Search the Community

I built NetworkManager with these settings: net-misc/networkmanager -dhclient -ppp -wext (I rebuilt it with -dhcpcd and have the same issue, and also ensure that my kernel had support for wireless extensions). However, I came across this bug and this post: https://bugs.funtoo.org/browse/FL-2372 The segfault: NetworkManager segfault at 8 ip 00007fa89e102e16 sp 00007fff51f34be8 error 4 in libc-2.23.so[7fa89e084000+18e000] The interesting thing is that this issue is tied to shorewall. Whenever I start my shorewall, I get this segfault. I only get this issue with this particular device (router) and not my other devices (workstations). The rulesets are different between my workstations and my router so that may be why I don't experience this issue on those devices. Still though, I find it odd that shorewall or iptables would cause some sort of issue with NetworkManager. I just reverted back to 1.4.4-r1 and will use that until I can sort out this issue with 1.10.2.

Hi all, This one has been bugging me for a while. At first, I thought it might be related to running a hardened system, so I decided to migrate to a more vanilla install, but I get the same thing repeatably. I' running gentoo sources 4.13.9 and NetworkManager 1.4.4-r1. I can reproduce this problem on any of my machines as long as I restart NetworkManager when an interface is up. The workaround for me is to bring down the interface (ifconfig eth0 down) before restarting NetworkManager. Short of running strace, what else can I do to sort this out? Walter

Dear funtoo community, I did it, I started my install of funtoo, but can't get the networkmanager installed :-( Also, I do know the --autounmask-write comand but don't know how to add this ">=dev-libs/glib-2.48.2 dbus" to USE??? I am just starting, so please be patient with me ;-) Thank you for everyone willing to help Dirk (chroot) bell / # emerge linux-firmware networkmanager * IMPORTANT: 3 news items need reading for repository 'gentoo'. * Use eselect news read to view new items. * IMPORTANT: 3 config files in '/etc/portage' need updating. * See the CONFIGURATION FILES and CONFIGURATION FILES UPDATE TOOLS * sections of the emerge man page to learn how to update config files. Calculating dependencies... done! [ebuild N ] net-wireless/wireless-regdb-20170307 [ebuild N ] net-dialup/ppp-scripts-0 [ebuild N ] sys-kernel/linux-firmware-20170314 USE="-savedconfig" [ebuild N ] app-arch/zip-3.0-r3 USE="bzip2 crypt unicode -natspec" [ebuild N ] dev-libs/gobject-introspection-common-1.48.0 [ebuild N ] dev-lang/swig-3.0.12 USE="pcre -ccache -doc" [ebuild N ] sys-libs/slang-2.3.1a USE="pcre readline zlib -cjk -png -static-libs" ABI_X86="(64) -32 (-x32)" [ebuild N ] dev-libs/libbsd-0.8.3 USE="-static-libs" ABI_X86="(64) -32 (-x32)" [ebuild N ] net-misc/dhcp-4.3.5 USE="client ipv6 server ssl -ldap -libressl (-selinux) -vim-syntax" [ebuild N ] x11-proto/xproto-7.0.31 USE="-doc" ABI_X86="32 (64) (-x32)" [ebuild N ] media-fonts/font-util-1.3.1 [ebuild N ] x11-misc/util-macros-1.19.1 [ebuild N ] dev-libs/nspr-4.14 USE="-debug" ABI_X86="(64) -32 (-x32)" [ebuild N ] dev-libs/newt-0.52.18 USE="nls -gpm -tcl" PYTHON_TARGETS="python2_7" [ebuild N ] dev-libs/libuv-1.11.0 USE="-static-libs" ABI_X86="(64) -32 (-x32)" [ebuild N ] x11-proto/kbproto-1.0.7 ABI_X86="32 (64) (-x32)" [ebuild N ] x11-proto/xextproto-7.3.0 USE="-doc" ABI_X86="32 (64) (-x32)" [ebuild N ] x11-proto/xf86bigfontproto-1.2.0-r1 ABI_X86="32 (64) (-x32)" [ebuild N ] x11-proto/inputproto-2.3.2 ABI_X86="32 (64) (-x32)" [ebuild N ] x11-libs/xtrans-1.3.5 USE="-doc" [ebuild N ] dev-libs/libpthread-stubs-0.4 USE="-static-libs" ABI_X86="32 (64) (-x32)" [ebuild N ] dev-libs/libatomic_ops-7.4.4 [ebuild N ] dev-libs/nss-3.30.2 USE="nss-pem -cacert -utils" ABI_X86="(64) -32 (-x32)" [ebuild N ] x11-libs/libXau-1.0.8 USE="-static-libs" ABI_X86="32 (64) (-x32)" [ebuild N ] x11-libs/libXdmcp-1.1.2-r1 USE="-doc -static-libs" ABI_X86="32 (64) (-x32)" [ebuild N ] dev-libs/boehm-gc-7.6.0 USE="cxx threads -static-libs" [ebuild N ] www-client/w3m-0.5.3-r9 USE="nls ssl unicode -X -fbcon (-gpm) -gtk -imlib -libressl -lynxkeymap -nntp -xface" L10N="-ja" [ebuild N ] virtual/w3m-0 [ebuild NS ] sys-devel/autoconf-2.13 [2.69-r2] [ebuild N ] dev-lang/spidermonkey-1.8.5-r6 USE="-debug -minimal -static-libs {-test}" [ebuild N ] dev-libs/libnl-3.3.0_rc1 USE="python -static-libs -utils" ABI_X86="(64) -32 (-x32)" PYTHON_TARGETS="python2_7 python3_4 -python3_5" [ebuild N ] dev-python/typing-3.5.3.0 PYTHON_TARGETS="python2_7 python3_4 -pypy -pypy3 -python3_5" [ebuild N ] x11-proto/xcb-proto-1.12-r2 ABI_X86="32 (64) (-x32)" PYTHON_TARGETS="python2_7 python3_4 -python3_5" [ebuild N ] app-crypt/rhash-1.3.4 USE="nls -debug -openssl -static-libs" ABI_X86="(64) -32 (-x32)" [ebuild N ] x11-libs/libxcb-1.12-r2 USE="-doc (-selinux) -static-libs {-test} -xkb" ABI_X86="32 (64) (-x32)" [ebuild N ] x11-libs/libX11-1.6.4 USE="ipv6 -doc -static-libs {-test}" ABI_X86="32 (64) (-x32)" [ebuild N ] dev-python/m2crypto-0.25.1-r2 USE="-libressl" PYTHON_TARGETS="python2_7" [ebuild N ] net-wireless/crda-3.18-r1 USE="-gcrypt -libressl" [ebuild N ] net-dialup/ppp-2.4.7-r4 USE="ipv6 pam -activefilter -atm -dhcp -eap-tls -gtk -libressl -radius" [ebuild N ] app-arch/libarchive-3.3.1 USE="acl bzip2 e2fsprogs iconv lzma threads xattr zlib -expat -libressl -lz4 -lzo -nettle -static-libs" ABI_X86="(64) -32 (-x32)" [ebuild NS ] app-text/docbook-xml-dtd-4.2-r2 [4.1.2-r6, 4.3-r1] [ebuild NS ] app-text/docbook-xml-dtd-4.4-r2 [4.1.2-r6, 4.3-r1] [ebuild N ] dev-util/cmake-3.8.0 USE="ncurses -doc -emacs -qt5 -system-jsoncpp {-test}" [ebuild N ] app-text/xmlto-0.0.28-r1 USE="text -latex" [ebuild N ] sys-apps/dbus-1.10.18 USE="-X -debug -doc (-elogind) (-selinux) -static-libs -systemd {-test} -user-session" ABI_X86="(64) -32 (-x32)" [ebuild N ] net-wireless/wpa_supplicant-2.6-r1 USE="dbus hs2-0 readline ssl -ap -eap-sim -fasteap -gnutls -libressl -p2p (-ps3) -qt5 (-selinux) -smartcard -tdls -uncommon-eap-types (-wimax) -wps" [ebuild R ] dev-libs/glib-2.48.2 USE="dbus*" [ebuild N ] dev-util/gdbus-codegen-2.48.2 PYTHON_TARGETS="python2_7 python3_4 -python3_5" [ebuild N ] gnome-base/dconf-0.26.0 USE="{-test}" [ebuild N ] dev-libs/dbus-glib-0.108 USE="-debug -static-libs {-test}" ABI_X86="(64) -32 (-x32)" [ebuild N ] net-libs/libmbim-1.14.0 USE="-static-libs -udev" [ebuild N ] net-libs/libndp-1.6-r1 ABI_X86="(64) -32 (-x32)" [ebuild N ] net-libs/libqmi-1.18.0 USE="mbim -doc -static-libs" [ebuild N ] gnome-base/gsettings-desktop-schemas-3.20.0 USE="-introspection" [ebuild N ] dev-libs/gobject-introspection-1.48.0 USE="-cairo -doctool {-test}" PYTHON_TARGETS="python2_7" [ebuild N ] sys-auth/polkit-0.113-r3 USE="nls pam (-elogind) -examples -gtk -introspection -jit -kde (-selinux) {-test}" [ebuild N ] sys-auth/consolekit-1.0.1 USE="acl pam policykit -cgroups -debug -doc (-selinux) {-test}" [ebuild N ] dev-libs/libgudev-231 USE="-introspection -static-libs" ABI_X86="(64) -32 (-x32)" [ebuild N ] virtual/libgudev-230 USE="-introspection -static-libs" ABI_X86="(64) -32 (-x32)" [ebuild N ] net-misc/modemmanager-1.6.4 USE="qmi -introspection -mbim -policykit -systemd -vala" [ebuild N ] net-libs/libproxy-0.4.13-r2 USE="networkmanager python -gnome -kde -mono -perl -spidermonkey {-test} -webkit" ABI_X86="(64) -32 (-x32)" PYTHON_TARGETS="python2_7" [ebuild N ] net-libs/glib-networking-2.48.2 Uemerge linux-firmware networkmanagerSE="gnome libproxy ssl -smartcard {-test}" ABI_X86="(64) -32 (-x32)" [ebuild N ] net-libs/libsoup-2.54.1-r1 USE="ssl -debug -gssapi -introspection -samba {-test} -vala" ABI_X86="(64) -32 (-x32)" [ebuild N ] net-misc/networkmanager-1.4.4-r1 USE="dhclient modemmanager ncurses