allen286

I fixed it! The solution was to build NetworkManager 1.0.2 from source. Worked like a charm! Thank you all for your input, and cheers! -Hunter a.

Ok - I have recompiled the kernel with the driver back as a module. I think this is not a firmware problem... Watching the dmesg, it appears to connect, authenticate, and promptly disconnect: [ 123.239152] wlan0: authenticate with 28:cf:da:b0:d2:68 [ 123.241905] wlan0: send auth to 28:cf:da:b0:d2:68 (try 1/3) [ 123.243069] wlan0: authenticated [ 123.243523] wlan0: associate with 28:cf:da:b0:d2:68 (try 1/3) [ 123.245457] wlan0: RX AssocResp from 28:cf:da:b0:d2:68 (capab=0x511 status=0 aid=2) [ 123.246390] wlan0: associated [ 123.246434] cfg80211: Calling CRDA for country: US [ 123.246499] wlan0: deauthenticating from 28:cf:da:b0:d2:68 by local choice (Reason: 3=DEAUTH_LEAVING) [ 123.248903] cfg80211: Calling CRDA to update world regulatory domain Any advice for this one?

Unfortunately, I did post the exact message... However, I did figure it out. I managed to get the (*) in the correct spots in genkernel, but the problem has been made worse by this... Now the driver does not load. Here's my new dmesg output: [ 0.000000] Normal [mem 0x0000000100000000-0x000000046effffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000007d21efff] [ 0.000000] node 0: [mem 0x000000007d226000-0x000000007d980fff] [ 0.000000] node 0: [mem 0x000000007dbee000-0x000000008dc0afff] [ 0.000000] node 0: [mem 0x000000008e10b000-0x000000008e675fff] [ 0.000000] node 0: [mem 0x000000008efff000-0x000000008effffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000046effffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000046effffff] [ 0.000000] On node 0 totalpages: 4181663 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7893 pages used for memmap [ 0.000000] DMA32 zone: 577283 pages, LIFO batch:31 [ 0.000000] Normal zone: 49224 pages used for memmap [ 0.000000] Normal zone: 3600384 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x7d21f000-0x7d225fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7d981000-0x7dbedfff] [ 0.000000] PM: Registered nosave memory: [mem 0x8dc0b000-0x8e10afff] [ 0.000000] PM: Registered nosave memory: [mem 0x8e676000-0x8e7aafff] [ 0.000000] PM: Registered nosave memory: [mem 0x8e7ab000-0x8effefff] [ 0.000000] PM: Registered nosave memory: [mem 0x8f000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0x8f000000-0xefffffff] available for PCI devices [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88046ec00000 s78488 r8192 d32104 u262144 [ 0.000000] pcpu-alloc: s78488 r8192 d32104 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4124469 [ 0.000000] Kernel command line: BOOT_IMAGE=/kernel-genkernel-x86_64-4.0.2-gentoo root=/dev/sdb2 [ 0.000000] log_buf_len individual max cpu contribution: 4096 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 28672 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 65536 bytes [ 0.000000] early log buf free: 20076(61%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form [ 0.000000] AGP: Checking aperture... [ 0.000000] AGP: No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 16388148K/16726652K available (7379K kernel code, 415K rwdata, 2316K rodata, 844K init, 836K bss, 338504K reserved, 0K cma-reserved) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Additional per-CPU info printed with stalls. [ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS:4352 nr_irqs:488 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2793.339 MHz processor [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5586.67 BogoMIPS (lpj=27933390) [ 0.000131] pid_max: default: 32768 minimum: 301 [ 0.000197] ACPI: Core revision 20150204 [ 0.008360] ACPI: All ACPI Tables successfully acquired [ 0.018121] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.018187] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.018444] CPU: Physical Processor ID: 0 [ 0.018505] CPU: Processor Core ID: 0 [ 0.018568] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.018633] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.019523] mce: CPU supports 9 MCE banks [ 0.019596] CPU0: Thermal monitoring enabled (TM1) [ 0.019665] process: using mwait in idle threads [ 0.019730] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.019795] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.019958] Freeing SMP alternatives memory: 32K (ffffffff81ab7000 - ffffffff81abf000) [ 0.020381] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.120566] TSC deadline timer enabled [ 0.120568] smpboot: CPU0: Intel(R) Core(TM) i7-4810MQ CPU @ 2.80GHz (fam: 06, model: 3c, stepping: 03) [ 0.120795] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver. [ 0.121118] ... version: 3 [ 0.121179] ... bit width: 48 [ 0.121241] ... generic registers: 4 [ 0.121303] ... value mask: 0000ffffffffffff [ 0.121366] ... max period: 0000ffffffffffff [ 0.121430] ... fixed-purpose events: 3 [ 0.121491] ... event mask: 000000070000000f [ 0.121753] x86: Booting SMP configuration: [ 0.121815] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.220926] x86: Booted up 1 node, 8 CPUs [ 0.221048] smpboot: Total of 8 processors activated (44693.42 BogoMIPS) [ 0.226770] devtmpfs: initialized [ 0.227010] PM: Registering ACPI NVS region [mem 0x7d21f000-0x7d225fff] (28672 bytes) [ 0.227079] PM: Registering ACPI NVS region [mem 0x8e676000-0x8e7aafff] (1265664 bytes) [ 0.227284] xor: automatically using best checksumming function: [ 0.326769] avx : 24949.600 MB/sec [ 0.326924] NET: Registered protocol family 16 [ 0.386867] cpuidle: using governor ladder [ 0.466976] cpuidle: using governor menu [ 0.470002] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.470068] ACPI: bus type PCI registered [ 0.470193] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) [ 0.470275] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820 [ 0.470408] PCI: Using configuration type 1 for base access [ 0.717295] raid6: sse2x1 8545 MB/s [ 0.887502] raid6: sse2x2 11055 MB/s [ 1.057707] raid6: sse2x4 13120 MB/s [ 1.227910] raid6: avx2x1 16688 MB/s [ 1.398117] raid6: avx2x2 19710 MB/s [ 1.568320] raid6: avx2x4 22943 MB/s [ 1.568381] raid6: using algorithm avx2x4 (22943 MB/s) [ 1.568443] raid6: using avx2x2 recovery algorithm [ 1.568547] ACPI: Added _OSI(Module Device) [ 1.568609] ACPI: Added _OSI(Processor Device) [ 1.568670] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.568732] ACPI: Added _OSI(Processor Aggregator Device) [ 1.571526] ACPI: Executed 1 blocks of module-level executable AML code [ 1.573639] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 1.574357] ACPI: Dynamic OEM Table Load: [ 1.574512] ACPI: SSDT 0xFFFF88045DD78400 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711) [ 1.575174] ACPI: Dynamic OEM Table Load: [ 1.575329] ACPI: SSDT 0xFFFF88045D8F3000 0005AA (v01 PmRef ApIst 00003000 INTL 20120711) [ 1.576028] ACPI: Dynamic OEM Table Load: [ 1.576183] ACPI: SSDT 0xFFFF88045DED8C00 000119 (v01 PmRef ApCst 00003000 INTL 20120711) [ 1.581199] ACPI: Interpreter enabled [ 1.581267] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150204/hwxface-580) [ 1.581443] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150204/hwxface-580) [ 1.581627] ACPI: (supports S0 S3 S4 S5) [ 1.581689] ACPI: Using IOAPIC for interrupt routing [ 1.581773] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.587850] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e]) [ 1.587918] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 1.588086] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME] [ 1.588241] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability] [ 1.588478] PCI host bridge to bus 0000:00 [ 1.588541] pci_bus 0000:00: root bus resource [bus 00-7e] [ 1.588605] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 1.588672] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 1.588737] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 1.588805] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 1.588871] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 1.588939] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 1.589005] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 1.589072] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] [ 1.589139] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] [ 1.589206] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfeafffff window] [ 1.589278] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000 [ 1.589349] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400 [ 1.589379] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 1.589413] pci 0000:00:01.0: System wakeup disabled by ACPI [ 1.589534] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 1.589551] pci 0000:00:14.0: reg 0x10: [mem 0xec300000-0xec30ffff 64bit] [ 1.589606] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 1.589633] pci 0000:00:14.0: System wakeup disabled by ACPI [ 1.589731] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 1.589748] pci 0000:00:16.0: reg 0x10: [mem 0xec31a000-0xec31a00f 64bit] [ 1.589807] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 1.589874] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 1.589892] pci 0000:00:1a.0: reg 0x10: [mem 0xec318000-0xec3183ff] [ 1.589974] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 1.590012] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 1.590112] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300 [ 1.590126] pci 0000:00:1b.0: reg 0x10: [mem 0xec310000-0xec313fff 64bit] [ 1.590189] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 1.590217] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 1.590313] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 1.590375] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 1.590404] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 1.590501] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400 [ 1.590563] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 1.590592] pci 0000:00:1c.2: System wakeup disabled by ACPI [ 1.590688] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 [ 1.590749] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 1.590779] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 1.590874] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 [ 1.590943] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 1.590973] pci 0000:00:1c.4: System wakeup disabled by ACPI [ 1.591075] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 1.591093] pci 0000:00:1d.0: reg 0x10: [mem 0xec317000-0xec3173ff] [ 1.591175] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 1.591212] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 1.591311] pci 0000:00:1f.0: [8086:8c4b] type 00 class 0x060100 [ 1.591458] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601 [ 1.591471] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077] [ 1.591477] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063] [ 1.591483] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057] [ 1.591489] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043] [ 1.591495] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] [ 1.591501] pci 0000:00:1f.2: reg 0x24: [mem 0xec316000-0xec3167ff] [ 1.591535] pci 0000:00:1f.2: PME# supported from D3hot [ 1.591589] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 