Jump to content
funtoo forums

dougbmorris

Members
  • Content Count

    60
  • Joined

  • Last visited

Everything posted by dougbmorris

  1. Is AMD Ryzen CPU extremely new? If so, it could take a while for sys-apps-hwids to be updated for the backward engineering. If no distro of Linux works, that's likely the reason. There could be other new hardware in a new computer that requires Linux drivers not yet available. Or maybe it's something else.
  2. Same guy that made synth: Verrrieeee-eeenterrresting. I used ports directly in FreeBSD and the control on all the compiler options was great except that I didn't know what I was doing, with the compiler options or whatever. I have a new appreciation for inter-package configuration parameters. Never actually got to using synth. That was the next planned step. My old tower sounds like half a jet engine, which does not help me figure out how to configure FreeBSD. However, that OP link sorta answers my question on why Gentoo/Funtoo (but not Ubuntu) has a limited selection of old python packages: "Python modules are similar to perl, but are more volatile." That's saying something. Perl fundamentally violates every language design principle I was ever taught for being a pet 'natural' schitzo language. I'm studying PHP and tentatively learning to hate it as well, but everybody uses it. Here's a thought: design the language grammar first from the perspective of a philosopher, i.e. a real Ph.D. Fit application domain last, by redesign iterations as convenient. It seems that Gentoo has declined in popularity, which suggests to me (as only a guess) less upstream package support for Funtoo. I'm not the only one afraid to update it seems. Has the Linux Bazaar become too bizarre? Is Gentoo running on a skeleton crew with no superstar. I'm too technically perplexed to do anything but guess, as always. Were things easier to navigate up to about 5 or 10 years ago? I had to take a hiatus. All very eiinterreszting.
  3. * Searching for python ... [I-O] [ ] dev-lang/python-2.7.13-r1:2.7 [I-O] [ ] dev-lang/python-3.4.6-r1:3.4/3.4m [--O] [M ] dev-lang/python-3.5.3:3.5/3.5m [--O] [M ] dev-lang/python-3.5.3-r1:3.5/3.5m [--O] [M ] dev-lang/python-3.6.1-r2:3.6/3.6m I am interesting in latest stable python3 for newbie website development. I am interested in PHP since so popular, but also nginx, uWSGI, Django. Django version Python versions 1.8 2.7, 3.2 (until the end of 2016), 3.3, 3.4, 3.5 1.9, 1.10 2.7, 3.4, 3.5 1.11 2.7, 3.4, 3.5, 3.6 2.0 3.4, 3.5, 3.6 2.1 3.5, 3.6, 3.7 I wonder what dependencies portage has vis-a-vis eselect python list. I suppose setting eselect should not risk portage, right? The latest django package is 1.10. * Searching for django ... [--O] [M ] dev-python/django-1.4.22:0 [--O] [M-] dev-python/django-1.5.12:0 [--O] [M-] dev-python/django-1.6.11:0 [--O] [M ] dev-python/django-1.7.11:0 [--O] [ ] dev-python/django-1.8.9:0 [--O] [ ] dev-python/django-1.8.14:0 [--O] [M ] dev-python/django-1.9.9:0 [--O] [ ] dev-python/django-1.10:0 Seems strange to me that the unmasked choices of python are so few and old.
  4. I appreciate the advice. I will continue to experiment. Doing the emerge @preserved-rebuild at that point was a variation. I don't know order like I know idiot instructions. I will experiment with -K, revdep-rebuild (I forgot about that one), and giving SSH with privileged access to box to figure things out is not something I understand, but maybe I will stumble onto what it means. I asked a very narrow question, and perhaps you already know the question is irrelevant. I don't understand why it's irrelevant. Both of my log files start with: This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. If I run options -v and -V, I get output that fits the log files. Locke / # gcc -v Using built-in specs. COLLECT_GCC=/usr/x86_64-pc-linux-gnu/gcc-bin/5.4.0/gcc COLLECT_LTO_WRAPPER=/usr/libexec/gcc/x86_64-pc-linux-gnu/5.4.0/lto-wrapper Target: x86_64-pc-linux-gnu Configured with: ../gcc-5.4.0/configure --disable-libssp --enable-multilib --enable-version-specific-runtime-libs --enable-libmudflap --prefix=/usr --bindir=/usr/x86_64-pc-linux-gnu/gcc-bin/5.4.0 --includedir=/usr/lib/gcc/x86_64-pc-linux-gnu/5.4.0/include --datadir=/usr/share/gcc-data/x86_64-pc-linux-gnu/5.4.0 --mandir=/usr/share/gcc-data/x86_64-pc-linux-gnu/5.4.0/man --infodir=/usr/share/gcc-data/x86_64-pc-linux-gnu/5.4.0/info --with-gxx-include-dir=/usr/lib/gcc/x86_64-pc-linux-gnu/5.4.0/include/g++-v5.4.0 --enable-libstdcxx-time --enable-__cxa_atexit --enable-clocale=gnu --host=x86_64-pc-linux-gnu --build=x86_64-pc-linux-gnu --with-system-zlib --enable-obsolete --disable-werror --enable-secureplt --enable-lto --without-cloog --with-bugurl=http://bugs.funtoo.org --with-pkgversion='Funtoo 5.4.0' --with-mpfr-include=/var/tmp/portage/sys-devel/gcc-5.4.0/work/gcc-5.4.0/mpfr/src --with-mpfr-lib=/var/tmp/portage/sys-devel/gcc-5.4.0/work/objdir/mpfr/src/.libs --enable-libgomp --build=x86_64-pc-linux-gnu --enable-libgomp --enable-languages=c,c++,fortran --disable-libgcj --disable-esp --disable-libsanitizer Thread model: posix gcc version 5.4.0 (Funtoo 5.4.0) Locke / # gcc -V gcc: error: unrecognized command line option ā€˜-Vā€™ gcc: fatal error: no input files compilation terminated. Locke / # My title question remains, if only for my personal edification. Why would the flag -v be rerun as uppercase -V? Is the gcc command in fact being rerun? If so, kinda weird. The only double I can think of is the 2 graphics chips I have on this Sony Vaio Series S box. I'm using the Sandy Bridge variant. Of course I will keep experimenting. ------------------- I emerged gcc againbut with -K, did the source /etc/profile, and emerged binutils with -K. No problems with binutils. Not sure why. Then I tried emerge -K glibc. Good call on the -K because I did not have a glibc binary. So I chroot-ed and got binaries for glibc and linux-headers (because I wanted to after I look at what the 'toolchain' is). I was able to emerge -K the glibc binary no problem. Next I try to update my @world with all the dependency trimmings and get: there are no ebuilds to satisfy ">=dev-libs/nss-3.34.1" Did ego sync, epro update, source /etc/profile, env-update, and retried emerge @world. This time I got something I got at the beginning of this journey: ...[skipped lines]... [ebuild U ] gnome-base/gvfs-1.28.3-r2 [1.28.3-r1] [ebuild U ] virtual/service-manager-1 [0] [blocks B ] dev-util/pkgconfig ("dev-util/pkgconfig" is blocking dev-util/pkgconf-1.2.2) [blocks B ] dev-util/pkgconf[pkg-config] ("dev-util/pkgconf[pkg-config]" is blocking dev-util/pkgconfig-0.29.2) It's the same issue all over again. I might be able to compile a new kernel. Thanks everyone for the help. If you got an edifying answer for -V, I'd love to hear it. Otherwise, over and out. I know you got better things to do.
  5. Hello, I am trying to do the 'System resurrection'. I can chroot and do 'quickpkg --include-config y @system'. I exit the chroot, copy over the cache, and try to emerge -k to get a working toolchain, which is why I can't update my system. This command did not fix the compiler functionality: emerge -avk1 @system So I tried piecemeal with gcc, binutils, and glibc. I ran 'emerge -avk1 gcc' and got good results until end of output: Locke ~ # emerge -avk1 gcc These are the packages that would be merged, in order: Calculating dependencies... done! [binary R ] sys-devel/gcc-5.4.0:5.4.0::core-kit USE="cxx fortran (multilib) nls openmp -ada (-altivec) -doc -graphite (-hardened) (-libssp) -objc -objc++ (-sanitize) -vanilla" 0 KiB Total: 1 package (1 reinstall, 1 binary), Size of downloads: 0 KiB Would you like to merge these packages? [Yes/No] ###...[SKIPPING OUTPUT LINES]...### --- replaced obj /etc/env.d/gcc/x86_64-pc-linux-gnu-5.4.0 --- replaced dir /etc/env.d/gcc --- replaced dir /etc/env.d --- replaced dir /etc >>> Regenerating /etc/ld.so.cache... >>> Original instance of package unmerged safely. * This does not appear to be a regular upgrade of gcc, so * gcc 5.4.0 will not be automatically enabled as the * default system compiler. * If you would like to make 5.4.0 the default system * compiler, then perform the following steps as root: * gcc-config x86_64-pc-linux-gnu-5.4.0 * source /etc/profile >>> sys-devel/gcc-5.4.0 merged. >>> Auto-cleaning packages... >>> No outdated packages were found on your system. * Regenerating GNU info directory index... * Processed 9 info files. !!! existing preserved libs: >>> package: xfce-base/libxfce4ui-4.13.3 * - /usr/lib64/libxfce4ui-2.so.0 * - /usr/lib64/libxfce4ui-2.so.0.0.0 * used by /usr/bin/exo-desktop-item-edit (xfce-base/exo-0.11.5) * used by /usr/lib64/libgarcon-gtk3-1.so.0.0.0 (xfce-base/garcon-0.6.1) * used by /usr/lib64/xfce4/exo-1/exo-helper-1 (xfce-base/exo-0.11.5) * - /usr/lib64/libxfce4ui-1.so.0 * - /usr/lib64/libxfce4ui-1.so.0.0.0 * used by /usr/lib64/libgarcon-gtk2-1.so.0.0.0 (xfce-base/garcon-0.6.1) Use emerge @preserved-rebuild to rebuild packages using these libraries Locke ~ # Locke ~ # gcc-config -l [1] x86_64-pc-linux-gnu-5.4.0 * Locke ~ # Locke ~ # # ^ I think already there because I am repeating steps to demonstrate what happened. Locke ~ # Locke ~ # gcc-config x86_64-pc-linux-gnu-5.4.0 * Switching native-compiler to x86_64-pc-linux-gnu-5.4.0 ... [ ok ] Locke ~ # gcc-config -l [1] x86_64-pc-linux-gnu-5.4.0 * I ran ' emerge @preserved-rebuild' and got an error that was logged by file /var/tmp/portage/xfce-base/xfconf-4.13.4/work/xfconf-4.13.4/config.log. I ran 'emerge -avk1 binutils' and got an error that was logged by file /var/tmp/portage/sys-devel/binutils-2.29.1-r1/work/build/config.log. The interesting parts are similar. Please notice (below after this paragraph) that there are two lines in each log file that are exactly the same except the change from -v to -V. I don't know if that is normal log output or not. Also note the call in each log file to: ../gcc-5.4.0/configure, which turns out to be a /bin/sh script per the shebang line. The second line of script configure describes the script's purpose as: Guess values for system-dependent variables and create Makefiles. Third line says: Generated by GNU Autoconf 2.64. Similar part of .../xfconf-4.13.4/config.log: configure:3770: $? = 0 configure:3759: x86_64-pc-linux-gnu-gcc -v >&5 Using built-in specs. COLLECT_GCC=/usr/x86_64-pc-linux-gnu/gcc-bin/5.4.0/x86_64-pc-linux-gnu-gcc COLLECT_LTO_WRAPPER=/usr/libexec/gcc/x86_64-pc-linux-gnu/5.4.0/lto-wrapper Target: x86_64-pc-linux-gnu Configured