fredmyra

emerge_info_rosegarden-17.12.1-media_kitemerge_pqv_rosegarden-17.12.1-media_kitcomplete_build_log Beguinner here in Funtoo ! I was able to install Rosegarden Rosegarden-21.1 thanks to the gracious help of cardinal in [URL]https://forums.funtoo.org/topic/5027-solved-compiling-rosegarden-fails/[/URL] Today I did: [CODE] chroot # ego sync chroot # emerge -auDN @world [/CODE] and got an error message after mention of a long list of errors during the install of rosegarden 17.12.1 which would have been the 50th package installed under the update. I am assuming, but not sure, that the remaining 6 packages were not installed. I am enclosing the last lines in the output of [CODE]emerge -auDN @world[/CODE] as well as the relevant part of that of [CODE]emerge --depclean[/CODE] which I issued immediately after, and the log info required.. I suspect that there is a simple explanation to this, related to the way I achieved the initial installation of Rosegarden-21.1. But I am not able to sort this out by myself. I think the solution may be something like repeating the part of cardinal's solution to the above mentioned thread - up to the rebuilding of the manifest - and then either update rosegarden or build/install it again, it should not be a big job. But this is all guessing on my part and I would not know how to consider the eventual choice between updating and re-emerging/building/installing. error_messages

Tested ! Rosegarden upp and running. Had just to: modprobe snd-seq-midi. This is solved.

MANY thanks! I would never figure this out ! I like funtoo !!!!!!

Emerge --search locates version 17.12.1 Is it meant to download sources from their website ?

I installed Funtoo_Gnome in my Fujitsu Esprimo, but I could not get used to Gnome's functionality - I have been using XFCE for most of my Linux live. So I installed the Xfce desktop and proceeded to install the programs I needed. It went perfectly with almost all programs: LibreOffice, Audacity, Firefox, Musescore, Gimp, VLC and a few minor others, with the exception of Rosegarden. I then tried to install Rosegarden on my Lifebook's Funtoo, originally installed with XFCE and got the same error with minor differences in the output. I am enclosing the files mentioned in the emerge message for both instances. Although I am just as depending on Rosegarden as I am on XFCE, this is no urgent matter. I still have alternative options to run Rosegarden whenever I need. But I will love to run Rosegarden on my Funtoos sometime. build.log.rosegarden.esprimo emerge_info_rosegarden.esprimo emerge_pqv_rosegarden.esprimo rosegarde_esprimo_build.log rosegarden_esprimo_owners rosegarden_info_esprimo

setxkbmap -option grp:switch,grp:alt_shift_toggle After much searching the confortable solution I found was in https://docs.slackware.com/howtos:window_managers:keyboard_layout_in_xfce : I enclose a summary of tips I found through my searching, hoping that it may be useful xfce_keymaps.pdf

I have just installed Funtoo on my Fujitsu Esprimo E and during post installation have been trying to use the swedish keymap, under XFCE, without success. I suspected it was due to my limited experience, but after googling a longer while I got the impression that many have had similar problems. It works well in the console though - "keymap=sv/latin1" in/etc/conf.d/keymaps.. My /etc/console.gen says: en_US.UTF-8 UTF-8 C.UTF-8 UTF-8 sv_SE.UTF-8 UTF-8 pt_BR.UTF-8 UTF-8 zh_CN.UTF-8 UTF-8 eselect locale list Available targets for the LANG variable: [1] C [2] C.utf8 [3] POSIX [4] en_US.utf8 [5] pt_BR.utf8 [6] sv_SE.utf8 * [7] zh_CN.utf8 [ ] (free form) Settings > Keyboard show Swedish as first choice, "Use system default" is ON. The apparently best answer I found was on https://forums.funtoo.org/topic/4879-polish-locales-it-might-be-helpful/#comment-17030 . I did not dare tampering with make.conf, as advised on that thread, so that may be something to consider. Otherwise I think my settings correspond to what it is avised there. I tried login out of Desktop and then login out again from console and login in and starting Xfce, again but no effect.. Same for rebooting. Hmmmmm!!!!! .... I did NOT try shutting down ???? But now I will post this, as I don't know how to save a post. Will try shutting down immediately after posting and if it works will report immediately thereafter. epro_show

