Jump to content
Forums in Read-Only Mode - Please use Reddit ×
  • 0

Super Slow Desktop Screen Refresh

dougbmorris

Asked by dougbmorris,

 Share

Question

dougbmorris Newbie

dougbmorris

Posted
Posted

Any insights into what to try to fix the screen refresh or the lesser issues would be welcome.
I am out of package masking ideas. I have no idea what to address.

I have updated my kernel and then @world after months. World update was 243 packages. As a result, the desktop display is painfully slow, 2-5 seconds of delay is usual.  Less critically, but if you have insights, I also notice that in firefox 53.0 the text I highlight in a url or search box shows no highlighting and the cursor disappears. That is in addition to the scrollbar on xfce-terminal being nearly invisible because of poor contrast for some time. Seems like poor contrast is contagious.

Have Sony VAIO that has two GPUs. I have never been able to take advantage of that on Linux. Indeed, getting the xorg.conf to work was I nightmare because I need the both the 'intel' and 'radeon' drivers installed but I can only inform the Xserver about intel, for as long as I've used this laptop. Wondering if I have multi-GPU because of this Gentoo issue: "[sOLVED] Slow, lagging desktop GUI with AMDGPU-PRO" at https://forums.gentoo.org/viewtopic-p-8046212.html. I don't understand what got solved.
(In funtoo forum from Oleg I see: https://github.com/Lucretia/vulkan-overlay/issues/32, but not the same issue , it seems.) I don't see my problem online, which concerns me.

As part of my update I had replaced packages radeon-ucode and iwl6030-ucode with linux-firmware package. I tried going back to those original packages, did not change anything. I tried my previous (vanilla) kernel, did not change anything. I tried editing xorg.conf. No Xwindows came up when I tried xstart. I forced default config by renaming the xorg.conf file. Same refresh problem but with tiny resolution and big screen elements. I tried downgrading x11-base/xorg-server-1.19.1_p20170228:0/1.19.1_p20170228 to xorg-server-1.19.1 and 1.18.4. No change.  I tried downgrading xfdesktop from 4.13.0 to 4.12.3. Same refresh problem. I did a fresh emerge --sync and got some updates about 24 hours later and that did not help.

I could try mucking around with kernel configuration of memory I suppose. An alternative desktop? I am out of decent guesses. SOS.
What part of the architecture do I care about? Not care about for this problem?

 

Here is lspci:

 

00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4)
00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b4)
00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b4)
00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b4)
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation HM67 Express Chipset Family LPC Controller (rev 04)
00:1f.2 RAID bus controller: Intel Corporation 82801 Mobile SATA Controller [RAID mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04)
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Whistler [Radeon HD 6630M/6650M/6750M/7670M/7690M]
02:00.0 Network controller: Intel Corporation Centrino Advanced-N 6230 [Rainbow Peak] (rev 34)
03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card Reader (rev 01)
04:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04)
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)

 

Here is epro:

 

=== Enabled Profiles: ===

        arch: x86-64bit
       build: current
     subarch: intel64-sandybridge
      flavor: desktop
     mix-ins: xfce


=== All inherited flavors from desktop flavor: ===

                     workstation (from desktop flavor)
                            core (from workstation flavor)
                         minimal (from core flavor)

=== All inherited mix-ins from desktop flavor: ===

                               X (from workstation flavor)
                           audio (from workstation flavor)
                             dvd (from workstation flavor)
                           media (from workstation flavor)
      mediadevice-audio-consumer (from media mix-in)
                mediadevice-base (from mediadevice-audio-consumer mix-in)
      mediadevice-video-consumer (from media mix-in)
                mediadevice-base (from mediadevice-video-consumer mix-in)
        mediaformat-audio-common (from media mix-in)
          mediaformat-gfx-common (from media mix-in)
        mediaformat-video-common (from media mix-in)
                  console-extras (from workstation flavor)
                           print (from desktop flavor)

 

Here is Xorg.0.log from /var/log:

 

