Jump to content
funtoo forums

allen286

Members
  • Content Count

    7
  • Joined

  • Last visited

Posts posted by allen286


  1. Ok - I have recompiled the kernel with the driver back as a module. I think this is not a firmware problem... Watching the dmesg, it appears to connect, authenticate, and promptly disconnect:

    [  123.239152] wlan0: authenticate with 28:cf:da:b0:d2:68
    [  123.241905] wlan0: send auth to 28:cf:da:b0:d2:68 (try 1/3)
    [  123.243069] wlan0: authenticated
    [  123.243523] wlan0: associate with 28:cf:da:b0:d2:68 (try 1/3)
    [  123.245457] wlan0: RX AssocResp from 28:cf:da:b0:d2:68 (capab=0x511 status=0 aid=2)
    [  123.246390] wlan0: associated
    [  123.246434] cfg80211: Calling CRDA for country: US
    [  123.246499] wlan0: deauthenticating from 28:cf:da:b0:d2:68 by local choice (Reason: 3=DEAUTH_LEAVING)
    [  123.248903] cfg80211: Calling CRDA to update world regulatory domain
    

    Any advice for this one?


  2. Unfortunately, I did post the exact message... However, I did figure it out. I managed to get the (*) in the correct spots in genkernel, but the problem has been made worse by this... Now the driver does not load. Here's my new dmesg output:

    [    0.000000]   Normal   [mem 0x0000000100000000-0x000000046effffff]
    [    0.000000] Movable zone start for each node
    [    0.000000] Early memory node ranges
    [    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
    [    0.000000]   node   0: [mem 0x0000000000100000-0x000000007d21efff]
    [    0.000000]   node   0: [mem 0x000000007d226000-0x000000007d980fff]
    [    0.000000]   node   0: [mem 0x000000007dbee000-0x000000008dc0afff]
    [    0.000000]   node   0: [mem 0x000000008e10b000-0x000000008e675fff]
    [    0.000000]   node   0: [mem 0x000000008efff000-0x000000008effffff]
    [    0.000000]   node   0: [mem 0x0000000100000000-0x000000046effffff]
    [    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000046effffff]
    [    0.000000] On node 0 totalpages: 4181663
    [    0.000000]   DMA zone: 56 pages used for memmap
    [    0.000000]   DMA zone: 21 pages reserved
    [    0.000000]   DMA zone: 3996 pages, LIFO batch:0
    [    0.000000]   DMA32 zone: 7893 pages used for memmap
    [    0.000000]   DMA32 zone: 577283 pages, LIFO batch:31
    [    0.000000]   Normal zone: 49224 pages used for memmap
    [    0.000000]   Normal zone: 3600384 pages, LIFO batch:31
    [    0.000000] ACPI: PM-Timer IO Port: 0x1808
    [    0.000000] ACPI: Local APIC address 0xfee00000
    [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
    [    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
    [    0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
    [    0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [    0.000000] ACPI: IRQ0 used by override.
    [    0.000000] ACPI: IRQ9 used by override.
    [    0.000000] Using ACPI (MADT) for SMP configuration information
    [    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
    [    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
    [    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
    [    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
    [    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
    [    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    [    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    [    0.000000] PM: Registered nosave memory: [mem 0x7d21f000-0x7d225fff]
    [    0.000000] PM: Registered nosave memory: [mem 0x7d981000-0x7dbedfff]
    [    0.000000] PM: Registered nosave memory: [mem 0x8dc0b000-0x8e10afff]
    [    0.000000] PM: Registered nosave memory: [mem 0x8e676000-0x8e7aafff]
    [    0.000000] PM: Registered nosave memory: [mem 0x8e7ab000-0x8effefff]
    [    0.000000] PM: Registered nosave memory: [mem 0x8f000000-0xefffffff]
    [    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
    [    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfebfffff]
    [    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    [    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
    [    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
    [    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
    [    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
    [    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
    [    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
    [    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
    [    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
    [    0.000000] e820: [mem 0x8f000000-0xefffffff] available for PCI devices
    [    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:8 nr_node_ids:1
    [    0.000000] PERCPU: Embedded 29 pages/cpu @ffff88046ec00000 s78488 r8192 d32104 u262144
    [    0.000000] pcpu-alloc: s78488 r8192 d32104 u262144 alloc=1*2097152
    [    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
    [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 4124469
    [    0.000000] Kernel command line: BOOT_IMAGE=/kernel-genkernel-x86_64-4.0.2-gentoo root=/dev/sdb2
    [    0.000000] log_buf_len individual max cpu contribution: 4096 bytes
    [    0.000000] log_buf_len total cpu_extra contributions: 28672 bytes
    [    0.000000] log_buf_len min size: 32768 bytes
    [    0.000000] log_buf_len: 65536 bytes
    [    0.000000] early log buf free: 20076(61%)
    [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [    0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
    [    0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
    [    0.000000] AGP: Checking aperture...
    [    0.000000] AGP: No AGP bridge found
    [    0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [    0.000000] Memory: 16388148K/16726652K available (7379K kernel code, 415K rwdata, 2316K rodata, 844K init, 836K bss, 338504K reserved, 0K cma-reserved)
    [    0.000000] Hierarchical RCU implementation.
    [    0.000000] 	Additional per-CPU info printed with stalls.
    [    0.000000] 	RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=8.
    [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
    [    0.000000] NR_IRQS:4352 nr_irqs:488 16
    [    0.000000] spurious 8259A interrupt: IRQ7.
    [    0.000000] Console: colour VGA+ 80x25
    [    0.000000] console [tty0] enabled
    [    0.000000] hpet clockevent registered
    [    0.000000] tsc: Fast TSC calibration using PIT
    [    0.000000] tsc: Detected 2793.339 MHz processor
    [    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5586.67 BogoMIPS (lpj=27933390)
    [    0.000131] pid_max: default: 32768 minimum: 301
    [    0.000197] ACPI: Core revision 20150204
    [    0.008360] ACPI: All ACPI Tables successfully acquired
    [    0.018121] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
    [    0.018187] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
    [    0.018444] CPU: Physical Processor ID: 0
    [    0.018505] CPU: Processor Core ID: 0
    [    0.018568] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    [    0.018633] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [    0.019523] mce: CPU supports 9 MCE banks
    [    0.019596] CPU0: Thermal monitoring enabled (TM1)
    [    0.019665] process: using mwait in idle threads
    [    0.019730] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
    [    0.019795] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
    [    0.019958] Freeing SMP alternatives memory: 32K (ffffffff81ab7000 - ffffffff81abf000)
    [    0.020381] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
    [    0.120566] TSC deadline timer enabled
    [    0.120568] smpboot: CPU0: Intel(R) Core(TM) i7-4810MQ CPU @ 2.80GHz (fam: 06, model: 3c, stepping: 03)
    [    0.120795] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
    [    0.121118] ... version:                3
    [    0.121179] ... bit width:              48
    [    0.121241] ... generic registers:      4
    [    0.121303] ... value mask:             0000ffffffffffff
    [    0.121366] ... max period:             0000ffffffffffff
    [    0.121430] ... fixed-purpose events:   3
    [    0.121491] ... event mask:             000000070000000f
    [    0.121753] x86: Booting SMP configuration:
    [    0.121815] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
    [    0.220926] x86: Booted up 1 node, 8 CPUs
    [    0.221048] smpboot: Total of 8 processors activated (44693.42 BogoMIPS)
    [    0.226770] devtmpfs: initialized
    [    0.227010] PM: Registering ACPI NVS region [mem 0x7d21f000-0x7d225fff] (28672 bytes)
    [    0.227079] PM: Registering ACPI NVS region [mem 0x8e676000-0x8e7aafff] (1265664 bytes)
    [    0.227284] xor: automatically using best checksumming function:
    [    0.326769]    avx       : 24949.600 MB/sec
    [    0.326924] NET: Registered protocol family 16
    [    0.386867] cpuidle: using governor ladder
    [    0.466976] cpuidle: using governor menu
    [    0.470002] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [    0.470068] ACPI: bus type PCI registered
    [    0.470193] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
    [    0.470275] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
    [    0.470408] PCI: Using configuration type 1 for base access
    [    0.717295] raid6: sse2x1    8545 MB/s
    [    0.887502] raid6: sse2x2   11055 MB/s
    [    1.057707] raid6: sse2x4   13120 MB/s
    [    1.227910] raid6: avx2x1   16688 MB/s
    [    1.398117] raid6: avx2x2   19710 MB/s
    [    1.568320] raid6: avx2x4   22943 MB/s
    [    1.568381] raid6: using algorithm avx2x4 (22943 MB/s)
    [    1.568443] raid6: using avx2x2 recovery algorithm
    [    1.568547] ACPI: Added _OSI(Module Device)
    [    1.568609] ACPI: Added _OSI(Processor Device)
    [    1.568670] ACPI: Added _OSI(3.0 _SCP Extensions)
    [    1.568732] ACPI: Added _OSI(Processor Aggregator Device)
    [    1.571526] ACPI: Executed 1 blocks of module-level executable AML code
    [    1.573639] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [    1.574357] ACPI: Dynamic OEM Table Load:
    [    1.574512] ACPI: SSDT 0xFFFF88045DD78400 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 20120711)
    [    1.575174] ACPI: Dynamic OEM Table Load:
    [    1.575329] ACPI: SSDT 0xFFFF88045D8F3000 0005AA (v01 PmRef  ApIst    00003000 INTL 20120711)
    [    1.576028] ACPI: Dynamic OEM Table Load:
    [    1.576183] ACPI: SSDT 0xFFFF88045DED8C00 000119 (v01 PmRef  ApCst    00003000 INTL 20120711)
    [    1.581199] ACPI: Interpreter enabled
    [    1.581267] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150204/hwxface-580)
    [    1.581443] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150204/hwxface-580)
    [    1.581627] ACPI: (supports S0 S3 S4 S5)
    [    1.581689] ACPI: Using IOAPIC for interrupt routing
    [    1.581773] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [    1.587850] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
    [    1.587918] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [    1.588086] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
    [    1.588241] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
    [    1.588478] PCI host bridge to bus 0000:00
    [    1.588541] pci_bus 0000:00: root bus resource [bus 00-7e]
    [    1.588605] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
    [    1.588672] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
    [    1.588737] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
    [    1.588805] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
    [    1.588871] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
    [    1.588939] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
    [    1.589005] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
    [    1.589072] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
    [    1.589139] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
    [    1.589206] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfeafffff window]
    [    1.589278] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
    [    1.589349] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
    [    1.589379] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [    1.589413] pci 0000:00:01.0: System wakeup disabled by ACPI
    [    1.589534] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
    [    1.589551] pci 0000:00:14.0: reg 0x10: [mem 0xec300000-0xec30ffff 64bit]
    [    1.589606] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [    1.589633] pci 0000:00:14.0: System wakeup disabled by ACPI
    [    1.589731] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
    [    1.589748] pci 0000:00:16.0: reg 0x10: [mem 0xec31a000-0xec31a00f 64bit]
    [    1.589807] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [    1.589874] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
    [    1.589892] pci 0000:00:1a.0: reg 0x10: [mem 0xec318000-0xec3183ff]
    [    1.589974] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [    1.590012] pci 0000:00:1a.0: System wakeup disabled by ACPI
    [    1.590112] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
    [    1.590126] pci 0000:00:1b.0: reg 0x10: [mem 0xec310000-0xec313fff 64bit]
    [    1.590189] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [    1.590217] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [    1.590313] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
    [    1.590375] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [    1.590404] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [    1.590501] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
    [    1.590563] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    [    1.590592] pci 0000:00:1c.2: System wakeup disabled by ACPI
    [    1.590688] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
    [    1.590749] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [    1.590779] pci 0000:00:1c.3: System wakeup disabled by ACPI
    [    1.590874] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400
    [    1.590943] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    [    1.590973] pci 0000:00:1c.4: System wakeup disabled by ACPI
    [    1.591075] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
    [    1.591093] pci 0000:00:1d.0: reg 0x10: [mem 0xec317000-0xec3173ff]
    [    1.591175] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [    1.591212] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [    1.591311] pci 0000:00:1f.0: [8086:8c4b] type 00 class 0x060100
    [    1.591458] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
    [    1.591471] pci 0000:00:1f.2: reg 0x10: [io  0xf070-0xf077]
    [    1.591477] pci 0000:00:1f.2: reg 0x14: [io  0xf060-0xf063]
    [    1.591483] pci 0000:00:1f.2: reg 0x18: [io  0xf050-0xf057]
    [    1.591489] pci 0000:00:1f.2: reg 0x1c: [io  0xf040-0xf043]
    [    1.591495] pci 0000:00:1f.2: reg 0x20: [io  0xf020-0xf03f]
    [    1.591501] pci 0000:00:1f.2: reg 0x24: [mem 0xec316000-0xec3167ff]
    [    1.591535] pci 0000:00:1f.2: PME# supported from D3hot
    [    1.591589] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
    [    1.591601] pci 0000:00:1f.3: reg 0x10: [mem 0xec315000-0xec3150ff 64bit]
    [    1.591618] pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]
    [    1.591714] pci 0000:01:00.0: [10de:119a] type 00 class 0x030000
    [    1.591724] pci 0000:01:00.0: reg 0x10: [mem 0xeb000000-0xebffffff]
    [    1.591734] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
    [    1.591743] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
    [    1.591750] pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
    [    1.591756] pci 0000:01:00.0: reg 0x30: [mem 0xec000000-0xec07ffff pref]
    [    1.591810] pci 0000:01:00.0: System wakeup disabled by ACPI
    [    1.591909] pci 0000:01:00.1: [10de:0e0a] type 00 class 0x040300
    [    1.591919] pci 0000:01:00.1: reg 0x10: [mem 0xec080000-0xec083fff]
    [    1.608382] pci 0000:00:01.0: PCI bridge to [bus 01]
    [    1.608446] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
    [    1.608448] pci 0000:00:01.0:   bridge window [mem 0xeb000000-0xec0fffff]
    [    1.608450] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
    [    1.608494] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [    1.608623] pci 0000:03:00.0: [10ec:5289] type 00 class 0xff0000
    [    1.608641] pci 0000:03:00.0: reg 0x10: [mem 0xec200000-0xec20ffff]
    [    1.608780] pci 0000:03:00.0: supports D1 D2
    [    1.608781] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
    [    1.608808] pci 0000:03:00.0: System wakeup disabled by ACPI
    [    1.608915] pci 0000:03:00.2: [10ec:8168] type 00 class 0x020000
    [    1.608933] pci 0000:03:00.2: reg 0x10: [io  0xd000-0xd0ff]
    [    1.608960] pci 0000:03:00.2: reg 0x18: [mem 0xd2104000-0xd2104fff 64bit pref]
    [    1.608976] pci 0000:03:00.2: reg 0x20: [mem 0xd2100000-0xd2103fff 64bit pref]
    [    1.609057] pci 0000:03:00.2: supports D1 D2
    [    1.609058] pci 0000:03:00.2: PME# supported from D0 D1 D2 D3hot D3cold
    [    1.609084] pci 0000:03:00.2: System wakeup disabled by ACPI
    [    1.628412] pci 0000:00:1c.2: PCI bridge to [bus 03]
    [    1.628476] pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
    [    1.628478] pci 0000:00:1c.2:   bridge window [mem 0xec200000-0xec2fffff]
    [    1.628482] pci 0000:00:1c.2:   bridge window [mem 0xd2100000-0xd21fffff 64bit pref]
    [    1.628553] pci 0000:04:00.0: [8086:08b3] type 00 class 0x028000
    [    1.628589] pci 0000:04:00.0: reg 0x10: [mem 0xec100000-0xec101fff 64bit]
    [    1.628775] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
    [    1.628805] pci 0000:04:00.0: System wakeup disabled by ACPI
    [    1.648436] pci 0000:00:1c.3: PCI bridge to [bus 04]
    [    1.648502] pci 0000:00:1c.3:   bridge window [mem 0xec100000-0xec1fffff]
    [    1.648551] pci 0000:00:1c.4: PCI bridge to [bus 05-3d]
