pascalbrax
-
Posts
12 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Posts posted by pascalbrax
-
-
During my upgrade from 1.3 to 1.4 I got an error while running the command:
# emerge -auDN @world --jobs=3 --exclude dev-lang/perlSo i got the error "Package 'dev-db/mysql-connector-c-8.0.16' NOT merged due to file collisions."
The detected file is /usr/lib64/pkgconfig/mysqlclient.pc
I checked with "portageq" who's the owner and looks like it's dev-db/mysql-5.7.23
Not sure if it's an human mistake (me) or if it's a portage bug...
-
Hello,
I was going finally to update my ego profile to 1.3 following this guide: https://www.funtoo.org/Upgrade_Instructions/1.3-release
I've followed every step and checked that it worked as intended.
I've just done the this step now (succesfully):
emerge -auDN @system --ignore-worldNow, the next step would to to run
emerge -auDN @worldBut this one, it fails spectacularly...
These are the packages that would be merged, in order: Calculating dependencies .. ....... ...... ...... done! [ebuild U ] x11-misc/util-macros-1.19.2-r1 [1.19.1] [ebuild U ] media-libs/opus-1.3 [1.2.1] [ebuild U ] dev-libs/oniguruma-6.9.0 [6.7.0] [ebuild U ] dev-lang/go-1.11.4 [1.10.7] [ebuild R ] dev-libs/lzo-2.10 [2.10] ABI_X86="(-32*)" [ebuild U ] dev-util/re2c-1.1.1 [1.0.3] [ebuild N ] dev-cpp/tbb-2018.20180312 USE="-debug -doc -examples" [ebuild U ] dev-libs/libpthread-stubs-0.4-r1 [0.4] [ebuild U ] sys-devel/autoconf-archive-2018.03.13 [2017.09.28] [ebuild N ] dev-util/netsurf-buildsystem-1.7 [ebuild U ] sys-devel/llvm-common-7.0.0 [6.0.0] [ebuild N ] app-crypt/argon2-20171227 USE="-static-libs" [ebuild UD ] app-arch/lzip-1.20 [1.21] [ebuild U ] media-fonts/liberation-fonts-2.00.1-r3 [2.00.1-r2] [ebuild U ] sys-process/lsof-4.91 [4.89-r1] [ebuild U ] media-sound/id3-0.15-r1 [0.15] [ebuild UD ] app-arch/unrar-5.6.8 [5.7.1] [ebuild UD ] sys-kernel/linux-firmware-20181026 [20190118] [ebuild U ] virtual/ttf-fonts-1-r1 [1] [ebuild N ] dev-libs/libutf8proc-2.2.0_p1-r1 [ebuild U ] sys-fs/ddrescue-1.23 [1.22-r1] [ebuild UD ] net-misc/rclone-1.43.1 [1.45] [ebuild U ] dev-libs/fribidi-1.0.5 [0.19.7] [ebuild U ] sys-fs/ncdu-1.13 [1.12] [ebuild UD ] app-forensics/lynis-2.6.4 [2.7.0] [ebuild U ] dev-libs/gobject-introspection-common-1.58.1 [1.54.1] [ebuild U ] dev-libs/vala-common-0.42.3 [0.38.4] [ebuild U ] media-libs/libpng-1.6.35-r1 [1.6.34] [ebuild U ] media-libs/giflib-5.1.4-r2 [5.1.4] [ebuild U ] media-libs/t1lib-5.1.2-r2 [5.1.2-r1] [ebuild U ] media-libs/freetype-2.9.1-r4 [2.8] [ebuild N ] sys-libs/slang-2.3.2 USE="pcre png readline zlib -cjk -static-libs" [ebuild U ] virtual/logger-0-r1 [0] [ebuild U ] dev-libs/libbsd-0.9.1 [0.8.6] [ebuild UD ] sys-power/acpid-2.0.30 [2.0.31] [ebuild N ] media-libs/ladspa-sdk-1.13-r2 [ebuild U ] media-libs/libmp4v2-2.0.0-r1 [2.0.0] [ebuild U ] media-video/rtmpdump-2.4_p20161210-r2 [2.4_p20161210-r1] [ebuild UD ] dev-libs/libverto-0.2.6 [0.3.0] [ebuild U ] dev-lang/nasm-2.13.03-r1 [2.13.01] [ebuild UD ] sys-apps/lm_sensors-3.4.0_p20180923 [3.5.0] [ebuild UD ] dev-libs/icu-60.2 [63.1-r1] [ebuild U ] media-libs/libvorbis-1.3.6 [1.3.5] [ebuild U ] media-libs/libmad-0.15.1b-r9 [0.15.1b-r8] [ebuild U ] media-libs/libdc1394-2.2.5-r1 [2.2.5] [ebuild N ] app-text/htmltidy-20090325-r2 USE="-debug -doc -static-libs" [ebuild U ] dev-libs/geoip-1.6.12 [1.6.11] [ebuild U ] media-sound/wavpack-5.1.0-r1 [5.1.0] [ebuild N ] media-libs/gavl-1.4.0-r1 USE="-doc -static-libs" [ebuild U ] dev-libs/libmspack-0.9_alpha [0.8_alpha] [ebuild U ] sys-libs/libunwind-1.2.1-r2 [1.2.1] [ebuild U ] dev-libs/nspr-4.20 [4.19] [ebuild R ] x11-libs/pixman-0.34.0 [0.34.0] ABI_X86="(-32*)" [ebuild N ] dev-libs/libsodium-1.0.16-r2 USE="asm urandom -minimal -static-libs" CPU_FLAGS_X86="aes sse4_1" [ebuild N ] dev-libs/libzip-1.3.0 USE="bzip2 -static-libs" [ebuild UD ] app-misc/jq-1.5-r3 [1.6-r2] [ebuild U ] net-misc/ntp-4.2.8_p12 [4.2.8_p11] [ebuild U ] dev-lang/tcl-8.6.8 [8.6.7] [ebuild U ] media-libs/libtheora-1.1.1-r2 [1.1.1-r1] [ebuild U ] dev-util/google-perftools-2.7 [2.6.3] [ebuild UD ] app-arch/cabextract-1.9 [1.9-r2] [ebuild U ] dev-libs/leveldb-1.20 [1.18-r2] USE="-test%" [ebuild U ] media-sound/lame-3.100-r1 [3.100] [ebuild N ] media-libs/libsamplerate-0.1.9 USE="sndfile -static-libs" [ebuild U ] dev-libs/libconfig-1.7.2 [1.7.1] [ebuild U ] media-libs/libvpx-1.7.0 [1.6.1] [ebuild U ] dev-util/ninja-1.8.2-r2 [1.8.2] [ebuild UD ] dev-python/configargparse-0.12.0 [0.13.0] [ebuild U ] dev-util/scons-3.0.1-r100 [2.5.1] USE="-test%" PYTHON_TARGETS="python3_6%* -python3_4% -python3_5%" [ebuild U ] sys-libs/libcap-ng-0.7.9 [0.7.8] [ebuild U ] sys-process/htop-2.2.0 [2.0.2] PYTHON_SINGLE_TARGET="python3_6%* -python2_7% -python3_4% -python3_5% -python3_7%" PYTHON_TARGETS="python2_7%* python3_6%* -python3_4% -python3_5% -python3_7%" [ebuild N ] x11-base/xcb-proto-1.13 PYTHON_TARGETS="python2_7 python3_6 -python3_4 -python3_5" [ebuild U ] net-dns/bind-tools-9.12.2_p2-r1 [9.11.2_p1] USE="-libedit% -libidn2%" [ebuild R ] app-crypt/mit-krb5-1.16.1 USE="-keyutils*" [ebuild U ] sys-libs/binutils-libs-2.31.1-r1 [2.30-r4] [ebuild U ] dev-libs/libcdio-2.0.0-r1 [2.0.0] [ebuild U ] media-libs/libmtp-1.1.16 [1.1.14] [ebuild U ] net-misc/whois-5.4.0 [5.2.20] [ebuild UD ] www-client/lynx-2.8.9_pre16 [2.8.9_p1] [ebuild U ] media-libs/libexif-0.6.21-r2 [0.6.21-r1] [ebuild UD ] sys-apps/keyutils-1.5.11-r1 [1.6] [ebuild U ] sys-devel/automake-1.13.4-r2 [1.13.4-r1] USE="-test%" [ebuild U ] media-libs/libjpeg-turbo-2.0.1 [1.5.3] [ebuild U ] media-libs/x265-2.9 [2.6] [ebuild U ] media-libs/game-music-emu-0.6.2 [0.6.1] [ebuild U ] media-gfx/graphite2-1.3.12-r1 [1.3.10] [ebuild N ] dev-cpp/eigen-3.3.5-r1 USE="openmp (-altivec) -c++11 -cuda -debug -doc (-neon) -test" [ebuild U ] dev-libs/tinyxml2-6.2.0 [6.0.0] [ebuild NS ] sys-devel/llvm-7.0.0-r1 [5.0.1] USE="libffi ncurses xml -debug -doc -exegesis -gold -libedit -test -xar" LLVM_TARGETS="AMDGPU BPF NVPTX (X86) -AArch64 -ARM -Hexagon -Lanai -MSP430 -Mips -PowerPC -Sparc -SystemZ -XCore" [ebuild N ] net-libs/libssh2-1.8.0-r2 USE="zlib -gcrypt -libressl -mbedtls" [ebuild U ] media-libs/openal-1.19.1 [1.18.2-r1] USE="-sdl%" [ebuild R ] virtual/jpeg-0-r2 [0-r2] ABI_X86="(-32*)" [ebuild U ] media-libs/libmediainfo-18.08.1 [17.12] [ebuild NS ] virtual/jpeg-62 [0-r2] [ebuild U ] media-libs/libwebp-1.0.0 [0.6.1] [ebuild U ] media-libs/jasper-2.0.14 [2.0.12] USE="-test%" [ebuild U ] media-video/mediainfo-18.08.1 [17.12] [ebuild U ] media-libs/tiff-4.0.10 [4.0.9] USE="webp%* -zstd%" [ebuild U ] media-libs/openjpeg-2.3.0-r1 [2.3.0] [ebuild UD ] virtual/python-funcsigs-1 [2] [ebuild UD ] dev-libs/apr-1.5.2 [1.6.3] [ebuild U ] dev-libs/apr-1.6.5 [1.6.3] [ebuild N ] sys-auth/realtime-base-0.1 [ebuild UD ] net-fs/cifs-utils-6.8 [6.8-r1] USE="caps-ng%*" [ebuild U ] sys-fs/mdadm-4.1 [4.0] [ebuild U ] dev-libs/apr-util-1.6.1-r3 [1.6.1] [ebuild N ] media-sound/jack-audio-connection-kit-0.125.0 USE="pam -alsa (-altivec) (-coreaudio) -debug -doc -examples -oss" CPU_FLAGS_X86="sse -3dnow" [ebuild U ] sys-block/parted-3.2_p20-r1 [3.2-r2] [ebuild N ] virtual/jack-0 [ebuild U ] www-servers/apache-2.4.38-r1 [2.4.38] [ebuild UD ] net-vpn/tor-0.3.5.4_alpha [0.4.0.1_alpha] [ebuild UD ] sys-libs/ldb-1.4.3 [1.4.4] [ebuild U ] sys-apps/smartmontools-6.6-r1 [6.6] [ebuild U ] sys-boot/efibootmgr-16 [15] [ebuild UD ] app-misc/neofetch-5.0.0 [6.0.0] [ebuild U ] sys-boot/grub-2.02-r3 [2.02-r1] [ebuild N ] dev-util/meson-0.48.2 PYTHON_TARGETS="python3_6 -python3_5 -python3_7" [ebuild N ] dev-python/numpy-1.14.5 USE="-doc -lapack -test" PYTHON_TARGETS="python2_7 python3_6 -python3_4 -python3_5 -python3_7" [ebuild UD ] dev-python/pygments-2.2.0-r1 [2.3.1] [ebuild N ] dev-python/markupsafe-1.0 PYTHON_TARGETS="python2_7 python3_6 -pypy -pypy3 -python3_4 -python3_5 -python3_7" [ebuild UD ] net-misc/youtube-dl-2018.10.29 [2019.01.27] USE="offensive%* -test%" [ebuild UD ] dev-python/lxml-4.2.5 [4.3.0] [ebuild UD ] dev-python/zope-interface-4.5.0 [4.6.0] [ebuild U ] x11-libs/libdrm-2.4.94 [2.4.83] [ebuild N ] dev-python/mako-1.0.7 USE="-doc -test" PYTHON_TARGETS="python2_7 python3_6 -pypy -pypy3 -python3_4 -python3_5 -python3_7" [ebuild U ] dev-vcs/subversion-1.11.0 [1.9.7-r1] [ebuild U ] app-eselect/eselect-php-0.9.5 [0.9.4-r5] USE="fpm*" [ebuild N ] app-eselect/eselect-rust-0.3_pre20150428 [ebuild U ] x11-libs/libva-2.2.0 [1.8.3] [ebuild N ] dev-lang/rust-bin-1.32.0 USE="-clippy -doc -libressl -rustfmt" CPU_FLAGS_X86="sse2" [ebuild UD ] app-admin/sudo-1.8.25_p1-r1 [1.8.27] [ebuild N ] virtual/rust-1.32.0 [ebuild UD ] app-crypt/acme-0.28.0 [0.30.1] [ebuild N ] virtual/cargo-1.32.0 [ebuild UD ] app-crypt/certbot-0.28.0 [0.30.1-r1] [ebuild UD ] mail-client/mutt-1.10.1-r1 [1.11.2-r1] [ebuild U ] x11-base/xorg-proto-2018.4_p20180627-r2 [2018.4-r1] [ebuild N ] x11-proto/xextproto-7.3.0 [ebuild N ] x11-proto/videoproto-2.3.3 [ebuild N ] x11-proto/compositeproto-0.4.2 [ebuild N ] x11-proto/resourceproto-1.2.0 [ebuild N ] x11-proto/xineramaproto-1.2.1 [ebuild N ] x11-proto/dri3proto-1.2 [ebuild N ] x11-proto/fixesproto-5.0 [ebuild N ] x11-proto/xproxymngproto-1.0.3 [ebuild N ] x11-proto/lg3dproto-5.0 [ebuild N ] x11-proto/xf86rushproto-1.2.2 [ebuild N ] x11-proto/xf86miscproto-0.9.3 [ebuild N ] x11-proto/xcalibrateproto-0.1.0 [ebuild N ] x11-proto/xf86dgaproto-2.1 [ebuild N ] x11-proto/bigreqsproto-1.1.2 [ebuild N ] x11-proto/xf86driproto-2.1.1 [ebuild N ] x11-proto/inputproto-2.3.2 [ebuild N ] x11-proto/trapproto-3.4.3 [ebuild N ] x11-proto/presentproto-1.2 [ebuild N ] x11-proto/xf86vidmodeproto-2.3.1 [ebuild N ] x11-proto/windowswmproto-1.0.4 [ebuild N ] x11-proto/randrproto-1.6.0 [ebuild N ] x11-proto/applewmproto-1.4.2 [ebuild N ] x11-proto/damageproto-1.2.1 [ebuild N ] x11-proto/renderproto-0.11.1 [ebuild N ] x11-proto/dmxproto-2.3.1 [ebuild N ] x11-proto/printproto-1.0.5 [ebuild N ] x11-proto/kbproto-1.0.7 [ebuild N ] x11-proto/xproto-7.0.32 [ebuild N ] x11-proto/xf86bigfontproto-1.2.0 [ebuild N ] x11-proto/evieproto-1.1.1 [ebuild N ] x11-proto/scrnsaverproto-1.2.2 [ebuild N ] x11-proto/glproto-1.4.17 [ebuild N ] x11-proto/dri2proto-2.8 [ebuild N ] x11-proto/fontcacheproto-0.1.3 [ebuild N ] x11-proto/recordproto-1.14.2 [ebuild N ] x11-proto/xcmiscproto-1.2.2 [ebuild N ] x11-proto/fontsproto-2.1.3 [ebuild U ] x11-libs/libICE-1.0.9-r2 [1.0.9-r1] [ebuild U ] x11-libs/libfontenc-1.1.3-r1 [1.1.3] [ebuild U ] x11-libs/libXdmcp-1.1.2-r2 [1.1.2-r1] [ebuild U ] x11-libs/libXau-1.0.8-r1 [1.0.8] [ebuild U ] x11-apps/bdftopcf-1.1 [1.0.5] [ebuild U ] x11-libs/libxshmfence-1.3-r1 [1.2] [ebuild U ] x11-apps/mkfontscale-1.1.3 [1.1.2] [ebuild U ] x11-libs/libxcb-1.13 [1.12-r2] [ebuild U ] x11-libs/libSM-1.2.2-r2 [1.2.2-r1] [ebuild R ] x11-libs/libX11-1.6.6 ABI_X86="(-32*)" [ebuild U ] x11-libs/libXext-1.3.3-r1 [1.3.3] [ebuild U ] x11-libs/libXt-1.1.5-r1 [1.1.5] [ebuild U ] x11-libs/libXfixes-5.0.3-r1 [5.0.3] [ebuild U ] x11-libs/libXrender-0.9.10-r1 [0.9.10] [ebuild U ] x11-libs/libxkbfile-1.0.9-r2 [1.0.9-r1] [ebuild U ] media-video/luvcview-0.2.6-r1 [0.2.6] [ebuild U ] x11-libs/libXmu-1.1.2-r1 [1.1.2] [ebuild U ] x11-libs/libXdamage-1.1.4-r2 [1.1.4-r1] [ebuild U ] x11-libs/libXxf86vm-1.1.4-r1 [1.1.4] [ebuild U ] x11-libs/libXi-1.7.9-r1 [1.7.9] [ebuild U ] x11-libs/libXpm-3.5.12-r1 [3.5.12] [ebuild N ] x11-libs/libXrandr-1.5.1-r1 USE="-static-libs" [ebuild U ] x11-apps/xkbcomp-1.4.2 [1.4.0] [ebuild U ] x11-libs/libXaw-1.0.13-r1 [1.0.13] [ebuild U ] x11-libs/libXtst-1.2.3-r1 [1.2.3] [ebuild U ] x11-apps/xmessage-1.0.5 [1.0.4] [ebuild U ] media-libs/fontconfig-2.13.0-r4 [2.12.4] [ebuild UD ] app-text/ghostscript-gpl-9.25-r1 [9.26] [ebuild U ] x11-libs/libXft-2.3.2-r1 [2.3.2] [ebuild U ] media-libs/gd-2.2.5-r1 [2.2.5] [ebuild U ] x11-terms/xterm-337 [331] [ebuild NS ] dev-lang/php-7.2.12 [5.6.40, 7.3.1] USE="acl apache2 argon2 berkdb bzip2 cgi cli ctype curl exif fileinfo filter fpm gd gdbm gmp hash iconv intl ipv6 json mysql mysqli nls opcache pcntl pdo phar posix readline session simplexml sockets sodium spell sqlite ssl threads tidy tokenizer truetype unicode webp xml xmlreader xmlrpc xmlwriter xslt zip zip-encryption zlib -bcmath -calendar -cdb -cjk -coverage -debug -embed -enchant -firebird -flatfile -ftp -imap -inifile -iodbc -kerberos -ldap -ldap-sasl -libedit -libressl -lmdb -mhash -mssql -oci8-instant-client -odbc -phpdbg -postgres -qdbm -recode (-selinux) -session-mm -sharedmem -snmp -soap -systemd -sysvipc -test -tokyocabinet -wddx -xpm" [ebuild UD ] dev-lang/php-5.6.38 [5.6.40] USE="cgi* fpm* pcntl* spell* tidy* xmlrpc*" [ebuild UD ] app-dicts/aspell-en-2017.01.22.0 [2018.04.16.0] [ebuild R ] dev-php/pecl-geoip-1.1.1-r4 [1.1.1-r4] PHP_TARGETS="(-php7-3%)" [ebuild NS ] virtual/httpd-php-7.2 [7.3] [ebuild U ] x11-libs/cairo-1.16.0-r1 [1.14.12] USE="-utils%" [ebuild N ] dev-util/glib-utils-2.58.3 [ebuild UD ] app-misc/mc-4.8.21 [4.8.22] [ebuild U ] x11-libs/gdk-pixbuf-2.38.0 [2.36.11] USE="-doc%" [ebuild U ] dev-python/pycairo-1.17.0-r1 [1.15.1] PYTHON_TARGETS="-pypy% -pypy3% -python3_7%" [ebuild U ] media-libs/gstreamer-1.14.4 [1.12.3] [ebuild U ] dev-libs/libsigc++-2.10.1 [2.10.0] [ebuild U ] media-libs/harfbuzz-2.1.1 [1.7.5] [ebuild R ] dev-libs/libcroco-0.6.12-r1 ABI_X86="(-32*)" [ebuild U ] media-libs/libwmf-0.2.8.4-r7 [0.2.8.4-r6] [ebuild U ] x11-libs/pango-1.42.4 [1.40.14-r1] [ebuild U ] gnome-base/librsvg-2.45.0 [2.40.20] [ebuild U ] media-gfx/imagemagick-7.0.8.14 [7.0.7.21] USE="-heif%" [ebuild U ] app-editors/vim-core-8.1.1092 [8.1.0847] [ebuild U ] app-editors/vim-8.1.1092 [8.1.0847] [ebuild N ] sys-fs/fuse-common-3.2.6 [ebuild U ] sys-fs/fuse-2.9.8 [2.9.7] [blocks b ] <sys-fs/fuse-2.9.7-r1:0 ("<sys-fs/fuse-2.9.7-r1:0" is blocking sys-fs/fuse-common-3.2.6) [ebuild U ] sys-fs/ntfs3g-2017.3.23-r1 [2017.3.23] [ebuild U ] sys-fs/mtpfs-1.1-r4 [1.1-r3] [ebuild U ] media-libs/mesa-18.2.8 [17.2.8] USE="-lm_sensors% -test%" [uninstall ] app-eselect/eselect-mesa-0.0.10-r1 [blocks b ] app-eselect/eselect-mesa ("app-eselect/eselect-mesa" is blocking media-libs/mesa-18.2.8) [ebuild U ] virtual/opengl-7.0-r2 [7.0-r1] [ebuild N ] media-libs/opencv-3.4.1-r4 USE="eigen ffmpeg ieee1394 jpeg jpeg2k openmp png python threads tiff v4l webp -contrib -contrib_cvv -contrib_dnn -contrib_hdf -contrib_sfm -contrib_xfeatures2d -cuda -debug -dnn_samples -examples -gdal -gflags -glog -gphoto2 -gstreamer -gtk -java -lapack (-libav) -opencl -openexr -opengl -pch -qt5 -tesseract -testprograms -vaapi -vtk -xine" CPU_FLAGS_X86="avx popcnt sse sse2 sse3 sse4_1 sse4_2 ssse3 -avx2 -fma3" PYTHON_TARGETS="python2_7 python3_6 -python3_4 -python3_5" [ebuild N ] media-plugins/frei0r-plugins-1.6.1.20190222 USE="facedetect scale0tilt -doc" [ebuild U ] media-video/ffmpeg-3.4.5 [3.4.1] USE="frei0r* jack* ladspa* -libdrm% -opencl%" [ebuild U ] media-video/motion-4.1.1-r1 [4.0.1-r2] USE="sqlite%* webp%*" !!! Multiple package instances within a single package slot have been pulled !!! into the dependency graph, resulting in a slot conflict: dev-libs/apr:1 (dev-libs/apr-1.6.5:1/1.6::dev-kit, ebuild scheduled for merge) pulled in by >=dev-libs/apr-1.6.2:1= required by (dev-libs/apr-util-1.6.1-r3:1/1::dev-kit, ebuild scheduled for merge) ^^ ^^^^^^^^ (dev-libs/apr-1.5.2:1/1::dev-kit, ebuild scheduled for merge) pulled in by dev-libs/apr:1/1= required by (net-libs/serf-1.3.9:1/1::net-kit, installed) ^^^^^ (and 1 more with the same problem) dev-libs/icu:0 (dev-libs/icu-63.1-r1:0/63.1::core-kit, installed) pulled in by >=dev-libs/icu-51.2-r1:0/63.1=[-mgorny(-)] required by (dev-libs/libxml2-2.9.8-r1:2/2::core-kit, installed) ^^^^^^^^ (and 4 more with the same problem) (dev-libs/icu-60.2:0/60.2::core-kit, ebuild scheduled for merge) pulled in by <dev-libs/icu-61.1:= required by (dev-lang/php-5.6.38:5.6/5.6::core-server-kit, ebuild scheduled for merge) ^ ^^^^ ^ dev-libs/leveldb:0 (dev-libs/leveldb-1.20:0/1::dev-kit, ebuild scheduled for merge) pulled in by (no parents that aren't satisfied by other packages in this slot) (dev-libs/leveldb-1.18-r2:0/0::gentoo, installed) pulled in by dev-libs/leveldb:0/0= required by (games-action/minetest-0.4.17.1:0/0::games-kit, installed) ^^^^^ media-libs/libvpx:0 (media-libs/libvpx-1.7.0:0/5::media-kit, ebuild scheduled for merge) pulled in by (no parents that aren't satisfied by other packages in this slot) (media-libs/libvpx-1.6.1:0/4::media-kit, installed) pulled in by media-libs/libvpx:0/4= required by (media-libs/avidemux-plugins-2.7.0:2.7/2.7::media-kit, installed) ^^^^^ media-libs/x265:0 (media-libs/x265-2.9:0/165::media-kit, ebuild scheduled for