[   960.827]
X.Org X Server 1.19.1
Release Date: 2017-01-11
[   960.832] X Protocol Version 11, Revision 0
[   960.833] Build Operating System: Linux 4.11.3 x86_64 Gentoo
[   960.835] Current Operating System: Linux Locke 4.11.3 #1 SMP Fri May 26 18:17:11 EDT 2017 x86_64
[   960.835] Kernel command line: BOOT_IMAGE=/kernel-genkernel-x86_64-4.11.3 dolvm video=854x480 rootfstype=ext4 real_root=/dev/mapper/volgrp-fsroot rootfstype=ext4
[   960.839] Build Date: 27 May 2017  07:52:47PM
[   960.841]  
[   960.842] Current version of pixman: 0.34.0
[   960.845]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[   960.845] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   960.851] (==) Log file: "/var/log/Xorg.0.log", Time: Sat May 27 22:19:34 2017
[   960.853] (==) Using config file: "/etc/X11/xorg.conf"
[   960.854] (==) Using config directory: "/etc/X11/xorg.conf.d"
[   960.856] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   960.856] (==) ServerLayout "Default Layout"
[   960.856] (**) |-->Screen "Laptop Screen" (0)
[   960.856] (**) |   |-->Monitor "LVDS Output"
[   960.856] (**) |   |-->Device "Intel"
[   960.856] (**) |   |-->GPUDevice "Radeon"
[   960.856] (**) |-->Input Device "Mouse0"
[   960.856] (**) Option "DRI2" "on"
[   960.856] (==) Automatically adding devices
[   960.856] (==) Automatically enabling devices
[   960.856] (==) Automatically adding GPU devices
[   960.856] (==) Max clients allowed: 256, resource mask: 0x1fffff
[   960.856] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/misc/".
[   960.856]     Entry deleted from font path.
[   960.856]     (Run 'mkfontdir' on "/usr/share/fonts/misc/").
[   960.856] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[   960.856]     Entry deleted from font path.
[   960.856] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[   960.856]     Entry deleted from font path.
[   960.856] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[   960.856]     Entry deleted from font path.
[   960.856]     (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[   960.856] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[   960.856]     Entry deleted from font path.
[   960.856]     (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[   960.856] (==) FontPath set to:
    /usr/share/fonts/TTF/
[   960.856] (==) ModulePath set to "/usr/lib64/xorg/modules"
[   960.856] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[   960.856] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[   960.856] (WW) Disabling Mouse0
[   960.856] (II) Loader magic: 0x807760
[   960.856] (II) Module ABI versions:
[   960.856]     X.Org ANSI C Emulation: 0.4
[   960.856]     X.Org Video Driver: 23.0
[   960.856]     X.Org XInput driver : 24.1
[   960.856]     X.Org Server Extension : 10.0
[   960.857] (II) xfree86: Adding drm device (/dev/dri/card1)
[   960.857] (II) xfree86: Adding drm device (/dev/dri/card0)
[   960.868] (--) PCI:*(0:0:2:0) 8086:0116:104d:907b rev 9, Mem @ 0xc0000000/4194304, 0xb0000000/268435456, I/O @ 0x00008000/64, BIOS @ 0x????????/131072
[   960.868] (--) PCI: (0:1:0:0) 1002:6741:104d:907b rev 0, Mem @ 0xa0000000/268435456, 0xc8400000/131072, I/O @ 0x00007000/256, BIOS @ 0x????????/131072
[   960.868] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[   960.868] (II) LoadModule: "dbe"
[   960.869] (II) Module "dbe" already built-in
[   960.869] (II) LoadModule: "dri"
[   960.869] (II) Module "dri" already built-in
[   960.869] (II) LoadModule: "dri2"
[   960.869] (II) Module "dri2" already built-in
[   960.869] (II) LoadModule: "extmod"
[   960.869] (II) Module "extmod" already built-in
[   960.869] (II) LoadModule: "glx"
[   960.869] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[   960.870] (II) Module glx: vendor="X.Org Foundation"
[   960.870]     compiled for 1.19.1, module version = 1.0.0
[   960.870]     ABI class: X.Org Server Extension, version 10.0
[   960.870] (II) LoadModule: "record"
[   960.870] (II) Module "record" already built-in
[   960.870] (II) LoadModule: "radeon"
[   960.870] (II) Loading /usr/lib64/xorg/modules/drivers/radeon_drv.so
[   960.871] (II) Module radeon: vendor="X.Org Foundation"
[   960.871]     compiled for 1.19.1, module version = 7.8.0
[   960.871]     Module class: X.Org Video Driver
[   960.871]     ABI class: X.Org Video Driver, version 23.0