with: ../gcc-5.4.0/configure --disable-libssp --enable-multilib --enable-version-specific-runtime-libs --enable-libmudflap --prefix=/usr --bindir=/usr/x86_64-pc-linux-gnu/gcc-bin/5.4.0 --includedir=/usr/lib/gcc/x86_64-pc-linux-gnu/5.4.0/include --datadir=/usr/share/gcc-data/x86_64-pc-linux-gnu/5.4.0 --mandir=/usr/share/gcc-data/x86_64-pc-linux-gnu/5.4.0/man --infodir=/usr/share/gcc-data/x86_64-pc-linux-gnu/5.4.0/info --with-gxx-include-dir=/usr/lib/gcc/x86_64-pc-linux-gnu/5.4.0/include/g++-v5.4.0 --enable-libstdcxx-time --enable-__cxa_atexit --enable-clocale=gnu --host=x86_64-pc-linux-gnu --build=x86_64-pc-linux-gnu --with-system-zlib --enable-obsolete --disable-werror --enable-secureplt --enable-lto --without-cloog --with-bugurl=http://bugs.funtoo.org --with-pkgversion='Funtoo 5.4.0' --with-mpfr-include=/var/tmp/portage/sys-devel/gcc-5.4.0/work/gcc-5.4.0/mpfr/src --with-mpfr-lib=/var/tmp/portage/sys-devel/gcc-5.4.0/work/objdir/mpfr/src/.libs --enable-libgomp --build=x86_64-pc-linux-gnu --enable-libgomp --enable-languages=c,c++,fortran --disable-libgcj --disable-esp --disable-libsanitizer Thread model: posix gcc version 5.4.0 (Funtoo 5.4.0) configure:3770: $? = 0 configure:3759: x86_64-pc-linux-gnu-gcc -V >&5 x86_64-pc-linux-gnu-gcc: error: unrecognized command line option '-V' x86_64-pc-linux-gnu-gcc: fatal error: no input files compilation terminated. Similar part of .../binutils-2.29.1-r1/work/build/config.log: configure:4290: $? = 0 configure:4279: x86_64-pc-linux-gnu-gcc -v >&5 Using built-in specs. COLLECT_GCC=/usr/x86_64-pc-linux-gnu/gcc-bin/5.4.0/x86_64-pc-linux-gnu-gcc COLLECT_LTO_WRAPPER=/usr/libexec/gcc/x86_64-pc-linux-gnu/5.4.0/lto-wrapper Target: x86_64-pc-linux-gnu Configured with: ../gcc-5.4.0/configure --disable-libssp --enable-multilib --enable-version-specific-runtime-libs --enable-libmudflap --prefix=/usr --bindir=/usr/x86_64-pc-linux-gnu/gcc-bin/5.4.0 --includedir=/usr/lib/gcc/x86_64-pc-linux-gnu/5.4.0/include --datadir=/usr/share/gcc-data/x86_64-pc-linux-gnu/5.4.0 --mandir=/usr/share/gcc-data/x86_64-pc-linux-gnu/5.4.0/man --infodir=/usr/share/gcc-data/x86_64-pc-linux-gnu/5.4.0/info --with-gxx-include-dir=/usr/lib/gcc/x86_64-pc-linux-gnu/5.4.0/include/g++-v5.4.0 --enable-libstdcxx-time --enable-__cxa_atexit --enable-clocale=gnu --host=x86_64-pc-linux-gnu --build=x86_64-pc-linux-gnu --with-system-zlib --enable-obsolete --disable-werror --enable-secureplt --enable-lto --without-cloog --with-bugurl=http://bugs.funtoo.org --with-pkgversion='Funtoo 5.4.0' --with-mpfr-include=/var/tmp/portage/sys-devel/gcc-5.4.0/work/gcc-5.4.0/mpfr/src --with-mpfr-lib=/var/tmp/portage/sys-devel/gcc-5.4.0/work/objdir/mpfr/src/.libs --enable-libgomp --build=x86_64-pc-linux-gnu --enable-libgomp --enable-languages=c,c++,fortran --disable-libgcj --disable-esp --disable-libsanitizer Thread model: posix gcc version 5.4.0 (Funtoo 5.4.0) configure:4290: $? = 0 configure:4279: x86_64-pc-linux-gnu-gcc -V >&5 x86_64-pc-linux-gnu-gcc: error: unrecognized command line option '-V' x86_64-pc-linux-gnu-gcc: fatal error: no input files compilation terminated. I notice that each call to ../gcc-5.4.0 has the option --with-gxx-include-dir=/usr/lib/gcc/x86_64-pc-linux-gnu/5.4.0/include/g++-v5.4.0 and I wonder, but doubt, the part that is 'g++-v5.4.0' would be interpreted as the end of the value with option --with-gxx-include-dir and the start of a -v option with value 5.4.0. Thanks for reading. config-binutils-2.29.1.log config-xfconf-4.13.4.log
  6. Tested what? You never posted your custom script.
  7. *** Solved: Try a Fresh Installation. ***
  8. *** Solved: Try a Fresh Installation. *** This thread installment documents my failed attempt to 'resurrect' my system with chroot and quickpkg. I'll condense it. I got the latest stage 3 tarball (stage3-intel64-sandybridge-funtoo-current-2018-01-31.tar.xz, 349981588 bytes) and untarred it using the -p option (tar xpvf <tarfile> -C <dir>). Little did I know that the tarball does not include the /var/git subdirectory tree,which may or may not be relevant. Using System Rescue CD x86-4.9.1, released 2017-1-1. It starts with the /bin/zsh not the /bin/bash shell. The CD does not shut down cleaning when I run 'reboot'. Instead it hands after printing to the console '* Saving dependency cache ...' I have no idea what a CD-R os must cache. I made two attempts. The first one is when I clumsily discovered I was running the zsh. Maybe it was the output for unhappy chroot that tipped me off to it. The crux of the failure on the first try was: sysresccd rescue # cp /etc/resolv.conf ./etc/ sysresccd rescue # mount --bind /proc ./proc/ sysresccd rescue # mount --bind /sys ./sys/ sysresccd rescue # pwd /mnt/myroot/root/rescue sysresccd rescue # mount --bind /dev ./dev/ sysresccd rescue # mount --bind /dev/pts ./dev/pt ptmx pts/ sysresccd rescue # mount --bind /dev/pts ./dev/pts sysresccd rescue # echo $SHELL /bin/bash sysresccd rescue # chroot /mnt/my myhome/ myroot/ sysresccd rescue # chroot /mnt/myroot/root/rescue/ sysresccd / # source /etc/profile sysresccd / # env-update !!! Unable to parse profile: '/etc/portage/make.profile' !!! ParseError: Parent 'core-kit:funtoo/1.0/linux-gnu/arch/x86-64bit' not found: '/etc/portage/make.profile/parent' >>> Regenerating /etc/ld.so.cache... sysresccd / # The content of file parent from the stage3 tarball was: core-kit:funtoo/1.0/linux-gnu/arch/x86-64bit core-kit:funtoo/1.0/linux-gnu/build/current core-kit:funtoo/1.0/linux-gnu/arch/x86-64bit/subarch/intel64-sandybridge core-kit:funtoo/1.0/linux-gnu/flavor/core core-hw-kit:funtoo/kits/python-kit/3.4-prime core-kit:funtoo/kits/python-kit/3.4-prime desktop-kit:funtoo/kits/python-kit/3.4-prime dev-kit:funtoo/kits/python-kit/3.4-prime editors-kit:funtoo/kits/python-kit/3.4-prime games-kit:funtoo/kits/python-kit/3.4-prime gnome-kit:funtoo/kits/python-kit/3.4-prime java-kit:funtoo/kits/python-kit/3.4-prime kde-kit:funtoo/kits/python-kit/3.4-prime media-kit:funtoo/kits/python-kit/3.4-prime net-kit:funtoo/kits/python-kit/3.4-prime nokit:funtoo/kits/python-kit/3.4-prime perl-kit:funtoo/kits/python-kit/3.4-prime php-kit:funtoo/kits/python-kit/3.4-prime python-kit:funtoo/kits/python-kit/3.4-prime science-kit:funtoo/kits/python-kit/3.4-prime security-kit:funtoo/kits/python-kit/3.4-prime text-kit:funtoo/kits/python-kit/3.4-prime xorg-kit:funtoo/kits/python-kit/3.4-prime So basically I discovered that I did not have the portage tree with the tarball content: doug@Locke ~/Downloads/stage3 $ find /var/git/ -name core-kit /var/git/meta-repo/.git/modules/kits/core-kit /var/git/meta-repo/kits/core-kit /var/git/meta-repo/repos.conf/core-kit doug@Locke ~/Downloads/stage3 $doug@Locke ~/Downloads/stage3 $ tar --list -f stage3-intel64-sandybridge-funtoo-current-2018-01-31.tar.xz|grep -e \/git\/\$ ./usr/lib64/python2.7/site-packages/portage/sync/modules/git/ ./usr/lib64/python3.4/site-packages/portage/sync/modules/git/ ./usr/share/git/ The current Install page has the section "Downloading the Portage Tree", which is essentially the command 'ego sync'. The System resurrection page does not say anything about getting the tree or meta-repo. Since I did not trust the Internet connection via the Live CD, I followed some of the instructions from the ReadMe of github's meta-repo page to get the meta-repo, /var/git/ subdirectory, added to my stage3 subtree. Well, restarted with the System Rescue CD, tested the shell with echo $SHELL and switched via 'SHELL=/bin/bash bash -l', started X-windows via 'startx', got the Internet connection in the desktop environment, and failed thusly: sysresccd rescue # chroot . sysresccd / # export PS1="(chroot) $PS1" (chroot) sysresccd / # source /etc/profile sysresccd / # env-update !!! Unable to parse profile: '/etc/portage/make.profile' !!! ParseError: Parent 'core-kit:funtoo/1.0/linux-gnu/arch/x86-64bit' not found: '/etc/portage/make.profile/parent' >>> Regenerating /etc/ld.so.cache... sysresccd / # ego sync Syncing meta-repo Already up-to-date. Syncing core-kit branch 1.0-prime Switched to branch '1.0-prime' Your branch is up-to-date with 'origin/1.0-prime'. HEAD is now at 78da7c1d updates remote: Counting objects: 12, done. remote: Compressing objects: 100% (4/4), done. remote: Total 12 (delta 7), reused 12 (delta 7), pack-reused 0 Unpacking objects: 100% (12/12), done. From https://github.com/funtoo/core-kit 78da7c1d..4d16cd43 1.0-prime -> origin/1.0-prime 71fd56a6..46f577dc 1.2-prime -> origin/1.2-prime Updating 78da7c1d..4d16cd43 ...[skipping output]... our branch is up-to-date with 'origin/master'. HEAD is now at df3822e07c updates Already up-to-date. Sync successful and kits in alignment! :) Updating profiles... !!! Unable to parse profile: '/etc/portage/make.profile' !!! ParseError: Parent 'core-kit:funtoo/1.0/linux-gnu/arch/x86-64bit' not found: '/etc/portage/make.profile/parent' Unable to find the repository name in /profiles/repo_name - exiting. sysresccd / # export PS1="(chroot) $PS1" (chroot) sysresccd / # pwd / (chroot) sysresccd / # ls profiles ls: cannot access profiles: No such file or directory (chroot) sysresccd / # ls bin boot dev etc home lib lib32 lib64 mnt opt proc root run sbin srv sys tmp usr var (chroot) sysresccd / # epro update !!! Unable to parse profile: '/etc/portage/make.profile' !!! ParseError: Parent 'core-kit:funtoo/1.0/linux-gnu/arch/x86-64bit' not found: '/etc/portage/make.profile/parent' Unable to find the repository name in /profiles/repo_name - exiting. (chroot) sysresccd / # quickpkg --include-config y @system !!! Unable to parse profile: '/etc/portage/make.profile' !!! ParseError: Parent 'core-kit:funtoo/1.0/linux-gnu/arch/x86-64bit' not found: '/etc/portage/make.profile/parent' * No packages found (chroot) sysresccd / # ls /var/git/meta-repo/ .git/ .gitmodules README.rst kits/ metadata/ repos.conf/ (chroot) sysresccd / # ls -l /var/git/meta-repo/kits/ The full attempt is in an attached file. resurrection_data_log2.txt
  9. I can only guess you need to push your configuration changes into your current environment. The manpage for ego-profile does not show action update, but it is seen via running 'ego profile -h'. You could also run 'epro -h'. Sometimes it is useful to 'source /etc/profile' and then 'env-update'. Maybe you should back up (undo your changes with .xinitrc) and try to 'push' your configuration setting through, or just reboot and hope nothing is foobar about rebooting. If you don't boot up with X-windows, I doubt you will have a problem with that, but I don't actually know. Good luck.
