znavko
-
Posts
123 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Posts posted by znavko
-
-
Installing a Bootloader section has those instructions.
-
sorry. lxdm works if add to /etc/conf.d/xdm: rc_need="dbus"
-
sorry `rc-update -u` solved one of those bugs like this:
# rc-update delete NetworkManager # rc-update add NetworkManager # rc-update -u # reboot .. system booted normally, authorization in slim was normal, lxde appeared... -
I tried this:
# emerge wicd ...it installed wicd and 5 packages more (dependencies... # rc-update delete NetworkManager # rc-update add wicd # rebootsystem booted normally, i got lxde. i opened wicd gui from lxde applet button. it did not see the network, wifi was in status enabled. i disabled. when click 'enable wireless' it did not do anything. in few seconds wicd has seen network as anonymous. after 15 seconds it got its name. i typed pass and press button to connect. it connected but n internet. and the button 'connect' rest same (did not changed to 'disconnect'). I added networkmanager to rc-update and rebooted.
rebooted. after authorization in slim - black screen. I understood only one: xdm does not run after I ad networkmanager to rc-update. I deleted xdm from rc-update and added it again. reboot was normal, I authorized in slim and lxde run. wifi was connected with networkmanager automatically. but wicd gave messages that it cannot connect to d-bus. I unmerged wicd, but only 1 package was deleted (not 6 as were merged).
I do not know how many bugs I see and how to report all of them.
1. wicd cannot connect to dbus
2. xdm does not start when I add NetworkManager to rc-update after it like this: 'rc-update add NetworkManager'I cannot connect to wifi with wpa_supplicant never: https://www.linux.org.ru/forum/linux-install/13595194
I do not know how to describe my problem on bugs.funtoo.org
also do not know is it necessary to write 'default' when add service to rc-update?
-
Now it's working ok with SLIM. It boots ok, it does authorize and run lxde normally. it connects to wifi.
I only want more answers:
- how to disable nm-dispatcher
- what is alternative for networkmanager with lxde applet
- what is dbus and how it works
- how to rearrange start of lxde and networkmanager
- how to see the reasons of black screen while boot and lxdm does not start
- also where to configure networkmanager
# pwd /etc/NetworkManager # ls -R .: conf.d dispatcher.d dnsmasq-shared.d dnsmasq.d system-connections ./conf.d: ./dispatcher.d: 10-openrc-status no-wait.d pre-down.d pre-up.d ./dispatcher.d/no-wait.d: ./dispatcher.d/pre-down.d: ./dispatcher.d/pre-up.d: ./dnsmasq-shared.d: ./dnsmasq.d: ./system-connections: internet -
Thank you. But not helped. The `rc-update delete NetworkManager` helps only.
Also I changed dm to LXDM, editing only one variable in /etc/conf.d/xdm: DISPLAY_MANAGER="lxdm". It run only once without nm-dispatcher's problem, but the second and further times the black screen appeared without any message while booting .
I've changed dm to Slim and it's working ok. but sometimes the same blackscreen after authorization in sLIM. I solve this with deleting xdm and adding it to rc-upate again.
after I deleted dhcpcd - the same black screen after authorization in slim.
Do not know what to do. I am trying this
# emerge -avDuN net-misc/networkmanager These are the packages that would be merged, in order: Calculating dependencies... done! Total: 0 packages, Size of downloads: 0 KiB !!! The following update has been skipped due to unsatisfied dependencies: dev-python/requests:0 selected: dev-python/requests-2.13.0:0/0::python-kit, installed skipped: dev-python/requests-2.18.4:0/0::python-kit, ebuild scheduled for merge (see unsatisfied dependency below) emerge: there are no ebuilds to satisfy ">=dev-python/certifi-2017.4.17[python_targets_pypy(-)?,python_targets_pypy3(-)?,python_targets_python2_7(-)?,python_targets_python3_4(-)?,python_targets_python3_5(-)?,python_targets_python3_6(-)?,-python_single_target_pypy(-),-python_single_target_pypy3(-),-python_single_target_python2_7(-),-python_single_target_python3_4(-),-python_single_target_python3_5(-),-python_single_target_python3_6(-)]". (dependency required by "dev-python/requests-2.18.4::python-kit" [ebuild]) # emerge -avDuN --with-bdeps=y net-misc/networkmanager These are the packages that would be merged, in order: Calculating dependencies... done! Total: 0 packages, Size of downloads: 0 KiB !!! The following update has been skipped due to unsatisfied dependencies: dev-python/requests:0 selected: dev-python/requests-2.13.0:0/0::python-kit, installed skipped: dev-python/requests-2.18.4:0/0::python-kit, ebuild scheduled for merge (see unsatisfied dependency below) emerge: there are no ebuilds to satisfy ">=dev-python/certifi-2017.4.17[python_targets_pypy(-)?,python_targets_pypy3(-)?,python_targets_python2_7(-)?,python_targets_python3_4(-)?,python_targets_python3_5(-)?,python_targets_python3_6(-)?,-python_single_target_pypy(-),-python_single_target_pypy3(-),-python_single_target_python2_7(-),-python_single_target_python3_4(-),-python_single_target_python3_5(-),-python_single_target_python3_6(-)]". (dependency required by "dev-python/requests-2.18.4::python-kit" [ebuild])Sorry. how this I have not solved never. What to do?