[   960.871] (II) LoadModule: "intel"
[   960.871] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so
[   960.871] (II) Module intel: vendor="X.Org Foundation"
[   960.871]     compiled for 1.19.1, module version = 2.99.917
[   960.871]     Module class: X.Org Video Driver
[   960.871]     ABI class: X.Org Video Driver, version 23.0
[   960.871] (II) LoadModule: "radeon"
[   960.871] (II) Loading /usr/lib64/xorg/modules/drivers/radeon_drv.so
[   960.871] (II) Module radeon: vendor="X.Org Foundation"
[   960.871]     compiled for 1.19.1, module version = 7.8.0
[   960.871]     Module class: X.Org Video Driver
[   960.871]     ABI class: X.Org Video Driver, version 23.0
[   960.871] (II) RADEON: Driver for ATI/AMD Radeon chipsets:
    ATI Radeon Mobility X600 (M24), ATI FireMV 2400,
    ATI Radeon Mobility X300 (M24), ATI FireGL M24 GL,
    ATI Radeon X600 (RV380), ATI FireGL V3200 (RV380),
    ATI Radeon IGP320 (A3), ATI Radeon IGP330/340/350 (A4),
    ATI Radeon 9500, ATI Radeon 9600TX, ATI FireGL Z1, ATI Radeon 9800SE,
    ATI Radeon 9800, ATI FireGL X2, ATI Radeon 9600, ATI Radeon 9600SE,
    ATI Radeon 9600XT, ATI FireGL T2, ATI Radeon 9650, ATI FireGL RV360,
    ATI Radeon 7000 IGP (A4+), ATI Radeon 8500 AIW,
    ATI Radeon IGP320M (U1), ATI Radeon IGP330M/340M/350M (U2),
    ATI Radeon Mobility 7000 IGP, ATI Radeon 9000/PRO, ATI Radeon 9000,
    ATI Radeon X800 (R420), ATI Radeon X800PRO (R420),
    ATI Radeon X800SE (R420), ATI FireGL X3 (R420),
    ATI Radeon Mobility 9800 (M18), ATI Radeon X800 SE (R420),
    ATI Radeon X800XT (R420), ATI Radeon X800 VE (R420),
    ATI Radeon X850 (R480), ATI Radeon X850 XT (R480),
    ATI Radeon X850 SE (R480), ATI Radeon X850 PRO (R480),
    ATI Radeon X850 XT PE (R480), ATI Radeon Mobility M7,
    ATI Mobility FireGL 7800 M7, ATI Radeon Mobility M6,
    ATI FireGL Mobility 9000 (M9), ATI Radeon Mobility 9000 (M9),
    ATI Radeon 9700 Pro, ATI Radeon 9700/9500Pro, ATI FireGL X1,
    ATI Radeon 9800PRO, ATI Radeon 9800XT,
    ATI Radeon Mobility 9600/9700 (M10/M11),
    ATI Radeon Mobility 9600 (M10), ATI Radeon Mobility 9600 (M11),
    ATI FireGL Mobility T2 (M10), ATI FireGL Mobility T2e (M11),
    ATI Radeon, ATI FireGL 8700/8800, ATI Radeon 8500, ATI Radeon 9100,
    ATI Radeon 7500, ATI Radeon VE/7000, ATI ES1000,
    ATI Radeon Mobility X300 (M22), ATI Radeon Mobility X600 SE (M24C),
    ATI FireGL M22 GL, ATI Radeon X800 (R423), ATI Radeon X800PRO (R423),
    ATI Radeon X800LE (R423), ATI Radeon X800SE (R423),
    ATI Radeon X800 XTP (R430), ATI Radeon X800 XL (R430),
    ATI Radeon X800 SE (R430), ATI Radeon X800 (R430),
    ATI FireGL V7100 (R423), ATI FireGL V5100 (R423),
    ATI FireGL unknown (R423), ATI Mobility FireGL V5000 (M26),
    ATI Mobility Radeon X700 XL (M26), ATI Mobility Radeon X700 (M26),
    ATI Radeon X550XTX, ATI Radeon 9100 IGP (A5),
    ATI Radeon Mobility 9100 IGP (U3), ATI Radeon XPRESS 200,
    ATI Radeon XPRESS 200M, ATI Radeon 9250, ATI Radeon 9200,
    ATI Radeon 9200SE, ATI FireMV 2200, ATI Radeon X300 (RV370),
    ATI Radeon X600 (RV370), ATI Radeon X550 (RV370),
    ATI FireGL V3100 (RV370), ATI FireMV 2200 PCIE (RV370),
    ATI Radeon Mobility 9200 (M9+), ATI Mobility Radeon X800 XT (M28),
    ATI Mobility FireGL V5100 (M28), ATI Mobility Radeon X800 (M28),
    ATI Radeon X850, ATI unknown Radeon / FireGL (R480),
    ATI Radeon X800XT (R423), ATI FireGL V5000 (RV410),
    ATI Radeon X700 XT (RV410), ATI Radeon X700 PRO (RV410),
    ATI Radeon X700 SE (RV410), ATI Radeon X700 (RV410),
    ATI Radeon X1800, ATI Mobility Radeon X1800 XT,
    ATI Mobility Radeon X1800, ATI Mobility FireGL V7200,
    ATI FireGL V7200, ATI FireGL V5300, ATI Mobility FireGL V7100,
    ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
    ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
    ATI Mobility Radeon X1400, ATI Radeon X1550 64-bit,
    ATI Mobility Radeon X1300, ATI Radeon X1300, ATI FireGL V3300,
    ATI FireGL V3350, ATI Mobility Radeon X1450,
    ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
    ATI FireMV 2250, ATI Radeon X1650, ATI Mobility FireGL V5200,
    ATI Mobility Radeon X1600, ATI Radeon X1300 XT/X1600 Pro,
    ATI FireGL V3400, ATI Mobility FireGL V5250,
    ATI Mobility Radeon X1700, ATI Mobility Radeon X1700 XT,
    ATI FireGL V5200, ATI Radeon X2300HD, ATI Mobility Radeon HD 2300,