  10. bcowan, I'm preparing to try palica's solution. It looks to be a concise and updated version of the System resurrection page. Maybe something from the output in the attached text file will jump out at you before I take the plunge. I waited to update because I wanted to get a project done not struggle with admin work. This is the price I pay. It may be a good investment because I intend to set up a practice server on an old vertical box, if it still works. That's the start of phase two of my project. When I do figure out how to use technology for my specific purposes, it ain't figured quickly. lol bases_covered.txt
  11. Locke etc # gcc-config --list-profiles [1] x86_64-pc-linux-gnu-5.4.0 * Locke etc #
  12. bcowan, you and palica are quite knowledgable. I will carefully study the points you suggested. Thanks. I wondered if I could delete builds in /usr/portage/sys-devel, that apparently are just ignored (renamed the build files to see). Locke portage # find / -name gcc\*5.4\* /usr/portage/sys-devel/gcc/gcc-5.4.0.ebuild /usr/portage/distfiles/gcc-5.4.0-patches-1.3.tar.bz2 /usr/portage/distfiles/gcc-5.4.0.tar.bz2 /usr/portage/metadata/md5-cache/sys-devel/gcc-5.4.0 /usr/share/gcc-data/x86_64-pc-linux-gnu/5.4.0/gcc-5.4.0 /usr/bin/gcc-5.4.0 /var/db/pkg/sys-devel/gcc-5.4.0 /var/db/pkg/sys-devel/gcc-5.4.0/gcc-5.4.0.ebuild /var/git/meta-repo/kits/core-kit/metadata/md5-cache/sys-devel/gcc-5.4.0 /var/git/meta-repo/kits/core-kit/sys-devel/gcc/gcc-5.4.0.ebuild I will look at the tarball chroot environment when the time comes to see what isn't there.
  13. Maybe I should reformulate my question: What is the difference between quickpkg and emerge --buildpkgonly? Neither do I understand the difference between install -d /mnt/rescue and mkdir /mnt/rescue except that install could set permissions which makes it better idiomatically for installation purposes. ---------------------------------- The System resurrection page currently reads: In the following example capture everything installed within the "source environment" that is related sys-devel/gcc (4.4.5 is present on the system) is captured in a single archive named gcc-4.4.5.tbz2 located in /usr/portage/packages/sys-devel: # quickpkg sys-devel/gcc If you need to recompile a package instead of archiving an already deployed version (and of course without installing it on your "source environment"), just do: # emerge --buildpkgonly sys-devel/gcc I wonder if RECOMPILE A PACKAGE and ARCHIVING AN ALREADY DEPLOYED VERSION should be switched around the INSTEAD OF to read something like: In the following example capture everything installed within the "source environment" that is related sys-devel/gcc (4.4.5 is present on the system) is captured in a single archive named gcc-4.4.5.tbz2 located in /usr/portage/packages/sys-devel: # quickpkg sys-devel/gcc If you would rather archive an already deployed version (perhaps useful for later) and restore from that archive instead of simply recompiling the package(s), just do: # emerge --buildpkgonly sys-devel/gcc You wouldn't want to install the archive content into your working chroot "source environment" because that's where the archive content came from. ---- I also wonder if the --include-config y arguments to quickpkg would be a good idea, as palica has suggested to solve my current toolchain issues. I leave it to more knowledgable people to decide what is best.
  14. bcowan, there was nothing inappropriate about your previous reply, and you are absolutely right: my compiler links are broken, though I lack the technical knowledge to have put it that way. I rebooted since yesterday, and so I suspect some of the functionality I had only in memory or where ever from the overwritten installation is gone. I can't successfully do: emerge -1 gcc, so I can't reinstall the toolchain. Looks like system resurrection as kindly suggested by palica or failing that reinstall are my final options. I don't know what magic incantation Oleg can suggest. I don't think the output he suggested is of much use they way it turned out, but I'll wait a bit for his possible reply before I try the aggressive options I just mentioned. I've been wondering lately if BSD might be more reliable than any Gnu/Linux system because the Gnu/Linux universe is so diverse, but that is rhetorical on this thread, and probably frustration + wishful thinking. I know BDFL Daniel Robbins is more or less irreplaceable. I struggle less with his Gnu/Linux distros. I wonder what BDFL might say about "the future of funtoo - the funtooture" in hindsight, which might merit a new thread. What struck me was: "I want to start using the 3-clause BSD license for future Funtoo work. This would keep things more consistent with OpenRC, openresolv, and dhcpcd and give us more opportunities in the BSD direction." I'm too ignorant to have much of an opinion on such technicalities, but BDFL has a way of getting to the essentials plainly. Kits makes sense to me. Too bad it requires curation work and additional, persistent overhead, but then having X11 do what it did, enough to bother even him, is worse. P.S. I just stumbled across the "Toolchain update" page, which may or may not be the best way in general to update the toolchain: emerge --sync # emerge -1 glibc # emerge -uNDav @world P.S.P.S Note to self: emerge -av --depclean --exclude sys-devel/gcc Oh look!, under "Troubleshooting": revdep-rebuild
  15. Oleg, the output you suggested: Locke etc # binutils-config -l [1] x86_64-pc-linux-gnu-2.29.1 Locke etc # palica, I appreciate constructive advice but not trolling, and will filter for the gold accordingly. I choose what I do on my box and in my life, or do you take responsibility for my success? I saw that a newbie recommended something that at least in part I can't do based on pesky facts and reality: As I explained, I don't have a gcc module with eselect ('gcc' is alphabetically between 'fontconfig' and 'java-vm', which is why I asked if the advice from bcowan that I actually could try was a good idea: Locke etc # eselect Usage: eselect <global options> <module name> <module options> Global options: --brief Make output shorter --colour=<yes|no|auto> Enable or disable colour output (default 'auto') Built-in modules: help Display a help message usage Display a usage message version Display version information Extra modules: binutils Manage installed versions of sys-devel/binutils cdparanoia Manage /usr/bin/cdparanoia implementation ecj Manage ECJ targets editor Manage the EDITOR environment variable env Manage environment variables set in /etc/env.d/ fontconfig Manage fontconfig /etc/fonts/conf.d/ symlinks java-vm Manage the Java system and user VM kernel Manage the /usr/src/linux symlink locale Manage the LANG environment variable maven Manage Maven targets mesa Manage the OpenGL driver architecture used by media-libs/mesa modules Query eselect modules news Read Gentoo ("GLEP 42") news items notify-send Manage /usr/bin/notify-send implementation opengl Manage the OpenGL implementation used by your system pager Manage the PAGER environment variable pinentry Manage /usr/bin/pinentry implementation profile Manage the make.profile symlink python Manage Python interpreter preferences qtgraphicssystem Manage the system-wide active Qt Graphics System rc Manage /etc/init.d scripts in runlevels ruby Manage Ruby symlinks vi Manage /usr/bin/vi implementations visual Manage the VISUAL environment variable Locke etc #
  16. Thanks, bcowan. When I run eselect, to list the modules, none of the modules are gcc (or gcc-user). I rebooted and got: '* /etc.init.d/<various> uses runscript, please convert to openrc-run.'. I used a find-sed command I found online (find /etc/init.d -type f -exec sed -i 's/runscript/openrc-run/' {} +) after I backed up the int.d directory with cp -rpP init.d init.d.bk: I tried revdep-rebuild and emerge @preserved-rebuild, no changes were made. To get updated at all, I updated my @world by first dropping the --with-bdeps=y and got some of the whole @world updated. Then I dropped -D and got to this point. I just tried the @world update with the whole thing (command is below) and got an interesting message (and, yes, I appreciate the useful message, funtoo engineers; so what's it mean?): Locke etc # emerge -uNDa --with-bdeps=y @world These are the packages that would be merged, in order: Calculating dependencies... done! Oops! Conflicts have been encountered: >>> xfce-extra/xfce4-power-manager-1.6.0-r1:0/0::gentoo, installed, wants xfce-base/xfconf:0/0= >>> xfce-base/libxfce4ui-4.13.3:0/0::gentoo, installed, wants xfce-base/xfconf:0/0= >>> xfce-base/xfce4-panel-4.13.1:0/0::xfce-kit, ebuild scheduled for merge, wants >=xfce-base/xfconf-4.13:= My candidates are: >>> xfce-base/xfconf-4.12.1:0/0::gentoo, installed has SLOT 0/0 >>> xfce-base/xfconf-4.13.4:0/3::xfce-kit, ebuild scheduled for merge has SLOT 0/3 We hope this informational output has been useful in identifying the problem. We are continually working to reduce conflicts. Do not hesitate to report a bug at https://bugs.funtoo.org. Thank you! :) emerge: there are no ebuilds to satisfy ">=dev-libs/nss-3.34.1". (dependency required by "www-client/firefox-58.0.1::net-kit" [ebuild]) (dependency required by "@selected" [set]) (dependency required by "@world" [argument]) Locke etc # Because of the X11 depreciation, I switched from XFCE to XLDE. There's more than one good desktop for Gnu/Linux. xfce-base/xfconf was not in my /var/lib/portage/world file. I unmerged (-C) it and all the xfce stuff in my world. Did the full strength @world update and as directed did the emerge @preserved-rebuild. I am using Firefox 52.6.0 now, which is fine I think. Running the last two commands provides some info. I wonder if I could use perl-cleaner somehow? Locke doug # emerge @preserved-rebuild Calculating dependencies... done! >>> Verifying ebuild manifests >>> Emerging (1 of 8) xfce-base/xfconf-4.13.4::xfce-kit * xfconf-4.13.4.tar.bz2 SHA256 SHA512 WHIRLPOOL size ;-) ... [ ok ] >>> Unpacking source... >>> Unpacking xfconf-4.13.4.tar.bz2 to /var/tmp/portage/xfce-base/xfconf-4.13.4/work >>> Source