    [    1.648618] pci 0000:00:1c.4:   bridge window [mem 0xd4000000-0xea0fffff]
    [    1.648622] pci 0000:00:1c.4:   bridge window [mem 0x90000000-0xb1ffffff 64bit pref]
    [    1.648651] pci_bus 0000:00: on NUMA node 0
    [    1.648652] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
    [    1.649245] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
    [    1.649838] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
    [    1.650429] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 10 11 12 14 15)
    [    1.651018] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
    [    1.651607] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [    1.652291] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [    1.652971] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
    [    1.653559] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
    [    1.654325] ACPI: Enabled 5 GPEs in block 00 to 3F
    [    1.654504] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    [    1.654620] vgaarb: setting as boot device: PCI:0000:01:00.0
    [    1.654684] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [    1.654751] vgaarb: loaded
    [    1.654810] vgaarb: bridge control possible 0000:01:00.0
    [    1.654927] SCSI subsystem initialized
    [    1.655008] pps_core: LinuxPPS API ver. 1 registered
    [    1.655070] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
    [    1.655155] PTP clock support registered
    [    1.655273] PCI: Using ACPI for IRQ routing
    [    1.658136] PCI: pci_cache_line_size set to 64 bytes
    [    1.658184] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
    [    1.658185] e820: reserve RAM buffer [mem 0x7d21f000-0x7fffffff]
    [    1.658186] e820: reserve RAM buffer [mem 0x7d981000-0x7fffffff]
    [    1.658187] e820: reserve RAM buffer [mem 0x8dc0b000-0x8fffffff]
    [    1.658188] e820: reserve RAM buffer [mem 0x8e676000-0x8fffffff]
    [    1.658189] e820: reserve RAM buffer [mem 0x8f000000-0x8fffffff]
    [    1.658190] e820: reserve RAM buffer [mem 0x46f000000-0x46fffffff]
    [    1.658287] NET: Registered protocol family 23
    [    1.658403] cfg80211: Calling CRDA to update world regulatory domain
    [    1.658547] Switched to clocksource hpet
    [    1.660059] pnp: PnP ACPI init
    [    1.660172] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
    [    1.660240] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
    [    1.660377] system 00:01: [io  0x0680-0x069f] has been reserved
    [    1.660443] system 00:01: [io  0xffff] has been reserved
    [    1.660507] system 00:01: [io  0xffff] has been reserved
    [    1.660573] system 00:01: [io  0xffff] has been reserved
    [    1.660637] system 00:01: [io  0x1c00-0x1cfe] has been reserved
    [    1.660701] system 00:01: [io  0x1d00-0x1dfe] has been reserved
    [    1.660765] system 00:01: [io  0x1e00-0x1efe] has been reserved
    [    1.660830] system 00:01: [io  0x1f00-0x1ffe] has been reserved
    [    1.660894] system 00:01: [io  0x1800-0x18fe] could not be reserved
    [    1.660959] system 00:01: [io  0x164e-0x164f] has been reserved
    [    1.661023] system 00:01: [io  0x3322-0x3323] has been reserved
    [    1.661088] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    1.661111] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
    [    1.661148] system 00:03: [io  0x1854-0x1857] has been reserved
    [    1.661215] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [    1.661237] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
    [    1.661297] pnp 00:05: Plug and Play ACPI device, IDs SYN1212 PNP0f13 (active)
    [    1.661333] system 00:06: [io  0x04d0-0x04d1] has been reserved
    [    1.661400] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    1.661677] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [    1.661745] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
    [    1.661810] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
    [    1.661875] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
    [    1.661941] system 00:07: [mem 0xf0000000-0xf7ffffff] has been reserved
    [    1.662010] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
    [    1.662075] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
    [    1.662141] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
    [    1.662206] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
    [    1.662272] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
    [    1.662337] system 00:07: [mem 0xeffdf000-0xeffdffff] has been reserved
    [    1.662403] system 00:07: [mem 0xeffe0000-0xeffeffff] has been reserved
    [    1.662469] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    1.662598] pnp: PnP ACPI: found 8 devices
    [    1.667202] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
    [    1.667203] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
    [    1.667205] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
    [    1.667221] pci 0000:00:1c.4: bridge window [io  0x1000-0x0fff] to [bus 05-3d] add_size 1000
    [    1.667224] pci 0000:00:1c.0: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
    [    1.667225] pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [    1.667227] pci 0000:00:1c.0: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
    [    1.667228] pci 0000:00:1c.4: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
    [    1.667232] pci 0000:00:1c.0: BAR 8: assigned [mem 0xb2000000-0xb21fffff]
    [    1.667303] pci 0000:00:1c.0: BAR 9: assigned [mem 0xb2200000-0xb23fffff 64bit pref]
    [    1.667371] pci 0000:00:1c.0: BAR 7: assigned [io  0x2000-0x2fff]
    [    1.667436] pci 0000:00:1c.4: BAR 7: assigned [io  0x4000-0x4fff]
    [    1.667502] pci 0000:00:01.0: PCI bridge to [bus 01]
    [    1.667566] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
    [    1.667631] pci 0000:00:01.0:   bridge window [mem 0xeb000000-0xec0fffff]
    [    1.667698] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
    [    1.667766] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [    1.667829] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
    [    1.667896] pci 0000:00:1c.0:   bridge window [mem 0xb2000000-0xb21fffff]
    [    1.667963] pci 0000:00:1c.0:   bridge window [mem 0xb2200000-0xb23fffff 64bit pref]
    [    1.668033] pci 0000:00:1c.2: PCI bridge to [bus 03]
    [    1.668097] pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
    [    1.668163] pci 0000:00:1c.2:   bridge window [mem 0xec200000-0xec2fffff]
    [    1.668230] pci 0000:00:1c.2:   bridge window [mem 0xd2100000-0xd21fffff 64bit pref]
    [    1.668301] pci 0000:00:1c.3: PCI bridge to [bus 04]
    [    1.668366] pci 0000:00:1c.3:   bridge window [mem 0xec100000-0xec1fffff]
    [    1.668450] pci 0000:00:1c.4: PCI bridge to [bus 05-3d]
    [    1.668517] pci 0000:00:1c.4:   bridge window [io  0x4000-0x4fff]
    [    1.668596] pci 0000:00:1c.4:   bridge window [mem 0xd4000000-0xea0fffff]
    [    1.668663] pci 0000:00:1c.4:   bridge window [mem 0x90000000-0xb1ffffff 64bit pref]
    [    1.668734] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
    [    1.668736] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
    [    1.668737] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
    [    1.668738] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
    [    1.668739] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
    [    1.668740] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
    [    1.668741] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
    [    1.668742] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
    [    1.668743] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
    [    1.668744] pci_bus 0000:00: resource 13 [mem 0x90000000-0xfeafffff window]
    [    1.668745] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
    [    1.668746] pci_bus 0000:01: resource 1 [mem 0xeb000000-0xec0fffff]
    [    1.668747] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
    [    1.668748] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
    [    1.668749] pci_bus 0000:02: resource 1 [mem 0xb2000000-0xb21fffff]
    [    1.668751] pci_bus 0000:02: resource 2 [mem 0xb2200000-0xb23fffff 64bit pref]
    [    1.668752] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
    [    1.668753] pci_bus 0000:03: resource 1 [mem 0xec200000-0xec2fffff]
    [    1.668754] pci_bus 0000:03: resource 2 [mem 0xd2100000-0xd21fffff 64bit pref]
    [    1.668755] pci_bus 0000:04: resource 1 [mem 0xec100000-0xec1fffff]
    [    1.668756] pci_bus 0000:05: resource 0 [io  0x4000-0x4fff]
    [    1.668757] pci_bus 0000:05: resource 1 [mem 0xd4000000-0xea0fffff]
    [    1.668758] pci_bus 0000:05: resource 2 [mem 0x90000000-0xb1ffffff 64bit pref]
    [    1.668804] NET: Registered protocol family 2
    [    1.669007] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    [    1.669187] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [    1.669351] TCP: Hash tables configured (established 131072 bind 65536)
    [    1.669428] TCP: reno registered
    [    1.669489] UDP hash table entries: 8192 (order: 6, 262144 bytes)
    [    1.669581] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
    [    1.669727] NET: Registered protocol family 1
    [    1.670022] PCI: CLS mismatch (64 != 128), using 64 bytes
    [    1.670122] pci 0000:01:00.0: Video device with shadowed ROM
    [    1.670160] Trying to unpack rootfs image as initramfs...
    [    1.983220] Freeing initrd memory: 3320K (ffff880037974000 - ffff880037cb2000)
    [    1.983293] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [    1.983359] software IO TLB [mem 0x89c0b000-0x8dc0b000] (64MB) mapped at [ffff880089c0b000-ffff88008dc0afff]
    [    1.983723] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
    [    1.984116] futex hash table entries: 2048 (order: 5, 131072 bytes)
    [    1.984221] audit: initializing netlink subsys (disabled)
    [    1.984295] audit: type=2000 audit(1431401823.980:1): initialized
    [    1.984617] VFS: Disk quotas dquot_6.5.2
    [    1.984698] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [    1.984937] squashfs: version 4.0 (2009/01/31) Phillip Lougher
    [    1.985054] SGI XFS with ACLs, security attributes, realtime, no debug enabled
    [    1.985335] ocfs2: Registered cluster interface o2cb
    [    1.985424] OCFS2 User DLM kernel interface loaded
    [    1.985756] gfs2: GFS2 installed
    [    1.986141] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [    1.986212] io scheduler noop registered
    [    1.986275] io scheduler deadline registered
    [    1.986349] io scheduler cfq registered (default)
    [    1.986948] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
    [    1.987325] Linux agpgart interface v0.103
    [    1.988573] brd: module loaded
    [    1.989464] loop: module loaded
    [    1.989561] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
    [    1.992293] e100: Copyright(c) 1999-2006 Intel Corporation
    [    1.992371] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
    [    1.992439] e1000: Copyright (c) 1999-2006 Intel Corporation.
    [    1.992518] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
    [    1.992583] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
    [    1.992660] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.2.15-k
    [    1.992728] igb: Copyright (c) 2007-2014 Intel Corporation.
    [    1.992805] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.0.2-k
    [    1.992873] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
    [    1.992949] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.0.1-k
    [    1.993017] ixgbe: Copyright (c) 1999-2014 Intel Corporation.
    [    1.993093] ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver - version 2.12.1-k
    [    1.993177] ixgbevf: Copyright (c) 2009 - 2012 Intel Corporation.
    [    1.993252] i40e: Intel(R) Ethernet Connection XL710 Network Driver - version 1.2.6-k
    [    1.993321] i40e: Copyright (c) 2013 - 2014 Intel Corporation.
    [    1.993397] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
    [    1.993465] ixgb: Copyright (c) 1999-2008 Intel Corporation.
    [    1.993540] i40evf: Intel(R) XL710/X710 Virtual Function Network Driver - version 1.2.0
    [    1.993609] Copyright (c) 2013 - 2014 Intel Corporation.
    [    1.993684] Intel(R) Ethernet Switch Host Interface Driver - version 0.12.2-k
    [    1.993752] Copyright (c) 2013 Intel Corporation.
    [    1.993866] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [    1.993934] r8169 0000:03:00.2: can't disable ASPM; OS doesn't have ASPM control
    [    1.994679] r8169 0000:03:00.2 eth0: RTL8411 at 0xffffc90000026000, 80:fa:5b:01:6d:12, XID 08800800 IRQ 25
    [    1.994762] r8169 0000:03:00.2 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
    [    1.994856] ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2
    [    1.994923] ipw2100: Copyright(c) 2003-2006 Intel Corporation
    [    1.995001] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kq
    [    1.995068] ipw2200: Copyright(c) 2003-2006 Intel Corporation
    [    1.995145] libipw: 802.11 data/management/control stack, git-1.1.13
    [    1.995212] libipw: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
    [    1.995307] Intel(R) Wireless WiFi driver for Linux
    [    1.995372] Copyright(c) 2003- 2014 Intel Corporation
    [    1.995584] iwl4965: Intel(R) Wireless WiFi 4965 driver for Linux, in-tree:d
    [    1.995652] iwl4965: Copyright(c) 2003-2011 Intel Corporation
    [    1.995728] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:ds
    [    1.995811] iwl3945: Copyright(c) 2003-2011 Intel Corporation
    [    1.995923] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:SYNM] at 0x60,0x64 irq 1,12
    [    2.519045] i8042: Detected active multiplexing controller, rev 1.1
    [    2.521310] serio: i8042 KBD port at 0x60,0x64 irq 1
    [    2.521375] serio: i8042 AUX0 port at 0x60,0x64 irq 12
    [    2.521438] serio: i8042 AUX1 port at 0x60,0x64 irq 12
    [    2.521501] serio: i8042 AUX2 port at 0x60,0x64 irq 12
    [    2.521564] serio: i8042 AUX3 port at 0x60,0x64 irq 12
    [    2.521663] iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-3160-12.ucode failed with error -2
    [    2.521699] mousedev: PS/2 mouse device common for all mice
    [    2.521801] hidraw: raw HID events driver (C) Jiri Kosina
    [    2.521958] iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-3160-11.ucode failed with error -2
    [    2.522030] TCP: cubic registered
    [    2.522032] NET: Registered protocol family 17
    [    2.522068] NET: Registered protocol family 33
    [    2.522072] Key type rxrpc registered
    [    2.522072] Key type rxrpc_s registered
    [    2.522082] lib80211: common routines for IEEE802.11 drivers
    [    2.522083] lib80211_crypt: registered algorithm 'NULL'
    [    2.522085] lib80211_crypt: registered algorithm 'WEP'
    [    2.522087] lib80211_crypt: registered algorithm 'CCMP'
    [    2.522088] lib80211_crypt: registered algorithm 'TKIP'
    [    2.522099] 9pnet: Installing 9P2000 support
    [    2.522451] registered taskstats version 1
    [    2.522602] iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-3160-10.ucode failed with error -2
    [    2.522689] iwlwifi 0000:04:00.0: request for firmware file 'iwlwifi-3160-10.ucode' failed.
    [    2.522769] iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-3160-9.ucode failed with error -2
    [    2.522862] iwlwifi 0000:04:00.0: request for firmware file 'iwlwifi-3160-9.ucode' failed.
    [    2.522940] iwlwifi 0000:04:00.0: no suitable firmware found!
    [    2.523066] Btrfs loaded
    [    2.523770] Freeing unused kernel memory: 844K (ffffffff819e4000 - ffffffff81ab7000)
    [    2.525038] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [    2.589796] libata version 3.00 loaded.
    [    2.775569] ahci 0000:00:1f.2: version 3.0
    [    2.775688] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
    [    2.775711] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0xf impl SATA mode
    [    2.775713] ahci 0000:00:1f.2: flags: 64bit ncq stag led clo pio slum part ems sxs apst 
    [    2.930731] scsi host0: ahci
    [    2.930824] scsi host1: ahci
    [    2.930912] scsi host2: ahci
    [    2.930997] scsi host3: ahci
    [    2.931082] scsi host4: ahci
    [    2.931168] scsi host5: ahci
    [    2.931222] ata1: SATA max UDMA/133 abar m2048@0xec316000 port 0xec316100 irq 26
    [    2.931224] ata2: SATA max UDMA/133 abar m2048@0xec316000 port 0xec316180 irq 26
    [    2.931226] ata3: SATA max UDMA/133 abar m2048@0xec316000 port 0xec316200 irq 26
    [    2.931227] ata4: SATA max UDMA/133 abar m2048@0xec316000 port 0xec316280 irq 26