1.591601] pci 0000:00:1f.3: reg 0x10: [mem 0xec315000-0xec3150ff 64bit] [ 1.591618] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 1.591714] pci 0000:01:00.0: [10de:119a] type 00 class 0x030000 [ 1.591724] pci 0000:01:00.0: reg 0x10: [mem 0xeb000000-0xebffffff] [ 1.591734] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref] [ 1.591743] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref] [ 1.591750] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f] [ 1.591756] pci 0000:01:00.0: reg 0x30: [mem 0xec000000-0xec07ffff pref] [ 1.591810] pci 0000:01:00.0: System wakeup disabled by ACPI [ 1.591909] pci 0000:01:00.1: [10de:0e0a] type 00 class 0x040300 [ 1.591919] pci 0000:01:00.1: reg 0x10: [mem 0xec080000-0xec083fff] [ 1.608382] pci 0000:00:01.0: PCI bridge to [bus 01] [ 1.608446] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 1.608448] pci 0000:00:01.0: bridge window [mem 0xeb000000-0xec0fffff] [ 1.608450] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref] [ 1.608494] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 1.608623] pci 0000:03:00.0: [10ec:5289] type 00 class 0xff0000 [ 1.608641] pci 0000:03:00.0: reg 0x10: [mem 0xec200000-0xec20ffff] [ 1.608780] pci 0000:03:00.0: supports D1 D2 [ 1.608781] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold [ 1.608808] pci 0000:03:00.0: System wakeup disabled by ACPI [ 1.608915] pci 0000:03:00.2: [10ec:8168] type 00 class 0x020000 [ 1.608933] pci 0000:03:00.2: reg 0x10: [io 0xd000-0xd0ff] [ 1.608960] pci 0000:03:00.2: reg 0x18: [mem 0xd2104000-0xd2104fff 64bit pref] [ 1.608976] pci 0000:03:00.2: reg 0x20: [mem 0xd2100000-0xd2103fff 64bit pref] [ 1.609057] pci 0000:03:00.2: supports D1 D2 [ 1.609058] pci 0000:03:00.2: PME# supported from D0 D1 D2 D3hot D3cold [ 1.609084] pci 0000:03:00.2: System wakeup disabled by ACPI [ 1.628412] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 1.628476] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff] [ 1.628478] pci 0000:00:1c.2: bridge window [mem 0xec200000-0xec2fffff] [ 1.628482] pci 0000:00:1c.2: bridge window [mem 0xd2100000-0xd21fffff 64bit pref] [ 1.628553] pci 0000:04:00.0: [8086:08b3] type 00 class 0x028000 [ 1.628589] pci 0000:04:00.0: reg 0x10: [mem 0xec100000-0xec101fff 64bit] [ 1.628775] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 1.628805] pci 0000:04:00.0: System wakeup disabled by ACPI [ 1.648436] pci 0000:00:1c.3: PCI bridge to [bus 04] [ 1.648502] pci 0000:00:1c.3: bridge window [mem 0xec100000-0xec1fffff] [ 1.648551] pci 0000:00:1c.4: PCI bridge to [bus 05-3d] [ 1.648618] pci 0000:00:1c.4: bridge window [mem 0xd4000000-0xea0fffff] [ 1.648622] pci 0000:00:1c.4: bridge window [mem 0x90000000-0xb1ffffff 64bit pref] [ 1.648651] pci_bus 0000:00: on NUMA node 0 [ 1.648652] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported) [ 1.649245] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 1.649838] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) [ 1.650429] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 10 11 12 14 15) [ 1.651018] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15) [ 1.651607] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 1.652291] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 1.652971] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15) [ 1.653559] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15) [ 1.654325] ACPI: Enabled 5 GPEs in block 00 to 3F [ 1.654504] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 1.654620] vgaarb: setting as boot device: PCI:0000:01:00.0 [ 1.654684] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 1.654751] vgaarb: loaded [ 1.654810] vgaarb: bridge control possible 0000:01:00.0 [ 1.654927] SCSI subsystem initialized [ 1.655008] pps_core: LinuxPPS API ver. 1 registered [ 1.655070] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 1.655155] PTP clock support registered [ 1.655273] PCI: Using ACPI for IRQ routing [ 1.658136] PCI: pci_cache_line_size set to 64 bytes [ 1.658184] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 1.658185] e820: reserve RAM buffer [mem 0x7d21f000-0x7fffffff] [ 1.658186] e820: reserve RAM buffer [mem 0x7d981000-0x7fffffff] [ 1.658187] e820: reserve RAM buffer [mem 0x8dc0b000-0x8fffffff] [ 1.658188] e820: reserve RAM buffer [mem 0x8e676000-0x8fffffff] [ 1.658189] e820: reserve RAM buffer [mem 0x8f000000-0x8fffffff] [ 1.658190] e820: reserve RAM buffer [mem 0x46f000000-0x46fffffff] [ 1.658287] NET: Registered protocol family 23 [ 1.658403] cfg80211: Calling CRDA to update world regulatory domain [ 1.658547] Switched to clocksource hpet [ 1.660059] pnp: PnP ACPI init [ 1.660172] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ 1.660240] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 1.660377] system 00:01: [io 0x0680-0x069f] has been reserved [ 1.660443] system 00:01: [io 0xffff] has been reserved [ 1.660507] system 00:01: [io 0xffff] has been reserved [ 1.660573] system 00:01: [io 0xffff] has been reserved [ 1.660637] system 00:01: [io 0x1c00-0x1cfe] has been reserved [ 1.660701] system 00:01: [io 0x1d00-0x1dfe] has been reserved [ 1.660765] system 00:01: [io 0x1e00-0x1efe] has been reserved [ 1.660830] system 00:01: [io 0x1f00-0x1ffe] has been reserved [ 1.660894] system 00:01: [io 0x1800-0x18fe] could not be reserved [ 1.660959] system 00:01: [io 0x164e-0x164f] has been reserved [ 1.661023] system 00:01: [io 0x3322-0x3323] has been reserved [ 1.661088] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.661111] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.661148] system 00:03: [io 0x1854-0x1857] has been reserved [ 1.661215] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 1.661237] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active) [ 1.661297] pnp 00:05: Plug and Play ACPI device, IDs SYN1212 PNP0f13 (active) [ 1.661333] system 00:06: [io 0x04d0-0x04d1] has been reserved [ 1.661400] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.661677] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 1.661745] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved [ 1.661810] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved [ 1.661875] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved [ 1.661941] system 00:07: [mem 0xf0000000-0xf7ffffff] has been reserved [ 1.662010] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved [ 1.662075] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved [ 1.662141] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved [ 1.662206] system 00:07: [mem 0xff000000-0xffffffff] has been reserved [ 1.662272] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved [ 1.662337] system 00:07: [mem 0xeffdf000-0xeffdffff] has been reserved [ 1.662403] system 00:07: [mem 0xeffe0000-0xeffeffff] has been reserved [ 1.662469] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.662598] pnp: PnP ACPI: found 8 devices [ 1.667202] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000 [ 1.667203] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 [ 1.667205] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 [ 1.667221] pci 0000:00:1c.4: bridge window [io 0x1000-0x0fff] to [bus 05-3d] add_size 1000 [ 1.667224] pci 0000:00:1c.0: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 [ 1.667225] pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 1.667227] pci 0000:00:1c.0: res[7]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 1.667228] pci 0000:00:1c.4: res[7]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 1.667232] pci 0000:00:1c.0: BAR 8: assigned [mem 0xb2000000-0xb21fffff] [ 1.667303] pci 0000:00:1c.0: BAR 9: assigned [mem 0xb2200000-0xb23fffff 64bit pref] [ 1.667371] pci 0000:00:1c.0: BAR 7: assigned [io 0x2000-0x2fff] [ 1.667436] pci 0000:00:1c.4: BAR 7: assigned [io 0x4000-0x4fff] [ 1.667502] pci 0000:00:01.0: PCI bridge to [bus 01] [ 1.667566] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 1.667631] pci 0000:00:01.0: bridge window [mem 0xeb000000-0xec0fffff] [ 1.667698] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref] [ 1.667766] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 1.667829] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 1.667896] pci 0000:00:1c.0: bridge window [mem 0xb2000000-0xb21fffff] [ 1.667963] pci 0000:00:1c.0: bridge window [mem 0xb2200000-0xb23fffff 64bit pref] [ 1.668033] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 1.668097] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff] [ 1.668163] pci 0000:00:1c.2: bridge window [mem 0xec200000-0xec2fffff] [ 1.668230] pci 0000:00:1c.2: bridge window [mem 0xd2100000-0xd21fffff 64bit pref] [ 1.668301] pci 0000:00:1c.3: PCI bridge to [bus 04] [ 1.668366] pci 0000:00:1c.3: bridge window [mem 0xec100000-0xec1fffff] [ 1.668450] pci 0000:00:1c.4: PCI bridge to [bus 05-3d] [ 1.668517] pci 0000:00:1c.4: bridge window [io 0x4000-0x4fff] [ 1.668596] pci 0000:00:1c.4: bridge window [mem 0xd4000000-0xea0fffff] [ 1.668663] pci 0000:00:1c.4: bridge window [mem 0x90000000-0xb1ffffff 64bit pref] [ 1.668734] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 1.668736] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 1.668737] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 1.668738] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window] [ 1.668739] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window] [ 1.668740] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window] [ 1.668741] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window] [ 1.668742] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window] [ 1.668743] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window] [ 1.668744] pci_bus 0000:00: resource 13 [mem 0x90000000-0xfeafffff window] [ 1.668745] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 1.668746] pci_bus 0000:01: resource 1 [mem 0xeb000000-0xec0fffff] [ 1.668747] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref] [ 1.668748] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 1.668749] pci_bus 0000:02: resource 1 [mem 0xb2000000-0xb21fffff] [ 1.668751] pci_bus 0000:02: resource 2 [mem 0xb2200000-0xb23fffff 64bit pref] [ 1.668752] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] [ 1.668753] pci_bus 0000:03: resource 1 [mem 0xec200000-0xec2fffff] [ 1.668754] pci_bus 0000:03: resource 2 [mem 0xd2100000-0xd21fffff 64bit pref] [ 1.668755] pci_bus 0000:04: resource 1 [mem 0xec100000-0xec1fffff] [ 1.668756] pci_bus 0000:05: resource 0 [io 0x4000-0x4fff] [ 1.668757] pci_bus 0000:05: resource 1 [mem 0xd4000000-0xea0fffff] [ 1.668758] pci_bus 0000:05: resource 2 [mem 0x90000000-0xb1ffffff 64bit pref] [ 1.668804] NET: Registered protocol family 2 [ 1.669007] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.669187] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.669351] TCP: Hash tables configured (established 131072 bind 65536) [ 1.669428] TCP: reno registered [ 1.669489] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 1.669581] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 1.669727] NET: Registered protocol family 1 [ 1.670022] PCI: CLS mismatch (64 != 128), using 64 bytes [ 1.670122] pci 0000:01:00.0: Video device with shadowed ROM [ 1.670160] Trying to unpack rootfs image as initramfs... [ 1.983220] Freeing initrd memory: 3320K (ffff880037974000 - ffff880037cb2000) [ 1.983293] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.983359] software