unpacked in /var/tmp/portage/xfce-base/xfconf-4.13.4/work >>> Preparing source in /var/tmp/portage/xfce-base/xfconf-4.13.4/work/xfconf-4.13.4 ... >>> Source prepared. >>> Configuring source in /var/tmp/portage/xfce-base/xfconf-4.13.4/work/xfconf-4.13.4 ... * econf: updating xfconf-4.13.4/config.sub with /usr/share/gnuconfig/config.sub * econf: updating xfconf-4.13.4/config.guess with /usr/share/gnuconfig/config.guess ./configure --prefix=/usr --build=x86_64-pc-linux-gnu --host=x86_64-pc-linux-gnu --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc --localstatedir=/var/lib --disable-dependency-tracking --disable-silent-rules --docdir=/usr/share/doc/xfconf-4.13.4 --htmldir=/usr/share/doc/xfconf-4.13.4/html --libdir=/usr/lib64 --disable-perl-bindings --disable-checks --with-perl-options=INSTALLDIRS=vendor checking for a BSD-compatible install... /usr/lib/portage/python3.4/ebuild-helpers/xattr/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether UID '250' is supported by ustar format... yes checking whether GID '250' is supported by ustar format... yes checking how to create a ustar tar archive... gnutar checking whether to enable maintainer-specific portions of Makefiles... no checking whether make supports nested variables... (cached) yes checking for style of include used by make... GNU checking for x86_64-pc-linux-gnu-gcc... x86_64-pc-linux-gnu-gcc checking whether the C compiler works... no configure: error: in `/var/tmp/portage/xfce-base/xfconf-4.13.4/work/xfconf-4.13.4': configure: error: C compiler cannot create executables See `config.log' for more details !!! Please attach the following file when seeking support: !!! /var/tmp/portage/xfce-base/xfconf-4.13.4/work/xfconf-4.13.4/config.log * ERROR: xfce-base/xfconf-4.13.4::xfce-kit failed (configure phase): * econf failed * * Call stack: * ebuild.sh, line 121: Called src_configure * environment, line 392: Called econf '--disable-perl-bindings' '--disable-checks' '--with-perl-options=INSTALLDIRS=vendor' * phase-helpers.sh, line 666: Called __helpers_die 'econf failed' * isolated-functions.sh, line 117: Called die * The specific snippet of code: * die "$@" * * If you need support, post the output of `emerge --info '=xfce-base/xfconf-4.13.4::xfce-kit'`, * the complete build log and the output of `emerge -pqv '=xfce-base/xfconf-4.13.4::xfce-kit'`. * The complete build log is located at '/var/tmp/portage/xfce-base/xfconf-4.13.4/temp/build.log'. * The ebuild environment file is located at '/var/tmp/portage/xfce-base/xfconf-4.13.4/temp/environment'. * Working directory: '/var/tmp/portage/xfce-base/xfconf-4.13.4/work/xfconf-4.13.4' * S: '/var/tmp/portage/xfce-base/xfconf-4.13.4/work/xfconf-4.13.4' >>> Failed to emerge xfce-base/xfconf-4.13.4, Log file: >>> '/var/tmp/portage/xfce-base/xfconf-4.13.4/temp/build.log' * Messages for package xfce-base/xfconf-4.13.4: * ERROR: xfce-base/xfconf-4.13.4::xfce-kit failed (configure phase): * econf failed * * Call stack: * ebuild.sh, line 121: Called src_configure * environment, line 392: Called econf '--disable-perl-bindings' '--disable-checks' '--with-perl-options=INSTALLDIRS=vendor' * phase-helpers.sh, line 666: Called __helpers_die 'econf failed' * isolated-functions.sh, line 117: Called die * The specific snippet of code: * die "$@" * * If you need support, post the output of `emerge --info '=xfce-base/xfconf-4.13.4::xfce-kit'`, * the complete build log and the output of `emerge -pqv '=xfce-base/xfconf-4.13.4::xfce-kit'`. * The complete build log is located at '/var/tmp/portage/xfce-base/xfconf-4.13.4/temp/build.log'. * The ebuild environment file is located at '/var/tmp/portage/xfce-base/xfconf-4.13.4/temp/environment'. * Working directory: '/var/tmp/portage/xfce-base/xfconf-4.13.4/work/xfconf-4.13.4' * S: '/var/tmp/portage/xfce-base/xfconf-4.13.4/work/xfconf-4.13.4' Locke doug # emerge -uNDa --with-bdeps=y @world These are the packages that would be merged, in order: Calculating dependencies... done! Oops! Conflicts have been encountered: >>> dev-cpp/libcmis-0.5.2_pre20160820-r1:0.5/0.5::gentoo, installed, wants dev-libs/boost:0/1.62.0= >>> app-office/libreoffice-bin-5.4.2.2:0/0::kde-kit, installed, wants dev-libs/boost:0/1.62.0= >>> dev-util/mdds-1.2.3:1/1.2::gentoo, installed, wants dev-libs/boost:0/1.62.0= >>> dev-libs/libixion-0.12.2:0/0.12::dev-kit, installed, wants dev-libs/boost:0/1.62.0= >>> dev-libs/liborcus-0.12.1:0/0.12::dev-kit, installed, wants dev-libs/boost:0/1.62.0= My candidates are: >>> dev-libs/boost-1.63.0:0/1.63.0::core-kit, ebuild scheduled for merge has SLOT 0/1.63.0 >>> dev-libs/boost-1.62.0-r1:0/1.62.0::gentoo, installed has SLOT 0/1.62.0 >>> dev-libs/boost-1.63.0:0/1.63.0::core-kit, ebuild scheduled for merge, wants =dev-util/boost-build-1.63* >>> dev-libs/boost-1.62.0-r1:0/1.62.0::gentoo, installed, wants =dev-util/boost-build-1.62* My candidates are: >>> dev-util/boost-build-1.63.0:0/0::core-kit, ebuild scheduled for merge has SLOT 0/0 >>> dev-util/boost-build-1.62.0-r1:0/0::gentoo, installed has SLOT 0/0 We hope this informational output has been useful in identifying the problem. We are continually working to reduce conflicts. Do not hesitate to report a bug at https://bugs.funtoo.org. Thank you! :) emerge: there are no ebuilds to satisfy ">=dev-libs/nss-3.34.1". (dependency required by "www-client/firefox-58.0.1::net-kit" [ebuild]) (dependency required by "@selected" [set]) (dependency required by "@world" [argument]) Locke doug # I'm pretty lost at this point. I don't think xfce stuff had anything to do with the problem because boost-build is cast into the same role. From the emerge @preserved-rebuild output, --with-perl-options=INSTALLDIRS=vendor, I wonder if perl-cleaner can be used somehow, maybe option --reallyall? I don't know what is pulling xfconf-4.13.4. Nothing in my world is xfce, nothing! But look. Locke doug # equery d xfconf-4.13.4 * These packages depend on xfconf-4.13.4: xfce-base/libxfce4ui-4.13.3 (>=xfce-base/xfconf-4.12) xfce-base/thunar-1.6.12 (>=xfce-base/xfconf-4.10) xfce-base/xfce4-appfinder-4.12.0-r1 (>=xfce-base/xfconf-4.10) xfce-base/xfce4-panel-4.12.0-r2 (>=xfce-base/xfconf-4.10) xfce-base/xfce4-session-4.12.1-r2 (>=xfce-base/xfconf-4.10:0/0) xfce-base/xfce4-settings-4.13.0 (>=xfce-base/xfconf-4.12) xfce-base/xfwm4-4.13.0 (>=xfce-base/xfconf-4.10) Locke doug # I unmerged (-C) all of that. emerge @preserved-rebuild fails as before. Does this mean anything to someone smart about ebuilds?: ERROR: xfce-base/xfconf-4.13.4::xfce-kit failed (configure phase): I am trying to attach the file /var/tmp/portage/xfce-base/xfconf-4.13.4/work/xfconf-4.13.4/config.log. I am out of ideas. If I am the only one with this problem, the odds of the build configuration being wrong are not high, are they? Does it make sense to do this: emerge in this order gcc binutils glibc? I think I'll take a shot with perl-cleaner unless someone advices against that. config.log
  17. Thanks, palica. Was not the problem. I ran the zcat command and got the exact same .config file, in same place, same result. I think it is a gcc problem. I want to install funtoo on an old box and was looking at installation instructions, also hoping for insight into my update problem. A command from the Install page is: gcc -march=native -Q --help=target | grep march, and the output (on the box with my kernel upgrade problem) is: Locke linux-4.14.16 # gcc -march=native -Q --help=target | grep march -march= sandybridge gcc: error trying to exec 'as': execvp: No such file or directory Locke linux-4.14.16 # So I think the problem is with my installation of gcc. I think I will try a downgrade of gcc. At this point I have no other ideas.
  18. I just updated my @world. I want to use my kernel configuration file for compiling a new kernel. Locke linux-4.15.0 # eselect kernel list Available kernel symlink targets: [1] linux-4.12.4-keeping [2] linux-4.15.0 * Locke linux-4.15.0 # make oldconfig HOSTCC scripts/basic/fixdep gcc: error trying to exec 'as': execvp: No such file or directory scripts/Makefile.host:90: recipe for target 'scripts/basic/fixdep' failed make[1]: *** [scripts/basic/fixdep] Error 1 Makefile:460: recipe for target 'scripts_basic' failed make: *** [scripts_basic] Error 2 Locke linux-4.15.0 # I masked vanilla-sources-4.15.0 and tried older kernel code: Locke linux-4.14.16 # make oldconfig HOSTCC scripts/basic/fixdep gcc: error trying to exec 'as': execvp: No such file or directory scripts/Makefile.host:102: recipe for target 'scripts/basic/fixdep' failed make[1]: *** [scripts/basic/fixdep] Error 1 Makefile:444: recipe for target 'scripts_basic' failed make: *** [scripts_basic] Error 2 Locke linux-4.14.16 # Line 444 from Makefile is: $(Q)$(MAKE) $(build)=scripts/basic Lines 101-2 from Makefile.host are: $(host-csingle): $(obj)/%: $(src)/%.c FORCE $(call if_changed_dep,host-csingle) Locke linux-4.14.16 # equery l -po gcc * Searching for gcc ... [-P-] [M ] sys-devel/gcc-4.8.5-r1:4.8.5 [-P-] [ ] sys-devel/gcc-4.9.3-r3:4.9.3 [-P-] [M ] sys-devel/gcc-4.9.4:4.9.4 [-P-] [ ] sys-devel/gcc-5.3.0-r1:5.3.0 [IP-] [ ] sys-devel/gcc-5.4.0:5.4.0 [-P-] [M ] sys-devel/gcc-6.3.0:6.3.0 [-P-] [M-] sys-devel/gcc-6.4.0:6.4.0 [-P-] [M-] sys-devel/gcc-7.2.0:7.2.0 Locke linux-4.14.16 # emerge -s gcc [ Results for search key : gcc ] Searching... ...entries deleted to show only... * sys-devel/gcc Latest version available: 5.4.0 Latest version installed: 5.4.0 Repository: core-kit Size of files: 97,103 KiB Homepage: Description: The GNU Compiler Collection License: GPL-3+ LGPL-3+ || ( GPL-3+ libgcc libstdc++ gcc-runtime-library-exception-3.1 ) FDL-1.3+ I suppose I could try linux-debian-sources, but if I am making a fundamental user error, I certainly need to correct my understanding. I would rather just get the kernel straight from the kernel people, which is essentially why I went from gentoo to funtoo. I suspect I don't competently understand the major changes, I'm sure good changes, made to use the new portage tree or update by kit granularity. From looking online, I think my kernel problem is a 'just me' problem. Maybe the solution will be obvious to someone else.