I have been using Funtoo on a trial basis for several weeks and I feel great about it. I am a frequent user of Rosegarden and must have it on a distro If am to establish it as my daily-use distro. I tried to emerge it but <emerge --search> did not find it. Is it possible to install it somehow ? Perhaps compiling from sources ???? I have very little experience of /building/compiling but I have had success most of the few times I tried, and recently I compiled Rosegarden under Slackware Live. In some of my distros which don´t offer MuseScore I have been able to download its app version and run it with success, but I don't think Rosegarden is offered in app format. Although I am not familiar with Flatpak and Snap I have been able to get some program (forgot which one) from one of them but I am under the impression that Funtoo does not use them (???). Thanks for a nice distro !

thank you drobbins !

I have succeeded in my first attempt to install Funtoo. And I have also managed to install another Linux distro in dual boot. Would it be possible to install it on a machine which has already several other Linux distros on it ? I am asking this question because I am not sure about the boot partition. I believe that it might be possible to install without a boot partition, but I have no idea what that would really mean and imply. I Fike funtoo and I think that in time it might become my preferred or "main" distribution. I had Sabayon as my preferred distro untill its end. It was perfect for me. AT the moment I have Funtoo running from an external HD, but I would like to have it on the internal HD of my multiboot machine also.

Done, and fine ? Thank you for your help !

Thanks cardinal! I understand this and it sounds good. But I will try it tomorrow, ´cause now I am having trouble concentrating. Too Tired.

Yes! I tried to follow the installation guide very carefully. Did the install 3 times because of small mistakes.

I insisted and by pressing several keys I was finally able to proceed to log in. But I still would appreciate help on the modem issue. I noticed that during booting it was reported that " scanning for e1000 .... loaded" but I don´t know if it means anything of interest.

Hi ! Newbie here, has just finished my first Funtoo install and got it to boot all the way to login, but it stopped there with the message shown in the screenpic enclosed as "meddelande.png". Below, some hardware info in hope you can tip me on what can be done. lspci: 00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09) 00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation 7 Series/C216 Chipset Family MEI Controller #1 (rev 04) 00:16.3 Serial controller: Intel Corporation 7 Series/C210 Series Chipset Family KT Controller (rev 04) 00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (Lewisville) (rev 04) 00:1a.0 USB controller: Intel Corporation 7 Series/C216 Chipset Family USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation 7 Series/C216 Chipset Family High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation 7 Series/C216 Chipset Family PCI Express Root Port 1 (rev c4) 00:1c.2 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 (rev c4) 00:1d.0 USB controller: Intel Corporation 7 Series/C216 Chipset Family USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation QM77 Express Chipset LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation 7 Series/C216 Chipset Family SMBus Controller (rev 04) 02:00.0 Network controller: Intel Corporation Centrino Advanced-N 6235 (rev 24) lshw network: *-network description: Ethernet interface product: 82579LM Gigabit Network Connection (Lewisville) vendor: Intel Corporation physical id: 19 bus info: pci@0000:00:19.0 logical name: enp0s25 version: 04 serial: 74:2b:62:87:8c:e0 size: 100Mbit/s capacity: 1Gbit/s width: 32 bits clock: 33MHz capabilities: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=5.10.61-gentoo-x86_64 duplex=full firmware=0.13-4 ip=192.168.0.111 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:27 memory:f0600000-f061ffff memory:f063b000-f063bfff ioport:2080(size=32) *-network description: Wireless interface product: Centrino Advanced-N 6235 vendor: Intel Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: wlp2s0 version: 24 serial: c4:d9:87:a3:34:82 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=5.10.61-gentoo-x86_64 firmware=18.168.6.1 6000g2b-6.ucode latency=0 link=no multicast=yes wireless=IEEE 802.11 resources: irq:30 memory:f0500000-f0501fff Attachments 00_19.0 and 00_1c.2 are listings from /sys/devices/pci0000\....... for the 2 devices in the error message. I am liking the Funtoo way ? full_lshw_listing 00_19.0 00_1c.2