    ATI Radeon X1950, ATI Radeon X1900, ATI AMD Stream Processor,
    ATI RV560, ATI Mobility Radeon X1900, ATI Radeon X1950 GT, ATI RV570,
    ATI FireGL V7400, ATI Radeon 9100 PRO IGP,
    ATI Radeon Mobility 9200 IGP, ATI Radeon X1200, ATI RS740,
    ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro,
    ATI Radeon HD 2900 GT, ATI FireGL V8650, ATI FireGL V8600,
    ATI FireGL V7600, ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
    ATI Radeon HD 4850 x2, ATI FirePro V8750 (FireGL),
    ATI FirePro V7760 (FireGL), ATI Mobility RADEON HD 4850,
    ATI Mobility RADEON HD 4850 X2, ATI FirePro RV770,
    AMD FireStream 9270, AMD FireStream 9250, ATI FirePro V8700 (FireGL),
    ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
    ATI FirePro M7750, ATI M98, ATI Mobility Radeon HD 4650,
    ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670,
    ATI FirePro M5750, ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
    ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
    ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
    ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
    ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
    ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI RV610,
    ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro,
    ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI Radeon HD 2350,
    ATI Mobility Radeon HD 2400 XT, ATI Mobility Radeon HD 2400,
    ATI RADEON E2400, ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
    ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
    ATI Mobility Radeon HD 3850 X2, ATI Mobility Radeon HD 3870,
    ATI Mobility Radeon HD 3870 X2, ATI Radeon HD3870 X2,
    ATI FireGL V7700, ATI Radeon HD3690, AMD Firestream 9170,
    ATI Radeon HD 4550, ATI Radeon RV710, ATI Radeon HD 4350,
    ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
    ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
    ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
    ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
    ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
    ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
    ATI FireGL V3600, ATI Radeon HD 2600 LE,
    ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
    ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
    ATI Radeon HD 3450, ATI Radeon HD 3430, ATI FirePro V3700,
    ATI FireMV 2450, ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
    ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
    ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
    ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
    ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
    ATI Radeon HD 3300 Graphics, ATI Radeon 3000 Graphics, SUMO, SUMO2,
    ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200,
    ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
    AMD Radeon HD 6310 Graphics, AMD Radeon HD 6250 Graphics,
    AMD Radeon HD 6300 Series Graphics,
    AMD Radeon HD 6200 Series Graphics, PALM, CYPRESS,
    ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
    AMD Firestream 9350, ATI Radeon HD 5800 Series,
    ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
    ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
    ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
    ATI Radeon HD 5670, ATI Radeon HD 5570, ATI Radeon HD 5500 Series,
    REDWOOD, ATI Mobility Radeon Graphics, CEDAR, ATI FirePro 2270,
    ATI Radeon HD 5450, CAYMAN, AMD Radeon HD 6900 Series,
    AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series, BARTS,
    AMD Radeon HD 6800 Series, AMD Radeon HD 6700 Series, TURKS, CAICOS,
    ARUBA, TAHITI, PITCAIRN, VERDE, OLAND, HAINAN, BONAIRE, KABINI,
    MULLINS, KAVERI, HAWAII
[   960.873] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
    i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
    915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
    Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
    GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[   960.873] (II) intel: Driver for Intel(R) HD Graphics
[   960.873] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[   960.873] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[   960.873] (--) using VT number 7