  19. I have the same problem. Did not update my world since X11 performance was degraded and switched to LXDE, which makes the refresh latency mostly bearable. So I have a lot of update distance to cover. I can 'ego sync' with no problem. I thought I would update portage first after seeing it scheduled for update when I tried to get latest kernel sources. I did lots of unmerging try to resolve block, and failed. Tried these two lines in package.mask: =dev-util/pkgconfig-0.29.2 and =dev-util/pkgconf-1.2.2 I have attached a file which shows blockers dev-util/pkgconf and dev-util/pkgconfig are not installed because I unmerged them, and I uninstall many applications as a guess. No luck. test.txt I am updating. I feel silly but all I did was change from: emerge -uNDa --with-bdeps=y portage ...to...: emerge -uNDa portage And if that didn't work, I was gonna drop the -D and try that. Tip: Show the command that was used to generate the output. The two are closely related.
  20. Hi, Tony. I didn't get very far in my experiments with Leechcraft. I can't only guess that you need escape nesting for the bash interpreter, something like "pcmanfm '%d'". I have found that studying the manpage for bash in detail for the basic bash command-line language is invaluable. Bash splits on spaces. If you make the sibling directories 'a', 'b', and 'a b' (a.k.a. a\ b if no containing quotes) and try for 'a b', I wonder if you would get a or a and b. Spaces are often trouble in bash scripts, at least for me. Our BDFL prefers Python. It's a great script language and then some.
  21. Hi, all. I tried LXDE in lieu of XFCE and it works great! I have no idea why that is, but maybe this documented experience will be useful to someone else.
  22. Any insights into what to try to fix the screen refresh or the lesser issues would be welcome. I am out of package masking ideas. I have no idea what to address. I have updated my kernel and then @world after months. World update was 243 packages. As a result, the desktop display is painfully slow, 2-5 seconds of delay is usual. Less critically, but if you have insights, I also notice that in firefox 53.0 the text I highlight in a url or search box shows no highlighting and the cursor disappears. That is in addition to the scrollbar on xfce-terminal being nearly invisible because of poor contrast for some time. Seems like poor contrast is contagious. Have Sony VAIO that has two GPUs. I have never been able to take advantage of that on Linux. Indeed, getting the xorg.conf to work was I nightmare because I need the both the 'intel' and 'radeon' drivers installed but I can only inform the Xserver about intel, for as long as I've used this laptop. Wondering if I have multi-GPU because of this Gentoo issue: "[sOLVED] Slow, lagging desktop GUI with AMDGPU-PRO" at https://forums.gentoo.org/viewtopic-p-8046212.html. I don't understand what got solved. (In funtoo forum from Oleg I see: https://github.com/Lucretia/vulkan-overlay/issues/32, but not the same issue , it seems.) I don't see my problem online, which concerns me. As part of my update I had replaced packages radeon-ucode and iwl6030-ucode with linux-firmware package. I tried going back to those original packages, did not change anything. I tried my previous (vanilla) kernel, did not change anything. I tried editing xorg.conf. No Xwindows came up when I tried xstart. I forced default config by renaming the xorg.conf file. Same refresh problem but with tiny resolution and big screen elements. I tried downgrading x11-base/xorg-server-1.19.1_p20170228:0/1.19.1_p20170228 to xorg-server-1.19.1 and 1.18.4. No change. I tried downgrading xfdesktop from 4.13.0 to 4.12.3. Same refresh problem. I did a fresh emerge --sync and got some updates about 24 hours later and that did not help. I could try mucking around with kernel configuration of memory I suppose. An alternative desktop? I am out of decent guesses. SOS. What part of the architecture do I care about? Not care about for this problem? Here is lspci: 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4) 00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b4) 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b4) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b4) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation HM67 Express Chipset Family LPC Controller (rev 04) 00:1f.2 RAID bus controller: Intel Corporation 82801 Mobile SATA Controller [RAID mode] (rev 04) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04) 01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Whistler [Radeon HD 6630M/6650M/6750M/7670M/7690M] 02:00.0 Network controller: Intel Corporation Centrino Advanced-N 6230 [Rainbow Peak] (rev 34) 03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card Reader (rev 01) 04:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04) 05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06) Here is epro: === Enabled Profiles: === arch: x86-64bit build: current subarch: intel64-sandybridge flavor: desktop mix-ins: xfce === All inherited flavors from desktop flavor: === workstation (from desktop flavor) core (from workstation flavor) minimal (from core flavor) === All inherited mix-ins from desktop flavor: === X (from workstation flavor) audio (from workstation flavor) dvd (from workstation flavor) media (from workstation flavor) mediadevice-audio-consumer (from media mix-in) mediadevice-base (from mediadevice-audio-consumer mix-in) mediadevice-video-consumer (from media mix-in) mediadevice-base (from mediadevice-video-consumer mix-in) mediaformat-audio-common (from media mix-in) mediaformat-gfx-common (from media mix-in) mediaformat-video-common (from media mix-in) console-extras (from workstation flavor) print (from desktop flavor) Here is Xorg.0.log from /var/log: [ 960.827] X.Org X Server 1.19.1 Release Date: 2017-01-11 [ 960.832] X Protocol Version 11, Revision 0 [ 960.833] Build Operating System: Linux 4.11.3 x86_64 Gentoo [ 960.835] Current Operating System: Linux Locke 4.11.3 #1 SMP Fri May 26 18:17:11 EDT 2017 x86_64 [ 960.835] Kernel command line: BOOT_IMAGE=/kernel-genkernel-x86_64-4.11.3 dolvm video=854x480 rootfstype=ext4 real_root=/dev/mapper/volgrp-fsroot rootfstype=ext4 [ 960.839] Build Date: 27 May 2017 07:52:47PM [ 960.841] [ 960.842] Current version of pixman: 0.34.0 [ 960.845] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 960.845] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 960.851] (==) Log file: "/var/log/Xorg.0.log", Time: Sat May 27 22:19:34 2017 [ 960.853] (==) Using config file: "/etc/X11/xorg.conf" [ 960.854] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 960.856] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 960.856] (==) ServerLayout "Default Layout" [ 960.856] (**) |-->Screen "Laptop Screen" (0) [ 960.856] (**) | |-->Monitor "LVDS Output" [ 960.856] (**) | |-->Device "Intel" [ 960.856] (**) | |-->GPUDevice "Radeon" [ 960.856] (**) |-->Input Device "Mouse0" [ 960.856] (**) Option "DRI2" "on" [ 960.856] (==) Automatically adding devices [ 960.856] (==) Automatically enabling devices [ 960.856] (==) Automatically adding GPU devices [ 960.856] (==) Max clients allowed: 256, resource mask: 0x1fffff [ 960.856] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/misc/". [ 960.856] Entry deleted from font path. [ 960.856] (Run 'mkfontdir' on "/usr/share/fonts/misc/"). [ 960.856] (WW) The directory "/usr/share/fonts/OTF/" does not exist. [ 960.856] Entry deleted from font path. [ 960.856] (WW) The directory "/usr/share/fonts/Type1/" does not exist. [ 960.856] Entry deleted from font path. [ 960.856] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/". [ 960.856] Entry deleted from font path. [ 960.856] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/"). [ 960.856] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/". [ 960.856] Entry deleted from font path. [ 960.856] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/"). [ 960.856] (==) FontPath set to: /usr/share/fonts/TTF/ [ 960.856] (==) ModulePath set to "/usr/lib64/xorg/modules" [ 960.856] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 960.856] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled. [ 960.856] (WW) Disabling Mouse0 [ 960.856] (II) Loader magic: 0x807760 [ 960.856] (II) Module ABI versions: [ 960.856] X.Org ANSI C Emulation: 0.4 [ 960.856] X.Org Video Driver: 23.0 [ 960.856] X.Org XInput driver : 24.1 [ 960.856] X.Org Server Extension : 10.0 [ 960.857] (II) xfree86: Adding drm device (/dev/dri/card1) [ 960.857] (II) xfree86: Adding drm device (/dev/dri/card0) [ 960.868] (--) PCI:*(0:0:2:0) 8086:0116:104d:907b rev 9, Mem @ 0xc0000000/4194304, 0xb0000000/268435456, I/O @ 0x00008000/64, BIOS @ 0x????????/131072 [ 960.868] (--) PCI: (0:1:0:0) 1002:6741:104d:907b rev 0, Mem @ 0xa0000000/268435456, 0xc8400000/131072, I/O @ 0x00007000/256, BIOS @ 0x????????/131072 [ 960.868] (II) "glx" will be loaded. This was enabled by default and also specified in the config file. [ 960.868] (II) LoadModule: "dbe" [ 960.869] (II) Module "dbe" already built-in [ 960.869] (II) LoadModule: "dri" [ 960.869] (II) Module "dri" already built-in [ 960.869] (II) LoadModule: "dri2" [ 960.869] (II) Module "dri2" already built-in [ 960.869] (II) LoadModule: "extmod" [ 960.869] (II) Module "extmod" already built-in [ 960.869] (II) LoadModule: "glx" [ 960.869] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so [ 960.870] (II) Module glx: vendor="X.Org Foundation" [ 960.870] compiled for 1.19.1, module version = 1.0.0 [ 960.870] ABI class: X.Org Server Extension, version 10.0 [ 960.870] (II) LoadModule: "record" [ 960.870] (II) Module "record" already built-in [ 960.870] (II) LoadModule: "radeon" [ 960.870] (II) Loading /usr/lib64/xorg/modules/drivers/radeon_drv.so [ 960.871] (II) Module radeon: vendor="X.Org Foundation" [ 960.871] compiled for 1.19.1, module version = 7.8.0 [ 960.871] Module class: X.Org Video Driver [ 960.871] ABI class: X.Org Video Driver, version 23.0 [ 960.871] (II) LoadModule: "intel" [ 960.871] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so [ 960.871] (II) Module intel: vendor="X.Org Foundation" [ 960.871] compiled for 1.19.1, module version = 2.99.917 [ 960.871] Module class: X.Org Video Driver [ 960.871] ABI class: X.Org Video Driver, version 23.0 [ 960.871] (II) LoadModule: "radeon" [ 960.871] (II) Loading /usr/lib64/xorg/modules/drivers/radeon_drv.so [ 960.871] (II) Module radeon: vendor="X.Org Foundation" [ 960.871] compiled for 1.19.1, module version = 7.8.0 [ 960.871] Module class: X.Org Video Driver [ 960.871] ABI class: X.Org Video Driver, version 23.0 [ 960.871] (II) RADEON: Driver for ATI/AMD Radeon chipsets: ATI Radeon Mobility X600 (M24), ATI FireMV 2400, ATI Radeon Mobility X300 (M24), ATI FireGL M24 GL, ATI Radeon X600 (RV380), ATI FireGL V3200 (RV380), ATI Radeon IGP320 (A3), ATI Radeon IGP330/340/350 (A4), ATI Radeon 9500, ATI Radeon 9600TX, ATI FireGL Z1, ATI Radeon 9800SE, ATI Radeon 9800, ATI FireGL X2, ATI Radeon 9600, ATI Radeon 9600SE, ATI Radeon 9600XT, ATI FireGL T2, ATI Radeon 9650, ATI FireGL RV360, ATI Radeon 7000 IGP (A4+), ATI Radeon 8500 AIW, ATI Radeon IGP320M (U1), ATI Radeon IGP330M/340M/350M (U2), ATI Radeon Mobility 7000 