IO TLB [mem 0x89c0b000-0x8dc0b000] (64MB) mapped at [ffff880089c0b000-ffff88008dc0afff] [ 1.983723] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer [ 1.984116] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 1.984221] audit: initializing netlink subsys (disabled) [ 1.984295] audit: type=2000 audit(1431401823.980:1): initialized [ 1.984617] VFS: Disk quotas dquot_6.5.2 [ 1.984698] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.984937] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.985054] SGI XFS with ACLs, security attributes, realtime, no debug enabled [ 1.985335] ocfs2: Registered cluster interface o2cb [ 1.985424] OCFS2 User DLM kernel interface loaded [ 1.985756] gfs2: GFS2 installed [ 1.986141] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 1.986212] io scheduler noop registered [ 1.986275] io scheduler deadline registered [ 1.986349] io scheduler cfq registered (default) [ 1.986948] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.987325] Linux agpgart interface v0.103 [ 1.988573] brd: module loaded [ 1.989464] loop: module loaded [ 1.989561] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 1.992293] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.992371] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 1.992439] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 1.992518] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [ 1.992583] e1000e: Copyright(c) 1999 - 2014 Intel Corporation. [ 1.992660] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.2.15-k [ 1.992728] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.992805] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.0.2-k [ 1.992873] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 1.992949] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.0.1-k [ 1.993017] ixgbe: Copyright (c) 1999-2014 Intel Corporation. [ 1.993093] ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver - version 2.12.1-k [ 1.993177] ixgbevf: Copyright (c) 2009 - 2012 Intel Corporation. [ 1.993252] i40e: Intel(R) Ethernet Connection XL710 Network Driver - version 1.2.6-k [ 1.993321] i40e: Copyright (c) 2013 - 2014 Intel Corporation. [ 1.993397] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI [ 1.993465] ixgb: Copyright (c) 1999-2008 Intel Corporation. [ 1.993540] i40evf: Intel(R) XL710/X710 Virtual Function Network Driver - version 1.2.0 [ 1.993609] Copyright (c) 2013 - 2014 Intel Corporation. [ 1.993684] Intel(R) Ethernet Switch Host Interface Driver - version 0.12.2-k [ 1.993752] Copyright (c) 2013 Intel Corporation. [ 1.993866] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.993934] r8169 0000:03:00.2: can't disable ASPM; OS doesn't have ASPM control [ 1.994679] r8169 0000:03:00.2 eth0: RTL8411 at 0xffffc90000026000, 80:fa:5b:01:6d:12, XID 08800800 IRQ 25 [ 1.994762] r8169 0000:03:00.2 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 1.994856] ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2 [ 1.994923] ipw2100: Copyright(c) 2003-2006 Intel Corporation [ 1.995001] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kq [ 1.995068] ipw2200: Copyright(c) 2003-2006 Intel Corporation [ 1.995145] libipw: 802.11 data/management/control stack, git-1.1.13 [ 1.995212] libipw: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com> [ 1.995307] Intel(R) Wireless WiFi driver for Linux [ 1.995372] Copyright(c) 2003- 2014 Intel Corporation [ 1.995584] iwl4965: Intel(R) Wireless WiFi 4965 driver for Linux, in-tree:d [ 1.995652] iwl4965: Copyright(c) 2003-2011 Intel Corporation [ 1.995728] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:ds [ 1.995811] iwl3945: Copyright(c) 2003-2011 Intel Corporation [ 1.995923] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:SYNM] at 0x60,0x64 irq 1,12 [ 2.519045] i8042: Detected active multiplexing controller, rev 1.1 [ 2.521310] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.521375] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 2.521438] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 2.521501] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 2.521564] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 2.521663] iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-3160-12.ucode failed with error -2 [ 2.521699] mousedev: PS/2 mouse device common for all mice [ 2.521801] hidraw: raw HID events driver (C) Jiri Kosina [ 2.521958] iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-3160-11.ucode failed with error -2 [ 2.522030] TCP: cubic registered [ 2.522032] NET: Registered protocol family 17 [ 2.522068] NET: Registered protocol family 33 [ 2.522072] Key type rxrpc registered [ 2.522072] Key type rxrpc_s registered [ 2.522082] lib80211: common routines for IEEE802.11 drivers [ 2.522083] lib80211_crypt: registered algorithm 'NULL' [ 2.522085] lib80211_crypt: registered algorithm 'WEP' [ 2.522087] lib80211_crypt: registered algorithm 'CCMP' [ 2.522088] lib80211_crypt: registered algorithm 'TKIP' [ 2.522099] 9pnet: Installing 9P2000 support [ 2.522451] registered taskstats version 1 [ 2.522602] iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-3160-10.ucode failed with error -2 [ 2.522689] iwlwifi 0000:04:00.0: request for firmware file 'iwlwifi-3160-10.ucode' failed. [ 2.522769] iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-3160-9.ucode failed with error -2 [ 2.522862] iwlwifi 0000:04:00.0: request for firmware file 'iwlwifi-3160-9.ucode' failed. [ 2.522940] iwlwifi 0000:04:00.0: no suitable firmware found! [ 2.523066] Btrfs loaded [ 2.523770] Freeing unused kernel memory: 844K (ffffffff819e4000 - ffffffff81ab7000) [ 2.525038] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 2.589796] libata version 3.00 loaded. [ 2.775569] ahci 0000:00:1f.2: version 3.0 [ 2.775688] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 2.775711] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0xf impl SATA mode [ 2.775713] ahci 0000:00:1f.2: flags: 64bit ncq stag led clo pio slum part ems sxs apst [ 2.930731] scsi host0: ahci [ 2.930824] scsi host1: ahci [ 2.930912] scsi host2: ahci [ 2.930997] scsi host3: ahci [ 2.931082] scsi host4: ahci [ 2.931168] scsi host5: ahci [ 2.931222] ata1: SATA max UDMA/133 abar m2048@0xec316000 port 0xec316100 irq 26 [ 2.931224] ata2: SATA max UDMA/133 abar m2048@0xec316000 port 0xec316180 irq 26 [ 2.931226] ata3: SATA max UDMA/133 abar m2048@0xec316000 port 0xec316200 irq 26 [ 2.931227] ata4: SATA max UDMA/133 abar m2048@0xec316000 port 0xec316280 irq 26 [ 2.931228] ata5: DUMMY [ 2.931229] ata6: DUMMY [ 3.010214] tsc: Refined TSC clocksource calibration: 2793.531 MHz [ 3.350586] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3.351717] ata1.00: ATA-8: HGST HTS721010A9E630, JB0OA3J0, max UDMA/133 [ 3.351719] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3.352951] ata1.00: configured for UDMA/133 [ 3.353024] scsi 0:0:0:0: Direct-Access ATA HGST HTS721010A9 A3J0 PQ: 0 ANSI: 5 [ 3.353163] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 3.353166] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 3.353205] sd 0:0:0:0: [sda] Write Protect is off [ 3.353208] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.353231] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.637281] sda: sda1 sda2 [ 3.637463] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.721050] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.722046] ata2.00: ATA-8: Hitachi HTS545032B9SA02, PB3AC60W, max UDMA/133 [ 3.722047] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3.723169] ata2.00: configured for UDMA/133 [ 3.723224] scsi 1:0:0:0: Direct-Access ATA Hitachi HTS54503 C60W PQ: 0 ANSI: 5 [ 3.723355] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 3.723386] sd 1:0:0:0: [sdb] Write Protect is off [ 3.723388] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.723403] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.733717] psmouse serio2: synaptics: queried max coordinates: x [..5662], y [..4660] [ 3.743674] sdb: sdb1 sdb2 [ 3.743859] sd 1:0:0:0: [sdb] Attached SCSI disk [ 3.849335] psmouse serio2: synaptics: queried min coordinates: x [1280..], y [1194..] [ 3.998254] psmouse serio2: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00223/0x840300/0x122c00, board id: 1760, fw id: 1211538 [ 4.011423] Switched to clocksource tsc [ 4.035856] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input4 [ 4.071462] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4.075158] ata3.00: ATAPI: TSSTcorp CDDVDW SN-208FB, TC00, max UDMA/100 [ 4.078184] ata3.00: configured for UDMA/100 [ 4.079606] scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW SN-208FB TC00 PQ: 0 ANSI: 5 [ 4.095515] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 4.095516] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 4.095605] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 4.441900] ata4: SATA link down (SStatus 0 SControl 300) [ 4.512705] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 4.512731] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 4.512754] sr 2:0:0:0: Attached scsi generic sg2 type 5 [ 4.597917] scsi: <fdomain> Detection failed (no card) [ 4.713010] GDT-HA: Storage RAID Controller Driver. Version: 3.05 [ 4.765628] imm: Version 2.05 (for Linux 2.4.0) [ 4.943498] Fusion MPT base driver 3.04.20 [ 4.943499] Copyright (c) 1999-2008 LSI Corporation [ 4.971319] Fusion MPT SPI Host driver 3.04.20 [ 4.989095] Fusion MPT FC Host driver 3.04.20 [ 5.007323] Fusion MPT SAS Host driver 3.04.20 [ 5.021946] 3ware Storage Controller device driver for Linux v1.26.02.003. [ 5.035819] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014. [ 5.050874] HP CISS Driver (v 3.6.26) [ 5.094971] Adaptec aacraid driver 1.2-0[30300]-ms [ 5.127182] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) [ 5.128035] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) [ 5.158575] megasas: 06.806.08.00-rc1 [ 5.175974] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.16-k. [ 5.205538] Emulex LightPulse Fibre Channel SCSI driver 10.4.8000.0. [ 5.205539] Copyright(c) 2004-2014 Emulex. All rights reserved. [ 5.244130] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded [ 6.006264] ACPI: bus type USB registered [ 6.006287] usbcore: registered new interface driver usbfs [ 6.006298] usbcore: registered new interface driver hub [ 6.006319] usbcore: registered new device driver usb [ 6.007782] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 6.045059] usbcore: registered new interface driver usb-storage [ 6.071657] uhci_hcd: USB Universal Host Controller Interface driver [ 6.096957] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 6.147599] usbcore: registered new interface driver usbhid [ 6.147600] usbhid: USB HID core driver [ 6.395365] device-mapper: uevent: version 1.0.3 [ 6.395408] device-mapper: ioctl: 4.30.0-ioctl (2014-12-22) initialised: dm-devel@redhat.com [ 6.609425] md: raid0 personality registered for level 0 [ 6.636061] md: raid1 personality registered for level 1 [ 6.670114] async_tx: api initialized (async) [ 6.685225] md: raid6 personality registered for level 6 [ 6.685226] md: raid5 personality registered for level 5 [ 6.685227] md: raid4 personality registered for level 4 [ 6.715091] md: raid10 personality registered for level 10 [ 6.742925] md: linear personality registered