merge) pulled in by (no parents that aren't satisfied by other packages in this slot) (media-libs/x265-2.6:0/146::media-kit, installed) pulled in by media-libs/x265:0/146= required by (media-libs/avidemux-plugins-2.7.0:2.7/2.7::media-kit, installed) ^^^^^^^ NOTE: Use the '--verbose-conflicts' option to display parents omitted above It may be possible to solve this problem by using package.mask to prevent one of those packages from being selected. However, it is also possible that conflicting dependencies exist such that they are impossible to satisfy simultaneously. If such a conflict exists in the dependencies of two different packages, then those packages can not be installed simultaneously. You may want to try a larger value of the --backtrack option, such as --backtrack=30, in order to see if that will solve this conflict automatically. For more information, see MASKED PACKAGES section in the emerge man page or refer to the Gentoo Handbook.
so, now I'm unsure about how to proceed...
I also noticed there's a lot of ebuilds that are actually a *downgrade* from the previous 1.2 release? Is that correct?
cheers.
-
Have you checked if distcc is a valid option for your case?
-
is distcc to distribute compiling jobs still a valid option for funtoo or is it deprecated?
-
I have installed two network cards on my system.
One card is connected to a switch, while the second card is connected to a bridged modem.
the configuration looks like this:
eth0 -> switch -> DLS modem -> internet eth1 -> bridge modem -> internet
eth0 gets its IP (local) by the DSL modem, which acts as DHCP server for the whole LAN.
eth1 gets its IP (public, dynamic) from the ISP directly.
this is how route -n looks like:
pascal@mira ~ $ route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0 0.0.0.0 46.126.78.1 0.0.0.0 UG 202 0 0 eth1 46.126.78.0 0.0.0.0 255.255.254.0 U 202 0 0 eth1 127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
ifconfig:
pascal@mira ~ $ ifconfig eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.1.39 netmask 255.255.255.0 broadcast 192.168.1.255 inet6 2002:5437:f2f1:0:beae:c5ff:fedf:385e prefixlen 64 scopeid 0x0<global> inet6 fe80::beae:c5ff:fedf:385e prefixlen 64 scopeid 0x20<link> ether bc:ae:c5:df:38:5e txqueuelen 1000 (Ethernet) RX packets 825473 bytes 77401388 (73.8 MiB) RX errors 0 dropped 79 overruns 0 frame 0 TX packets 1433430 bytes 2117336429 (1.9 GiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 eth0:0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.0.39 netmask 255.255.255.0 broadcast 192.168.0.255 ether bc:ae:c5:df:38:5e txqueuelen 1000 (Ethernet) eth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 46.126.79.24 netmask 255.255.254.0 broadcast 255.255.255.255 inet6 fe80::41d9:9455:2d1e:97f prefixlen 64 scopeid 0x20<link> ether 00:e0:4c:21:0a:01 txqueuelen 1000 (Ethernet) RX packets 81227 bytes 4890805 (4.6 MiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 2611 bytes 234196 (228.7 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10<host> loop txqueuelen 0 (Local Loopback) RX packets 114266 bytes 67619893 (64.4 MiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 114266 bytes 67619893 (64.4 MiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0and inxi:
pascal@mira ~ $ inxi -n Network: Card-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller driver: r8169 IF: eth1 state: up speed: 1000 Mbps duplex: full mac: 00:e0:4c:21:0a:01 Card-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller driver: r8169 IF: eth0 state: up speed: 1000 Mbps duplex: full mac: bc:ae:c5:df:38:5e pascal@mira ~ $ inxi -i Network: Card-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller driver: r8169 IF: eth1 state: up speed: 1000 Mbps duplex: full mac: 00:e0:4c:21:0a:01 Card-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller driver: r8169 IF: eth0 state: up speed: 1000 Mbps duplex: full mac: bc:ae:c5:df:38:5e WAN IP: 84.55.242.241 IF: eth0 ip-v4: 192.168.0.39 ip-v6-link: fe80::beae:c5ff:fedf:385e IF: eth1 ip-v4: 46.126.79.24 ip-v6-link: fe80::41d9:9455:2d1e:97fThe problem is that the connection on eth1 seems very unreliable.