# emerge -1uN networkmanager Calculating dependencies... done! >>> Auto-cleaning packages... >>> No outdated packages were found on your system. -
No, removing /etc/NetworkManager/dispatcher.d/10-openrc-status did not help. problem appeared again.
It stops on message 'nm-dispatcher: req:4: 'hostname' start running ordered scripts' I need to open new console with ctrl + alt + f4, authorize and run lightdm then authorize again, only after that lxde runs. and tis is what i have after lxde run.
# rc-status --all Runlevel: default dhcpcd [ started ] dbus [ started ] NetworkManager [ inactive ] netmount [ scheduled ] sshd [ started ] xdm [ started ] local [ started ] Runlevel: sysinit sysfs [ started ] devfs [ started ] dmesg [ started ] kmod-static-nodes [ started ] opentmpfiles-dev [ started ] udev [ started ] cgroups [ started ] Runlevel: shutdown savecache [ stopped ] killprocs [ stopped ] mount-ro [ stopped ] Runlevel: boot hwclock [ started ] swap [ started ] modules [ started ] fsck [ started ] root [ started ] mtab [ started ] localmount [ started ] procfs [ started ] loopback [ started ] urandom [ started ] sysctl [ started ] binfmt [ started ] hostname [ started ] bootmisc [ started ] termencoding [ started ] keymaps [ started ] opentmpfiles-setup [ started ] Runlevel: nonetwork local [ started ] Dynamic Runlevel: hotplugged Dynamic Runlevel: needed/wanted modules-load [ started ] xdm-setup [ started ] Dynamic Runlevel: manual -
Quote
can you get to this state, please? So removing NM from xinit and adding it to default and rebooting.
NetworkManager is in rc-update. I deleted it from xinit.
QuoteYou are saying: "I authorize to lightdm ... " so Xorg does start even with NM enabled?
Yes. Problem was transformed by itself: it did allow to start lightdm, but when I authorize I got the blackscreen with nm-dispatcher's 10 messages.
I do not know why but after `rc-udate delete..` and `rc-update add...` nm-dispatcher did allow to start lightdm, but stopped booting after authorization. And I needed to start new console with Ctrl + Alt + F4, authorize there and run `lightdm` where I authorize, and LXDE started normally in this console.
But now my problem is solved.
Networkmanager is in rc-update. I only do: deleted /etc/NetworkManager/dispatcher.d/10-openrc-status.
But also I deleted modemmanager from boot as described here https://askubuntu.com/questions/216114/how-can-i-remove-modem-manager-from-boot
Can you see bug in /etc/NetworkManager/dispatcher.d/10-openrc-status ?
-
after reboot the problem disappeared.
Solution: delete /etc/NetworkManager/dispatcher.d/10-openrc-status
What do you think?
-
New trying was this:
# pwd /etc/NetworkManager/dispatcher.d # ls 10-openrc-status no-wait.d pre-down.d pre-up.d # cat 10* #!/bin/sh # Copyright (c) 2012 Alexandre Rostovtsev # Released under the 2-clause BSD license. # Ensures that the NetworkManager OpenRC service is marked as started and # providing net only when it has a successful connection. if [ ! -e "/run/openrc/softlevel" ]; then # OpenRC is not running exit 0 fi # Ensure rc-service is in PATH PATH="${PATH}:/sbin:/usr/sbin" # Exit if the NetworkManager OpenRC service is not running rc-service NetworkManager status 2>&1 | grep -Eq "status: (starting|started|inactive|stopping)" || exit 0 # Call rc-service in background mode so that the start/stop functions update # NetworkManager service status to started or inactive instead of actually # starting or stopping the daemon export IN_BACKGROUND=YES case "$2" in up) nm-online -t 0 -x && ! rc-service NetworkManager status 2>&1 | grep -q started && exec rc-service NetworkManager start ;; down) nm-online -t 0 -x || rc-service NetworkManager status 2>&1 | grep -q stopped || exec rc-service NetworkManager stop ;; pre-sleep) rc-service NetworkManager status 2>&1 | grep -q stopped || exec rc-service NetworkManager stop ;; esac exit 0 # vim: set ts=4: # mv 10* ~ # ls no-wait.d pre-down.d pre-up.d # reboot -
I added start of NetworkManager to system xinitrc.d instead of rc:
# cd /etc/X11/xinit/ # ls xinitrc xinitrc.d xserverrc # cd xinitrc.d # ls 00-xhost 40-libcanberra-gtk-module 80-dbus 90-consolekit # nano 92-networkmanager # # ls -la итого 28 drwxr-xr-x 2 root root 4096 дек 29 16:45 . drwxr-xr-x 3 root root 4096 дек 21 06:12 .. -rwxr-xr-x 1 root root 255 дек 21 06:12 00-xhost -rwxr-xr-x 1 root root 275 дек 20 19:17 40-libcanberra-gtk-module -rwxr-xr-x 1 root root 341 дек 24 20:02 80-dbus -rwxr-xr-x 1 root root 1027 дек 24 21:29 90-consolekit -rw-r--r-- 1 root root 144 дек 29 16:45 92-networkmanager # chmod +x 92* # rc-update binfmt | boot bootmisc | boot cgroups | sysinit dbus | default devfs | sysinit dhcpcd | default dmesg | sysinit fsck | boot hostname | boot hwclock | boot keymaps | boot killprocs | shutdown kmod-static-nodes | sysinit local | default nonetwork localmount | boot loopback | boot modules | boot mount-ro | shutdown mtab | boot netmount | default opentmpfiles-dev | sysinit opentmpfiles-setup | boot procfs | boot root | boot savecache | shutdown sshd | default swap | boot sysctl | boot sysfs | sysinit termencoding | boot udev | sysinit urandom | boot xdm | default # rebootnot helped
-
I've deleted NetworkManager from rc, rebooted, authorized normally and saw LXDE without any problems. I opened terminal: `su`, `NetworkManager`
it started and wifi was connected.