nss ppp resolvconf wext wifi -audit -bluetooth -connection-sharing -consolekit -gnutls -introspection -json -ofono (-selinux) -systemd -teamd {-test} -vala" ABI_X86="(64) -32 (-x32)" The following USE changes are necessary to proceed: (see "package.use" in the portage(5) man page for more details) # required by sys-auth/consolekit-1.0.1::gentoo # required by sys-auth/polkit-0.113-r3::gentoo # required by net-misc/networkmanager-1.4.4-r1::gentoo # required by net-libs/libproxy-0.4.13-r2::gentoo[networkmanager] # required by net-libs/glib-networking-2.48.2::gentoo[libproxy] # required by net-libs/libsoup-2.54.1-r1::gentoo >=dev-libs/glib-2.48.2 dbus Use --autounmask-write to write changes to config files (honoring CONFIG_PROTECT). Carefully examine the list of proposed changes, paying special attention to mask or keyword changes that may expose experimental or unstable packages. (chroot) bell / #

long caching in Firefox and all browsers a long time to load pages I think it is because of the conflict dhclient dhcpcd as network Manager,but I'm not sure. rc-status Runlevel: default NetworkManager [ started ] netmount [ started ] consolekit [ started ] postfix [ started ] sshd [ started ] local [ started ] Dynamic Runlevel: hotplugged Dynamic Runlevel: needed lvmetad [ started ] dbus [ started ] Dynamic Runlevel: manual /etc/rc.conf # Global OpenRC configuration settings # Set to "YES" if you want the rc system to try and start services # in parallel for a slight speed improvement. When running in parallel we # prefix the service output with its name as the output will get # jumbled up. # WARNING: whilst we have improved parallel, it can still potentially lock # the boot process. Don't file bugs about this unless you can supply # patches that fix it without breaking other things! #rc_parallel="NO" # Set rc_interactive to "YES" and you'll be able to press the I key during # boot so you can choose to start specific services. Set to "NO" to disable # this feature. This feature is automatically disabled if rc_parallel is # set to YES. #rc_interactive="YES" # If we need to drop to a shell, you can specify it here. # If not specified we use $SHELL, otherwise the one specified in /etc/passwd, # otherwise /bin/sh # Linux users could specify /sbin/sulogin rc_shell=/sbin/sulogin # Do we allow any started service in the runlevel to satisfy the dependency # or do we want all of them regardless of state? For example, if net.eth0 # and net.eth1 are in the default runlevel then with rc_depend_strict="NO" # both will be started, but services that depend on 'net' will work if either # one comes up. With rc_depend_strict="YES" we would require them both to # come up. #rc_depend_strict="YES" # rc_hotplug is a list of services that we allow to be hotplugged. # By default we do not allow hotplugging. # A hotplugged service is one started by a dynamic dev manager when a matching # hardware device is found. # This service is intrinsically included in the boot runlevel. # To disable services, prefix with a ! # Example - rc_hotplug="net.wlan !net.*" # This allows net.wlan and any service not matching net.* to be plugged. # Example - rc_hotplug="*" # This allows all services to be hotplugged #rc_hotplug="*" # rc_logger launches a logging daemon to log the entire rc process to # /var/log/rc.log # NOTE: Linux systems require the devfs service to be started before # logging can take place and as such cannot log the sysinit runlevel. #rc_logger="YES" # Through rc_log_path you can specify a custom log file. # The default value is: /var/log/rc.log #rc_log_path="/var/log/rc.log" # If you want verbose output for OpenRC, set this to yes. If you want # verbose output for service foo only, set it to yes in /etc/conf.d/foo. #rc_verbose=no # By default we filter the environment for our running scripts. To allow other # variables