Sometimes it works, I can ping it from the internet, I can access apache hosts. Sometimes it simply doesn't respond, sometims inxi hangs at the IP part, sometimes it seems not working at all.
From inside the machine, now I can't even use the interface.
pascal@mira /var/www/comdox.ch/comuneparadiso/mundelibere/db $ curl ifconfig.co --interface eth0 my.public.ip.here pascal@mira /var/www/comdox.ch/comuneparadiso/mundelibere/db $ curl ifconfig.co --interface eth1 curl: (7) Failed to connect to ifconfig.co port 80: Connection timed out
-
I'm not really sure how to proceed about this one, don't want to unmerge and emerge again something critical for my system...
These are the packages that would be merged, in order: Calculating dependencies... done! [ebuild U ] app-arch/lzip-1.19 [1.19_pre1] [ebuild N ] virtual/pkgconfig-0-r1 ABI_X86="32 (64) (-x32)" [ebuild UD ] sys-apps/keyutils-1.5.9-r4 [1.5.10] [ebuild UD ] dev-python/pyrsistent-0.12.0 [0.12.1] [ebuild U ] app-crypt/acme-0.18.1 [0.18.0] [ebuild U ] app-crypt/certbot-0.18.1 [0.18.0] [ebuild U ] dev-libs/libxml2-2.9.4-r2 [2.9.4-r1] PYTHON_TARGETS="-python3_6%" [ebuild UD ] x11-misc/util-macros-1.19.0 [1.19.1] [ebuild N ] dev-util/pkgconfig-0.29.2 USE="-build -hardened" ABI_X86="(64) -32 (-x32)" [ebuild UD ] media-tv/plex-media-server-1.3.4-r1 [1.8.4] [ebuild U ] mail-client/mutt-1.9.0 [1.8.3] USE="(-prefix)" [ebuild U ] app-editors/vim-core-8.0.1092 [8.0.1071] [ebuild U ] app-editors/vim-8.0.1092 [8.0.1071] [ebuild UD ] dev-python/testtools-2.2.0 [2.3.0] [blocks B ] dev-util/pkgconfig ("dev-util/pkgconfig" is blocking dev-util/pkgconf-1.2.2) [blocks B ] dev-util/pkgconf[pkg-config] ("dev-util/pkgconf[pkg-config]" is blocking dev-util/pkgconfig-0.29.2) * Error: The above package list contains packages which cannot be * installed at the same time on the same system. (dev-util/pkgconfig-0.29.2:0/0::dev-kit, ebuild scheduled for merge) pulled in by dev-util/pkgconfig required by (media-video/luvcview-0.2.6:0/0::gentoo, installed) >=dev-util/pkgconfig-0.23 required by (x11-apps/mkfontdir-1.0.7:0/0::gentoo, installed) >=dev-util/pkgconfig-0.23 required by (media-fonts/encodings-1.0.4:0/0::gentoo, installed) >=dev-util/pkgconfig-0.23 required by (media-fonts/font-misc-misc-1.1.2:0/0::gentoo, installed) (dev-util/pkgconf-1.2.2:0/0::core-kit, installed) pulled in by dev-util/pkgconf[pkg-config,abi_x86_32(-)?,abi_x86_64(-)?,abi_x86_x32(-)?,abi_mips_n32(-)?,abi_mips_n64(-)?,abi_mips_o32(-)?,abi_ppc_32(-)?,abi_ppc_64(-)?,abi_s390_32(-)?,abi_s390_64(-)?] (dev-util/pkgconf[pkg-config,abi_x86_32(-),abi_x86_64(-)]) required by (virtual/pkgconfig-0-r1:0/0::core-kit, ebuild scheduled for merge) For more information about Blocked Packages, please refer to the following section of the Gentoo Linux x86 Handbook (architecture is irrelevant): https://wiki.gentoo.org/wiki/Handbook:X86/Working/Portage#Blocked_packagesBTW after the ego/epro switch, lots of packages are marked to "downgrade" in my portage tree.
-
What's the correct way to upgrade if I don't have a /var/git directory?
