Jump to content

Chris Kurlinski

  • Content Count

  • Joined

  • Last visited

  • Days Won


Everything posted by Chris Kurlinski

  1. I am an idiot... I just realised that the last time I did an install, I used netif.${whatever} as the name of my symbolic links in my network configs.... Please ignore my failing. It was an ID10T error #101 - PEBCAK....
  2. Here's a diff *** lxc 2015-12-22 06:55:00.886700278 -0500 --- lxc.mod 2015-12-22 06:55:23.323701398 -0500 *************** *** 71,78 **** # the net_admin capability), but we might also not set it up # at all on the host and leave the net_admin capable service # to take care of it. ! phys) use net.${_if} ;; ! *) need net.${_if} ;; esac done } --- 71,78 ---- # the net_admin capability), but we might also not set it up
  3. Just found an error in the init.d lxc script The ebuild depend section is: depend() { # be quiet, since we have to run depend() also for the # non-muxed init script, unfortunately. checkconfig 2>/dev/null || return 0 config ${CONFIGFILE} need localmount local _x _if for _x in $(lxc_get_net_link_type); do _if=${_x%:*} case "${_x##*:}" in # when the network type is set to phys, we can make use of a # network service (for instance to set it up before we d
  4. VirtualBox only needs the modules loaded, modprobe vboxdrv vboxnetadp vboxnetflt vboxpci. The userland side ( virtualbox, VBoxManage, VBoxHeadless ) uses the modules, openrc doesn't need to do anything. I did a clean install a month ago, whenever I switch hypervisors, and I don't see vboxdrv in my /etc/init.d or /etc/conf.d. Running app-emulation/virtualbox-5.0.8 Is this a left over from a previous series 4 box install.
  5. Here's mine fubar ~ # cat /etc/make.conf MAKEOPTS="-j25" VIDEO_CARDS="ast fbdev vesa" fubar ~ # epro === Enabled Profiles: === arch: x86-64bit build: current subarch: intel64-sandybridge flavor: server mix-ins: X mix-ins: console-extras mix-ins: no-systemd === All inherited flavors from server flavor: === core (from server flavor) minimal (from core flavor)
  6. I found the fix. Needed to patch the sb_edac. Link to the patch https://lkml.org/lkml/2015/8/5/695 [ 5.713554] EDAC sbridge: Seeking for: PCI ID 8086:3ca0 [ 5.713567] EDAC sbridge: Seeking for: PCI ID 8086:3ca0 [ 5.713575] EDAC sbridge: Seeking for: PCI ID 8086:3ca0 [ 5.713578] EDAC sbridge: Seeking for: PCI ID 8086:3ca8 [ 5.713587] EDAC sbridge: Seeking for: PCI ID 8086:3ca8 [ 5.713592] EDAC sbridge: Seeking for: PCI ID 8086:3ca8 [ 5.713594] EDAC sbridge: Seeking for: PCI ID 8086:3c71 [ 5.713600] EDAC sbridge: Seeking for: PCI ID 8086:3c71 [ 5.713605] EDAC s
  7. Ok I get it. Never really played with X before. So just a Xlib. I'll try it. As far as the phone, I keep going back to the OnePlus One. I was looking at the Asus Intel phone, but just looked like a pain wth weird button placement. Plus you can Install Sailfish OS on the OnePlus One. Thanks
  8. Anyone have a e5 sandy bridge. I keep getting an EDAC sdbridge error. EDAC sbridge: Some needed devices are missing EDAC sbridge: Couldn't find mic handler EDAC sbridge: Couldn't find mci handler Not sure that my registered ram is initilized. dmesg | grep -i edac [ 5.899737] EDAC MC: Ver: 3.0.0 [ 6.070393] EDAC sbridge: Seeking for: PCI ID 8086:3ca0 [ 6.070409] EDAC sbridge: Seeking for: PCI ID 8086:3ca0 [ 6.070421] EDAC sbridge: Seeking for: PCI ID 8086:3ca0 [ 6.070425] EDAC sbridge: Seeking for: PCI ID 8086:3ca8 [ 6.070434] EDAC sbridge: Seeking for: PCI ID 8086:3ca8 [
  9. Yeah I am getting sick of i3 and tigervnc. They are headaches for me right now, after my recent rebuild. I think i will try it your way. Running on a mac and android, so should not be a big deal. Just broke my work phone, so looking for a new primary, thinking about something that I could run Paranoid Android on. I want to do openvpn and ssh back to server. Just don't trust android to put my rsa certs on it yet. Is there a good tutorial for headless X?
  10. Update : Just created a git repo. https://github.com/ckurlinski/vm.d Also realised that I can do other VM formats, kvm xen qemu.
  11. I've been working out a json template / bash script to setup my system. With the end game being to hook it into metro to create my own stage3, exactly the way I want it. Including all the basics, netif, hostname, samba configs, et all. Basically I'm copying the modified configs from my current system, setup exactly the way I like, removing the comments and whatnot, and reformatting the config to a json entry, then catting the entries into a master file, resulting into a system config. Then I added the epro profiles. I can generate the system.json, but haven't got any further. Not sure