    [    2.931228] ata5: DUMMY
    [    2.931229] ata6: DUMMY
    [    3.010214] tsc: Refined TSC clocksource calibration: 2793.531 MHz
    [    3.350586] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [    3.351717] ata1.00: ATA-8: HGST HTS721010A9E630, JB0OA3J0, max UDMA/133
    [    3.351719] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [    3.352951] ata1.00: configured for UDMA/133
    [    3.353024] scsi 0:0:0:0: Direct-Access     ATA      HGST HTS721010A9 A3J0 PQ: 0 ANSI: 5
    [    3.353163] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
    [    3.353166] sd 0:0:0:0: [sda] 4096-byte physical blocks
    [    3.353205] sd 0:0:0:0: [sda] Write Protect is off
    [    3.353208] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [    3.353231] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    3.637281]  sda: sda1 sda2
    [    3.637463] sd 0:0:0:0: [sda] Attached SCSI disk
    [    3.721050] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [    3.722046] ata2.00: ATA-8: Hitachi HTS545032B9SA02, PB3AC60W, max UDMA/133
    [    3.722047] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [    3.723169] ata2.00: configured for UDMA/133
    [    3.723224] scsi 1:0:0:0: Direct-Access     ATA      Hitachi HTS54503 C60W PQ: 0 ANSI: 5
    [    3.723355] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
    [    3.723386] sd 1:0:0:0: [sdb] Write Protect is off
    [    3.723388] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    [    3.723403] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    3.733717] psmouse serio2: synaptics: queried max coordinates: x [..5662], y [..4660]
    [    3.743674]  sdb: sdb1 sdb2
    [    3.743859] sd 1:0:0:0: [sdb] Attached SCSI disk
    [    3.849335] psmouse serio2: synaptics: queried min coordinates: x [1280..], y [1194..]
    [    3.998254] psmouse serio2: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00223/0x840300/0x122c00, board id: 1760, fw id: 1211538
    [    4.011423] Switched to clocksource tsc
    [    4.035856] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input4
    [    4.071462] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [    4.075158] ata3.00: ATAPI: TSSTcorp CDDVDW SN-208FB, TC00, max UDMA/100
    [    4.078184] ata3.00: configured for UDMA/100
    [    4.079606] scsi 2:0:0:0: CD-ROM            TSSTcorp CDDVDW SN-208FB  TC00 PQ: 0 ANSI: 5
    [    4.095515] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [    4.095516] cdrom: Uniform CD-ROM driver Revision: 3.20
    [    4.095605] sr 2:0:0:0: Attached scsi CD-ROM sr0
    [    4.441900] ata4: SATA link down (SStatus 0 SControl 300)
    [    4.512705] sd 0:0:0:0: Attached scsi generic sg0 type 0
    [    4.512731] sd 1:0:0:0: Attached scsi generic sg1 type 0
    [    4.512754] sr 2:0:0:0: Attached scsi generic sg2 type 5
    [    4.597917] scsi: <fdomain> Detection failed (no card)
    [    4.713010] GDT-HA: Storage RAID Controller Driver. Version: 3.05
    [    4.765628] imm: Version 2.05 (for Linux 2.4.0)
    [    4.943498] Fusion MPT base driver 3.04.20
    [    4.943499] Copyright (c) 1999-2008 LSI Corporation
    [    4.971319] Fusion MPT SPI Host driver 3.04.20
    [    4.989095] Fusion MPT FC Host driver 3.04.20
    [    5.007323] Fusion MPT SAS Host driver 3.04.20
    [    5.021946] 3ware Storage Controller device driver for Linux v1.26.02.003.
    [    5.035819] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
    [    5.050874] HP CISS Driver (v 3.6.26)
    [    5.094971] Adaptec aacraid driver 1.2-0[30300]-ms
    [    5.127182] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
    [    5.128035] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
    [    5.158575] megasas: 06.806.08.00-rc1
    [    5.175974] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.16-k.
    [    5.205538] Emulex LightPulse Fibre Channel SCSI driver 10.4.8000.0.
    [    5.205539] Copyright(c) 2004-2014 Emulex.  All rights reserved.
    [    5.244130] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
    [    6.006264] ACPI: bus type USB registered
    [    6.006287] usbcore: registered new interface driver usbfs
    [    6.006298] usbcore: registered new interface driver hub
    [    6.006319] usbcore: registered new device driver usb
    [    6.007782] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    6.045059] usbcore: registered new interface driver usb-storage
    [    6.071657] uhci_hcd: USB Universal Host Controller Interface driver
    [    6.096957] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [    6.147599] usbcore: registered new interface driver usbhid
    [    6.147600] usbhid: USB HID core driver
    [    6.395365] device-mapper: uevent: version 1.0.3
    [    6.395408] device-mapper: ioctl: 4.30.0-ioctl (2014-12-22) initialised: dm-devel@redhat.com
    [    6.609425] md: raid0 personality registered for level 0
    [    6.636061] md: raid1 personality registered for level 1
    [    6.670114] async_tx: api initialized (async)
    [    6.685225] md: raid6 personality registered for level 6
    [    6.685226] md: raid5 personality registered for level 5
    [    6.685227] md: raid4 personality registered for level 4
    [    6.715091] md: raid10 personality registered for level 10
    [    6.742925] md: linear personality registered for level -1
    [    6.771441] md: multipath personality registered for level -4
    [    6.817020] JFS: nTxBlock = 8192, nTxLock = 65536
    [    6.858953] RPC: Registered named UNIX socket transport module.
    [    6.858954] RPC: Registered udp transport module.
    [    6.858955] RPC: Registered tcp transport module.
    [    6.858955] RPC: Registered tcp NFSv4.1 backchannel transport module.
    [    6.894536] fuse init (API version 7.23)
    [    6.987129] Loading iSCSI transport class v2.0-870.
    [    7.237872] UDF-fs: warning (device sdb2): udf_fill_super: No partition found (2)
    [    7.244395] (mount,14810,0):ocfs2_fill_super:1026 ERROR: superblock probe failed!
    [    7.244396] (mount,14810,0):ocfs2_fill_super:1217 ERROR: status = -22
    [    7.244506] gfs2: gfs2 mount does not exist
    [    7.244593] BTRFS: device fsid 59b3eb07-79cd-4973-ab94-ae247a4de533 devid 1 transid 2498 /dev/sdb2
    [    7.244858] BTRFS info (device sdb2): disk space caching is enabled
    [   10.155269] udevd[15044]: starting version 1.5.3
    [   10.350015] random: udevd urandom read with 63 bits of entropy available
    [   11.104721] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
    [   11.104759] ACPI: AC Adapter [AC] (on-line)
    [   11.105297] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input15
    [   11.105330] ACPI: Power Button [PWRB]
    [   11.105365] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input16
    [   11.105387] ACPI: Sleep Button [SLPB]
    [   11.105452] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input17
    [   11.105503] ACPI: Lid Switch [LID0]
    [   11.105544] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input18
    [   11.105566] ACPI: Power Button [PWRF]
    [   11.105851] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
    [   11.105854] ACPI: Battery Slot [BAT0] (battery present)
    [   11.242598] ehci-pci: EHCI PCI platform driver
    [   11.242711] ehci-pci 0000:00:1a.0: EHCI Host Controller
    [   11.242717] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [   11.242727] ehci-pci 0000:00:1a.0: debug port 2
    [   11.246616] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
    [   11.246628] ehci-pci 0000:00:1a.0: irq 16, io mem 0xec318000
    [   11.260050] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [   11.260096] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
    [   11.260098] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [   11.260099] usb usb1: Product: EHCI Host Controller
    [   11.260100] usb usb1: Manufacturer: Linux 4.0.2-gentoo ehci_hcd
    [   11.260101] usb usb1: SerialNumber: 0000:00:1a.0
    [   11.260215] hub 1-0:1.0: USB hub found
    [   11.260222] hub 1-0:1.0: 2 ports detected
    [   11.260405] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [   11.260410] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [   11.260420] ehci-pci 0000:00:1d.0: debug port 2
    [   11.264306] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [   11.264317] ehci-pci 0000:00:1d.0: irq 23, io mem 0xec317000
    [   11.280073] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [   11.280112] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
    [   11.280114] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [   11.280115] usb usb2: Product: EHCI Host Controller
    [   11.280117] usb usb2: Manufacturer: Linux 4.0.2-gentoo ehci_hcd
    [   11.280117] usb usb2: SerialNumber: 0000:00:1d.0
    [   11.280218] hub 2-0:1.0: USB hub found
    [   11.280224] hub 2-0:1.0: 2 ports detected
    [   11.314427] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [   11.314432] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
    [   11.314498] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
    [   11.314503] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
    [   11.314574] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
    [   11.314576] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [   11.314577] usb usb3: Product: xHCI Host Controller
    [   11.314578] usb usb3: Manufacturer: Linux 4.0.2-gentoo xhci-hcd
    [   11.314579] usb usb3: SerialNumber: 0000:00:14.0
    [   11.314677] hub 3-0:1.0: USB hub found
    [   11.314694] hub 3-0:1.0: 14 ports detected
    [   11.317356] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [   11.317359] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
    [   11.317406] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
    [   11.317407] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [   11.317409] usb usb4: Product: xHCI Host Controller
    [   11.317410] usb usb4: Manufacturer: Linux 4.0.2-gentoo xhci-hcd
    [   11.317410] usb usb4: SerialNumber: 0000:00:14.0
    [   11.317512] hub 4-0:1.0: USB hub found
    [   11.317524] hub 4-0:1.0: 6 ports detected
    [   11.379021] [drm] Initialized drm 1.1.0 20060810
    [   11.435122] snd_hda_intel 0000:01:00.1: Disabling MSI
    [   11.470198] ACPI Warning: SystemIO range 0x000000000000f000-0x000000000000f01f conflicts with OpRegion 0x000000000000f000-0x000000000000f00f (\_SB_.PCI0.SBUS.SMBI) (20150204/utaddress-258)
    [   11.470202] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [   11.471102] thermal LNXTHERM:00: registered as thermal_zone0
    [   11.471103] ACPI: Thermal Zone [TZ0] (51 C)
    [   11.471104] Monitor-Mwait will be used to enter C-1 state
    [   11.471110] Monitor-Mwait will be used to enter C-2 state
    [   11.471117] ACPI: acpi_idle registered with cpuidle
    [   11.471143] ACPI: Video Device [PEGP] (multi-head: yes  rom: no  post: no)
    [   11.580421] usb 1-1: new high-speed USB device number 2 using ehci-pci
    [   11.596942] sound hdaudioC0D0: autoconfig for ALC892: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:line
    [   11.596944] sound hdaudioC0D0:    speaker_outs=1 (0x14/0x0/0x0/0x0/0x0)
    [   11.596945] sound hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
    [   11.596946] sound hdaudioC0D0:    mono: mono_out=0x0
    [   11.596947] sound hdaudioC0D0:    dig-out=0x1e/0x0
    [   11.596948] sound hdaudioC0D0:    inputs:
    [   11.596950] sound hdaudioC0D0:      Mic=0x18
    [   11.596951] sound hdaudioC0D0:      Internal Mic=0x12
    [   11.596952] sound hdaudioC0D0:      Line=0x1a
    [   11.600447] usb 2-1: new high-speed USB device number 2 using ehci-pci
    [   11.630483] usb 3-3: new full-speed USB device number 2 using xhci_hcd
    [   11.708524] acpi device:02: registered as cooling_device5
    [   11.708723] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input19
    [   11.730994] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
    [   11.730996] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    [   11.731142] hub 1-1:1.0: USB hub found
    [   11.731242] hub 1-1:1.0: 6 ports detected
    [   11.751017] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
    [   11.751019] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    [   11.751167] hub 2-1:1.0: USB hub found
    [   11.751266] hub 2-1:1.0: 8 ports detected
    [   11.772260] usb 3-3: New USB device found, idVendor=1c7a, idProduct=0603
    [   11.772262] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    [   11.772263] usb 3-3: Product: EgisTec_ES603
    [   11.772264] usb 3-3: Manufacturer: EgisTec
    [   11.779221] input: PC Speaker as /devices/platform/pcspkr/input/input20
    [   11.888256] microcode: CPU0 sig=0x306c3, pf=0x10, revision=0x17
    [   11.890814] usb 3-7: new full-speed USB device number 3 using xhci_hcd
    [   11.911015] microcode: CPU1 sig=0x306c3, pf=0x10, revision=0x17
    [   11.911040] microcode: CPU2 sig=0x306c3, pf=0x10, revision=0x17
    [   11.911063] microcode: CPU3 sig=0x306c3, pf=0x10, revision=0x17
    [   11.911075] microcode: CPU4 sig=0x306c3, pf=0x10, revision=0x17
    [   11.911087] microcode: CPU5 sig=0x306c3, pf=0x10, revision=0x17
    [   11.911110] microcode: CPU6 sig=0x306c3, pf=0x10, revision=0x17
    [   11.911134] microcode: CPU7 sig=0x306c3, pf=0x10, revision=0x17
    [   11.911182] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
    [   12.031918] usb 3-7: New USB device found, idVendor=8087, idProduct=07dc
    [   12.031920] usb 3-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    [   12.050998] sound hdaudioC1D0: autoconfig for ID 40: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line
    [   12.051000] sound hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
    [   12.051002] sound hdaudioC1D0:    hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
    [   12.051003] sound hdaudioC1D0:    mono: mono_out=0x0
    [   12.051004] sound hdaudioC1D0:    dig-out=0x5/0x7
    [   12.051004] sound hdaudioC1D0:    inputs:
    [   12.067768] nvidia: module license 'NVIDIA' taints kernel.
    [   12.067769] Disabling lock debugging due to kernel taint
    [   12.074530] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
    [   12.074811] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0
    [   12.074817] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  349.16  Wed Apr  8 00:17:22 PDT 2015
    [   12.125112] random: nonblocking pool is initialized
    [   12.626391] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95)
    [   12.626419] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95)
    [   12.626435] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95)
    [   12.626458] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95)
    [   12.626474] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95)
    [   12.626500] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95)
    [   12.626515] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95)
    [   12.626530] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95)
    [   12.798215] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95)
    [   12.798260] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95)
    [   13.100366] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95)
    [   15.352382] BTRFS info (device sdb2): disk space caching is enabled
    [   15.471318] Adding 4194300k swap on /dev/sda2.  Priority:-1 extents:1 across:4194300k 
    [   19.102332] r8169 0000:03:00.2 eth0: link down
    [   19.113392] NET: Registered protocol family 10
    [   19.113879] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [   23.224518] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95)
    [   23.224553] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95)
    [   23.224569] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95)
    [   23.224593] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95)
    [   23.224608] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95)
    [   23.224634] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95)
    [   23.224650] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95)
    [   23.224665] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95)
    [   23.287721] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95)
    [   23.287760] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95)
    [   23.338565] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95)
    [   61.820547] cfg80211: Verifying active interfaces after reg change
    [   75.480271] typefind:sink[16784]: segfault at 7f006020be00 ip 00007f006ead8c5f sp 00007f006e0bab60 error 4 in libgsttypefindfunctions.so[7f006eac9000+15000]
    [   85.144420] traps: gom-flickr-mine[16942] trap int3 ip:7f87e7db113a sp:7ffe7528bf20 error:0
    