[   960.886] (II) [KMS] Kernel modesetting enabled.
[   960.886] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20170123
[   960.887] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 3000
[   960.887] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx; using a maximum of 2 threads
[   960.887] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[   960.887] (==) intel(0): RGB weight 888
[   960.887] (==) intel(0): Default visual is TrueColor
[   960.887] (II) intel(0): Output LVDS1 using monitor section LVDS Output
[   960.887] (**) intel(0): Option "PreferredMode" "my1600x900"
[   960.887] (**) intel(0): Option "DefaultModes" "off"
[   960.950] (**) intel(0): Found backlight control interface intel_backlight (type 'raw') for output LVDS1
[   960.950] (II) intel(0): Enabled output LVDS1
[   960.950] (II) intel(0): Output VGA1 has no monitor section
[   960.950] (II) intel(0): Enabled output VGA1
[   960.950] (II) intel(0): Output HDMI1 has no monitor section
[   960.950] (II) intel(0): Enabled output HDMI1
[   960.950] (II) intel(0): Output DP1 has no monitor section
[   960.950] (II) intel(0): Enabled output DP1
[   960.950] (II) intel(0): Output HDMI2 has no monitor section
[   960.950] (II) intel(0): Enabled output HDMI2
[   960.950] (II) intel(0): Output DP2 has no monitor section
[   960.950] (II) intel(0): Enabled output DP2
[   960.950] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[   960.950] (II) intel(0): Output VIRTUAL1 has no monitor section
[   960.950] (II) intel(0): Enabled output VIRTUAL1
[   960.951] (II) intel(0): EDID for output LVDS1
[   960.951] (II) intel(0): Printing probed modes for output LVDS1
[   960.951] (II) intel(0): Modeline "my1600x900"x59.9  118.25  1600 1696 1856 2112  900 903 908 934 -hsync +vsync (56.0 kHz UP)
[   960.951] (II) intel(0): Modeline "1920x1080"x60.0  144.20  1920 1968 2040 2116  1080 1083 1088 1137 -hsync -vsync (68.1 kHz P)
[   960.951] (II) intel(0): Modeline "my1368x768"x59.9   85.25  1368 1440 1576 1784  768 771 781 798 -hsync +vsync (47.8 kHz)
[   960.951] (II) intel(0): Modeline "my1280x720"x59.9   74.50  1280 1344 1472 1664  720 723 728 748 -hsync +vsync (44.8 kHz)
[   960.951] (II) intel(0): Modeline "856x480"x60.0   31.75  856 872 960 1064  480 481 484 497 -hsync +vsync (29.8 kHz)
[   960.951] (II) intel(0): EDID for output DP1
[   960.951] (II) intel(0): EDID for output DP2
[   960.959] (II) intel(0): EDID for output HDMI1
[   960.967] (II) intel(0): EDID for output HDMI2
[   960.972] (II) intel(0): EDID for output VGA1
[   960.972] (II) intel(0): EDID for output VIRTUAL1
[   960.972] (II) intel(0): Output LVDS1 connected
[   960.972] (II) intel(0): Output DP1 disconnected
[   960.972] (II) intel(0): Output DP2 disconnected
[   960.973] (II) intel(0): Output HDMI1 disconnected
[   960.973] (II) intel(0): Output HDMI2 disconnected
[   960.973] (II) intel(0): Output VGA1 disconnected
[   960.973] (II) intel(0): Output VIRTUAL1 disconnected
[   960.973] (II) intel(0): Using user preference for initial modes
[   960.973] (II) intel(0): Output LVDS1 using initial mode my1600x900 +0+0
[   960.973] (==) intel(0): TearFree disabled
[   960.973] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[   960.973] (==) intel(0): DPI set to (96, 96)
[   960.973] (II) Loading sub module "dri3"
[   960.973] (II) LoadModule: "dri3"
[   960.973] (II) Module "dri3" already built-in
[   960.973] (II) Loading sub module "dri2"
[   960.973] (II) LoadModule: "dri2"
[   960.973] (II) Module "dri2" already built-in
[   960.973] (II) Loading sub module "present"
[   960.973] (II) LoadModule: "present"
[   960.973] (II) Module "present" already built-in
[   960.973] (==) RADEON(G0): Depth 24, (--) framebuffer bpp 32
[   960.973] (II) RADEON(G0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[   960.973] (==) RADEON(G0): Default visual is TrueColor
[   960.973] (==) RADEON(G0): RGB weight 888
[   960.973] (II) RADEON(G0): Using 8 bits per RGB (8 bit DAC)
[   960.973] (--) RADEON(G0): Chipset: "TURKS" (ChipID = 0x6741)
[   960.973] (II) Loading sub module "fb"
[   960.973] (II) LoadModule: "fb"
[   960.973] (II) Loading /usr/lib64/xorg/modules/libfb.so
[   960.974] (II) Module fb: vendor="X.Org Foundation"
[   960.974]     compiled for 1.19.1, module version = 1.0.0
[   960.974]     ABI class: X.Org ANSI C Emulation, version 0.4
[   960.974] (II) Loading sub module "dri2"
[   960.974] (II) LoadModule: "dri2"
[   960.974] (II) Module "dri2" already built-in
[   960.974] (II) Loading sub module "exa"
[   960.974] (II) LoadModule: "exa"
[   960.974] (II) Loading /usr/lib64/xorg/modules/libexa.so
[   960.974] (II) Module exa: vendor="X.Org Foundation"
[   960.974]     compiled for 1.19.1, module version = 2.6.0
[   960.974]     ABI class: X.Org Video Driver, version 23.0
[   960.974] (II) RADEON(G0): KMS Color Tiling: enabled
[   960.974] (II) RADEON(G0): KMS Color Tiling 2D: enabled
[   960.974] (II) RADEON(G0): KMS Pageflipping: enabled
[   960.974] (II) RADEON(G0): SwapBuffers wait for vsync: enabled
[   960.974] (**) RADEON(G0): Option "ModeDebug" "on"
[   960.974] (II) RADEON(G0): mem size init: gart size :3fdde000 vram size: s:40000000 visible:fc9d000
[   960.974] (II) RADEON(G0): EXA: Driver will allow EXA pixmaps in VRAM
[   960.974] (==) RADEON(G0): DPI set to (96, 96)
[   960.974] (==) RADEON(G0): Using gamma correction (1.0, 1.0, 1.0)
[   960.974] (II) Loading sub module "ramdac"
[   960.974] (II) LoadModule: "ramdac"
[   960.974] (II) Module "ramdac" already built-in
[   960.974] (==) Depth 24 pixmap format is 32 bpp
[   960.974] (II) RADEON(G0): [DRI2] Setup complete
[   960.974] (II) RADEON(G0): [DRI2]   DRI driver: r600