IGP, ATI Radeon 9000/PRO, ATI Radeon 9000, ATI Radeon X800 (R420), ATI Radeon X800PRO (R420), ATI Radeon X800SE (R420), ATI FireGL X3 (R420), ATI Radeon Mobility 9800 (M18), ATI Radeon X800 SE (R420), ATI Radeon X800XT (R420), ATI Radeon X800 VE (R420), ATI Radeon X850 (R480), ATI Radeon X850 XT (R480), ATI Radeon X850 SE (R480), ATI Radeon X850 PRO (R480), ATI Radeon X850 XT PE (R480), ATI Radeon Mobility M7, ATI Mobility FireGL 7800 M7, ATI Radeon Mobility M6, ATI FireGL Mobility 9000 (M9), ATI Radeon Mobility 9000 (M9), ATI Radeon 9700 Pro, ATI Radeon 9700/9500Pro, ATI FireGL X1, ATI Radeon 9800PRO, ATI Radeon 9800XT, ATI Radeon Mobility 9600/9700 (M10/M11), ATI Radeon Mobility 9600 (M10), ATI Radeon Mobility 9600 (M11), ATI FireGL Mobility T2 (M10), ATI FireGL Mobility T2e (M11), ATI Radeon, ATI FireGL 8700/8800, ATI Radeon 8500, ATI Radeon 9100, ATI Radeon 7500, ATI Radeon VE/7000, ATI ES1000, ATI Radeon Mobility X300 (M22), ATI Radeon Mobility X600 SE (M24C), ATI FireGL M22 GL, ATI Radeon X800 (R423), ATI Radeon X800PRO (R423), ATI Radeon X800LE (R423), ATI Radeon X800SE (R423), ATI Radeon X800 XTP (R430), ATI Radeon X800 XL (R430), ATI Radeon X800 SE (R430), ATI Radeon X800 (R430), ATI FireGL V7100 (R423), ATI FireGL V5100 (R423), ATI FireGL unknown (R423), ATI Mobility FireGL V5000 (M26), ATI Mobility Radeon X700 XL (M26), ATI Mobility Radeon X700 (M26), ATI Radeon X550XTX, ATI Radeon 9100 IGP (A5), ATI Radeon Mobility 9100 IGP (U3), ATI Radeon XPRESS 200, ATI Radeon XPRESS 200M, ATI Radeon 9250, ATI Radeon 9200, ATI Radeon 9200SE, ATI FireMV 2200, ATI Radeon X300 (RV370), ATI Radeon X600 (RV370), ATI Radeon X550 (RV370), ATI FireGL V3100 (RV370), ATI FireMV 2200 PCIE (RV370), ATI Radeon Mobility 9200 (M9+), ATI Mobility Radeon X800 XT (M28), ATI Mobility FireGL V5100 (M28), ATI Mobility Radeon X800 (M28), ATI Radeon X850, ATI unknown Radeon / FireGL (R480), ATI Radeon X800XT (R423), ATI FireGL V5000 (RV410), ATI Radeon X700 XT (RV410), ATI Radeon X700 PRO (RV410), ATI Radeon X700 SE (RV410), ATI Radeon X700 (RV410), ATI Radeon X1800, ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800, ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300, ATI Mobility FireGL V7100, ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505, ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL, ATI Mobility Radeon X1400, ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300, ATI Radeon X1300, ATI FireGL V3300, ATI FireGL V3350, ATI Mobility Radeon X1450, ATI Mobility Radeon X2300, ATI Mobility Radeon X1350, ATI FireMV 2250, ATI Radeon X1650, ATI Mobility FireGL V5200, ATI Mobility Radeon X1600, ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400, ATI Mobility FireGL V5250, ATI Mobility Radeon X1700, ATI Mobility Radeon X1700 XT, ATI FireGL V5200, ATI Radeon X2300HD, ATI Mobility Radeon HD 2300, ATI Radeon X1950, ATI Radeon X1900, ATI AMD Stream Processor, ATI RV560, ATI Mobility Radeon X1900, ATI Radeon X1950 GT, ATI RV570, ATI FireGL V7400, ATI Radeon 9100 PRO IGP, ATI Radeon Mobility 9200 IGP, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT, ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600, ATI Radeon 4800 Series, ATI Radeon HD 4870 x2, ATI Radeon HD 4850 x2, ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL), ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2, ATI FirePro RV770, AMD FireStream 9270, AMD FireStream 9250, ATI FirePro V8700 (FireGL), ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98, ATI FirePro M7750, ATI M98, ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670, ATI FirePro M5750, ATI RV730XT [Radeon HD 4670], ATI RADEON E4600, ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650], ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL), ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830, ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740, ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI RV610, ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT, ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI FireMV 2260, ATI RV670, ATI Radeon HD3870, ATI Mobility Radeon HD 3850, ATI Radeon HD3850, ATI Mobility Radeon HD 3850 X2, ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2, ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550, ATI Radeon RV710, ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series, ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630, ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT, ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP, ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630, ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600, ATI FireGL V3600, ATI Radeon HD 2600 LE, ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470, ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450, ATI Radeon HD 3430, ATI FirePro V3700, ATI FireMV 2450, ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT, ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700, ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics, ATI Radeon 3000 Graphics, SUMO, SUMO2, ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200, ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250, AMD Radeon HD 6310 Graphics, AMD Radeon HD 6250 Graphics, AMD Radeon HD 6300 Series Graphics, AMD Radeon HD 6200 Series Graphics, PALM, CYPRESS, ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370, AMD Firestream 9350, ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series, ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570, ATI Radeon HD 5670, ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD, ATI Mobility Radeon Graphics, CEDAR, ATI FirePro 2270, ATI Radeon HD 5450, CAYMAN, AMD Radeon HD 6900 Series, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series, BARTS, AMD Radeon HD 6800 Series, AMD Radeon HD 6700 Series, TURKS, CAICOS, ARUBA, TAHITI, PITCAIRN, VERDE, OLAND, HAINAN, BONAIRE, KABINI, MULLINS, KAVERI, HAWAII [ 960.873] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43 [ 960.873] (II) intel: Driver for Intel(R) HD Graphics [ 960.873] (II) intel: Driver for Intel(R) Iris(TM) Graphics [ 960.873] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics [ 960.873] (--) using VT number 7 [ 960.886] (II) [KMS] Kernel modesetting enabled. [ 960.886] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20170123 [ 960.887] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 3000 [ 960.887] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx; using a maximum of 2 threads [ 960.887] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 960.887] (==) intel(0): RGB weight 888 [ 960.887] (==) intel(0): Default visual is TrueColor [ 960.887] (II) intel(0): Output LVDS1 using monitor section LVDS Output [ 960.887] (**) intel(0): Option "PreferredMode" "my1600x900" [ 960.887] (**) intel(0): Option "DefaultModes" "off" [ 960.950] (**) intel(0): Found backlight control interface intel_backlight (type 'raw') for output LVDS1 [ 960.950] (II) intel(0): Enabled output LVDS1 [ 960.950] (II) intel(0): Output VGA1 has no monitor section [ 960.950] (II) intel(0): Enabled output VGA1 [ 960.950] (II) intel(0): Output HDMI1 has no monitor section [ 960.950] (II) intel(0): Enabled output HDMI1 [ 960.950] (II) intel(0): Output DP1 has no monitor section [ 960.950] (II) intel(0): Enabled output DP1 [ 960.950] (II) intel(0): Output HDMI2 has no monitor section [ 960.950] (II) intel(0): Enabled output HDMI2 [ 960.950] (II) intel(0): Output DP2 has no monitor section [ 960.950] (II) intel(0): Enabled output DP2 [ 960.950] (--) intel(0): Using a maximum size of 256x256 for hardware cursors [ 960.950] (II) intel(0): Output VIRTUAL1 has no monitor section [ 960.950] (II) intel(0): Enabled output VIRTUAL1 [ 960.951] (II) intel(0): EDID for output LVDS1 [ 960.951] (II) intel(0): Printing probed modes for output LVDS1 [ 960.951] (II) intel(0): Modeline "my1600x900"x59.9 118.25 1600 1696 1856 2112 900 903 908 934 -hsync +vsync (56.0 kHz UP) [ 960.951] (II) intel(0): Modeline "1920x1080"x60.0 144.20 1920 1968 2040 2116 1080 1083 1088 1137 -hsync -vsync (68.1 kHz P) [ 960.951] (II) intel(0): Modeline "my1368x768"x59.9 85.25 1368 1440 1576 1784 768 771 781 798 -hsync +vsync (47.8 kHz) [ 960.951] (II) intel(0): Modeline "my1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz) [ 960.951] (II) intel(0): Modeline "856x480"x60.0 31.75 856 872 960 1064 480 481 484 497 -hsync +vsync (29.8 kHz) [ 960.951] (II) intel(0): EDID for output DP1 [ 960.951] (II) intel(0): EDID for output DP2 [ 960.959] (II) intel(0): EDID for output HDMI1 [ 960.967] (II) intel(0): EDID for output HDMI2 [ 960.972] (II) intel(0): EDID for output VGA1 [ 960.972] (II) intel(0): EDID for output VIRTUAL1 [ 960.972] (II) intel(0): Output LVDS1 connected [ 960.972] (II) intel(0): Output DP1 disconnected [ 960.972] (II) intel(0): Output DP2 disconnected [ 960.973] (II) intel(0): Output HDMI1 disconnected [ 960.973] (II) intel(0): Output HDMI2 disconnected [ 960.973] (II) intel(0): Output VGA1 disconnected [ 960.973] (II) intel(0): Output VIRTUAL1 disconnected [ 960.973] (II) intel(0): Using user preference for initial modes [ 960.973] (II) intel(0): Output LVDS1 using initial mode my1600x900 +0+0 [ 960.973] (==) intel(0): TearFree disabled [ 960.973] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0) [ 960.973] (==) intel(0): DPI set to (96, 96) [ 960.973] (II) Loading sub module "dri3" [ 960.973] (II) LoadModule: "dri3" [ 960.973] (II) Module "dri3" already built-in [ 960.973] (II) Loading sub module "dri2" [ 960.973] (II) LoadModule: "dri2" [ 960.973] (II) Module "dri2" already built-in [ 960.973] (II) Loading sub module "present" [ 960.973] (II) LoadModule: "present" [ 960.973] (II) Module "present" already built-in [ 960.973] (==) RADEON(G0): Depth 24, (--) framebuffer bpp 32 [ 960.973] (II) RADEON(G0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps) [ 960.973] (==) RADEON(G0): Default visual is TrueColor [ 960.973] (==) RADEON(G0): RGB weight 888 [ 960.973] (II) RADEON(G0): Using 8 bits per RGB (8 bit DAC) [ 960.973] (--) RADEON(G0): Chipset: "TURKS" (ChipID = 0x6741) [ 960.973] (II) Loading sub module "fb" [ 960.973] (II) LoadModule: "fb" [ 960.973] (II) Loading /usr/lib64/xorg/modules/libfb.so [ 960.974] (II) Module fb: vendor="X.Org Foundation" [ 960.974] compiled for 1.19.1, module version = 1.0.0 [ 960.974] ABI class: X.Org ANSI C Emulation, version 0.4 [ 960.974] (II) Loading sub module "dri2" [ 960.974] (II) LoadModule: "dri2" [ 960.974] (II) Module "dri2" already built-in [ 960.974] (II) Loading sub module "exa" [ 960.974] (II) LoadModule: "exa" [ 960.974] (II) Loading /usr/lib64/xorg/modules/libexa.so [ 960.974] (II) Module exa: vendor="X.Org Foundation" [ 960.974] compiled for 1.19.1, module version = 2.6.0 [ 960.974] ABI class: X.Org Video Driver, version 23.0 [ 960.974] (II) RADEON(G0): KMS Color Tiling: enabled [ 960.974] (II) RADEON(G0): KMS Color Tiling 2D: enabled [ 960.974] (II) RADEON(G0): KMS Pageflipping: enabled [ 960.974] (II) RADEON(G0): SwapBuffers wait for vsync: enabled [ 960.974] (**) RADEON(G0): Option "ModeDebug" "on" [ 960.974] (II) RADEON(G0): mem size init: gart size :3fdde000 vram size: s:40000000 visible:fc9d000 [ 960.974] (II) RADEON(G0): EXA: Driver will allow EXA pixmaps in VRAM [ 960.974] (==) RADEON(G0): DPI set to (96, 96) [ 960.974] (==) RADEON(G0): Using gamma correction (1.0, 1.0, 1.0) [ 960.974] (II) Loading sub module "ramdac" [ 960.974] (II) LoadModule: "ramdac" [ 960.974] (II) Module "ramdac" already built-in [ 960.974] (==) Depth 24 pixmap format is 32 bpp [ 960.974] (II) RADEON(G0): [DRI2] Setup complete [ 960.974] (II) RADEON(G0): [DRI2] DRI driver: r600 [ 960.974] (II) RADEON(G0): [DRI2] VDPAU driver: r600 [ 960.974] (II) RADEON(G0): Front buffer size: 3072K [ 960.974] (II) RADEON(G0): VRAM usage limit set to 229957K [ 960.975] (==) RADEON(G0): DRI3 disabled [ 960.975] (==) RADEON(G0): Backing store enabled [ 960.975] (II) RADEON(G0): Direct rendering enabled [ 960.975] (II) EXA(256): Driver allocated offscreen pixmaps [ 960.975] (II) EXA(256): Driver registered support for the following operations: [ 960.975] (II) Solid [ 960.975] (II) Copy [ 960.975] (II) Composite (RENDER acceleration) [ 960.975] (II) UploadToScreen [ 960.975] (II) DownloadFromScreen [ 960.975] (II) RADEON(G0): Acceleration enabled [ 960.975] (==) RADEON(G0): DPMS enabled [ 960.975] (==) RADEON(G0): Silken mouse enabled [ 960.975] (II) RADEON(G0): Set up textured video [ 960.975] (II) RADEON(G0): [XvMC] Associated with Radeon Textured Video. [ 960.975] (II) RADEON(G0): [XvMC] Extension initialized. [ 960.975] (II) RADEON(G0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 960.975] (WW) RADEON(G0): Option "Monitor-LVDS1" is not used [ 960.975] (WW) RADEON(G0): Option "DefaultModes" is not used [ 960.975] (WW) RADEON(G0): Option "IgnoreEDID" is not used [ 960.975] (II) intel(0): SNA initialized with Sandybridge (gen6, gt2) backend [ 960.975] (==) intel(0): Backing store enabled [ 960.975] (==) intel(0): Silken mouse enabled [ 960.975] (II) intel(0): HW Cursor enabled [ 960.975] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 960.975] (==) intel(0): DPMS enabled [ 960.975] (==) intel(0): Display hotplug detection enabled [ 960.975] (II) intel(0): [DRI2] Setup complete [ 960.975] (II) intel(0): [DRI2] DRI driver: i965 [ 960.975] (II) intel(0): [DRI2] VDPAU driver: va_gl [ 960.975] (II) intel(0): direct rendering: DRI2 enabled [ 960.975] (II) intel(0): hardware support for Present enabled [ 960.975] (WW) intel(0): Option "PreferredMode" is not used [ 960.975] (WW) intel(0): Option "DefaultModes" is not used [ 960.975] (WW) intel(0): Option "IgnoreEDID" is not used [ 960.975] (--) RandR disabled [ 960.989] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 960.989] (II) AIGLX: enabled GLX_ARB_create_context [ 960.989] (II) AIGLX: enabled GLX_ARB_create_context_profile [ 960.989] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile [ 960.989] (II) AIGLX: enabled GLX_INTEL_swap_event [ 960.989] (II) AIGLX: enabled GLX_SGI_swap_control [ 960.989] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB [ 960.989] (II) AIGLX: enabled GLX_ARB_fbconfig_float [ 960.989] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float [ 960.990] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 960.990] (II) AIGLX: enabled GLX_ARB_create_context_robustness [ 960.990] (II) AIGLX: Loaded and initialized i965 [ 960.990] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 960.992] (II) intel(0): switch to mode 1600x900@59.9 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none [ 961.000] (II) intel(0): Setting screen physical size to 423 x 238 [ 961.000] (II) intel(0): resizing framebuffer to 1600x900 [ 961.020] (II) config/udev: Adding input device Video Bus (/dev/input/event8) [ 961.020] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 961.020] (II) LoadModule: "evdev" [ 961.020] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so [ 961.021] (II) Module evdev: vendor="X.Org Foundation" [ 961.021] compiled for 1.19.1, module version = 2.10.5 [ 961.021] Module class: X.Org XInput Driver [ 961.021] ABI class: X.Org XInput driver, version 24.1 [ 961.021] (II) Using input driver 'evdev' for 'Video Bus' [ 961.021] (**) Video Bus: always reports core events [ 961.021] (**) evdev: Video Bus: Device: "/dev/input/event8" [ 961.021] (--) evdev: Video Bus: Vendor 0 Product 0x6 [ 961.021] (--) evdev: Video Bus: Found keys [ 961.021] (II) evdev: Video Bus: Configuring as keyboard [ 961.021] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:09/input/input9/event8" [ 961.021] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6) [ 961.021] (**) Option "xkb_rules" "evdev" [ 961.021] (II) config/udev: Adding input device Sony Vaio Keys (/dev/input/event4) [ 961.021] (**) Sony Vaio Keys: Applying InputClass "evdev keyboard catchall" [ 961.021] (II) Using input driver 'evdev' for 'Sony Vaio Keys' [ 961.021] (**) Sony Vaio Keys: always reports core events [ 961.021] (**) evdev: Sony Vaio Keys: Device: "/dev/input/event4" [ 961.021] (--) evdev: Sony Vaio Keys: Vendor 0x104d Product 0 [ 961.021] (--) evdev: Sony Vaio Keys: Found keys [ 961.021] (II) evdev: Sony Vaio Keys: Configuring as keyboard [ 961.021] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/SNY5001:00/input/input5/event4" [ 961.021] (II) XINPUT: Adding extended input device "Sony Vaio Keys" (type: KEYBOARD, id 7) [ 961.021] (**) Option "xkb_rules" "evdev" [ 961.022] (II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/event5) [ 961.022] (**) Sony Vaio Jogdial: Applying InputClass "evdev keyboard catchall" [ 961.022] (II) Using input driver 'evdev' for 'Sony Vaio Jogdial' [ 961.022] (**) Sony Vaio Jogdial: always reports core events [ 961.022] (**) evdev: Sony Vaio Jogdial: Device: "/dev/input/event5" [ 961.022] (--) evdev: Sony Vaio Jogdial: Vendor 0x104d Product 0 [ 961.022] (--) evdev: Sony Vaio Jogdial: Found 2 mouse buttons [ 961.022] (--) evdev: Sony Vaio Jogdial: Found scroll wheel(s) [ 961.022] (--) evdev: Sony Vaio Jogdial: Found relative axes [ 961.022] (II) evdev: Sony Vaio Jogdial: Forcing relative x/y axes to exist. [ 961.022] (II) evdev: Sony Vaio Jogdial: Configuring as mouse [ 961.022] (II) evdev: Sony Vaio Jogdial: Adding scrollwheel support [ 961.022] (**) evdev: Sony Vaio Jogdial: YAxisMapping: buttons 4 and 5 [ 961.022] (**) evdev: Sony Vaio Jogdial: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 961.022] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/SNY5001:00/input/input6/event5" [ 961.022] (II) XINPUT: Adding extended input device "Sony Vaio Jogdial" (type: MOUSE, id 8) [ 961.022] (II) evdev: Sony Vaio Jogdial: initialized for relative axes. [ 961.022] (**) Sony Vaio Jogdial: (accel) keeping acceleration scheme 1 [ 961.022] (**) Sony Vaio Jogdial: (accel) acceleration profile 0 [ 961.022] (**) Sony Vaio Jogdial: (accel) acceleration factor: 2.000 [ 961.022] (**) Sony Vaio Jogdial: (accel) acceleration threshold: 4 [ 961.022] (II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/mouse1) [ 961.022] (II) No input driver specified, ignoring this device. [ 961.022] (II) This device may have been added with another device file. [ 961.022] (II) config/udev: Adding input device Video Bus (/dev/input/event7) [ 961.022] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 961.022] (II) Using input driver 'evdev' for 'Video Bus' [ 961.022] (**) Video Bus: always reports core events [ 961.022] (**) evdev: Video Bus: Device: "/dev/input/event7" [ 961.022] (--) evdev: Video Bus: Vendor 0 Product 0x6 [ 961.022] (--) evdev: Video Bus: Found keys [ 961.022] (II) evdev: Video Bus: Configuring as keyboard [ 961.022] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:26/LNXVIDEO:00/input/input8/event7" [ 961.022] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 9) [ 961.022] (**) Option "xkb_rules" "evdev" [ 961.023] (II) config/udev: Adding input device Power Button (/dev/input/event3) [ 961.023] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 961.023] (II) Using input driver 'evdev' for 'Power Button' [ 961.023] (**) Power Button: always reports core events [ 961.023] (**) evdev: Power Button: Device: "/dev/input/event3" [ 961.023] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 961.023] (--) evdev: Power Button: Found keys [ 961.023] (II) evdev: Power Button: Configuring as keyboard [ 961.023] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4/event3" [ 961.023] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 10) [ 961.023] (**) Option "xkb_rules" "evdev" [ 961.023] (II) config/udev: Adding input device Lid Switch (/dev/input/event2) [ 961.023] (II) No input driver specified, ignoring this device. [ 961.023] (II) This device may have been added with another device file. [ 961.024] (II) config/udev: Adding input device USB2.0 Camera (/dev/input/event14) [ 961.024] (**) USB2.0 Camera: Applying InputClass "evdev keyboard catchall" [ 961.024] (II) Using input driver 'evdev' for 'USB2.0 Camera' [ 961.024] (**) USB2.0 Camera: always reports core events [ 961.024] (**) evdev: USB2.0 Camera: Device: "/dev/input/event14" [ 961.024] (--) evdev: USB2.0 Camera: Vendor 0x5ca Product 0x18c0 [ 961.024] (--) evdev: USB2.0 Camera: Found keys [ 961.024] (II) evdev: USB2.0 Camera: Configuring as keyboard [ 961.024] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input15/event14" [ 961.024] (II) XINPUT: Adding extended input device "USB2.0 Camera" (type: KEYBOARD, id 11) [ 961.024] (**) Option "xkb_rules" "evdev" [ 961.024] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event11) [ 961.024] (II) No input driver specified, ignoring this device. [ 961.024] (II) This device may have been added with another device file. [ 961.024] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event12) [ 961.024] (II) No input driver specified, ignoring this device. [ 961.024] (II) This device may have been added with another device file. [ 961.024] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event13) [ 961.024] (II) No input driver specified, ignoring this device. [ 961.024] (II) This device may have been added with another device file. [ 961.025] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event9) [ 961.025] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall" [ 961.025] (II) Using input driver 'evdev' for 'Logitech USB Receiver' [ 961.025] (**) Logitech USB Receiver: always reports core events [ 961.025] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event9" [ 961.090] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f [ 961.090] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons [ 961.090] (--) evdev: Logitech USB Receiver: Found scroll wheel(s) [ 961.090] (--) evdev: Logitech USB Receiver: Found relative axes [ 961.090] (--) evdev: Logitech USB Receiver: Found x and y relative axes [ 961.090] (II) evdev: Logitech USB Receiver: Configuring as mouse [ 961.090] (II) evdev: Logitech USB Receiver: Adding scrollwheel support [ 961.090] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5 [ 961.090] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 961.090] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/0003:046D:C52F.0001/input/input11/event9" [ 961.090] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 12) [ 961.090] (II) evdev: Logitech USB Receiver: initialized for relative axes. [ 961.090] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1 [ 