for level -1 [ 6.771441] md: multipath personality registered for level -4 [ 6.817020] JFS: nTxBlock = 8192, nTxLock = 65536 [ 6.858953] RPC: Registered named UNIX socket transport module. [ 6.858954] RPC: Registered udp transport module. [ 6.858955] RPC: Registered tcp transport module. [ 6.858955] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 6.894536] fuse init (API version 7.23) [ 6.987129] Loading iSCSI transport class v2.0-870. [ 7.237872] UDF-fs: warning (device sdb2): udf_fill_super: No partition found (2) [ 7.244395] (mount,14810,0):ocfs2_fill_super:1026 ERROR: superblock probe failed! [ 7.244396] (mount,14810,0):ocfs2_fill_super:1217 ERROR: status = -22 [ 7.244506] gfs2: gfs2 mount does not exist [ 7.244593] BTRFS: device fsid 59b3eb07-79cd-4973-ab94-ae247a4de533 devid 1 transid 2498 /dev/sdb2 [ 7.244858] BTRFS info (device sdb2): disk space caching is enabled [ 10.155269] udevd[15044]: starting version 1.5.3 [ 10.350015] random: udevd urandom read with 63 bits of entropy available [ 11.104721] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 11.104759] ACPI: AC Adapter [AC] (on-line) [ 11.105297] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input15 [ 11.105330] ACPI: Power Button [PWRB] [ 11.105365] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input16 [ 11.105387] ACPI: Sleep Button [SLPB] [ 11.105452] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input17 [ 11.105503] ACPI: Lid Switch [LID0] [ 11.105544] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input18 [ 11.105566] ACPI: Power Button [PWRF] [ 11.105851] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 11.105854] ACPI: Battery Slot [BAT0] (battery present) [ 11.242598] ehci-pci: EHCI PCI platform driver [ 11.242711] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 11.242717] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 11.242727] ehci-pci 0000:00:1a.0: debug port 2 [ 11.246616] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 11.246628] ehci-pci 0000:00:1a.0: irq 16, io mem 0xec318000 [ 11.260050] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 11.260096] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 11.260098] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 11.260099] usb usb1: Product: EHCI Host Controller [ 11.260100] usb usb1: Manufacturer: Linux 4.0.2-gentoo ehci_hcd [ 11.260101] usb usb1: SerialNumber: 0000:00:1a.0 [ 11.260215] hub 1-0:1.0: USB hub found [ 11.260222] hub 1-0:1.0: 2 ports detected [ 11.260405] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 11.260410] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 11.260420] ehci-pci 0000:00:1d.0: debug port 2 [ 11.264306] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 11.264317] ehci-pci 0000:00:1d.0: irq 23, io mem 0xec317000 [ 11.280073] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 11.280112] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 11.280114] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 11.280115] usb usb2: Product: EHCI Host Controller [ 11.280117] usb usb2: Manufacturer: Linux 4.0.2-gentoo ehci_hcd [ 11.280117] usb usb2: SerialNumber: 0000:00:1d.0 [ 11.280218] hub 2-0:1.0: USB hub found [ 11.280224] hub 2-0:1.0: 2 ports detected [ 11.314427] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 11.314432] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 11.314498] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810 [ 11.314503] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 11.314574] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 11.314576] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 11.314577] usb usb3: Product: xHCI Host Controller [ 11.314578] usb usb3: Manufacturer: Linux 4.0.2-gentoo xhci-hcd [ 11.314579] usb usb3: SerialNumber: 0000:00:14.0 [ 11.314677] hub 3-0:1.0: USB hub found [ 11.314694] hub 3-0:1.0: 14 ports detected [ 11.317356] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 11.317359] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 11.317406] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 11.317407] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 11.317409] usb usb4: Product: xHCI Host Controller [ 11.317410] usb usb4: Manufacturer: Linux 4.0.2-gentoo xhci-hcd [ 11.317410] usb usb4: SerialNumber: 0000:00:14.0 [ 11.317512] hub 4-0:1.0: USB hub found [ 11.317524] hub 4-0:1.0: 6 ports detected [ 11.379021] [drm] Initialized drm 1.1.0 20060810 [ 11.435122] snd_hda_intel 0000:01:00.1: Disabling MSI [ 11.470198] ACPI Warning: SystemIO range 0x000000000000f000-0x000000000000f01f conflicts with OpRegion 0x000000000000f000-0x000000000000f00f (\_SB_.PCI0.SBUS.SMBI) (20150204/utaddress-258) [ 11.470202] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 11.471102] thermal LNXTHERM:00: registered as thermal_zone0 [ 11.471103] ACPI: Thermal Zone [TZ0] (51 C) [ 11.471104] Monitor-Mwait will be used to enter C-1 state [ 11.471110] Monitor-Mwait will be used to enter C-2 state [ 11.471117] ACPI: acpi_idle registered with cpuidle [ 11.471143] ACPI: Video Device [PEGP] (multi-head: yes rom: no post: no) [ 11.580421] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 11.596942] sound hdaudioC0D0: autoconfig for ALC892: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:line [ 11.596944] sound hdaudioC0D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0) [ 11.596945] sound hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 11.596946] sound hdaudioC0D0: mono: mono_out=0x0 [ 11.596947] sound hdaudioC0D0: dig-out=0x1e/0x0 [ 11.596948] sound hdaudioC0D0: inputs: [ 11.596950] sound hdaudioC0D0: Mic=0x18 [ 11.596951] sound hdaudioC0D0: Internal Mic=0x12 [ 11.596952] sound hdaudioC0D0: Line=0x1a [ 11.600447] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 11.630483] usb 3-3: new full-speed USB device number 2 using xhci_hcd [ 11.708524] acpi device:02: registered as cooling_device5 [ 11.708723] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input19 [ 11.730994] usb 1-1: New USB device found, idVendor=8087, idProduct=8008 [ 11.730996] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 11.731142] hub 1-1:1.0: USB hub found [ 11.731242] hub 1-1:1.0: 6 ports detected [ 11.751017] usb 2-1: New USB device found, idVendor=8087, idProduct=8000 [ 11.751019] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 11.751167] hub 2-1:1.0: USB hub found [ 11.751266] hub 2-1:1.0: 8 ports detected [ 11.772260] usb 3-3: New USB device found, idVendor=1c7a, idProduct=0603 [ 11.772262] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 11.772263] usb 3-3: Product: EgisTec_ES603 [ 11.772264] usb 3-3: Manufacturer: EgisTec [ 11.779221] input: PC Speaker as /devices/platform/pcspkr/input/input20 [ 11.888256] microcode: CPU0 sig=0x306c3, pf=0x10, revision=0x17 [ 11.890814] usb 3-7: new full-speed USB device number 3 using xhci_hcd [ 11.911015] microcode: CPU1 sig=0x306c3, pf=0x10, revision=0x17 [ 11.911040] microcode: CPU2 sig=0x306c3, pf=0x10, revision=0x17 [ 11.911063] microcode: CPU3 sig=0x306c3, pf=0x10, revision=0x17 [ 11.911075] microcode: CPU4 sig=0x306c3, pf=0x10, revision=0x17 [ 11.911087] microcode: CPU5 sig=0x306c3, pf=0x10, revision=0x17 [ 11.911110] microcode: CPU6 sig=0x306c3, pf=0x10, revision=0x17 [ 11.911134] microcode: CPU7 sig=0x306c3, pf=0x10, revision=0x17 [ 11.911182] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 12.031918] usb 3-7: New USB device found, idVendor=8087, idProduct=07dc [ 12.031920] usb 3-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 12.050998] sound hdaudioC1D0: autoconfig for ID 40: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line [ 12.051000] sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 12.051002] sound hdaudioC1D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 12.051003] sound hdaudioC1D0: mono: mono_out=0x0 [ 12.051004] sound hdaudioC1D0: dig-out=0x5/0x7 [ 12.051004] sound hdaudioC1D0: inputs: [ 12.067768] nvidia: module license 'NVIDIA' taints kernel. [ 12.067769] Disabling lock debugging due to kernel taint [ 12.074530] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 12.074811] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0 [ 12.074817] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 349.16 Wed Apr 8 00:17:22 PDT 2015 [ 12.125112] random: nonblocking pool is initialized [ 12.626391] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95) [ 12.626419] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95) [ 12.626435] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95) [ 12.626458] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95) [ 12.626474] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95) [ 12.626500] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95) [ 12.626515] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95) [ 12.626530] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95) [ 12.798215] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95) [ 12.798260] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95) [ 13.100366] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95) [ 15.352382] BTRFS info (device sdb2): disk space caching is enabled [ 15.471318] Adding 4194300k swap on /dev/sda2. Priority:-1 extents:1 across:4194300k [ 19.102332] r8169 0000:03:00.2 eth0: link down [ 19.113392] NET: Registered protocol family 10 [ 19.113879] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 23.224518] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95) [ 23.224553] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95) [ 23.224569] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95) [ 23.224593] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95) [ 23.224608] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95) [ 23.224634] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95) [ 23.224650] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95) [ 23.224665] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95) [ 23.287721] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95) [ 23.287760] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95) [ 23.338565] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95) [ 61.820547] cfg80211: Verifying active interfaces after reg change [ 75.480271] typefind:sink[16784]: segfault at 7f006020be00 ip 00007f006ead8c5f sp 00007f006e0bab60 error 4 in libgsttypefindfunctions.so[7f006eac9000+15000] [ 85.144420] traps: gom-flickr-mine[16942] trap int3 ip:7f87e7db113a sp:7ffe7528bf20 error:0 My thinking is that, since the driver is in /lib/firmware, the system cannot read the ucode (as it tries to load it before the root system is mounted). Is there a way to tell the kernel to look for the driver in the boot partition? If I can put it there, then the driver should load.

So the kernel I'm using has Intel Wireless WiFi MVM Firmware support, but it is compiled as a module. When trying to switch to built in, I get a message that says "This feature depends on another which has been configured as a module. As a result, this feature will be built as a module." Maybe I should use an older version of wpa_supplicant?

I was for some reason unable to directly include the driver... It says that it depends on things being built as modules, so it will be built as a module. Any way to find these dependencies? I think you're on the right track; I never thought to check this.