[   960.974] (II) RADEON(G0): [DRI2]   VDPAU driver: r600
[   960.974] (II) RADEON(G0): Front buffer size: 3072K
[   960.974] (II) RADEON(G0): VRAM usage limit set to 229957K
[   960.975] (==) RADEON(G0): DRI3 disabled
[   960.975] (==) RADEON(G0): Backing store enabled
[   960.975] (II) RADEON(G0): Direct rendering enabled
[   960.975] (II) EXA(256): Driver allocated offscreen pixmaps
[   960.975] (II) EXA(256): Driver registered support for the following operations:
[   960.975] (II)         Solid
[   960.975] (II)         Copy
[   960.975] (II)         Composite (RENDER acceleration)
[   960.975] (II)         UploadToScreen
[   960.975] (II)         DownloadFromScreen
[   960.975] (II) RADEON(G0): Acceleration enabled
[   960.975] (==) RADEON(G0): DPMS enabled
[   960.975] (==) RADEON(G0): Silken mouse enabled
[   960.975] (II) RADEON(G0): Set up textured video
[   960.975] (II) RADEON(G0): [XvMC] Associated with Radeon Textured Video.
[   960.975] (II) RADEON(G0): [XvMC] Extension initialized.
[   960.975] (II) RADEON(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[   960.975] (WW) RADEON(G0): Option "Monitor-LVDS1" is not used
[   960.975] (WW) RADEON(G0): Option "DefaultModes" is not used
[   960.975] (WW) RADEON(G0): Option "IgnoreEDID" is not used
[   960.975] (II) intel(0): SNA initialized with Sandybridge (gen6, gt2) backend
[   960.975] (==) intel(0): Backing store enabled
[   960.975] (==) intel(0): Silken mouse enabled
[   960.975] (II) intel(0): HW Cursor enabled
[   960.975] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[   960.975] (==) intel(0): DPMS enabled
[   960.975] (==) intel(0): Display hotplug detection enabled
[   960.975] (II) intel(0): [DRI2] Setup complete
[   960.975] (II) intel(0): [DRI2]   DRI driver: i965
[   960.975] (II) intel(0): [DRI2]   VDPAU driver: va_gl
[   960.975] (II) intel(0): direct rendering: DRI2 enabled
[   960.975] (II) intel(0): hardware support for Present enabled
[   960.975] (WW) intel(0): Option "PreferredMode" is not used
[   960.975] (WW) intel(0): Option "DefaultModes" is not used
[   960.975] (WW) intel(0): Option "IgnoreEDID" is not used
[   960.975] (--) RandR disabled
[   960.989] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[   960.989] (II) AIGLX: enabled GLX_ARB_create_context
[   960.989] (II) AIGLX: enabled GLX_ARB_create_context_profile
[   960.989] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[   960.989] (II) AIGLX: enabled GLX_INTEL_swap_event
[   960.989] (II) AIGLX: enabled GLX_SGI_swap_control
[   960.989] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[   960.989] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[   960.989] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[   960.990] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[   960.990] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[   960.990] (II) AIGLX: Loaded and initialized i965
[   960.990] (II) GLX: Initialized DRI2 GL provider for screen 0
[   960.992] (II) intel(0): switch to mode 1600x900@59.9 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[   961.000] (II) intel(0): Setting screen physical size to 423 x 238
[   961.000] (II) intel(0): resizing framebuffer to 1600x900
[   961.020] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[   961.020] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[   961.020] (II) LoadModule: "evdev"
[   961.020] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[   961.021] (II) Module evdev: vendor="X.Org Foundation"
[   961.021]     compiled for 1.19.1, module version = 2.10.5
[   961.021]     Module class: X.Org XInput Driver
[   961.021]     ABI class: X.Org XInput driver, version 24.1
[   961.021] (II) Using input driver 'evdev' for 'Video Bus'
[   961.021] (**) Video Bus: always reports core events
[   961.021] (**) evdev: Video Bus: Device: "/dev/input/event8"
[   961.021] (--) evdev: Video Bus: Vendor 0 Product 0x6
[   961.021] (--) evdev: Video Bus: Found keys
[   961.021] (II) evdev: Video Bus: Configuring as keyboard
[   961.021] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:09/input/input9/event8"
[   961.021] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
[   961.021] (**) Option "xkb_rules" "evdev"
[   961.021] (II) config/udev: Adding input device Sony Vaio Keys (/dev/input/event4)
[   961.021] (**) Sony Vaio Keys: Applying InputClass "evdev keyboard catchall"
[   961.021] (II) Using input driver 'evdev' for 'Sony Vaio Keys'
[   961.021] (**) Sony Vaio Keys: always reports core events
[   961.021] (**) evdev: Sony Vaio Keys: Device: "/dev/input/event4"
[   961.021] (--) evdev: Sony Vaio Keys: Vendor 0x104d Product 0
[   961.021] (--) evdev: Sony Vaio Keys: Found keys
[   961.021] (II) evdev: Sony Vaio Keys: Configuring as keyboard
[   961.021] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/SNY5001:00/input/input5/event4"
[   961.021] (II) XINPUT: Adding extended input device "Sony Vaio Keys" (type: KEYBOARD, id 7)
[   961.021] (**) Option "xkb_rules" "evdev"
[   961.022] (II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/event5)
[   961.022] (**) Sony Vaio Jogdial: Applying InputClass "evdev keyboard catchall"
[   961.022] (II) Using input driver 'evdev' for 'Sony Vaio Jogdial'
[   961.022] (**) Sony Vaio Jogdial: always reports core events
[   961.022] (**) evdev: Sony Vaio Jogdial: Device: "/dev/input/event5"
[   961.022] (--) evdev: Sony Vaio Jogdial: Vendor 0x104d Product 0
[   961.022] (--) evdev: Sony Vaio Jogdial: Found 2 mouse buttons
[   961.022] (--) evdev: Sony Vaio Jogdial: Found scroll wheel(s)
[   961.022] (--) evdev: Sony Vaio Jogdial: Found relative axes
[   961.022] (II) evdev: Sony Vaio Jogdial: Forcing relative x/y axes to exist.
