 5004
	Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 17
	Memory at feb07000 (32-bit, non-prefetchable) [size=256]
	Capabilities: [c0] Power Management version 2
	Capabilities: [e4] Debug port: BAR=1 offset=00e0
	Kernel driver in use: ehci-pci

00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller (rev 42)
	Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller
	Flags: 66MHz, medium devsel
	Kernel driver in use: piix4_smbus
	Kernel modules: i2c_piix4, sp5100_tco

00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) (rev 40)
	Subsystem: Gigabyte Technology Co., Ltd Device a014
	Flags: slow devsel, IRQ 10
	Memory at feb00000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: [50] Power Management version 2

00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller (rev 40)
	Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller
	Flags: bus master, 66MHz, medium devsel, latency 0

00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge (rev 40) (prog-if 01 [Subtractive decode])
	Flags: bus master, VGA palette snoop, 66MHz, medium devsel, latency 64
	Bus: primary=00, secondary=04, subordinate=04, sec-latency=64

00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller (prog-if 10 [OHCI])
	Subsystem: Gigabyte Technology Co., Ltd Device 5004
	Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 18
	Memory at feb06000 (32-bit, non-prefetchable) [size=4K]
	Kernel driver in use: ohci-pci

00:16.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller (prog-if 10 [OHCI])
	Subsystem: Gigabyte Technology Co., Ltd Device 5004
	Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 18
	Memory at feb05000 (32-bit, non-prefetchable) [size=4K]
	Kernel driver in use: ohci-pci

00:16.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller (prog-if 20 [EHCI])
	Subsystem: Gigabyte Technology Co., Ltd Device 5004
	Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 17
	Memory at feb04000 (32-bit, non-prefetchable) [size=256]
	Capabilities: [c0] Power Management version 2
	Capabilities: [e4] Debug port: BAR=1 offset=00e0
	Kernel driver in use: ehci-pci

00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor HyperTransport Configuration
	Flags: fast devsel
	Capabilities: [80] HyperTransport: Host or Secondary Interface

00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Address Map
	Flags: fast devsel

00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor DRAM Controller
	Flags: fast devsel
	Kernel modules: amd64_edac_mod

00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Miscellaneous Control
	Flags: fast devsel
	Capabilities: [f0] Secure device <?>
	Kernel driver in use: k10temp
	Kernel modules: k10temp

00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Link Control
	Flags: fast devsel

01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Cape Verde XT [Radeon HD 7770/8760 / R7 250X] (prog-if 00 [VGA controller])
	Subsystem: Micro-Star International Co., Ltd. [MSI] R7770-PMD1GD5
	Flags: bus master, fast devsel, latency 0, IRQ 74
	Memory at c0000000 (64-bit, prefetchable) [size=256M]
	Memory at fea00000 (64-bit, non-prefetchable) [size=256K]
	I/O ports at e000 [size=256]
	Expansion ROM at fea40000 [disabled] [size=128K]
	Capabilities: [48] Vendor Specific Information: Len=08 <?>
	Capabilities: [50] Power Management version 3
	Capabilities: [58] Express Legacy Endpoint, MSI 00
	Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
	Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
	Capabilities: [150] Advanced Error Reporting
	Capabilities: [270] #19
	Kernel driver in use: radeon
	Kernel modules: radeon

01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series]
	Subsystem: Micro-Star International Co., Ltd. [MSI] Device aab0
	Flags: fast devsel, IRQ 7
	Memory at fea60000 (64-bit, non-prefetchable) [disabled] [size=16K]
	Capabilities: [48] Vendor Specific Information: Len=08 <?>
	Capabilities: [50] Power Management version 3
	Capabilities: [58] Express Legacy Endpoint, MSI 00
	Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
	Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
	Capabilities: [150] Advanced Error Reporting

02:00.0 USB controller: VIA Technologies, Inc. Device 3483 (rev 01) (prog-if 30 [XHCI])
	Subsystem: Gigabyte Technology Co., Ltd Device 5007
	Flags: bus master, fast devsel, latency 0, IRQ 72
	Memory at fe900000 (64-bit, non-prefetchable) [size=4K]
	Capabilities: [80] Power Management version 3
	Capabilities: [90] MSI: Enable+ Count=1/4 Maskable- 64bit+
	Capabilities: [c4] Express Endpoint, MSI 00
	Capabilities: [100] Advanced Error Reporting
	Kernel driver in use: xhci_hcd

03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)
	Subsystem: Gigabyte Technology Co., Ltd Motherboard
	Flags: bus master, fast devsel, latency 0, IRQ 73
	I/O ports at d000 [size=256]
	Memory at fe800000 (64-bit, non-prefetchable) [size=4K]
	Memory at d0000000 (64-bit, prefetchable) [size=16K]
	Capabilities: [40] Power Management version 3
	Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
	Capabilities: [70] Express Endpoint, MSI 01
	Capabilities: [b0] MSI-X: Enable- Count=4 Masked-
	Capabilities: [d0] Vital Product Data
	Capabilities: [100] Advanced Error Reporting
	Capabilities: [140] Virtual Channel
	Capabilities: [160] Device Serial Number 01-00-00-00-68-4c-e0-00
	Kernel driver in use: r8169
	Kernel modules: r8169
Link to comment
Share on other sites

1 answer to this question

Recommended Posts

  • 0
ballsystemlord Newbie

ballsystemlord

Posted
  • Author
Posted

Figured it out at last, I was using the bulldozer stage3 tarball when I needed that stage3 k10 tarball, so, strange though it may seem, instead of signalling because of an illegal instruction in the executing of any of the afore mentioned binaries, I got a: no such file or dir error.

Link to comment
Share on other sites
 Share
Go to question listing
×
×
  • Create New...