da.ferri

Yes, I use dhcpcd as default because I have many problems to connect at my university network. Funtoo's installation guide .

Yes, it works... seems to be resolved and the connection is stable. Funtoo davide # ls -al /etc/init.d/netif.eth0 ls: impossibile accedere a /etc/init.d/netif.eth0: File o directory non esistente Funtoo davide # cat /etc/conf.d/netif.eth0 cat: /etc/conf.d/netif.eth0: File o directory non esistente Funtoo davide # lsmod | grep r8169 r8169 90112 0 mii 16384 1 r8169 netif.eth0 -> no file or directory(maybe I've missed something during configuration?)

I've whitelisted r8169 because I need LAN just right now. So here it's the output with r8169 enabled: Funtoo davide # lsmod r8169 Usage: lsmod Funtoo davide # dmesg | grep r8169 [ 14.734630] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 14.734640] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control [ 14.744984] r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xffffa55980cfd000, 68:f7:28:aa:4d:f7, XID 10900800 IRQ 48 [ 14.744987] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 17.037973] r8169 0000:02:00.0: firmware: direct-loading firmware rtl_nic/rtl8168g-3.fw [ 17.054149] r8169 0000:02:00.0 eth0: link down [ 17.054149] r8169 0000:02:00.0 eth0: link down [ 19.864899] r8169 0000:02:00.0 eth0: link up Funtoo davide # ip addr 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 brd 127.255.255.255 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 68:f7:28:aa:4d:f7 brd ff:ff:ff:ff:ff:ff inet 192.168.1.203/24 brd 192.168.1.255 scope global dynamic noprefixroute eth0 valid_lft 86134sec preferred_lft 86134sec inet6 fe80::bf4f:f610:4421:7a0d/64 scope link noprefixroute valid_lft forever preferred_lft forever 3: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000 link/ether 92:20:ac:da:61:28 brd ff:ff:ff:ff:ff:ff

davide@Funtoo ~ $ sudo lspci -k | grep Ethernet 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 10) Subsystem: Lenovo RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller Kernel modules: r8169

As said in the first post the r8169 module has been blacklisted and in the emerge --info that I've posted there isn't a voice about the kernel, that is the debian-sources installed when i put the command emerge -auvDN @world.

Hi everyone, I'm new to Funtoo and I have some problems with the install of the module r8168, I also have blacklisted r8169, but the installation continues to fail... Here is the output of r8168.txt And the output of emerge --info.txt Thanks in advance! emerge_info.txt r8168.txt