    

    My thinking is that, since the driver is in /lib/firmware, the system cannot read the ucode (as it tries to load it before the root system is mounted). Is there a way to tell the kernel to look for the driver in the boot partition? If I can put it there, then the driver should load.


  3. So the kernel I'm using has Intel Wireless WiFi MVM Firmware support, but it is compiled as a module. When trying to switch to built in, I get a message that says "This feature depends on another which has been configured as a module. As a result, this feature will be built as a module." Maybe I should use an older version of wpa_supplicant?


  4. I was for some reason unable to directly include the driver... It says that it depends on things being built as modules, so it will be built as a module. Any way to find these dependencies? I think you're on the right track; I never thought to check this.


  5. Thanks for the reply! I did install linux-firmware, and I am using network manager from Gnome 3.

     

    Here's lspci -k:

    00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller (rev 06)
    	Subsystem: CLEVO/KAPOK Computer Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller
    00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06)
    	Kernel driver in use: pcieport
    00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 05)
    	Subsystem: CLEVO/KAPOK Computer 8 Series/C220 Series Chipset Family USB xHCI
    	Kernel driver in use: xhci_hcd
    	Kernel modules: xhci_pci
    00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04)
    	Subsystem: CLEVO/KAPOK Computer 8 Series/C220 Series Chipset Family MEI Controller
    00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 (rev 05)
    	Subsystem: CLEVO/KAPOK Computer 8 Series/C220 Series Chipset Family USB EHCI
    	Kernel driver in use: ehci-pci
    	Kernel modules: ehci_pci
    00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 05)
    	Subsystem: CLEVO/KAPOK Computer 8 Series/C220 Series Chipset High Definition Audio Controller
    	Kernel driver in use: snd_hda_intel
    	Kernel modules: snd_hda_intel
    00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 (rev d5)
    	Kernel driver in use: pcieport
    00:1c.2 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #3 (rev d5)
    	Kernel driver in use: pcieport
    00:1c.3 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #4 (rev d5)
    	Kernel driver in use: pcieport
    00:1c.4 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #5 (rev d5)
    	Kernel driver in use: pcieport
    00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 (rev 05)
    	Subsystem: CLEVO/KAPOK Computer 8 Series/C220 Series Chipset Family USB EHCI
    	Kernel driver in use: ehci-pci
    	Kernel modules: ehci_pci
    00:1f.0 ISA bridge: Intel Corporation HM87 Express LPC Controller (rev 05)
    	Subsystem: CLEVO/KAPOK Computer HM87 Express LPC Controller
    00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 05)
    	Subsystem: CLEVO/KAPOK Computer 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode]
    	Kernel driver in use: ahci
    	Kernel modules: ahci
    00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 05)
    	Subsystem: CLEVO/KAPOK Computer 8 Series/C220 Series Chipset Family SMBus Controller
    	Kernel modules: i2c_i801
    01:00.0 VGA compatible controller: NVIDIA Corporation GK104M [GeForce GTX 860M] (rev a1)
    	Subsystem: CLEVO/KAPOK Computer GK104M [GeForce GTX 860M]
    	Kernel driver in use: nvidia
    	Kernel modules: nvidia
    01:00.1 Audio device: NVIDIA Corporation GK104 HDMI Audio Controller (rev a1)
    	Subsystem: CLEVO/KAPOK Computer GK104 HDMI Audio Controller
    	Kernel driver in use: snd_hda_intel
    	Kernel modules: snd_hda_intel
    03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5289 (rev 01)
    	Subsystem: CLEVO/KAPOK Computer Device 0376
    03:00.2 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 0a)
    	Subsystem: CLEVO/KAPOK Computer RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
    	Kernel driver in use: r8169
    	Kernel modules: r8169
    04:00.0 Network controller: Intel Corporation Wireless 3160 (rev 83)
    	Subsystem: Intel Corporation Dual Band Wireless-AC 3160
    	Kernel driver in use: iwlwifi
    	Kernel modules: iwlwifi
    
    

    Here's the dmesg output:

    [    0.336395] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [    0.336563] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
    [    0.336717] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
    [    0.337080] PCI host bridge to bus 0000:00
    [    0.337143] pci_bus 0000:00: root bus resource [bus 00-7e]
    [    0.337208] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
    [    0.337272] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
    [    0.337337] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [    0.337404] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
    [    0.337469] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    [    0.337536] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
    [    0.337601] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
    [    0.337668] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
    [    0.337733] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
    [    0.337798] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfeafffff]
    [    0.337869] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
    [    0.337940] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
    [    0.337970] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [    0.338006] pci 0000:00:01.0: System wakeup disabled by ACPI
    [    0.338127] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
    [    0.338144] pci 0000:00:14.0: reg 0x10: [mem 0xec300000-0xec30ffff 64bit]
    [    0.338200] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [    0.338226] pci 0000:00:14.0: System wakeup disabled by ACPI
    [    0.338325] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
    [    0.338342] pci 0000:00:16.0: reg 0x10: [mem 0xec31a000-0xec31a00f 64bit]
    [    0.338400] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [    0.338467] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
    [    0.338485] pci 0000:00:1a.0: reg 0x10: [mem 0xec318000-0xec3183ff]
    [    0.338567] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [    0.338604] pci 0000:00:1a.0: System wakeup disabled by ACPI
    [    0.338705] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
    [    0.338719] pci 0000:00:1b.0: reg 0x10: [mem 0xec310000-0xec313fff 64bit]
    [    0.338782] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [    0.338809] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [    0.338905] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
    [    0.338968] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [    0.338997] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [    0.339093] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
    [    0.339155] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    [    0.339184] pci 0000:00:1c.2: System wakeup disabled by ACPI
    [    0.339280] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
    [    0.339342] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [    0.339371] pci 0000:00:1c.3: System wakeup disabled by ACPI
    [    0.339468] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400
    [    0.339538] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    [    0.339568] pci 0000:00:1c.4: System wakeup disabled by ACPI
    [    0.339670] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
    [    0.339688] pci 0000:00:1d.0: reg 0x10: [mem 0xec317000-0xec3173ff]
    [    0.339770] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [    0.339808] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [    0.339908] pci 0000:00:1f.0: [8086:8c4b] type 00 class 0x060100
    [    0.340054] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
    [    0.340067] pci 0000:00:1f.2: reg 0x10: [io  0xf070-0xf077]
    [    0.340074] pci 0000:00:1f.2: reg 0x14: [io  0xf060-0xf063]
    [    0.340079] pci 0000:00:1f.2: reg 0x18: [io  0xf050-0xf057]
    [    0.340085] pci 0000:00:1f.2: reg 0x1c: [io  0xf040-0xf043]
    [    0.340091] pci 0000:00:1f.2: reg 0x20: [io  0xf020-0xf03f]
    [    0.340098] pci 0000:00:1f.2: reg 0x24: [mem 0xec316000-0xec3167ff]
    [    0.340131] pci 0000:00:1f.2: PME# supported from D3hot
    [    0.340186] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
    [    0.340198] pci 0000:00:1f.3: reg 0x10: [mem 0xec315000-0xec3150ff 64bit]
    [    0.340216] pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]
    [    0.340311] pci 0000:01:00.0: [10de:119a] type 00 class 0x030000
    [    0.340321] pci 0000:01:00.0: reg 0x10: [mem 0xeb000000-0xebffffff]
    [    0.340331] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
    [    0.340340] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
    [    0.340347] pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
    [    0.340353] pci 0000:01:00.0: reg 0x30: [mem 0xec000000-0xec07ffff pref]
    [    0.340407] pci 0000:01:00.0: System wakeup disabled by ACPI
    [    0.340506] pci 0000:01:00.1: [10de:0e0a] type 00 class 0x040300
    [    0.340516] pci 0000:01:00.1: reg 0x10: [mem 0xec080000-0xec083fff]
    [    0.356848] pci 0000:00:01.0: PCI bridge to [bus 01]
    [    0.356912] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
    [    0.356914] pci 0000:00:01.0:   bridge window [mem 0xeb000000-0xec0fffff]
    [    0.356917] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
    [    0.356962] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [    0.357089] pci 0000:03:00.0: [10ec:5289] type 00 class 0xff0000
    [    0.357107] pci 0000:03:00.0: reg 0x10: [mem 0xec200000-0xec20ffff]
    [    0.357245] pci 0000:03:00.0: supports D1 D2
    [    0.357246] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
    [    0.357273] pci 0000:03:00.0: System wakeup disabled by ACPI
    [    0.357382] pci 0000:03:00.2: [10ec:8168] type 00 class 0x020000
    [    0.357400] pci 0000:03:00.2: reg 0x10: [io  0xd000-0xd0ff]
    [    0.357426] pci 0000:03:00.2: reg 0x18: [mem 0xd2104000-0xd2104fff 64bit pref]
    [    0.357443] pci 0000:03:00.2: reg 0x20: [mem 0xd2100000-0xd2103fff 64bit pref]
    [    0.357524] pci 0000:03:00.2: supports D1 D2
    [    0.357525] pci 0000:03:00.2: PME# supported from D0 D1 D2 D3hot D3cold
    [    0.357550] pci 0000:03:00.2: System wakeup disabled by ACPI
    [    0.376883] pci 0000:00:1c.2: PCI bridge to [bus 03]
    [    0.376948] pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
    [    0.376950] pci 0000:00:1c.2:   bridge window [mem 0xec200000-0xec2fffff]
    [    0.376954] pci 0000:00:1c.2:   bridge window [mem 0xd2100000-0xd21fffff 64bit pref]
    [    0.377024] pci 0000:04:00.0: [8086:08b3] type 00 class 0x028000
    [    0.377061] pci 0000:04:00.0: reg 0x10: [mem 0xec100000-0xec101fff 64bit]
    [    0.377248] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
    [    0.377277] pci 0000:04:00.0: System wakeup disabled by ACPI
    [    0.396915] pci 0000:00:1c.3: PCI bridge to [bus 04]
    [    0.396980] pci 0000:00:1c.3:   bridge window [mem 0xec100000-0xec1fffff]
    [    0.397031] pci 0000:00:1c.4: PCI bridge to [bus 05-3d]
    [    0.397097] pci 0000:00:1c.4:   bridge window [mem 0xd4000000-0xea0fffff]
    [    0.397102] pci 0000:00:1c.4:   bridge window [mem 0x90000000-0xb1ffffff 64bit pref]
    [    0.397132] pci_bus 0000:00: on NUMA node 0
    [    0.397133] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
    [    0.397723] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
    [    0.398317] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
    [    0.398908] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 10 11 12 14 15)
    [    0.399500] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
    [    0.400090] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [    0.400774] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [    0.401458] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
    [    0.402047] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
    [    0.402815] ACPI: Enabled 5 GPEs in block 00 to 3F
    [    0.402996] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    [    0.403119] vgaarb: setting as boot device: PCI:0000:01:00.0
    [    0.403183] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [    0.403250] vgaarb: loaded
    [    0.403309] vgaarb: bridge control possible 0000:01:00.0
    [    0.403425] SCSI subsystem initialized
    [    0.403550] PCI: Using ACPI for IRQ routing
    [    0.406428] PCI: pci_cache_line_size set to 64 bytes
    [    0.406477] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
    [    0.406478] e820: reserve RAM buffer [mem 0x7d21f000-0x7fffffff]
    [    0.406479] e820: reserve RAM buffer [mem 0x7d981000-0x7fffffff]
    [    0.406480] e820: reserve RAM buffer [mem 0x8dc0b000-0x8fffffff]
    [    0.406481] e820: reserve RAM buffer [mem 0x8e676000-0x8fffffff]
    [    0.406482] e820: reserve RAM buffer [mem 0x8f000000-0x8fffffff]
    [    0.406483] e820: reserve RAM buffer [mem 0x46f000000-0x46fffffff]
    [    0.406620] Switched to clocksource hpet
    [    0.406765] pnp: PnP ACPI init
    [    0.406882] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
    [    0.406962] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
    [    0.407099] system 00:01: [io  0x0680-0x069f] has been reserved
    [    0.407165] system 00:01: [io  0xffff] has been reserved
    [    0.407228] system 00:01: [io  0xffff] has been reserved
    [    0.407292] system 00:01: [io  0xffff] has been reserved
    [    0.407355] system 00:01: [io  0x1c00-0x1cfe] has been reserved
    [    0.407420] system 00:01: [io  0x1d00-0x1dfe] has been reserved
    [    0.407484] system 00:01: [io  0x1e00-0x1efe] has been reserved
    [    0.407549] system 00:01: [io  0x1f00-0x1ffe] has been reserved
    [    0.407614] system 00:01: [io  0x1800-0x18fe] could not be reserved
    [    0.407679] system 00:01: [io  0x164e-0x164f] has been reserved
    [    0.407743] system 00:01: [io  0x3322-0x3323] has been reserved
    [    0.407808] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.407832] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
    [    0.407867] system 00:03: [io  0x1854-0x1857] has been reserved
    [    0.407934] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [    0.407955] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
    [    0.408014] pnp 00:05: Plug and Play ACPI device, IDs SYN1212 PNP0f13 (active)
    [    0.408049] system 00:06: [io  0x04d0-0x04d1] has been reserved
    [    0.408115] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.408389] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [    0.408456] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
    [    0.408522] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
    [    0.408587] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
    [    0.408653] system 00:07: [mem 0xf0000000-0xf7ffffff] has been reserved
    [    0.408719] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
    [    0.408784] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
    [    0.408850] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
    [    0.408915] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
    [    0.408981] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
    [    0.409047] system 00:07: [mem 0xeffdf000-0xeffdffff] has been reserved
    [    0.409113] system 00:07: [mem 0xeffe0000-0xeffeffff] has been reserved
    [    0.409179] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.409307] pnp: PnP ACPI: found 8 devices
    [    0.415358] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
    [    0.415360] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
    [    0.415361] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
    [    0.415378] pci 0000:00:1c.4: bridge window [io  0x1000-0x0fff] to [bus 05-3d] add_size 1000
    [    0.415382] pci 0000:00:1c.0: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
    [    0.415383] pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [    0.415384] pci 0000:00:1c.0: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
    [    0.415385] pci 0000:00:1c.4: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
    [    0.415390] pci 0000:00:1c.0: BAR 8: assigned [mem 0xb2000000-0xb21fffff]
    [    0.415461] pci 0000:00:1c.0: BAR 9: assigned [mem 0xb2200000-0xb23fffff 64bit pref]
    [    0.415529] pci 0000:00:1c.0: BAR 7: assigned [io  0x2000-0x2fff]
    [    0.415594] pci 0000:00:1c.4: BAR 7: assigned [io  0x4000-0x4fff]
    [    0.415659] pci 0000:00:01.0: PCI bridge to [bus 01]
    [    0.415722] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
    [    0.415788] pci 0000:00:01.0:   bridge window [mem 0xeb000000-0xec0fffff]
    [    0.415855] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
    [    0.415923] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [    0.415987] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
    [    0.416055] pci 0000:00:1c.0:   bridge window [mem 0xb2000000-0xb21fffff]
    [    0.416122] pci 0000:00:1c.0:   bridge window [mem 0xb2200000-0xb23fffff 64bit pref]
    [    0.416193] pci 0000:00:1c.2: PCI bridge to [bus 03]
    [    0.416256] pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
    [    0.416323] pci 0000:00:1c.2:   bridge window [mem 0xec200000-0xec2fffff]
    [    0.416390] pci 0000:00:1c.2:   bridge window [mem 0xd2100000-0xd21fffff 64bit pref]
    [    0.416461] pci 0000:00:1c.3: PCI bridge to [bus 04]
    [    0.416526] pci 0000:00:1c.3:   bridge window [mem 0xec100000-0xec1fffff]
    [    0.416596] pci 0000:00:1c.4: PCI bridge to [bus 05-3d]
    [    0.416676] pci 0000:00:1c.4:   bridge window [io  0x4000-0x4fff]
    [    0.416743] pci 0000:00:1c.4:   bridge window [mem 0xd4000000-0xea0fffff]
    [    0.416810] pci 0000:00:1c.4:   bridge window [mem 0x90000000-0xb1ffffff 64bit pref]
    [    0.416882] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
    [    0.416883] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
    [    0.416884] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [    0.416885] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
    [    0.416886] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
    [    0.416887] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
    [    0.416888] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
    [    0.416889] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
    [    0.416890] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
    [    0.416891] pci_bus 0000:00: resource 13 [mem 0x90000000-0xfeafffff]
    [    0.416892] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
    [    0.416893] pci_bus 0000:01: resource 1 [mem 0xeb000000-0xec0fffff]
    [    0.416894] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
    [    0.416895] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
    [    0.416896] pci_bus 0000:02: resource 1 [mem 0xb2000000-0xb21fffff]
    [    0.416897] pci_bus 0000:02: resource 2 [mem 0xb2200000-0xb23fffff 64bit pref]
    [    0.416898] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
    [    0.416899] pci_bus 0000:03: resource 1 [mem 0xec200000-0xec2fffff]
    [    0.416900] pci_bus 0000:03: resource 2 [mem 0xd2100000-0xd21fffff 64bit pref]
    [    0.416901] pci_bus 0000:04: resource 1 [mem 0xec100000-0xec1fffff]
    [    0.416902] pci_bus 0000:05: resource 0 [io  0x4000-0x4fff]
    [    0.416903] pci_bus 0000:05: resource 1 [mem 0xd4000000-0xea0fffff]
    [    0.416904] pci_bus 0000:05: resource 2 [mem 0x90000000-0xb1ffffff 64bit pref]
    [    0.416950] NET: Registered protocol family 2
    [    0.417161] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    [    0.417341] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [    0.417503] TCP: Hash tables configured (established 131072 bind 65536)
    [    0.417579] TCP: reno registered
    [    0.417641] UDP hash table entries: 8192 (order: 6, 262144 bytes)
    [    0.417733] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
    [    0.417877] NET: Registered protocol family 1
    [    0.418174] PCI: CLS mismatch (64 != 128), using 64 bytes
    [    0.418273] pci 0000:01:00.0: Video device with shadowed ROM
    [    0.418309] Trying to unpack rootfs image as initramfs...
    [    0.771148] Freeing initrd memory: 3776K (ffff880037890000 - ffff880037c40000)
    [    0.771223] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [    0.771289] software IO TLB [mem 0x89c0b000-0x8dc0b000] (64MB) mapped at [ffff880089c0b000-ffff88008dc0afff]
    [    0.771646] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
    [    0.772034] futex hash table entries: 2048 (order: 5, 131072 bytes)
    [    0.772140] audit: initializing netlink subsys (disabled)