  12. Well, I wanted to play with VirtualBox on Funtoo again. Setup metro to create a custom stage3, added my stuff I use. All went well, chrooted into the new install, did all the normal setup stuff. Rebooted into the new install. all was fine in the world. Adjusted my VM's to use VirtualBox, and even finally got OS X to work right virtualised. Then the bullshit. How the fuck do you autostart vm's on boot. Went down the google rabbit hole, all the info was based on other Distros or outdated info. Fuck!!!! So I did what any self respecting person would do. I built a rc startup scrip
  13. Anyone else having issues with building in zfs / spl into kernel 4.1 and higher? ref - https://github.com/zfsonlinux/zfs/issues/3546 Anyone know of a work around? kernel patch? Tried using the latest git zfs sources and git kernel sources. Works with 4.0 kernels and lower. Currently on 4.0.9.
  14. Not sure how many people out there are like me, but here is a project I just about to complete for a client. I'm not in the IT industry, I'm in construction, a master plumber by trade, but do a lot of building management system integrations, and a lot of really specialty projects, like custom fire pits with iPad controls, high end pools ( we're talking 100K gal completely automated, heat pump / solar water heater for potable water, large solar systems ( looking forward to trying out the Tesla Power Wall ). Generally, anything that requires a computer interface, I'll do. Basic anything is b
  15. not sure if this counts, but I have gone to i3 wm running from tigervnc as my main server access, works great with my os x screenshare. i3 is completely stripped down, but I can still start virt-manager or whatnot. I can just close my laptop when the kids start screaming, or phone rings, open it back up, and everything is still there.......
  16. Add ram before ssd l2arc or zil. Then if the performance is still low, add the ssd's. ZFS loves ram and cpu power. I have dual e3-2620's and 32G's and have not needed a l2arc or zil, running 2-6 kvm's on vdevs, no problems.
  17. I'm a big fan of trying anything new, but the cardinal rule for me is this: Don't mess with the data. If you don't what to lose those irreplaceable pics of grandma, keep it on a separate drive. This is my mantra. I love playing with my system, updating, tweaking, and exploring. But this can be dangerous to your data. This is also the reason why I chosen to use zfs as my storage for all my data. I can get to it from just anywhere. If it's unix(-like), I can download the kernel modules and access it. I feel like zfs is the becoming the unix(-like) version of fat32. Let me explain
  18. vfat can't do a symbolic link. My UEFI setup is this -> /boot is a regular ext{2,3,4} partition, I don't use a separate partition because I don't boot off it. /boot/efi partition is vfat. So when I do any thing with the kernel, everything goes into boot, then I just copy my kernels into the /boot/efi partition. cp the xen kernel into /boot/efi. Don't forget to copy the xen.cfg to /boot/efi also. efibootmgr or UEFI only needs to be pointed to the xen.efi kernel in /boot/efi. xen.efi will automatically look for the xen.cfg file on the efi partition. Hope this helps.
  19. Thank you everyone working on this. Not that I need any of this, maybe 4.9.2 for the kernel, but I still think the hard work should be appreciated.
  20. no problem. I'm currently using KVM, but I might be going back to Xen. Are you booting Xen dom0 in PVH?
  21. oops. Sorry about the colouring, I general use Xcode to write my scripts, that was a direct cut/paste from Xcode..... # Monolithic Kernel efibootmgr -c -d /dev/sda -p 1 -L "funtoo" -l "\linux.efi" -u "root=PARTUUID=***** rootfstype=ext4 consoleblank=0" # Initramfs Kernel efibootmgr -c -d /dev/sda -p 1 -L "funtoo" -l "\linux.efi" -u "initrd=initramfs-whatever root=UUID=***** rootfstype=ext4 consoleblank=0" Also as a general note, the default sys-kernel/gentoo-sources config doesn't have the efi stub enabled. If this is not set the efibootmgr won't boot the entry.
  22. Update about using efibootmgr. I just figured out, and I'm not sure why, but if your using a initramfs, you need to pass root=UUID, not root=PARTUUID. I was running a monolithic kernel, and UUID would not work. And the correct efibootmgr command when using a initramfs -u "initrd=initramfs-whatever root=UUID=<place string here> rootfstype=<whatever>" and the initramfs needs to be in the EF00 partition.
  23. Looks to me like your domU fstab is wrong. The domU is loading the xen block front drivers, and your passing lvm disk in the domU fstab. [ 1.695015] blkfront: xvda2: flush diskcache: enabled; persistent grants: enabled; indirect descriptors: enabled; [ 1.695935] blkfront: xvda3: flush diskcache: enabled; persistent grants: enabled; indirect descriptors: enabled; Adjust the domU fstab, and try again.
  24. is /etc/env.d/02locale supposed to exist? cat /etc/env.d/02locale # Configuration file for eselect # This file has been automatically generated. LANG="en_US.utf8"
  • Create New...