Thanks for the reply! I did install linux-firmware, and I am using network manager from Gnome 3. Here's lspci -k: 00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller (rev 06) Subsystem: CLEVO/KAPOK Computer Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06) Kernel driver in use: pcieport 00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 05) Subsystem: CLEVO/KAPOK Computer 8 Series/C220 Series Chipset Family USB xHCI Kernel driver in use: xhci_hcd Kernel modules: xhci_pci 00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04) Subsystem: CLEVO/KAPOK Computer 8 Series/C220 Series Chipset Family MEI Controller 00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 (rev 05) Subsystem: CLEVO/KAPOK Computer 8 Series/C220 Series Chipset Family USB EHCI Kernel driver in use: ehci-pci Kernel modules: ehci_pci 00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 05) Subsystem: CLEVO/KAPOK Computer 8 Series/C220 Series Chipset High Definition Audio Controller Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel 00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 (rev d5) Kernel driver in use: pcieport 00:1c.2 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #3 (rev d5) Kernel driver in use: pcieport 00:1c.3 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #4 (rev d5) Kernel driver in use: pcieport 00:1c.4 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #5 (rev d5) Kernel driver in use: pcieport 00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 (rev 05) Subsystem: CLEVO/KAPOK Computer 8 Series/C220 Series Chipset Family USB EHCI Kernel driver in use: ehci-pci Kernel modules: ehci_pci 00:1f.0 ISA bridge: Intel Corporation HM87 Express LPC Controller (rev 05) Subsystem: CLEVO/KAPOK Computer HM87 Express LPC Controller 00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 05) Subsystem: CLEVO/KAPOK Computer 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] Kernel driver in use: ahci Kernel modules: ahci 00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 05) Subsystem: CLEVO/KAPOK Computer 8 Series/C220 Series Chipset Family SMBus Controller Kernel modules: i2c_i801 01:00.0 VGA compatible controller: NVIDIA Corporation GK104M [GeForce GTX 860M] (rev a1) Subsystem: CLEVO/KAPOK Computer GK104M [GeForce GTX 860M] Kernel driver in use: nvidia Kernel modules: nvidia 01:00.1 Audio device: NVIDIA Corporation GK104 HDMI Audio Controller (rev a1) Subsystem: CLEVO/KAPOK Computer GK104 HDMI Audio Controller Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel 03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5289 (rev 01) Subsystem: CLEVO/KAPOK Computer Device 0376 03:00.2 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 0a) Subsystem: CLEVO/KAPOK Computer RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller Kernel driver in use: r8169 Kernel modules: r8169 04:00.0 Network controller: Intel Corporation Wireless 3160 (rev 83) Subsystem: Intel Corporation Dual Band Wireless-AC 3160 Kernel driver in use: iwlwifi Kernel modules: iwlwifi Here's the dmesg output: [ 0.336395] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.336563] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME] [ 0.336717] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability] [ 0.337080] PCI host bridge to bus 0000:00 [ 0.337143] pci_bus 0000:00: root bus resource [bus 00-7e] [ 0.337208] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.337272] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.337337] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.337404] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff] [ 0.337469] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff] [ 0.337536] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff] [ 0.337601] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff] [ 0.337668] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff] [ 0.337733] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff] [ 0.337798] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfeafffff] [ 0.337869] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000 [ 0.337940] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400 [ 0.337970] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.338006] pci 0000:00:01.0: System wakeup disabled by ACPI [ 0.338127] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.338144] pci 0000:00:14.0: reg 0x10: [mem 0xec300000-0xec30ffff 64bit] [ 0.338200] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.338226] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.338325] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.338342] pci 0000:00:16.0: reg 0x10: [mem 0xec31a000-0xec31a00f 64bit] [ 0.338400] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.338467] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.338485] pci 0000:00:1a.0: reg 0x10: [mem 0xec318000-0xec3183ff] [ 0.338567] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.338604] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.338705] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300 [ 0.338719] pci 0000:00:1b.0: reg 0x10: [mem 0xec310000-0xec313fff 64bit] [ 0.338782] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.338809] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.338905] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.338968] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.338997] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.339093] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400 [ 0.339155] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.339184] pci 0000:00:1c.2: System wakeup disabled by ACPI [ 0.339280] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 [ 0.339342] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.339371] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 0.339468] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 [ 0.339538] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.339568] pci 0000:00:1c.4: System wakeup disabled by ACPI [ 0.339670] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.339688] pci 0000:00:1d.0: reg 0x10: [mem 0xec317000-0xec3173ff] [ 0.339770] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.339808] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.339908] pci 0000:00:1f.0: [8086:8c4b] type 00 class 0x060100 [ 0.340054] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601 [ 0.340067] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077] [ 0.340074] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063] [ 0.340079] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057] [ 0.340085] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043] [ 0.340091] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] [ 0.340098] pci 0000:00:1f.2: reg 0x24: [mem 0xec316000-0xec3167ff] [ 0.340131] pci 0000:00:1f.2: PME# supported from D3hot [ 0.340186] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.340198] pci 0000:00:1f.3: reg 0x10: [mem 0xec315000-0xec3150ff 64bit] [ 0.340216] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.340311] pci 0000:01:00.0: [10de:119a] type 00 class 0x030000 [ 0.340321] pci 0000:01:00.0: reg 0x10: [mem 0xeb000000-0xebffffff] [ 0.340331] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.340340] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref] [ 0.340347] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f] [ 0.340353] pci 0000:01:00.0: reg 0x30: [mem 0xec000000-0xec07ffff pref] [ 0.340407] pci 0000:01:00.0: System wakeup disabled by ACPI [ 0.340506] pci 0000:01:00.1: [10de:0e0a] type 00 class 0x040300 [ 0.340516] pci 0000:01:00.1: reg 0x10: [mem 0xec080000-0xec083fff] [ 0.356848] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.356912] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.356914] pci 0000:00:01.0: bridge window [mem 0xeb000000-0xec0fffff] [ 0.356917] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref] [ 0.356962] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.357089] pci 0000:03:00.0: [10ec:5289] type 00 class 0xff0000 [ 0.357107] pci 0000:03:00.0: reg 0x10: [mem 0xec200000-0xec20ffff] [ 0.357245] pci 0000:03:00.0: supports D1 D2 [ 0.357246] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.357273] pci 0000:03:00.0: System wakeup disabled by ACPI [ 0.357382] pci 0000:03:00.2: [10ec:8168] type 00 class 0x020000 [ 0.357400] pci 0000:03:00.2: reg 0x10: [io 0xd000-0xd0ff] [ 0.357426] pci 0000:03:00.2: reg 0x18: [mem 0xd2104000-0xd2104fff 64bit pref] [ 0.357443] pci 0000:03:00.2: reg 0x20: [mem 0xd2100000-0xd2103fff 64bit pref] [ 0.357524] pci 0000:03:00.2: supports D1 D2 [ 0.357525] pci 0000:03:00.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.357550] pci 0000:03:00.2: System wakeup disabled by ACPI [ 0.376883] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 0.376948] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff] [ 0.376950] pci 0000:00:1c.2: bridge window [mem 0xec200000-0xec2fffff] [ 0.376954] pci 0000:00:1c.2: bridge window [mem 0xd2100000-0xd21fffff 64bit pref] [ 0.377024] pci 0000:04:00.0: [8086:08b3] type 00 class 0x028000 [ 0.377061] pci 0000:04:00.0: reg 0x10: [mem 0xec100000-0xec101fff 64bit] [ 0.377248] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.377277] pci 0000:04:00.0: System wakeup disabled by ACPI [ 0.396915] pci 0000:00:1c.3: PCI bridge to [bus 04] [ 0.396980] pci 0000:00:1c.3: bridge window [mem 0xec100000-0xec1fffff] [ 0.397031] pci 0000:00:1c.4: PCI bridge to [bus 05-3d] [ 0.397097] pci 0000:00:1c.4: bridge window [mem 0xd4000000-0xea0fffff] [ 0.397102] pci 0000:00:1c.4: bridge window [mem 0x90000000-0xb1ffffff 64bit pref] [ 0.397132] pci_bus 0000:00: on NUMA node 0 [ 0.397133] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported) [ 0.397723] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.398317] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.398908] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 10 11 12 14 15) [ 0.399500] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15) [ 0.400090] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.400774] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.401458] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15) [ 0.402047] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.402815] ACPI: Enabled 5 GPEs in block 00 to 3F [ 0.402996] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.403119] vgaarb: setting as boot device: PCI:0000:01:00.0 [ 0.403183] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.403250] vgaarb: loaded [ 0.403309] vgaarb: bridge control possible 0000:01:00.0 [ 0.403425] SCSI subsystem initialized [ 0.403550] PCI: Using ACPI for IRQ routing [ 0.406428] PCI: pci_cache_line_size set to 64 bytes [ 0.406477] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.406478] e820: reserve RAM buffer [mem 0x7d21f000-0x7fffffff] [ 0.406479] e820: reserve RAM buffer [mem 0x7d981000-0x7fffffff] [ 0.406480] e820: reserve RAM buffer [mem 0x8dc0b000-0x8fffffff] [ 0.406481] e820: reserve RAM buffer [mem 0x8e676000-0x8fffffff] [ 0.406482] e820: reserve RAM buffer [mem 0x8f000000-0x8fffffff] [ 0.406483] e820: reserve RAM buffer [mem 0x46f000000-0x46fffffff] [ 0.406620] Switched to clocksource hpet [ 0.406765] pnp: PnP ACPI init [ 0.406882] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.406962] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.407099] system 00:01: [io 0x0680-0x069f] has been reserved [ 0.407165] system 00:01: [io 0xffff] has been reserved [ 0.407228] system 00:01: [io 0xffff] has been reserved [ 0.407292] system 00:01: [io 0xffff] has been reserved [ 0.407355] system 00:01: [io 0x1c00-0x1cfe] has been reserved [ 0.407420] system 00:01: [io 0x1d00-0x1dfe] has been reserved [ 0.407484] system 00:01: [io 0x1e00-0x1efe] has been reserved [ 0.407549] system 00:01: [io 0x1f00-0x1ffe] has been reserved [ 0.407614] system 00:01: [io 0x1800-0x18fe] could not be reserved [ 0.407679] system 00:01: [io 0x164e-0x164f] has been reserved [ 0.407743] system 00:01: [io 0x3322-0x3323] has been reserved [ 0.407808] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.407832] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.407867] system 