through, add them here. Use a * to allow all variables through. #rc_env_allow="VAR1 VAR2" # By default we assume that all daemons will start correctly. # However, some do not - a classic example is that they fork and return 0 AND # then child barfs on a configuration error. Or the daemon has a bug and the # child crashes. You can set the number of milliseconds start-stop-daemon # waits to check that the daemon is still running after starting here. # The default is 0 - no checking. #rc_start_wait=100 # rc_nostop is a list of services which will not stop when changing runlevels. # This still allows the service itself to be stopped when called directly. #rc_nostop="" # rc will attempt to start crashed services by default. # However, it will not stop them by default as that could bring down other # critical services. #rc_crashed_stop=NO #rc_crashed_start=YES # Set rc_nocolor to yes if you do not want colors displayed in OpenRC # output. #rc_nocolor=NO ############################################################################## # MISC CONFIGURATION VARIABLES # There variables are shared between many init scripts # Set unicode to YES to turn on unicode support for keyboards and screens. unicode="YES" # This is how long fuser should wait for a remote server to respond. The # default is 60 seconds, but it can be adjusted here. #rc_fuser_timeout=60 # Below is the default list of network fstypes. # # afs ceph cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs # nfs nfs4 ocfs2 shfs smbfs # # If you would like to add to this list, you can do so by adding your # own fstypes to the following variable. #extra_net_fs_list="" ############################################################################## # SERVICE CONFIGURATION VARIABLES # These variables are documented here, but should be configured in # /etc/conf.d/foo for service foo and NOT enabled here unless you # really want them to work on a global basis. # If your service has characters in its name which are not legal in # shell variable names and you configure the variables for it in this # file, those characters should be replaced with underscores in the # variable names as shown below. # Some daemons are started and stopped via start-stop-daemon. # We can set some things on a per service basis, like the nicelevel. #SSD_NICELEVEL="-19" # Pass ulimit parameters # If you are using bash in POSIX mode for your shell, note that the # ulimit command uses a block size of 512 bytes for the -c and -f # options #rc_ulimit="-u 30" # It's possible to define extra dependencies for services like so #rc_config="/etc/foo" #rc_need="openvpn" #rc_use="net.eth0" #rc_after="clock" #rc_before="local" #rc_provide="!net" # You can also enable the above commands here for each service. Below is an # example for service foo. #rc_foo_config="/etc/foo" #rc_foo_need="openvpn" #rc_foo_after="clock" # Below is an example for service foo-bar. Note that the '-' is illegal # in a shell variable name, so we convert it to an underscore. # example for service foo-bar. #rc_foo_bar_config="/etc/foo-bar" #rc_foo_bar_need="openvpn" #rc_foo_bar_after="clock" # You can also remove dependencies. # This is mainly used for saying which servies do NOT provide net. #rc_net_tap0_provide="!net" ############################################################################## # LINUX SPECIFIC OPTIONS # This is the subsystem type. Valid options on Linux: # "" - nothing special # "lxc" - Linux Containers # "openvz" - Linux OpenVZ # "prefix" - Prefix # "uml" - Usermode Linux # "vserver" - Linux vserver # "systemd-nspawn" - Container created by the systemd-nspawn utility # "xen0" - Xen0 Domain # "xenU" - XenU Domain # If this is commented out, automatic detection will be used. # # This should be set to the value representing the environment this file is # PRESENTLY in, not the virtualization the