[   961.022] (II) evdev: Sony Vaio Jogdial: Configuring as mouse
[   961.022] (II) evdev: Sony Vaio Jogdial: Adding scrollwheel support
[   961.022] (**) evdev: Sony Vaio Jogdial: YAxisMapping: buttons 4 and 5
[   961.022] (**) evdev: Sony Vaio Jogdial: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   961.022] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/SNY5001:00/input/input6/event5"
[   961.022] (II) XINPUT: Adding extended input device "Sony Vaio Jogdial" (type: MOUSE, id 8)
[   961.022] (II) evdev: Sony Vaio Jogdial: initialized for relative axes.
[   961.022] (**) Sony Vaio Jogdial: (accel) keeping acceleration scheme 1
[   961.022] (**) Sony Vaio Jogdial: (accel) acceleration profile 0
[   961.022] (**) Sony Vaio Jogdial: (accel) acceleration factor: 2.000
[   961.022] (**) Sony Vaio Jogdial: (accel) acceleration threshold: 4
[   961.022] (II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/mouse1)
[   961.022] (II) No input driver specified, ignoring this device.
[   961.022] (II) This device may have been added with another device file.
[   961.022] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[   961.022] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[   961.022] (II) Using input driver 'evdev' for 'Video Bus'
[   961.022] (**) Video Bus: always reports core events
[   961.022] (**) evdev: Video Bus: Device: "/dev/input/event7"
[   961.022] (--) evdev: Video Bus: Vendor 0 Product 0x6
[   961.022] (--) evdev: Video Bus: Found keys
[   961.022] (II) evdev: Video Bus: Configuring as keyboard
[   961.022] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:26/LNXVIDEO:00/input/input8/event7"
[   961.022] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 9)
[   961.022] (**) Option "xkb_rules" "evdev"
[   961.023] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[   961.023] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   961.023] (II) Using input driver 'evdev' for 'Power Button'
[   961.023] (**) Power Button: always reports core events
[   961.023] (**) evdev: Power Button: Device: "/dev/input/event3"
[   961.023] (--) evdev: Power Button: Vendor 0 Product 0x1
[   961.023] (--) evdev: Power Button: Found keys
[   961.023] (II) evdev: Power Button: Configuring as keyboard
[   961.023] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4/event3"
[   961.023] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 10)
[   961.023] (**) Option "xkb_rules" "evdev"
[   961.023] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[   961.023] (II) No input driver specified, ignoring this device.
[   961.023] (II) This device may have been added with another device file.
[   961.024] (II) config/udev: Adding input device USB2.0 Camera (/dev/input/event14)
[   961.024] (**) USB2.0 Camera: Applying InputClass "evdev keyboard catchall"
[   961.024] (II) Using input driver 'evdev' for 'USB2.0 Camera'
[   961.024] (**) USB2.0 Camera: always reports core events
[   961.024] (**) evdev: USB2.0 Camera: Device: "/dev/input/event14"
[   961.024] (--) evdev: USB2.0 Camera: Vendor 0x5ca Product 0x18c0
[   961.024] (--) evdev: USB2.0 Camera: Found keys
[   961.024] (II) evdev: USB2.0 Camera: Configuring as keyboard
[   961.024] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input15/event14"
[   961.024] (II) XINPUT: Adding extended input device "USB2.0 Camera" (type: KEYBOARD, id 11)
[   961.024] (**) Option "xkb_rules" "evdev"
[   961.024] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event11)
[   961.024] (II) No input driver specified, ignoring this device.
[   961.024] (II) This device may have been added with another device file.
[   961.024] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event12)
[   961.024] (II) No input driver specified, ignoring this device.
[   961.024] (II) This device may have been added with another device file.
[   961.024] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event13)
[   961.024] (II) No input driver specified, ignoring this device.
[   961.024] (II) This device may have been added with another device file.
[   961.025] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event9)
[   961.025] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[   961.025] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[   961.025] (**) Logitech USB Receiver: always reports core events
[   961.025] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event9"
[   961.090] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[   961.090] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[   961.090] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[   961.090] (--) evdev: Logitech USB Receiver: Found relative axes
[   961.090] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[   961.090] (II) evdev: Logitech USB Receiver: Configuring as mouse
[   961.090] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[   961.090] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[   961.090] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   961.090] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/0003:046D:C52F.0001/input/input11/event9"
[   961.090] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 12)
[   961.090] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[   961.090] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[   961.090] (**) Logitech USB Receiver: (accel) acceleration profile 0
[   961.090] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[   961.090] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[   961.090] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse2)
[   961.090] (II) No input driver specified, ignoring this device.
[   961.090] (II) This device may have been added with another device file.