00:03: [io 0x1854-0x1857] has been reserved [ 0.407934] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.407955] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.408014] pnp 00:05: Plug and Play ACPI device, IDs SYN1212 PNP0f13 (active) [ 0.408049] system 00:06: [io 0x04d0-0x04d1] has been reserved [ 0.408115] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.408389] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.408456] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.408522] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.408587] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.408653] system 00:07: [mem 0xf0000000-0xf7ffffff] has been reserved [ 0.408719] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.408784] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.408850] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.408915] system 00:07: [mem 0xff000000-0xffffffff] has been reserved [ 0.408981] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.409047] system 00:07: [mem 0xeffdf000-0xeffdffff] has been reserved [ 0.409113] system 00:07: [mem 0xeffe0000-0xeffeffff] has been reserved [ 0.409179] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.409307] pnp: PnP ACPI: found 8 devices [ 0.415358] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000 [ 0.415360] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 [ 0.415361] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 [ 0.415378] pci 0000:00:1c.4: bridge window [io 0x1000-0x0fff] to [bus 05-3d] add_size 1000 [ 0.415382] pci 0000:00:1c.0: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 [ 0.415383] pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.415384] pci 0000:00:1c.0: res[7]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.415385] pci 0000:00:1c.4: res[7]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.415390] pci 0000:00:1c.0: BAR 8: assigned [mem 0xb2000000-0xb21fffff] [ 0.415461] pci 0000:00:1c.0: BAR 9: assigned [mem 0xb2200000-0xb23fffff 64bit pref] [ 0.415529] pci 0000:00:1c.0: BAR 7: assigned [io 0x2000-0x2fff] [ 0.415594] pci 0000:00:1c.4: BAR 7: assigned [io 0x4000-0x4fff] [ 0.415659] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.415722] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.415788] pci 0000:00:01.0: bridge window [mem 0xeb000000-0xec0fffff] [ 0.415855] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref] [ 0.415923] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.415987] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.416055] pci 0000:00:1c.0: bridge window [mem 0xb2000000-0xb21fffff] [ 0.416122] pci 0000:00:1c.0: bridge window [mem 0xb2200000-0xb23fffff 64bit pref] [ 0.416193] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 0.416256] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff] [ 0.416323] pci 0000:00:1c.2: bridge window [mem 0xec200000-0xec2fffff] [ 0.416390] pci 0000:00:1c.2: bridge window [mem 0xd2100000-0xd21fffff 64bit pref] [ 0.416461] pci 0000:00:1c.3: PCI bridge to [bus 04] [ 0.416526] pci 0000:00:1c.3: bridge window [mem 0xec100000-0xec1fffff] [ 0.416596] pci 0000:00:1c.4: PCI bridge to [bus 05-3d] [ 0.416676] pci 0000:00:1c.4: bridge window [io 0x4000-0x4fff] [ 0.416743] pci 0000:00:1c.4: bridge window [mem 0xd4000000-0xea0fffff] [ 0.416810] pci 0000:00:1c.4: bridge window [mem 0x90000000-0xb1ffffff 64bit pref] [ 0.416882] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.416883] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.416884] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.416885] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff] [ 0.416886] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff] [ 0.416887] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff] [ 0.416888] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff] [ 0.416889] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff] [ 0.416890] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff] [ 0.416891] pci_bus 0000:00: resource 13 [mem 0x90000000-0xfeafffff] [ 0.416892] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.416893] pci_bus 0000:01: resource 1 [mem 0xeb000000-0xec0fffff] [ 0.416894] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref] [ 0.416895] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.416896] pci_bus 0000:02: resource 1 [mem 0xb2000000-0xb21fffff] [ 0.416897] pci_bus 0000:02: resource 2 [mem 0xb2200000-0xb23fffff 64bit pref] [ 0.416898] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] [ 0.416899] pci_bus 0000:03: resource 1 [mem 0xec200000-0xec2fffff] [ 0.416900] pci_bus 0000:03: resource 2 [mem 0xd2100000-0xd21fffff 64bit pref] [ 0.416901] pci_bus 0000:04: resource 1 [mem 0xec100000-0xec1fffff] [ 0.416902] pci_bus 0000:05: resource 0 [io 0x4000-0x4fff] [ 0.416903] pci_bus 0000:05: resource 1 [mem 0xd4000000-0xea0fffff] [ 0.416904] pci_bus 0000:05: resource 2 [mem 0x90000000-0xb1ffffff 64bit pref] [ 0.416950] NET: Registered protocol family 2 [ 0.417161] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.417341] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.417503] TCP: Hash tables configured (established 131072 bind 65536) [ 0.417579] TCP: reno registered [ 0.417641] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 0.417733] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 0.417877] NET: Registered protocol family 1 [ 0.418174] PCI: CLS mismatch (64 != 128), using 64 bytes [ 0.418273] pci 0000:01:00.0: Video device with shadowed ROM [ 0.418309] Trying to unpack rootfs image as initramfs... [ 0.771148] Freeing initrd memory: 3776K (ffff880037890000 - ffff880037c40000) [ 0.771223] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.771289] software IO TLB [mem 0x89c0b000-0x8dc0b000] (64MB) mapped at [ffff880089c0b000-ffff88008dc0afff] [ 0.771646] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer [ 0.772034] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.772140] audit: initializing netlink subsys (disabled) [ 0.772217] audit: type=2000 audit(1431319303.760:1): initialized [ 0.772549] VFS: Disk quotas dquot_6.5.2 [ 0.772628] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.772875] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.772994] SGI XFS with ACLs, security attributes, realtime, no debug enabled [ 0.773289] ocfs2: Registered cluster interface o2cb [ 0.773379] OCFS2 User DLM kernel interface loaded [ 0.773700] gfs2: GFS2 installed [ 0.773925] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) [ 0.773995] io scheduler noop registered [ 0.774058] io scheduler deadline registered [ 0.774132] io scheduler cfq registered (default) [ 0.774716] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.775056] Linux agpgart interface v0.103 [ 0.776063] brd: module loaded [ 0.776576] loop: module loaded [ 0.776706] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:SYNM] at 0x60,0x64 irq 1,12 [ 1.300562] i8042: Detected active multiplexing controller, rev 1.1 [ 1.302515] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.302579] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 1.302643] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 1.302706] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 1.302769] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 1.302909] mousedev: PS/2 mouse device common for all mice [ 1.303055] hidraw: raw HID events driver (C) Jiri Kosina [ 1.303321] TCP: cubic registered [ 1.303383] NET: Registered protocol family 17 [ 1.303752] registered taskstats version 1 [ 1.304401] Freeing unused kernel memory: 824K (ffffffff816d3000 - ffffffff817a1000) [ 1.306349] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.372753] libata version 3.00 loaded. [ 1.480809] ahci 0000:00:1f.2: version 3.0 [ 1.480926] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 1.480949] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0xf impl SATA mode [ 1.480951] ahci 0000:00:1f.2: flags: 64bit ncq stag led clo pio slum part ems sxs apst [ 1.538592] scsi host0: ahci [ 1.538676] scsi host1: ahci [ 1.538763] scsi host2: ahci [ 1.538843] scsi host3: ahci [ 1.538914] scsi host4: ahci [ 1.538994] scsi host5: ahci [ 1.539035] ata1: SATA max UDMA/133 abar m2048@0xec316000 port 0xec316100 irq 25 [ 1.539037] ata2: SATA max UDMA/133 abar m2048@0xec316000 port 0xec316180 irq 25 [ 1.539039] ata3: SATA max UDMA/133 abar m2048@0xec316000 port 0xec316200 irq 25 [ 1.539041] ata4: SATA max UDMA/133 abar m2048@0xec316000 port 0xec316280 irq 25 [ 1.539042] ata5: DUMMY [ 1.539042] ata6: DUMMY [ 1.768266] tsc: Refined TSC clocksource calibration: 2793.531 MHz [ 1.898442] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.899572] ata1.00: ATA-8: HGST HTS721010A9E630, JB0OA3J0, max UDMA/133 [ 1.899573] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.900803] ata1.00: configured for UDMA/133 [ 1.900870] scsi 0:0:0:0: Direct-Access ATA HGST HTS721010A9 A3J0 PQ: 0 ANSI: 5 [ 1.901020] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 1.901022] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 1.901065] sd 0:0:0:0: [sda] Write Protect is off [ 1.901068] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.901089] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.964550] sda: sda1 sda2 [ 1.964731] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.308929] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.309902] ata2.00: ATA-8: Hitachi HTS545032B9SA02, PB3AC60W, max UDMA/133 [ 2.309904] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.311951] ata2.00: configured for UDMA/133 [ 2.312005] scsi 1:0:0:0: Direct-Access ATA Hitachi HTS54503 C60W PQ: 0 ANSI: 5 [ 2.312133] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 2.312165] sd 1:0:0:0: [sdb] Write Protect is off [ 2.312167] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.312183] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.330562] sdb: sdb1 sdb2 [ 2.330727] sd 1:0:0:0: [sdb] Attached SCSI disk [ 2.649327] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.652940] ata3.00: ATAPI: TSSTcorp CDDVDW SN-208FB, TC00, max UDMA/100 [ 2.655511] ata3.00: configured for UDMA/100 [ 2.656820] scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW SN-208FB TC00 PQ: 0 ANSI: 5 [ 2.703475] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.703476] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.703551] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 2.750265] psmouse serio2: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00223/0x840300/0x122c00, board id: 1760, fw id: 1211538 [ 2.769505] Switched to clocksource tsc [ 2.790276] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input6 [ 3.049807] ata4: SATA link down (SStatus 0 SControl 300) [ 3.122315] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.122342] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 3.122365] sr 2:0:0:0: Attached scsi generic sg2 type 5 [ 3.210066] scsi: <fdomain> Detection failed (no card) [ 3.321203] GDT-HA: Storage RAID Controller Driver. Version: 3.05 [ 3.375644] imm: Version 2.05 (for Linux 2.4.0) [ 3.542862] Fusion MPT base driver 3.04.20 [ 3.542864] Copyright (c) 1999-2008 LSI Corporation [ 3.571385] Fusion MPT SPI Host driver 3.04.20 [ 3.589431] Fusion MPT FC Host driver 3.04.20 [ 3.608042] Fusion MPT SAS Host driver 3.04.20 [ 3.623069] 3ware Storage Controller device driver for Linux v1.26.02.003. [ 3.637181] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014. [ 3.652697] HP CISS Driver (v 3.6.26) [ 3.697811] Adaptec aacraid driver 1.2-0[30300]-ms [ 3.731067] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) [ 3.731920] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) [ 3.763226] megasas: 06.805.06.01-rc1 [ 3.780850] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.16-k. [ 3.810999] Emulex LightPulse Fibre Channel SCSI driver 10.4.8000.0. [ 3.811000] Copyright(c) 2004-2014 Emulex. All rights reserved. [ 3.850286] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded [ 4.639356] ACPI: bus type USB registered [ 4.639376] usbcore: registered new interface driver usbfs [ 4.639386] usbcore: registered new interface driver