961.090] (**) Logitech USB Receiver: (accel) acceleration profile 0 [ 961.090] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000 [ 961.090] (**) Logitech USB Receiver: (accel) acceleration threshold: 4 [ 961.090] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse2) [ 961.090] (II) No input driver specified, ignoring this device. [ 961.090] (II) This device may have been added with another device file. [ 961.091] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event10) [ 961.091] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall" [ 961.091] (II) Using input driver 'evdev' for 'Logitech USB Receiver' [ 961.091] (**) Logitech USB Receiver: always reports core events [ 961.091] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event10" [ 961.091] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f [ 961.091] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons [ 961.091] (--) evdev: Logitech USB Receiver: Found scroll wheel(s) [ 961.091] (--) evdev: Logitech USB Receiver: Found relative axes [ 961.091] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist. [ 961.091] (--) evdev: Logitech USB Receiver: Found absolute axes [ 961.091] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist. [ 961.091] (--) evdev: Logitech USB Receiver: Found keys [ 961.091] (II) evdev: Logitech USB Receiver: Configuring as mouse [ 961.091] (II) evdev: Logitech USB Receiver: Configuring as keyboard [ 961.091] (II) evdev: Logitech USB Receiver: Adding scrollwheel support [ 961.091] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5 [ 961.091] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 961.091] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1/0003:046D:C52F.0002/input/input12/event10" [ 961.091] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 13) [ 961.091] (**) Option "xkb_rules" "evdev" [ 961.091] (II) evdev: Logitech USB Receiver: initialized for relative axes. [ 961.091] (WW) evdev: Logitech USB Receiver: ignoring absolute axes. [ 961.091] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1 [ 961.091] (**) Logitech USB Receiver: (accel) acceleration profile 0 [ 961.091] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000 [ 961.091] (**) Logitech USB Receiver: (accel) acceleration threshold: 4 [ 961.091] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0) [ 961.091] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 961.091] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 961.091] (**) AT Translated Set 2 keyboard: always reports core events [ 961.091] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0" [ 961.091] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1 [ 961.091] (--) evdev: AT Translated Set 2 keyboard: Found keys [ 961.091] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard [ 961.091] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0" [ 961.091] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14) [ 961.091] (**) Option "xkb_rules" "evdev" [ 961.092] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event1) [ 961.092] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall" [ 961.092] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall" [ 961.092] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons" [ 961.092] (II) LoadModule: "synaptics" [ 961.092] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so [ 961.092] (II) Module synaptics: vendor="X.Org Foundation" [ 961.092] compiled for 1.19.1, module version = 1.9.0 [ 961.092] Module class: X.Org XInput Driver [ 961.092] ABI class: X.Org XInput driver, version 24.1 [ 961.092] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad' [ 961.092] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 961.092] (**) Option "Device" "/dev/input/event1" [ 961.190] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device [ 961.190] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5508 (res 47) [ 961.190] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4550 (res 70) [ 961.190] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255 [ 961.190] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15 [ 961.190] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple [ 961.190] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7 [ 961.190] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found [ 961.190] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 961.270] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event1" [ 961.270] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 15) [ 961.270] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5 [ 961.270] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75 [ 961.270] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.039 [ 961.270] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1 [ 961.270] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1 [ 961.270] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000 [ 961.270] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4 [ 961.270] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found [ 961.270] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0) [ 961.270] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates" [ 961.270] (II) config/udev: Adding input device PC Speaker (/dev/input/event6) [ 961.270] (II) No input driver specified, ignoring this device. [ 961.270] (II) This device may have been added with another device file. [ 1826.450] (II) AIGLX: Suspending AIGLX clients for VT switch [ 1838.105] (II) AIGLX: Resuming AIGLX clients after VT switch [ 1838.106] (II) intel(0): switch to mode 1600x900@59.9 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none [ 1839.180] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found [ 3685.730] (II) AIGLX: Suspending AIGLX clients for VT switch [ 3694.187] (II) AIGLX: Resuming AIGLX clients after VT switch [ 3694.187] (II) intel(0): switch to mode 1600x900@59.9 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none [ 3695.310] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
  23. I don't have experience posting on reddit, just reading the occasional post. Riddle me this: Is there spam at the funtoo reddit? I'm looking at you, "M? r?al story ?b?ut s?x d?ting sit?", and "M? real ??p?rien?? with girl for ?ou guys". I understand about wanting to grow the Funtoo user base. Jenny, I might not be smart man, but I know who the linux distro genius is. I will just go with whatever BDFL decides. And if there is a floss get-hot-chicks package, I will add it to my @world asap.
  24. When my laptop was new I tried Funtoo, Gentoo,and Debian. Nothing worked. It was three months later that I could get the drivers, but I didn't know that and flailed quite a bit, all pointlessly. As I recall, I downloaded a new sys-apps/hwids and then I was able to get things to work. I also spent about 2 weeks to craft a functional xorg.conf configuration file to get X windows to work. Probably you know more than me, but I read your post.
  25. Can't emerge electron-1.3.6, necessary for app-editors/atom. I have enough disk space and memory. I've tried downgrading jinja (per online, maybe not relevant), revdep-rebuild, updating everything in @world that will, emerge @preserved-rebuild. The two ninjas I have are: Computer me # equery l -po dev-util/ninja net-irc/ninja * Searching for ninja in dev-util ... [-P-] [ ] dev-util/ninja-1.6.0:0 [-P-] [ ] dev-util/ninja-1.7.1:0 [IP-] [ ] dev-util/ninja-1.7.2:0 [-P-] [ -] dev-util/ninja-9999:0 * Searching for ninja in net-irc ... [-P-] [ ] net-irc/ninja-1.5.9_pre14-r1:0 Computer me # This is the emerge output for the electron-1-3.6 failure, always the same: ninja: build stopped: subcommand failed. * ERROR: dev-util/electron-1.3.6::gentoo failed (compile phase): * (no error message) * * Call stack: * ebuild.sh, line 115: Called src_compile * environment, line 5142: Called die * The specific snippet of code: * eninja -C ${compile_target} ${ninja_targets} || die * * If you need support, post the output of `emerge --info '=dev-util/electron-1.3.6::gentoo'`, * the complete build log and the output of `emerge -pqv '=dev-util/electron-1.3.6::gentoo'`. * * MemTotal: 3947876 kB * SwapTotal: 2097148 kB * * The complete build log is located at '/var/tmp/portage/dev-util/electron-1.3.6/temp/build.log'. * The ebuild environment file is located at '/var/tmp/portage/dev-util/electron-1.3.6/temp/environment'. * Working directory: '/var/tmp/portage/dev-util/electron-1.3.6/work/chromium-52.0.2743.82' * S: '/var/tmp/portage/dev-util/electron-1.3.6/work/chromium-52.0.2743.82' >>> Failed to emerge dev-util/electron-1.3.6, Log file: >>> '/var/tmp/portage/dev-util/electron-1.3.6/temp/build.log' * Messages for package dev-util/electron-1.3.6: * ERROR: dev-util/electron-1.3.6::gentoo failed (compile phase): * (no error message) * * Call stack: * ebuild.sh, line 115: Called src_compile * environment, line 5142: Called die * The specific snippet of code: * eninja -C ${compile_target} ${ninja_targets} || die * * If you need support, post the output of `emerge --info '=dev-util/electron-1.3.6::gentoo'`, * the complete build log and the output of `emerge -pqv '=dev-util/electron-1.3.6::gentoo'`. * The complete build log is located at '/var/tmp/portage/dev-util/electron-1.3.6/temp/build.log'. * The ebuild environment file is located at '/var/tmp/portage/dev-util/electron-1.3.6/temp/environment'. * Working directory: '/var/tmp/portage/dev-util/electron-1.3.6/work/chromium-52.0.2743.82' * S: '/var/tmp/portage/dev-util/electron-1.3.6/work/chromium-52.0.2743.82' Computer me # My emerge @preserved-rebuild only tries to emerge cups-filters, and fails: make: *** [all] Error 2 * ERROR: net-print/cups-filters-1.13.2::gentoo failed (compile phase): * emake failed * * If you need support, post the output of `emerge --info '=net-print/cups-filters-1.13.2::gentoo'`, * the complete build log and the output of `emerge -pqv '=net-print/cups-filters-1.13.2::gentoo'`. * The complete build log is located at '/var/tmp/portage/net-print/cups-filters-1.13.2/temp/build.log'. * The ebuild environment file is located at '/var/tmp/portage/net-print/cups-filters-1.13.2/temp/environment'. * Working directory: '/var/tmp/portage/net-print/cups-filters-1.13.2/work/cups-filters-1.13.2' * S: '/var/tmp/portage/net-print/cups-filters-1.13.2/work/cups-filters-1.13.2' >>> Failed to emerge net-print/cups-filters-1.13.2, Log file: >>> '/var/tmp/portage/net-print/cups-filters-1.13.2/temp/build.log' * Messages for package net-print/cups-filters-1.13.2: * ERROR: net-print/cups-filters-1.13.2::gentoo failed (compile phase): * emake failed * * If you need support, post the output of `emerge --info '=net-print/cups-filters-1.13.2::gentoo'`, * the complete build log and the output of `emerge -pqv '=net-print/cups-filters-1.13.2::gentoo'`. * The complete build log is located at '/var/tmp/portage/net-print/cups-filters-1.13.2/temp/build.log'. * The ebuild environment file is located at '/var/tmp/portage/net-print/cups-filters-1.13.2/temp/environment'. * Working directory: '/var/tmp/portage/net-print/cups-filters-1.13.2/work/cups-filters-1.13.2' * S: '/var/tmp/portage/net-print/cups-filters-1.13.2/work/cups-filters-1.13.2' Computer me # Looks like I'd better start liking geany.
×
×
  • Create New...