    [    0.772217] audit: type=2000 audit(1431319303.760:1): initialized
    [    0.772549] VFS: Disk quotas dquot_6.5.2
    [    0.772628] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [    0.772875] squashfs: version 4.0 (2009/01/31) Phillip Lougher
    [    0.772994] SGI XFS with ACLs, security attributes, realtime, no debug enabled
    [    0.773289] ocfs2: Registered cluster interface o2cb
    [    0.773379] OCFS2 User DLM kernel interface loaded
    [    0.773700] gfs2: GFS2 installed
    [    0.773925] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    [    0.773995] io scheduler noop registered
    [    0.774058] io scheduler deadline registered
    [    0.774132] io scheduler cfq registered (default)
    [    0.774716] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
    [    0.775056] Linux agpgart interface v0.103
    [    0.776063] brd: module loaded
    [    0.776576] loop: module loaded
    [    0.776706] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:SYNM] at 0x60,0x64 irq 1,12
    [    1.300562] i8042: Detected active multiplexing controller, rev 1.1
    [    1.302515] serio: i8042 KBD port at 0x60,0x64 irq 1
    [    1.302579] serio: i8042 AUX0 port at 0x60,0x64 irq 12
    [    1.302643] serio: i8042 AUX1 port at 0x60,0x64 irq 12
    [    1.302706] serio: i8042 AUX2 port at 0x60,0x64 irq 12
    [    1.302769] serio: i8042 AUX3 port at 0x60,0x64 irq 12
    [    1.302909] mousedev: PS/2 mouse device common for all mice
    [    1.303055] hidraw: raw HID events driver (C) Jiri Kosina
    [    1.303321] TCP: cubic registered
    [    1.303383] NET: Registered protocol family 17
    [    1.303752] registered taskstats version 1
    [    1.304401] Freeing unused kernel memory: 824K (ffffffff816d3000 - ffffffff817a1000)
    [    1.306349] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [    1.372753] libata version 3.00 loaded.
    [    1.480809] ahci 0000:00:1f.2: version 3.0
    [    1.480926] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
    [    1.480949] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0xf impl SATA mode
    [    1.480951] ahci 0000:00:1f.2: flags: 64bit ncq stag led clo pio slum part ems sxs apst 
    [    1.538592] scsi host0: ahci
    [    1.538676] scsi host1: ahci
    [    1.538763] scsi host2: ahci
    [    1.538843] scsi host3: ahci
    [    1.538914] scsi host4: ahci
    [    1.538994] scsi host5: ahci
    [    1.539035] ata1: SATA max UDMA/133 abar m2048@0xec316000 port 0xec316100 irq 25
    [    1.539037] ata2: SATA max UDMA/133 abar m2048@0xec316000 port 0xec316180 irq 25
    [    1.539039] ata3: SATA max UDMA/133 abar m2048@0xec316000 port 0xec316200 irq 25
    [    1.539041] ata4: SATA max UDMA/133 abar m2048@0xec316000 port 0xec316280 irq 25
    [    1.539042] ata5: DUMMY
    [    1.539042] ata6: DUMMY
    [    1.768266] tsc: Refined TSC clocksource calibration: 2793.531 MHz
    [    1.898442] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [    1.899572] ata1.00: ATA-8: HGST HTS721010A9E630, JB0OA3J0, max UDMA/133
    [    1.899573] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [    1.900803] ata1.00: configured for UDMA/133
    [    1.900870] scsi 0:0:0:0: Direct-Access     ATA      HGST HTS721010A9 A3J0 PQ: 0 ANSI: 5
    [    1.901020] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
    [    1.901022] sd 0:0:0:0: [sda] 4096-byte physical blocks
    [    1.901065] sd 0:0:0:0: [sda] Write Protect is off
    [    1.901068] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [    1.901089] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    1.964550]  sda: sda1 sda2
    [    1.964731] sd 0:0:0:0: [sda] Attached SCSI disk
    [    2.308929] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [    2.309902] ata2.00: ATA-8: Hitachi HTS545032B9SA02, PB3AC60W, max UDMA/133
    [    2.309904] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [    2.311951] ata2.00: configured for UDMA/133
    [    2.312005] scsi 1:0:0:0: Direct-Access     ATA      Hitachi HTS54503 C60W PQ: 0 ANSI: 5
    [    2.312133] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
    [    2.312165] sd 1:0:0:0: [sdb] Write Protect is off
    [    2.312167] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    [    2.312183] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    2.330562]  sdb: sdb1 sdb2
    [    2.330727] sd 1:0:0:0: [sdb] Attached SCSI disk
    [    2.649327] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [    2.652940] ata3.00: ATAPI: TSSTcorp CDDVDW SN-208FB, TC00, max UDMA/100
    [    2.655511] ata3.00: configured for UDMA/100
    [    2.656820] scsi 2:0:0:0: CD-ROM            TSSTcorp CDDVDW SN-208FB  TC00 PQ: 0 ANSI: 5
    [    2.703475] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [    2.703476] cdrom: Uniform CD-ROM driver Revision: 3.20
    [    2.703551] sr 2:0:0:0: Attached scsi CD-ROM sr0
    [    2.750265] psmouse serio2: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00223/0x840300/0x122c00, board id: 1760, fw id: 1211538
    [    2.769505] Switched to clocksource tsc
    [    2.790276] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input6
    [    3.049807] ata4: SATA link down (SStatus 0 SControl 300)
    [    3.122315] sd 0:0:0:0: Attached scsi generic sg0 type 0
    [    3.122342] sd 1:0:0:0: Attached scsi generic sg1 type 0
    [    3.122365] sr 2:0:0:0: Attached scsi generic sg2 type 5
    [    3.210066] scsi: <fdomain> Detection failed (no card)
    [    3.321203] GDT-HA: Storage RAID Controller Driver. Version: 3.05
    [    3.375644] imm: Version 2.05 (for Linux 2.4.0)
    [    3.542862] Fusion MPT base driver 3.04.20
    [    3.542864] Copyright (c) 1999-2008 LSI Corporation
    [    3.571385] Fusion MPT SPI Host driver 3.04.20
    [    3.589431] Fusion MPT FC Host driver 3.04.20
    [    3.608042] Fusion MPT SAS Host driver 3.04.20
    [    3.623069] 3ware Storage Controller device driver for Linux v1.26.02.003.
    [    3.637181] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
    [    3.652697] HP CISS Driver (v 3.6.26)
    [    3.697811] Adaptec aacraid driver 1.2-0[30300]-ms
    [    3.731067] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
    [    3.731920] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
    [    3.763226] megasas: 06.805.06.01-rc1
    [    3.780850] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.16-k.
    [    3.810999] Emulex LightPulse Fibre Channel SCSI driver 10.4.8000.0.
    [    3.811000] Copyright(c) 2004-2014 Emulex.  All rights reserved.
    [    3.850286] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
    [    4.639356] ACPI: bus type USB registered
    [    4.639376] usbcore: registered new interface driver usbfs
    [    4.639386] usbcore: registered new interface driver hub
    [    4.639407] usbcore: registered new device driver usb
    [    4.640608] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    4.668757] usbcore: registered new interface driver usb-storage
    [    4.694013] uhci_hcd: USB Universal Host Controller Interface driver
    [    4.719226] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [    4.770215] usbcore: registered new interface driver usbhid
    [    4.770216] usbhid: USB HID core driver
    [    5.025915] device-mapper: uevent: version 1.0.3
    [    5.025959] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com
    [    5.246223] md: raid0 personality registered for level 0
    [    5.273988] md: raid1 personality registered for level 1
    [    5.310228] async_tx: api initialized (async)
    [    5.482693] raid6: sse2x1    8589 MB/s
    [    5.652891] raid6: sse2x2   11271 MB/s
    [    5.823095] raid6: sse2x4   13191 MB/s
    [    5.993298] raid6: avx2x1   16774 MB/s
    [    6.163500] raid6: avx2x2   20158 MB/s
    [    6.333704] raid6: avx2x4   23136 MB/s
    [    6.333705] raid6: using algorithm avx2x4 (23136 MB/s)
    [    6.333706] raid6: using avx2x2 recovery algorithm
    [    6.350226] xor: automatically using best checksumming function:
    [    6.443834]    avx       : 28139.200 MB/sec
    [    6.448850] md: raid6 personality registered for level 6
    [    6.448851] md: raid5 personality registered for level 5
    [    6.448851] md: raid4 personality registered for level 4
    [    6.479809] md: raid10 personality registered for level 10
    [    6.508992] md: linear personality registered for level -1
    [    6.538163] md: multipath personality registered for level -4
    [    6.589563] Btrfs loaded
    [    6.620635] JFS: nTxBlock = 8192, nTxLock = 65536
    [    6.664501] RPC: Registered named UNIX socket transport module.
    [    6.664503] RPC: Registered udp transport module.
    [    6.664503] RPC: Registered tcp transport module.
    [    6.664504] RPC: Registered tcp NFSv4.1 backchannel transport module.
    [    6.702001] fuse init (API version 7.23)
    [    6.745178] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
    [    6.745179] e1000: Copyright (c) 1999-2006 Intel Corporation.
    [    6.782997] pps_core: LinuxPPS API ver. 1 registered
    [    6.782998] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
    [    6.783835] PTP clock support registered
    [    6.833499] Loading iSCSI transport class v2.0-870.
    [    7.093021] UDF-fs: warning (device sdb2): udf_fill_super: No partition found (2)
    [    7.099587] (mount,15222,0):ocfs2_fill_super:1054 ERROR: superblock probe failed!
    [    7.099589] (mount,15222,0):ocfs2_fill_super:1245 ERROR: status = -22
    [    7.099697] gfs2: gfs2 mount does not exist
    [    7.099785] BTRFS: device fsid 59b3eb07-79cd-4973-ab94-ae247a4de533 devid 1 transid 2105 /dev/sdb2
    [    7.100040] BTRFS info (device sdb2): disk space caching is enabled
    [   10.700239] udevd[15617]: starting version 1.5.3
    [   10.906437] random: udevd urandom read with 70 bits of entropy available
    [   11.611284] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input9
    [   11.611316] ACPI: Power Button [PWRB]
    [   11.611354] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input10
    [   11.611376] ACPI: Sleep Button [SLPB]
    [   11.611414] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input11
    [   11.611465] ACPI: Lid Switch [LID0]
    [   11.611503] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input12
    [   11.611535] ACPI: Power Button [PWRF]
    [   11.611921] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
    [   11.611924] ACPI: Battery Slot [BAT0] (battery present)
    [   11.699601] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
    [   11.699636] ACPI: AC Adapter [AC] (off-line)
    [   11.811464] cfg80211: Calling CRDA to update world regulatory domain
    [   11.857685] Monitor-Mwait will be used to enter C-1 state
    [   11.857691] Monitor-Mwait will be used to enter C-2 state
    [   11.857697] ACPI: acpi_idle registered with cpuidle
    [   11.864870] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [   11.864876] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
    [   11.864952] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
    [   11.865034] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
    [   11.865036] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [   11.865037] usb usb1: Product: xHCI Host Controller
    [   11.865039] usb usb1: Manufacturer: Linux 3.19.3-1~exp1 xhci-hcd
    [   11.865039] usb usb1: SerialNumber: 0000:00:14.0
    [   11.865146] hub 1-0:1.0: USB hub found
    [   11.865164] hub 1-0:1.0: 14 ports detected
    [   11.867811] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [   11.867814] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
    [   11.867887] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
    [   11.867889] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [   11.867890] usb usb2: Product: xHCI Host Controller
    [   11.867891] usb usb2: Manufacturer: Linux 3.19.3-1~exp1 xhci-hcd
    [   11.867892] usb usb2: SerialNumber: 0000:00:14.0
    [   11.867992] hub 2-0:1.0: USB hub found
    [   11.868005] hub 2-0:1.0: 6 ports detected
    [   11.870872] ehci-pci: EHCI PCI platform driver
    [   11.870959] ehci-pci 0000:00:1a.0: EHCI Host Controller
    [   11.870964] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
    [   11.870974] ehci-pci 0000:00:1a.0: debug port 2
    [   11.874888] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
    [   11.874900] ehci-pci 0000:00:1a.0: irq 16, io mem 0xec318000
    [   11.890355] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [   11.890401] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
    [   11.890403] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [   11.890404] usb usb3: Product: EHCI Host Controller
    [   11.890405] usb usb3: Manufacturer: Linux 3.19.3-1~exp1 ehci_hcd
    [   11.890406] usb usb3: SerialNumber: 0000:00:1a.0
    [   11.890508] hub 3-0:1.0: USB hub found
    [   11.890528] hub 3-0:1.0: 2 ports detected
    [   11.890766] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [   11.890771] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
    [   11.890781] ehci-pci 0000:00:1d.0: debug port 2
    [   11.894687] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [   11.894697] ehci-pci 0000:00:1d.0: irq 23, io mem 0xec317000
    [   11.910390] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [   11.910465] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
    [   11.910467] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [   11.910468] usb usb4: Product: EHCI Host Controller
    [   11.910469] usb usb4: Manufacturer: Linux 3.19.3-1~exp1 ehci_hcd
    [   11.910470] usb usb4: SerialNumber: 0000:00:1d.0
    [   11.910595] hub 4-0:1.0: USB hub found
    [   11.910603] hub 4-0:1.0: 2 ports detected
    [   11.991552] thermal LNXTHERM:00: registered as thermal_zone0
    [   11.991554] ACPI: Thermal Zone [TZ0] (49 C)
    [   12.099829] microcode: CPU0 sig=0x306c3, pf=0x10, revision=0x17
    [   12.132590] platform microcode: firmware: failed to load intel-ucode/06-3c-03 (-2)
    [   12.132617] microcode: CPU1 sig=0x306c3, pf=0x10, revision=0x17
    [   12.132625] platform microcode: firmware: failed to load intel-ucode/06-3c-03 (-2)
    [   12.132645] microcode: CPU2 sig=0x306c3, pf=0x10, revision=0x17
    [   12.132651] platform microcode: firmware: failed to load intel-ucode/06-3c-03 (-2)
    [   12.132657] microcode: CPU3 sig=0x306c3, pf=0x10, revision=0x17
    [   12.132663] platform microcode: firmware: failed to load intel-ucode/06-3c-03 (-2)
    [   12.132670] microcode: CPU4 sig=0x306c3, pf=0x10, revision=0x17
    [   12.132677] platform microcode: firmware: failed to load intel-ucode/06-3c-03 (-2)
    [   12.132697] microcode: CPU5 sig=0x306c3, pf=0x10, revision=0x17
    [   12.132702] platform microcode: firmware: failed to load intel-ucode/06-3c-03 (-2)
    [   12.132722] microcode: CPU6 sig=0x306c3, pf=0x10, revision=0x17
    [   12.132727] platform microcode: firmware: failed to load intel-ucode/06-3c-03 (-2)
    [   12.132734] microcode: CPU7 sig=0x306c3, pf=0x10, revision=0x17
    [   12.132739] platform microcode: firmware: failed to load intel-ucode/06-3c-03 (-2)
    [   12.132799] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
    [   12.189153] input: PC Speaker as /devices/platform/pcspkr/input/input13
    [   12.190719] usb 1-3: new full-speed USB device number 2 using xhci_hcd
    [   12.193805] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [   12.193811] r8169 0000:03:00.2: can't disable ASPM; OS doesn't have ASPM control
    [   12.194521] r8169 0000:03:00.2 eth0: RTL8411 at 0xffffc9000931e000, 80:fa:5b:01:6d:12, XID 08800800 IRQ 27
    [   12.194522] r8169 0000:03:00.2 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
    [   12.220786] usb 3-1: new high-speed USB device number 2 using ehci-pci
    [   12.230796] usb 4-1: new high-speed USB device number 2 using ehci-pci
    [   12.332453] usb 1-3: New USB device found, idVendor=1c7a, idProduct=0603
    [   12.332456] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    [   12.332458] usb 1-3: Product: EgisTec_ES603
    [   12.332459] usb 1-3: Manufacturer: EgisTec
    [   12.370796] ACPI: Video Device [PEGP] (multi-head: yes  rom: no  post: no)
    [   12.371284] usb 3-1: New USB device found, idVendor=8087, idProduct=8008
    [   12.371286] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    [   12.371438] hub 3-1:1.0: USB hub found
    [   12.371530] hub 3-1:1.0: 6 ports detected
    [   12.382010] Intel(R) Wireless WiFi driver for Linux, in-tree:
    [   12.382011] Copyright(c) 2003- 2014 Intel Corporation
    [   12.461042] usb 1-7: new full-speed USB device number 3 using xhci_hcd