hub [ 4.639407] usbcore: registered new device driver usb [ 4.640608] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.668757] usbcore: registered new interface driver usb-storage [ 4.694013] uhci_hcd: USB Universal Host Controller Interface driver [ 4.719226] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.770215] usbcore: registered new interface driver usbhid [ 4.770216] usbhid: USB HID core driver [ 5.025915] device-mapper: uevent: version 1.0.3 [ 5.025959] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com [ 5.246223] md: raid0 personality registered for level 0 [ 5.273988] md: raid1 personality registered for level 1 [ 5.310228] async_tx: api initialized (async) [ 5.482693] raid6: sse2x1 8589 MB/s [ 5.652891] raid6: sse2x2 11271 MB/s [ 5.823095] raid6: sse2x4 13191 MB/s [ 5.993298] raid6: avx2x1 16774 MB/s [ 6.163500] raid6: avx2x2 20158 MB/s [ 6.333704] raid6: avx2x4 23136 MB/s [ 6.333705] raid6: using algorithm avx2x4 (23136 MB/s) [ 6.333706] raid6: using avx2x2 recovery algorithm [ 6.350226] xor: automatically using best checksumming function: [ 6.443834] avx : 28139.200 MB/sec [ 6.448850] md: raid6 personality registered for level 6 [ 6.448851] md: raid5 personality registered for level 5 [ 6.448851] md: raid4 personality registered for level 4 [ 6.479809] md: raid10 personality registered for level 10 [ 6.508992] md: linear personality registered for level -1 [ 6.538163] md: multipath personality registered for level -4 [ 6.589563] Btrfs loaded [ 6.620635] JFS: nTxBlock = 8192, nTxLock = 65536 [ 6.664501] RPC: Registered named UNIX socket transport module. [ 6.664503] RPC: Registered udp transport module. [ 6.664503] RPC: Registered tcp transport module. [ 6.664504] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 6.702001] fuse init (API version 7.23) [ 6.745178] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 6.745179] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 6.782997] pps_core: LinuxPPS API ver. 1 registered [ 6.782998] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 6.783835] PTP clock support registered [ 6.833499] Loading iSCSI transport class v2.0-870. [ 7.093021] UDF-fs: warning (device sdb2): udf_fill_super: No partition found (2) [ 7.099587] (mount,15222,0):ocfs2_fill_super:1054 ERROR: superblock probe failed! [ 7.099589] (mount,15222,0):ocfs2_fill_super:1245 ERROR: status = -22 [ 7.099697] gfs2: gfs2 mount does not exist [ 7.099785] BTRFS: device fsid 59b3eb07-79cd-4973-ab94-ae247a4de533 devid 1 transid 2105 /dev/sdb2 [ 7.100040] BTRFS info (device sdb2): disk space caching is enabled [ 10.700239] udevd[15617]: starting version 1.5.3 [ 10.906437] random: udevd urandom read with 70 bits of entropy available [ 11.611284] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input9 [ 11.611316] ACPI: Power Button [PWRB] [ 11.611354] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input10 [ 11.611376] ACPI: Sleep Button [SLPB] [ 11.611414] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input11 [ 11.611465] ACPI: Lid Switch [LID0] [ 11.611503] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input12 [ 11.611535] ACPI: Power Button [PWRF] [ 11.611921] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 11.611924] ACPI: Battery Slot [BAT0] (battery present) [ 11.699601] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 11.699636] ACPI: AC Adapter [AC] (off-line) [ 11.811464] cfg80211: Calling CRDA to update world regulatory domain [ 11.857685] Monitor-Mwait will be used to enter C-1 state [ 11.857691] Monitor-Mwait will be used to enter C-2 state [ 11.857697] ACPI: acpi_idle registered with cpuidle [ 11.864870] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 11.864876] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 11.864952] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 11.865034] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 11.865036] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 11.865037] usb usb1: Product: xHCI Host Controller [ 11.865039] usb usb1: Manufacturer: Linux 3.19.3-1~exp1 xhci-hcd [ 11.865039] usb usb1: SerialNumber: 0000:00:14.0 [ 11.865146] hub 1-0:1.0: USB hub found [ 11.865164] hub 1-0:1.0: 14 ports detected [ 11.867811] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 11.867814] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 11.867887] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 11.867889] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 11.867890] usb usb2: Product: xHCI Host Controller [ 11.867891] usb usb2: Manufacturer: Linux 3.19.3-1~exp1 xhci-hcd [ 11.867892] usb usb2: SerialNumber: 0000:00:14.0 [ 11.867992] hub 2-0:1.0: USB hub found [ 11.868005] hub 2-0:1.0: 6 ports detected [ 11.870872] ehci-pci: EHCI PCI platform driver [ 11.870959] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 11.870964] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 11.870974] ehci-pci 0000:00:1a.0: debug port 2 [ 11.874888] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 11.874900] ehci-pci 0000:00:1a.0: irq 16, io mem 0xec318000 [ 11.890355] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 11.890401] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 11.890403] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 11.890404] usb usb3: Product: EHCI Host Controller [ 11.890405] usb usb3: Manufacturer: Linux 3.19.3-1~exp1 ehci_hcd [ 11.890406] usb usb3: SerialNumber: 0000:00:1a.0 [ 11.890508] hub 3-0:1.0: USB hub found [ 11.890528] hub 3-0:1.0: 2 ports detected [ 11.890766] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 11.890771] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 11.890781] ehci-pci 0000:00:1d.0: debug port 2 [ 11.894687] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 11.894697] ehci-pci 0000:00:1d.0: irq 23, io mem 0xec317000 [ 11.910390] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 11.910465] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 [ 11.910467] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 11.910468] usb usb4: Product: EHCI Host Controller [ 11.910469] usb usb4: Manufacturer: Linux 3.19.3-1~exp1 ehci_hcd [ 11.910470] usb usb4: SerialNumber: 0000:00:1d.0 [ 11.910595] hub 4-0:1.0: USB hub found [ 11.910603] hub 4-0:1.0: 2 ports detected [ 11.991552] thermal LNXTHERM:00: registered as thermal_zone0 [ 11.991554] ACPI: Thermal Zone [TZ0] (49 C) [ 12.099829] microcode: CPU0 sig=0x306c3, pf=0x10, revision=0x17 [ 12.132590] platform microcode: firmware: failed to load intel-ucode/06-3c-03 (-2) [ 12.132617] microcode: CPU1 sig=0x306c3, pf=0x10, revision=0x17 [ 12.132625] platform microcode: firmware: failed to load intel-ucode/06-3c-03 (-2) [ 12.132645] microcode: CPU2 sig=0x306c3, pf=0x10, revision=0x17 [ 12.132651] platform microcode: firmware: failed to load intel-ucode/06-3c-03 (-2) [ 12.132657] microcode: CPU3 sig=0x306c3, pf=0x10, revision=0x17 [ 12.132663] platform microcode: firmware: failed to load intel-ucode/06-3c-03 (-2) [ 12.132670] microcode: CPU4 sig=0x306c3, pf=0x10, revision=0x17 [ 12.132677] platform microcode: firmware: failed to load intel-ucode/06-3c-03 (-2) [ 12.132697] microcode: CPU5 sig=0x306c3, pf=0x10, revision=0x17 [ 12.132702] platform microcode: firmware: failed to load intel-ucode/06-3c-03 (-2) [ 12.132722] microcode: CPU6 sig=0x306c3, pf=0x10, revision=0x17 [ 12.132727] platform microcode: firmware: failed to load intel-ucode/06-3c-03 (-2) [ 12.132734] microcode: CPU7 sig=0x306c3, pf=0x10, revision=0x17 [ 12.132739] platform microcode: firmware: failed to load intel-ucode/06-3c-03 (-2) [ 12.132799] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 12.189153] input: PC Speaker as /devices/platform/pcspkr/input/input13 [ 12.190719] usb 1-3: new full-speed USB device number 2 using xhci_hcd [ 12.193805] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 12.193811] r8169 0000:03:00.2: can't disable ASPM; OS doesn't have ASPM control [ 12.194521] r8169 0000:03:00.2 eth0: RTL8411 at 0xffffc9000931e000, 80:fa:5b:01:6d:12, XID 08800800 IRQ 27 [ 12.194522] r8169 0000:03:00.2 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 12.220786] usb 3-1: new high-speed USB device number 2 using ehci-pci [ 12.230796] usb 4-1: new high-speed USB device number 2 using ehci-pci [ 12.332453] usb 1-3: New USB device found, idVendor=1c7a, idProduct=0603 [ 12.332456] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 12.332458] usb 1-3: Product: EgisTec_ES603 [ 12.332459] usb 1-3: Manufacturer: EgisTec [ 12.370796] ACPI: Video Device [PEGP] (multi-head: yes rom: no post: no) [ 12.371284] usb 3-1: New USB device found, idVendor=8087, idProduct=8008 [ 12.371286] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 12.371438] hub 3-1:1.0: USB hub found [ 12.371530] hub 3-1:1.0: 6 ports detected [ 12.382010] Intel(R) Wireless WiFi driver for Linux, in-tree: [ 12.382011] Copyright(c) 2003- 2014 Intel Corporation [ 12.461042] usb 1-7: new full-speed USB device number 3 using xhci_hcd [ 12.489514] snd_hda_intel 0000:01:00.1: Disabling MSI [ 12.607956] ACPI Warning: SystemIO range 0x000000000000f000-0x000000000000f01f conflicts with OpRegion 0x000000000000f000-0x000000000000f00f (\_SB_.PCI0.SBUS.SMBI) (20141107/utaddress-258) [ 12.607961] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 12.608106] acpi device:02: registered as cooling_device8 [ 12.608225] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input14 [ 12.608569] usb 4-1: New USB device found, idVendor=8087, idProduct=8000 [ 12.608571] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 12.609651] hub 4-1:1.0: USB hub found [ 12.609692] hub 4-1:1.0: 8 ports detected [ 12.612070] usb 1-7: New USB device found, idVendor=8087, idProduct=07dc [ 12.612073] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 12.671846] [drm] Initialized drm 1.1.0 20060810 [ 12.682778] sound hdaudioC0D0: autoconfig: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:line [ 12.682780] sound hdaudioC0D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0) [ 12.682781] sound hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 12.682782] sound hdaudioC0D0: mono: mono_out=0x0 [ 12.682783] sound hdaudioC0D0: dig-out=0x1e/0x0 [ 12.682784] sound hdaudioC0D0: inputs: [ 12.682785] sound hdaudioC0D0: Mic=0x18 [ 12.682787] sound hdaudioC0D0: Internal Mic=0x12 [ 12.682788] sound hdaudioC0D0: Line=0x1a [ 12.690624] random: nonblocking pool is initialized [ 12.849800] iwlwifi 0000:04:00.0: firmware: direct-loading firmware iwlwifi-3160-12.ucode [ 12.849929] iwlwifi 0000:04:00.0: loaded firmware version 25.15.12.0 op_mode iwlmvm [ 13.131871] sound hdaudioC1D0: autoconfig: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line [ 13.131874] sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 13.131875] sound hdaudioC1D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 13.131876] sound hdaudioC1D0: mono: mono_out=0x0 [ 13.131877] sound hdaudioC1D0: dig-out=0x5/0x7 [ 13.131877] sound hdaudioC1D0: inputs: [ 13.138817] Bluetooth: Core ver 2.20 [ 13.138824] NET: Registered protocol family 31 [ 13.138824] Bluetooth: HCI device and connection manager initialized [ 13.138827] Bluetooth: HCI socket layer initialized [ 13.138829] Bluetooth: L2CAP socket layer initialized [ 13.138830] Bluetooth: SCO socket layer initialized [ 13.320704] nvidia: module license 'NVIDIA' taints kernel. [ 13.320706] Disabling lock debugging due to kernel taint [ 13.327873] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 13.328089] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0 [ 13.328092] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 349.16 Wed Apr 8 00:17:22 PDT 2015 [ 13.348503] usbcore: registered new interface driver btusb [ 13.361119] Bluetooth: hci0: read Intel version: 370710010002030d00 [ 13.362988] iwlwifi 0000:04:00.0: Detected Intel(R) Dual Band Wireless AC 3160, REV=0x164 [ 13.363035] iwlwifi 0000:04:00.0: L1 Disabled - LTR Disabled [ 13.363258] iwlwifi 0000:04:00.0: L1 Disabled - LTR Disabled [ 13.422969] bluetooth hci0: firmware: direct-loading firmware intel/ibt-hw-37.7.10-fw-1.0.2.3.d.bseq [ 13.422974] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.0.2.3.d.bseq [ 13.550323] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated [ 13.593299] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 13.749580] cfg80211: World regulatory domain updated: [ 13.749581] cfg80211: DFS Master region: unset [ 13.749582] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 13.749584] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 13.749586] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 13.749587] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 13.749588] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 13.749589] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 13.749591] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 13.749592] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 13.749593] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 13.930671] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95) [ 13.930699] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95) [ 13.930715] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95) [ 13.930738] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95) [ 13.930754] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95) [ 13.930779] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95) [ 13.930795] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95) [ 13.930809] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95) [ 14.102525] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95) [ 14.102573] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95) [ 14.403935] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95) [ 15.692052] BTRFS info (device sdb2): disk space caching is enabled [ 15.828348] Adding 4194300k swap on /dev/sda2. Priority:-1 extents:1 across:4194300k [ 18.690891] iwlwifi 0000:04:00.0: L1 Disabled - LTR Disabled [ 18.691115] iwlwifi 0000:04:00.0: L1 Disabled - LTR Disabled [ 19.204186] r8169 0000:03:00.2: firmware: direct-loading firmware rtl_nic/rtl8411-1.fw [ 19.302150] r8169 0000:03:00.2 eth0: link down [ 19.467653] NET: Registered protocol family 10 [ 19.467881] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 19.467909] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 23.341273] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95) [ 23.341308] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95) [ 23.341324] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95) [ 23.341348] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95) [ 23.341363] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95) [ 23.341389] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95) [ 23.341404] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95) [ 23.341419] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95) [ 23.404482] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95) [ 23.404519] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95) [ 23.455530] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95) [ 110.137496] wlan0: authenticate with 28:cf:da:b0:d2:68 [ 110.140943] wlan0: send auth to 28:cf:da:b0:d2:68 (try 1/3) [ 110.141366] wlan0: authenticated [ 110.147906] wlan0: associate with 28:cf:da:b0:d2:68 (try 1/3) [ 110.148762] wlan0: RX AssocResp from 28:cf:da:b0:d2:68 (capab=0x511 status=0 aid=2) [ 110.149982] wlan0: associated [ 110.150010] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 110.150063] cfg80211: Calling CRDA for country: US [ 110.150140] wlan0: deauthenticating from 28:cf:da:b0:d2:68 by local choice (Reason: 3=DEAUTH_LEAVING) [ 110.152463] cfg80211: Calling CRDA to update world regulatory domain [ 110.153960] cfg80211: World regulatory domain updated: [ 110.153962] cfg80211: DFS Master region: unset [ 110.153962] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 110.153964] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 110.153966] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 110.153967] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 110.153968] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 110.153970] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 110.153971] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 110.153972] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 110.153973] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 116.689880] wlan0: authenticate with 28:cf:da:b0:d2:67 [ 116.692713] wlan0: send auth to 28:cf:da:b0:d2:67 (try 1/3) [ 116.694480] wlan0: authenticated [ 116.695712] wlan0: associate with 28:cf:da:b0:d2:67 (try 1/3) [ 116.699189] wlan0: RX AssocResp from 28:cf:da:b0:d2:67 (capab=0x431 status=0 aid=11) [ 116.699909] wlan0: associated [ 116.699971] cfg80211: Calling CRDA for country: US [ 116.700018] wlan0: deauthenticating from 28:cf:da:b0:d2:67 by local choice (Reason: 3=DEAUTH_LEAVING) [ 116.702181] cfg80211: Calling CRDA to update world regulatory domain [ 116.703515] cfg80211: World regulatory domain updated: [ 116.703516] cfg80211: DFS Master region: unset [ 116.703517] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 116.703519] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 116.703520] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 116.703521] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 116.703523] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 116.703524] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 116.703525] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 116.703526] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 116.703528] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 123.239152] wlan0: authenticate with 28:cf:da:b0:d2:68 [ 123.241905] wlan0: send auth to 28:cf:da:b0:d2:68 (try 1/3) [ 123.243069] wlan0: authenticated [ 123.243523] wlan0: associate with 28:cf:da:b0:d2:68 (try 1/3) [ 123.245457] wlan0: RX AssocResp from 28:cf:da:b0:d2:68 (capab=0x511 status=0 aid=2) [ 123.246390] wlan0: associated [ 123.246434] cfg80211: Calling CRDA for country: US [ 123.246499] wlan0: deauthenticating from 28:cf:da:b0:d2:68 by local choice (Reason: 3=DEAUTH_LEAVING) [ 123.248903] cfg80211: Calling CRDA to update world regulatory domain [ 123.250252] cfg80211: World regulatory domain updated: [ 123.250253] cfg80211: DFS Master region: unset [ 123.250254] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 123.250256] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 123.250257] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 123.250258] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 123.250260] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 123.250261] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 123.250262] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 123.250263] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 123.250264] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 129.786691] wlan0: authenticate with 28:cf:da:b0:d2:67 [ 129.788633] wlan0: send auth to 28:cf:da:b0:d2:67 (try 1/3) [ 129.790312] wlan0: authenticated [ 129.796933] wlan0: associate with 28:cf:da:b0:d2:67 (try 1/3) [ 129.803723] wlan0: RX AssocResp from 28:cf:da:b0:d2:67 (capab=0x431 status=0 aid=11) [ 129.804083] wlan0: associated [ 129.804144] cfg80211: Calling CRDA for country: US [ 129.804213] wlan0: deauthenticating from 28:cf:da:b0:d2:67 by local choice (Reason: 3=DEAUTH_LEAVING) [ 129.806516] cfg80211: Regulatory domain changed to country: US [ 129.806518] cfg80211: DFS Master region: unset [ 129.806519] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 129.806520] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A) [ 129.806522] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A) [ 129.806523] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s) [ 129.806525] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2300 mBm), (0 s) [ 129.806526] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A) [ 129.806527] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [ 129.806670] cfg80211: Calling CRDA to update world regulatory domain [ 129.807841] cfg80211: World regulatory domain updated: [ 129.807842] cfg80211: DFS Master region: unset [ 129.807843] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 129.807845] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 129.807846] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 129.807847] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 129.807848] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 129.807850] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 129.807851] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 129.807852] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 129.807853] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 134.686477] traps: gom-flickr-mine[17586] trap int3 ip:7fed6f1bf13a sp:7ffc9307c680 error:0 [ 220.219398] wlan0: authenticate with 3c:ea:4f:d2:0d:f9 [ 220.221881] wlan0: send auth to 3c:ea:4f:d2:0d:f9 (try 1/3) [ 220.223513] wlan0: authenticated [ 220.223651] iwlwifi 0000:04:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 220.223653] iwlwifi 0000:04:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 220.229536] wlan0: associate with 3c:ea:4f:d2:0d:f9 (try 1/3) [ 220.231657] wlan0: RX AssocResp from 3c:ea:4f:d2:0d:f9 (capab=0x431 status=0 aid=1) [ 220.233003] wlan0: associated [ 220.233054] cfg80211: Calling CRDA for country: US [ 220.233101] wlan0: deauthenticating from 3c:ea:4f:d2:0d:f9 by local choice (Reason: 3=DEAUTH_LEAVING) [ 220.236192] cfg80211: Calling CRDA to update world regulatory domain [ 220.237488] cfg80211: World regulatory domain updated: [ 220.237489] cfg80211: DFS Master region: unset [ 220.237490] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 220.237492] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 220.237493] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 220.237494] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 220.237495] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 220.237497] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 220.237498] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 220.237499] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 220.237500] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 229.972901] wlan0: authenticate with 3c:ea:4f:d2:0d:f9 [ 229.975122] wlan0: send auth to 3c:ea:4f:d2:0d:f9 (try 1/3) [ 229.976758] wlan0: authenticated [ 229.976884] iwlwifi 0000:04:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 229.976885] iwlwifi 0000:04:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 229.981195] wlan0: associate with 3c:ea:4f:d2:0d:f9 (try 1/3) [ 229.983406] wlan0: RX AssocResp from 3c:ea:4f:d2:0d:f9 (capab=0x431 status=0 aid=1) [ 229.984668] wlan0: associated [ 229.984720] cfg80211: Calling CRDA for country: US [ 229.984774] wlan0: deauthenticating from 3c:ea:4f:d2:0d:f9 by local choice (Reason: 3=DEAUTH_LEAVING) [ 229.988174] cfg80211: Calling CRDA to update world regulatory domain [ 229.989758] cfg80211: World regulatory domain updated: [ 229.989759] cfg80211: DFS Master region: unset [ 229.989760] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 229.989762] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 229.989763] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 229.989764] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 229.989766] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 229.989767] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 229.989768] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 229.989769] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 229.989770] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 252.525068] traps: gom-flickr-mine[17734] trap int3 ip:7f62f4ea513a sp:7fff001a4cf0 error:0 Thanks again!

Hey everyone, I am very close on my installation. I built my kernel using genkernel. All the necessary drivers are, as far as I can tell, loading appropriately. I am typing this from my Ubuntu install, however, because I have no internet in Funtoo. The driver modules for both the ethernet and wifi are loading and I am even able to scan for wireless networks; however, I cannot connect to any networks. Any ideas? Let me know if you need any output. thanks in advance! -Hunter A.