[   961.091] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event10)
[   961.091] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[   961.091] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[   961.091] (**) Logitech USB Receiver: always reports core events
[   961.091] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event10"
[   961.091] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[   961.091] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
[   961.091] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[   961.091] (--) evdev: Logitech USB Receiver: Found relative axes
[   961.091] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
[   961.091] (--) evdev: Logitech USB Receiver: Found absolute axes
[   961.091] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[   961.091] (--) evdev: Logitech USB Receiver: Found keys
[   961.091] (II) evdev: Logitech USB Receiver: Configuring as mouse
[   961.091] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[   961.091] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[   961.091] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[   961.091] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   961.091] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1/0003:046D:C52F.0002/input/input12/event10"
[   961.091] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 13)
[   961.091] (**) Option "xkb_rules" "evdev"
[   961.091] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[   961.091] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[   961.091] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[   961.091] (**) Logitech USB Receiver: (accel) acceleration profile 0
[   961.091] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[   961.091] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[   961.091] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[   961.091] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[   961.091] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[   961.091] (**) AT Translated Set 2 keyboard: always reports core events
[   961.091] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[   961.091] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[   961.091] (--) evdev: AT Translated Set 2 keyboard: Found keys
[   961.091] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[   961.091] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[   961.091] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[   961.091] (**) Option "xkb_rules" "evdev"
[   961.092] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event1)
[   961.092] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[   961.092] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[   961.092] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[   961.092] (II) LoadModule: "synaptics"
[   961.092] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so
[   961.092] (II) Module synaptics: vendor="X.Org Foundation"
[   961.092]     compiled for 1.19.1, module version = 1.9.0
[   961.092]     Module class: X.Org XInput Driver
[   961.092]     ABI class: X.Org XInput driver, version 24.1
[   961.092] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[   961.092] (**) SynPS/2 Synaptics TouchPad: always reports core events
[   961.092] (**) Option "Device" "/dev/input/event1"
[   961.190] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[   961.190] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5508 (res 47)
[   961.190] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4550 (res 70)
[   961.190] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[   961.190] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[   961.190] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[   961.190] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[   961.190] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[   961.190] (**) SynPS/2 Synaptics TouchPad: always reports core events
[   961.270] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event1"
[   961.270] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 15)
[   961.270] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[   961.270] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[   961.270] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.039
[   961.270] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[   961.270] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[   961.270] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[   961.270] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[   961.270] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[   961.270] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[   961.270] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[   961.270] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[   961.270] (II) No input driver specified, ignoring this device.
[   961.270] (II) This device may have been added with another device file.
[  1826.450] (II) AIGLX: Suspending AIGLX clients for VT switch
[  1838.105] (II) AIGLX: Resuming AIGLX clients after VT switch
[  1838.106] (II) intel(0): switch to mode 1600x900@59.9 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[  1839.180] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[  3685.730] (II) AIGLX: Suspending AIGLX clients for VT switch
[  3694.187] (II) AIGLX: Resuming AIGLX clients after VT switch
[  3694.187] (II) intel(0): switch to mode 1600x900@59.9 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[  3695.310] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
 
Link to comment
Share on other sites

1 answer to this question

Recommended Posts

 Share
Go to question listing
×
×
  • Create New...