-
[...] configure: creating ./config.status config.status: creating Makefile config.status: creating src/Makefile config.status: creating src/tools/Makefile config.status: creating man/Makefile config.status: creating src/config.h config.status: executing depfiles commands >>> Source configured. >>> Compiling source in /home/tmp/portage/net-proxy/ziproxy-3.3.1-r1/work/ziproxy-3.3.1 ... make -j7 Making all in . make[1]: Entering directory '/home/tmp/portage/net-proxy/ziproxy-3.3.1-r1/work/ziproxy-3.3.1' make[1]: Nothing to be done for 'all-am'. make[1]: Leaving directory '/home/tmp/portage/net-proxy/ziproxy-3.3.1-r1/work/ziproxy-3.3.1' Making all in src make[1]: Entering directory '/home/tmp/portage/net-proxy/ziproxy-3.3.1-r1/work/ziproxy-3.3.1/src' make all-recursive make[2]: Entering directory '/home/tmp/portage/net-proxy/ziproxy-3.3.1-r1/work/ziproxy-3.3.1/src' Making all in tools make[3]: Entering directory '/home/tmp/portage/net-proxy/ziproxy-3.3.1-r1/work/ziproxy-3.3.1/src/tools' x86_64-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I../../src -march=native -O2 -pipe -c -o ziproxylogtool.o ziproxylogtool.c ziproxylogtool.c: In function ?stats_general_loop?: ziproxylogtool.c:418:3: warning: ignoring return value of ?fgets?, declared with attribute warn_unused_result [-Wunused-result] fgets (log_line, LINE_BUFFER - 1, goptions->in_file); ^ ziproxylogtool.c: In function ?stats_max_hosts?: ziproxylogtool.c:453:3: warning: ignoring return value of ?fgets?, declared with attribute warn_unused_result [-Wunused-result] fgets (log_line, LINE_BUFFER - 1, goptions->in_file); ^ ziproxylogtool.c: In function ?stats_filter_mode?: ziproxylogtool.c:476:3: warning: ignoring return value of ?fgets?, declared with attribute warn_unused_result [-Wunused-result] fgets (log_line, LINE_BUFFER - 1, goptions->in_file); ^ x86_64-pc-linux-gnu-gcc -march=native -O2 -pipe -Wl,-O1 -Wl,--sort-common -Wl,--as-needed -o ziproxylogtool ziproxylogtool.o -lpthread -lpng -ljpeg -lgif -lm -lz make[3]: Leaving directory '/home/tmp/portage/net-proxy/ziproxy-3.3.1-r1/work/ziproxy-3.3.1/src/tools' make[3]: Entering directory '/home/tmp/portage/net-proxy/ziproxy-3.3.1-r1/work/ziproxy-3.3.1/src' x86_64-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -march=native -O2 -pipe -c -o ziproxy.o ziproxy.c x86_64-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -march=native -O2 -pipe -c -o http.o http.c x86_64-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -march=native -O2 -pipe -c -o log.o log.c x86_64-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -march=native -O2 -pipe -c -o text.o text.c x86_64-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -march=native -O2 -pipe -c -o image.o image.c x86_64-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -march=native -O2 -pipe -c -o cfgfile.o cfgfile.c x86_64-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -march=native -O2 -pipe -c -o preemptdns.o preemptdns.c text.c: In function ?gunzip?: text.c:229:4: warning: ignoring return value of ?fread?, declared with attribute warn_unused_result [-Wunused-result] fread(*outbuf, *outlen, 1, file_unpack); ^ http.c: In function ?send_error?: http.c:721:6: warning: ignoring return value of ?fread?, declared with attribute warn_unused_result [-Wunused-result] fread (txtfilebuf, 1, txtfilesize, txtfile); ^ preemptdns.c: In function ?preempt_dns_from_html?: preemptdns.c:201:25: warning: ignoring return value of ?daemon?, declared with attribute warn_unused_result [-Wunused-result] daemon (0, 0); ^ http.c: In function ?read_content?: http.c:1273:5: warning: ignoring return value of ?fscanf?, declared with attribute warn_unused_result [-Wunused-result] fscanf (from, "%x", &pending_chunk_len); ^ http.c:1286:5: warning: ignoring return value of ?feof?, declared with attribute warn_unused_result [-Wunused-result] feof (from); ^ http.c: In function ?get_response_headers?: http.c:1392:2: warning: ignoring return value of ?fgets?, declared with attribute warn_unused_result [-Wunused-result] fgets(line, 5, sockrfp); ^ http.c:1414:2: warning: ignoring return value of ?fgets?, declared with attribute warn_unused_result [-Wunused-result] fgets(line+n, sizeof(line), sockrfp); ^ image.c: In function ?mem_to_png?: image.c:505:2: warning: incompatible implicit declaration of built-in function ?memcpy? memcpy(data, desc->buf + desc->x.pos,length); ^ image.c: In function ?png_to_mem?: image.c:703:2: warning: incompatible implicit declaration of built-in function ?memcpy? memcpy(desc->buf + desc->x.pos, data ,length); ^ image.c: In function ?gif_mem_input?: image.c:858:2: warning: incompatible implicit declaration of built-in function ?memcpy? memcpy(data,desc->buf + desc->x.pos,copied); ^ image.c: In function ?gif2bitmap?: image.c:908:17: error: too few arguments to function ?DGifOpen? if ((GifFile = DGifOpen((void*)&desc, &gif_mem_input)) == NULL) ^ In file included from image.c:61:0: /usr/include/gif_lib.h:182:14: note: declared here GifFileType *DGifOpen(void *userPtr, InputFunc readFunc, int *Error); /* new one (TVT) */ ^ image.c:948:3: warning: incompatible implicit declaration of built-in function ?memcpy? memcpy(Raster, LastImg->RasterBits, bmp->width*bmp->height); ^ image.c:1086:2: error: too few arguments to function ?DGifCloseFile? DGifCloseFile(GifFile); ^ In file included from image.c:61:0: /usr/include/gif_lib.h:183:9: note: declared here int DGifCloseFile(GifFileType * GifFile, int *ErrorCode); ^ image.c: In function ?optimize_palette?: image.c:2201:3: warning: incompatible implicit declaration of built-in function ?memcpy? memcpy (bmp->palette, new_palette, sizeof (unsigned char) * bmp->pal_bpp * used_colors); ^ image.c:2271:5: warning: incompatible implicit declaration of built-in function ?memcpy? memcpy (bmp->palette, new_palette, sizeof (unsigned char) * bmp->pal_bpp * used_colors); ^ x86_64-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -march=native -O2 -pipe -c -o netd.o netd.c Makefile:456: recipe for target 'image.o' failed make[3]: *** [image.o] Error 1 make[3]: *** Waiting for unfinished jobs.... make[3]: Leaving directory '/home/tmp/portage/net-proxy/ziproxy-3.3.1-r1/work/ziproxy-3.3.1/src' Makefile:472: recipe for target 'all-recursive' failed make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory '/home/tmp/portage/net-proxy/ziproxy-3.3.1-r1/work/ziproxy-3.3.1/src' Makefile:325: recipe for target 'all' failed make[1]: *** [all] Error 2 make[1]: Leaving directory '/home/tmp/portage/net-proxy/ziproxy-3.3.1-r1/work/ziproxy-3.3.1/src' Makefile:329: recipe for target 'all-recursive' failed make: *** [all-recursive] Error 1 * ERROR: net-proxy/ziproxy-3.3.1-r1::gentoo failed (compile phase): * emake failed * * If you need support, post the output of `emerge --info '=net-proxy/ziproxy-3.3.1-r1::gentoo'`, * the complete build log and the output of `emerge -pqv '=net-proxy/ziproxy-3.3.1-r1::gentoo'`. * The complete build log is located at '/home/tmp/portage/net-proxy/ziproxy-3.3.1-r1/temp/build.log'. * The ebuild environment file is located at '/home/tmp/portage/net-proxy/ziproxy-3.3.1-r1/temp/environment'. * Working directory: '/home/tmp/portage/net-proxy/ziproxy-3.3.1-r1/work/ziproxy-3.3.1' * S: '/home/tmp/portage/net-proxy/ziproxy-3.3.1-r1/work/ziproxy-3.3.1' >>> Failed to emerge net-proxy/ziproxy-3.3.1-r1, Log file: >>> '/home/tmp/portage/net-proxy/ziproxy-3.3.1-r1/temp/build.log' * Messages for package net-proxy/ziproxy-3.3.1-r1: * ERROR: net-proxy/ziproxy-3.3.1-r1::gentoo failed (compile phase): * emake failed * * If you need support, post the output of `emerge --info '=net-proxy/ziproxy-3.3.1-r1::gentoo'`, * the complete build log and the output of `emerge -pqv '=net-proxy/ziproxy-3.3.1-r1::gentoo'`. * The complete build log is located at '/home/tmp/portage/net-proxy/ziproxy-3.3.1-r1/temp/build.log'. * The ebuild environment file is located at '/home/tmp/portage/net-proxy/ziproxy-3.3.1-r1/temp/environment'. * Working directory: '/home/tmp/portage/net-proxy/ziproxy-3.3.1-r1/work/ziproxy-3.3.1' * S: '/home/tmp/portage/net-proxy/ziproxy-3.3.1-r1/work/ziproxy-3.3.1' pascal@xxx ~ $These are my make.conf vars:
CHOST="x86_64-pc-linux-gnu" CFLAGS="-march=native -O2 -pipe" CXXFLAGS="${CFLAGS}" MAKEOPTS="-j7"So far, I have this package masked while ziproxy 3.3.1 emerged normally and it's working without any issues. I wonder what changed in that "-r1" release that breaks my emerge.
-
Ok, after I removed a few weird ebuilds, emerge -uD world worked just fine.
-
Update:
So, I tried to
emerge -C udev && emerge -1 eudev
And now emerge -uDp world shows me this:
-
Hi guys.
This is my situation now:
I'll paste the text version to help track this page from Google:
[ebuild N ] sys-fs/udev-171-r10 USE="gudev hwdb -extras -introspection -keymap (-selinux)" [ebuild U ] net-p2p/bitcoin-qt-0.9.3 [0.8.6] USE="ljr%* {-test%}" LINGUAS="-ach% -be_BY% -ca@valencia% -cmn% -es_DO% -es_MX% -es_UY% -gl% -id_ID% -ka% -kk_KZ% -ko_KR% -ky% -mn% -ms_MY% -pam% -sah% -sl_SI% -sq% -ur_PK% -uz@Cyrl% -vi% -vi_VN% -zh_HK%" [blocks B ] sys-fs/udev ("sys-fs/udev" is blocking sys-fs/eudev-1.5.3-r2) [blocks B ] <sys-fs/udev-186 ("<sys-fs/udev-186" is blocking sys-fs/udev-init-scripts-27-r1) !!! Multiple package instances within a single package slot have been pulled !!! into the dependency graph, resulting in a slot conflict: dev-libs/icu:0 (dev-libs/icu-54.1-r1000::gentoo, ebuild scheduled for merge) pulled in by (no parents that aren't satisfied by other packages in this slot) (dev-libs/icu-53.1-r1000::gentoo, ebuild scheduled for merge) pulled in by dev-libs/icu:0/53=[abi_x86_64(-)] required by (dev-db/sqlite-3.8.6::gentoo, installed) >=dev-libs/icu-49:0/53= required by (dev-qt/qtcore-4.8.5-r2::gentoo, installed) (and 1 more with the same problems)So, I have sys-fs/eudev-1.5.3-r2 installed and also virtual/udev-208-r2 but not sys-fs/udev
Are we moving to udev and I missed the memo?
-
As per http://bugs.funtoo.org/browse/FL-986 Funtoo now updating udev (eudev). This update require manual intervention, here are the steps after tree update (emerge --sync)
# emerge --sync
# emerge --deselect udev
# emerge virtual/udev
# dispatch-conf or etc-update (be careful)
# emerge @preserved-rebuild
Is that right? I'm a bit confused here.
mira ~ # emerge --version Portage 2.3.6-r8 (funtoo/1.0/linux-gnu/arch/x86-64bit, gcc-4.8.2, glibc-2.18-r1, 3.11.6-gentoo-pbx x86_64) mira ~ # emerge --sync >>> Starting git pull... [...] >>> Git pull in /usr/portage successful mira ~ # emerge --deselect udev >>> No matching atoms found in "world" favorites file...
MySQL file collision
in Portage Help
Posted
@lazlo.vii I'll give a look at pkg-config, so far I solved it by unmerging mysql (didn't try to emerge back again).