environment is capable of. #rc_sys="" # This is the number of tty's used in most of the rc-scripts (like # consolefont, numlock, etc ...) rc_tty_number=12 ############################################################################## # CGROUPS RESOURCE MANAGEMENT # If you have cgroups turned on in your kernel, this switch controls # whether or not a group for each controller is mounted under # /sys/fs/cgroup. # None of the other options in this section work if this is set to "NO". #rc_controller_cgroups="YES" # The following settings allow you to set up values for the cgroup # controllers for your services. # They can be set in this file;, however, if you do this, the settings # will apply to all of your services. # If you want different settings for each service, place the settings in # /etc/conf.d/foo for service foo. # The format is to specify the names of the settings followed by their # values. Each variable can hold multiple settings. # For example, you would use this to set the cpu.shares setting in the # cpu controller to 512 for your service. # rc_cgroup_cpu=" # cpu.shares 512 # " # #For more information about the adjustments that can be made with #cgroups, see Documentation/cgroups/* in the linux kernel source tree. # Set the blkio controller settings for this service. #rc_cgroup_blkio="" # Set the cpu controller settings for this service. #rc_cgroup_cpu="" # Add this service to the cpuacct controller (any value means yes). #rc_cgroup_cpuacct="" # Set the cpuset controller settings for this service. #rc_cgroup_cpuset="" # Set the devices controller settings for this service. #rc_cgroup_devices="" # Set the hugetlb controller settings for this service. #rc_cgroup_hugetlb="" # Set the memory controller settings for this service. #rc_cgroup_memory="" # Set the net_cls controller settings for this service. #rc_cgroup_net_cls="" # Set the net_prio controller settings for this service. #rc_cgroup_net_prio="" # Set the pids controller settings for this service. #rc_cgroup_pids="" # Set this to YES if yu want all of the processes in a service's cgroup # killed when the service is stopped or restarted. # This should not be set globally because it kills all of the service's # child processes, and most of the time this is undesirable. Please set # it in /etc/conf.d/<service>. # To perform this cleanup manually for a stopped service, you can # execute cgroup_cleanup with /etc/init.d/<service> cgroup_cleanup or # rc-service <service> cgroup_cleanup. # rc_cgroup_cleanup="NO"

Whenever I boot into funtoo, my wifi will only connect for about 2 seconds until losing connection and reconnecting, but I haven't had that problem on the other network I've connected to. Just so you know, I have the problem no matter how strong my signal is. I'm using networkmanager to manage my connections, and I havent edited any config files regarding networking, and my wifi card is a "Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter (rev 01)" My home wifi has the interface wlp5s0, and is encrypted with a wpa psk passphrase. My network supplier is Uverse, if that's any use to anyone. The other wifi has the interface wlan0 (I'm pretty sure) and I don't know how it's secured, but I needed a passwork to connect. The owner said that's it's very "open" , although I'm not sure what that's supposed to mean. None of these networks are hidden, by the way.

Each time I resume from hibernation the NetworkManager daemon needs to be restart. Does anyone else have this issue?

I am manually connecting to WWAN via a Sierra EM7345 modem. The NetworkManager doens't seem to start ModemManager. Only if the latter is ran manually, it then appeas in NM. It is the same problem discussed at http://forums-web2.gentoo.org/viewtopic-t-994224.html?sid=643d116182decb2cf23a9d0d6a43ca9a. Is there a way to fix this? Add MM as a service (openrc)?