    [   12.489514] snd_hda_intel 0000:01:00.1: Disabling MSI
    [   12.607956] ACPI Warning: SystemIO range 0x000000000000f000-0x000000000000f01f conflicts with OpRegion 0x000000000000f000-0x000000000000f00f (\_SB_.PCI0.SBUS.SMBI) (20141107/utaddress-258)
    [   12.607961] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [   12.608106] acpi device:02: registered as cooling_device8
    [   12.608225] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input14
    [   12.608569] usb 4-1: New USB device found, idVendor=8087, idProduct=8000
    [   12.608571] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    [   12.609651] hub 4-1:1.0: USB hub found
    [   12.609692] hub 4-1:1.0: 8 ports detected
    [   12.612070] usb 1-7: New USB device found, idVendor=8087, idProduct=07dc
    [   12.612073] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    [   12.671846] [drm] Initialized drm 1.1.0 20060810
    [   12.682778] sound hdaudioC0D0: autoconfig: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:line
    [   12.682780] sound hdaudioC0D0:    speaker_outs=1 (0x14/0x0/0x0/0x0/0x0)
    [   12.682781] sound hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
    [   12.682782] sound hdaudioC0D0:    mono: mono_out=0x0
    [   12.682783] sound hdaudioC0D0:    dig-out=0x1e/0x0
    [   12.682784] sound hdaudioC0D0:    inputs:
    [   12.682785] sound hdaudioC0D0:      Mic=0x18
    [   12.682787] sound hdaudioC0D0:      Internal Mic=0x12
    [   12.682788] sound hdaudioC0D0:      Line=0x1a
    [   12.690624] random: nonblocking pool is initialized
    [   12.849800] iwlwifi 0000:04:00.0: firmware: direct-loading firmware iwlwifi-3160-12.ucode
    [   12.849929] iwlwifi 0000:04:00.0: loaded firmware version 25.15.12.0 op_mode iwlmvm
    [   13.131871] sound hdaudioC1D0: autoconfig: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line
    [   13.131874] sound hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
    [   13.131875] sound hdaudioC1D0:    hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
    [   13.131876] sound hdaudioC1D0:    mono: mono_out=0x0
    [   13.131877] sound hdaudioC1D0:    dig-out=0x5/0x7
    [   13.131877] sound hdaudioC1D0:    inputs:
    [   13.138817] Bluetooth: Core ver 2.20
    [   13.138824] NET: Registered protocol family 31
    [   13.138824] Bluetooth: HCI device and connection manager initialized
    [   13.138827] Bluetooth: HCI socket layer initialized
    [   13.138829] Bluetooth: L2CAP socket layer initialized
    [   13.138830] Bluetooth: SCO socket layer initialized
    [   13.320704] nvidia: module license 'NVIDIA' taints kernel.
    [   13.320706] Disabling lock debugging due to kernel taint
    [   13.327873] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
    [   13.328089] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0
    [   13.328092] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  349.16  Wed Apr  8 00:17:22 PDT 2015
    [   13.348503] usbcore: registered new interface driver btusb
    [   13.361119] Bluetooth: hci0: read Intel version: 370710010002030d00
    [   13.362988] iwlwifi 0000:04:00.0: Detected Intel(R) Dual Band Wireless AC 3160, REV=0x164
    [   13.363035] iwlwifi 0000:04:00.0: L1 Disabled - LTR Disabled
    [   13.363258] iwlwifi 0000:04:00.0: L1 Disabled - LTR Disabled
    [   13.422969] bluetooth hci0: firmware: direct-loading firmware intel/ibt-hw-37.7.10-fw-1.0.2.3.d.bseq
    [   13.422974] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.0.2.3.d.bseq
    [   13.550323] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
    [   13.593299] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
    [   13.749580] cfg80211: World regulatory domain updated:
    [   13.749581] cfg80211:  DFS Master region: unset
    [   13.749582] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
    [   13.749584] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
    [   13.749586] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
    [   13.749587] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
    [   13.749588] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
    [   13.749589] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
    [   13.749591] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
    [   13.749592] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
    [   13.749593] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
    [   13.930671] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
    [   13.930699] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
    [   13.930715] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
    [   13.930738] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
    [   13.930754] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
    [   13.930779] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
    [   13.930795] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
    [   13.930809] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
    [   14.102525] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
    [   14.102573] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
    [   14.403935] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
    [   15.692052] BTRFS info (device sdb2): disk space caching is enabled
    [   15.828348] Adding 4194300k swap on /dev/sda2.  Priority:-1 extents:1 across:4194300k 
    [   18.690891] iwlwifi 0000:04:00.0: L1 Disabled - LTR Disabled
    [   18.691115] iwlwifi 0000:04:00.0: L1 Disabled - LTR Disabled
    [   19.204186] r8169 0000:03:00.2: firmware: direct-loading firmware rtl_nic/rtl8411-1.fw
    [   19.302150] r8169 0000:03:00.2 eth0: link down
    [   19.467653] NET: Registered protocol family 10
    [   19.467881] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [   19.467909] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [   23.341273] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
    [   23.341308] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
    [   23.341324] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
    [   23.341348] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
    [   23.341363] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
    [   23.341389] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
    [   23.341404] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
    [   23.341419] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
    [   23.404482] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
    [   23.404519] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
    [   23.455530] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
    [  110.137496] wlan0: authenticate with 28:cf:da:b0:d2:68
    [  110.140943] wlan0: send auth to 28:cf:da:b0:d2:68 (try 1/3)
    [  110.141366] wlan0: authenticated
    [  110.147906] wlan0: associate with 28:cf:da:b0:d2:68 (try 1/3)
    [  110.148762] wlan0: RX AssocResp from 28:cf:da:b0:d2:68 (capab=0x511 status=0 aid=2)
    [  110.149982] wlan0: associated
    [  110.150010] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [  110.150063] cfg80211: Calling CRDA for country: US
    [  110.150140] wlan0: deauthenticating from 28:cf:da:b0:d2:68 by local choice (Reason: 3=DEAUTH_LEAVING)
    [  110.152463] cfg80211: Calling CRDA to update world regulatory domain
    [  110.153960] cfg80211: World regulatory domain updated:
    [  110.153962] cfg80211:  DFS Master region: unset
    [  110.153962] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
    [  110.153964] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
    [  110.153966] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
    [  110.153967] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
    [  110.153968] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
    [  110.153970] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
    [  110.153971] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
    [  110.153972] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
    [  110.153973] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
    [  116.689880] wlan0: authenticate with 28:cf:da:b0:d2:67
    [  116.692713] wlan0: send auth to 28:cf:da:b0:d2:67 (try 1/3)
    [  116.694480] wlan0: authenticated
    [  116.695712] wlan0: associate with 28:cf:da:b0:d2:67 (try 1/3)
    [  116.699189] wlan0: RX AssocResp from 28:cf:da:b0:d2:67 (capab=0x431 status=0 aid=11)
    [  116.699909] wlan0: associated
    [  116.699971] cfg80211: Calling CRDA for country: US
    [  116.700018] wlan0: deauthenticating from 28:cf:da:b0:d2:67 by local choice (Reason: 3=DEAUTH_LEAVING)
    [  116.702181] cfg80211: Calling CRDA to update world regulatory domain
    [  116.703515] cfg80211: World regulatory domain updated:
    [  116.703516] cfg80211:  DFS Master region: unset
    [  116.703517] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
    [  116.703519] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
    [  116.703520] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
    [  116.703521] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
    [  116.703523] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
    [  116.703524] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
    [  116.703525] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
    [  116.703526] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
    [  116.703528] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
    [  123.239152] wlan0: authenticate with 28:cf:da:b0:d2:68
    [  123.241905] wlan0: send auth to 28:cf:da:b0:d2:68 (try 1/3)
    [  123.243069] wlan0: authenticated
    [  123.243523] wlan0: associate with 28:cf:da:b0:d2:68 (try 1/3)
    [  123.245457] wlan0: RX AssocResp from 28:cf:da:b0:d2:68 (capab=0x511 status=0 aid=2)
    [  123.246390] wlan0: associated
    [  123.246434] cfg80211: Calling CRDA for country: US
    [  123.246499] wlan0: deauthenticating from 28:cf:da:b0:d2:68 by local choice (Reason: 3=DEAUTH_LEAVING)
    [  123.248903] cfg80211: Calling CRDA to update world regulatory domain
    [  123.250252] cfg80211: World regulatory domain updated:
    [  123.250253] cfg80211:  DFS Master region: unset
    [  123.250254] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
    [  123.250256] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
    [  123.250257] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
    [  123.250258] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
    [  123.250260] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
    [  123.250261] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
    [  123.250262] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
    [  123.250263] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
    [  123.250264] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
    [  129.786691] wlan0: authenticate with 28:cf:da:b0:d2:67
    [  129.788633] wlan0: send auth to 28:cf:da:b0:d2:67 (try 1/3)
    [  129.790312] wlan0: authenticated
    [  129.796933] wlan0: associate with 28:cf:da:b0:d2:67 (try 1/3)
    [  129.803723] wlan0: RX AssocResp from 28:cf:da:b0:d2:67 (capab=0x431 status=0 aid=11)
    [  129.804083] wlan0: associated
    [  129.804144] cfg80211: Calling CRDA for country: US
    [  129.804213] wlan0: deauthenticating from 28:cf:da:b0:d2:67 by local choice (Reason: 3=DEAUTH_LEAVING)
    [  129.806516] cfg80211: Regulatory domain changed to country: US
    [  129.806518] cfg80211:  DFS Master region: unset
    [  129.806519] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
    [  129.806520] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
    [  129.806522] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A)
    [  129.806523] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
    [  129.806525] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2300 mBm), (0 s)
    [  129.806526] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
    [  129.806527] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
    [  129.806670] cfg80211: Calling CRDA to update world regulatory domain
    [  129.807841] cfg80211: World regulatory domain updated:
    [  129.807842] cfg80211:  DFS Master region: unset
    [  129.807843] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
    [  129.807845] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
    [  129.807846] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
    [  129.807847] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
    [  129.807848] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
    [  129.807850] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
    [  129.807851] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
    [  129.807852] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
    [  129.807853] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
    [  134.686477] traps: gom-flickr-mine[17586] trap int3 ip:7fed6f1bf13a sp:7ffc9307c680 error:0
    [  220.219398] wlan0: authenticate with 3c:ea:4f:d2:0d:f9
    [  220.221881] wlan0: send auth to 3c:ea:4f:d2:0d:f9 (try 1/3)
    [  220.223513] wlan0: authenticated
    [  220.223651] iwlwifi 0000:04:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
    [  220.223653] iwlwifi 0000:04:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
    [  220.229536] wlan0: associate with 3c:ea:4f:d2:0d:f9 (try 1/3)
    [  220.231657] wlan0: RX AssocResp from 3c:ea:4f:d2:0d:f9 (capab=0x431 status=0 aid=1)
    [  220.233003] wlan0: associated
    [  220.233054] cfg80211: Calling CRDA for country: US
    [  220.233101] wlan0: deauthenticating from 3c:ea:4f:d2:0d:f9 by local choice (Reason: 3=DEAUTH_LEAVING)
    [  220.236192] cfg80211: Calling CRDA to update world regulatory domain
    [  220.237488] cfg80211: World regulatory domain updated:
    [  220.237489] cfg80211:  DFS Master region: unset
    [  220.237490] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
    [  220.237492] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
    [  220.237493] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
    [  220.237494] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
    [  220.237495] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
    [  220.237497] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
    [  220.237498] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
    [  220.237499] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
    [  220.237500] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
    [  229.972901] wlan0: authenticate with 3c:ea:4f:d2:0d:f9
    [  229.975122] wlan0: send auth to 3c:ea:4f:d2:0d:f9 (try 1/3)
    [  229.976758] wlan0: authenticated
    [  229.976884] iwlwifi 0000:04:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
    [  229.976885] iwlwifi 0000:04:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
    [  229.981195] wlan0: associate with 3c:ea:4f:d2:0d:f9 (try 1/3)
    [  229.983406] wlan0: RX AssocResp from 3c:ea:4f:d2:0d:f9 (capab=0x431 status=0 aid=1)
    [  229.984668] wlan0: associated
    [  229.984720] cfg80211: Calling CRDA for country: US
    [  229.984774] wlan0: deauthenticating from 3c:ea:4f:d2:0d:f9 by local choice (Reason: 3=DEAUTH_LEAVING)
    [  229.988174] cfg80211: Calling CRDA to update world regulatory domain
    [  229.989758] cfg80211: World regulatory domain updated:
    [  229.989759] cfg80211:  DFS Master region: unset
    [  229.989760] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
    [  229.989762] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
    [  229.989763] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
    [  229.989764] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
    [  229.989766] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
    [  229.989767] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
    [  229.989768] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
    [  229.989769] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
    [  229.989770] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
    [  252.525068] traps: gom-flickr-mine[17734] trap int3 ip:7f62f4ea513a sp:7fff001a4cf0 error:0
    
    

    Thanks again!


  6. Hey everyone,

     

    I am very close on my installation. I built my kernel using genkernel. All the necessary drivers are, as far as I can tell, loading appropriately. I am typing this from my Ubuntu install, however, because I have no internet in Funtoo. The driver modules for both the ethernet and wifi are loading and I am even able to scan for wireless networks; however, I cannot connect to any networks. Any ideas? Let me know if you need any output.

     

    thanks in advance!

    -Hunter A.

×
×
  • Create New...