This is not linux way, but one solution is to add NetworkManager to xinit not adding to rc.
But I want linux-way. is it a bug? Do I need netmount if I do not use home network?
-
after reboot I saw boot message 'DHCP started' and one more after it. But the next 20 messages about ModemManager, NetworkMnager, netmount disappeared. Afer filling loging form LXDE was shown. But no network.
After adding NetworkManager to rc `rc-update add NetworkManager default` and `reboot` I authorize to lightdm and see the same blackscreen with nm-dispatcher messages. Also during booting I saw connection progress and other 20 messages about ModemManager, NetworkManager, netmount
/var/log/Xorg.0.log - https://pastebin.com/7QGg1PTG
Can I replace networkmanager's start after login? or may be rearrange?
-
# /etc/init.d/xdm stop * Stopping lightdm ... * start-stop-daemon: no matching processes found [ ok ]# rm /var/log/X.* rm: невозможно удалить «/var/log/X.*»: No such file or directory # cd /var/log # ls ConsoleKit dmesg lightdm sandbox xdm.log Xorg.0.log emerge-fetch.log news slim.log Xorg.0.log.old emerge.log pm-powersave.log tallylog cups lastlog portage wtmp # rm /var/log/Xorg*# rc-update delete NetworkManager * service NetworkManager removed from runlevel default # reboot -
Here it is the continue:
-
# epro === Enabled Profiles: === arch: x86-64bit build: current subarch: intel64-silvermont flavor: desktop mix-ins: lxde === Python kit: === branch: 3.4-prime === All inherited flavor from desktop flavor: === workstation (from desktop flavor) core (from workstation flavor) minimal (from core flavor) === All inherited mix-ins from desktop flavor: === X (from workstation flavor) audio (from workstation flavor) dvd (from workstation flavor) media (from workstation flavor) mediadevice-audio-consumer (from media mix-in) mediadevice-base (from mediadevice-audio-consumer mix-in) mediadevice-video-consumer (from media mix-in) mediadevice-base (from mediadevice-video-consumer mix-in) mediaformat-audio-common (from media mix-in) mediaformat-gfx-common (from media mix-in) mediaformat-video-common (from media mix-in) console-extras (from workstation flavor) print (from desktop flavor) # ego kit /var/git/meta-repo (updated 1 day 24 hours 57 minutes ago): kit active branch default stability core-kit 1.0-prime (same) prime core-hw-kit master (same) prime security-kit 1.0-prime (same) prime xorg-kit 1.19-prime (same) prime gnome-kit 3.20-prime (same) prime kde-kit 5.10-prime (same) prime media-kit 1.1-prime (same) prime perl-kit 5.24-prime (same) prime python-kit 3.4-prime (same) prime php-kit master (same) prime java-kit 1.1-prime (same) prime ruby-kit 1.1-prime (same) prime haskell-kit 1.1-prime (same) prime ml-lang-kit 1.1-prime (same) prime lisp-scheme-kit 1.1-prime (same) prime lang-kit 1.1-prime (same) prime dev-kit 1.1-prime (same) prime xfce-kit 4.12-prime (same) prime desktop-kit 1.1-prime (same) prime editors-kit master (same) prime net-kit master (same) prime text-kit master (same) prime science-kit master (same) prime games-kit master (same) prime nokit master (same) prime NOTE: This information comes from /etc/ego.conf and meta-repo metadata. After making changes to ego.conf, be sure to run ego sync in so that the individual kit repositories on disk are synchronized with the kit branches shown above.# emerge -pvq @world > https://pastebin.com/YSv27XbG
-
I added world file in reply above.
# rc-status -a Runlevel: default dbus [ started ] NetworkManager [ started ] netmount [ started ] sshd [ started ] xdm [ started ] local [ started ] Runlevel: sysinit sysfs [ started ] devfs [ started ] dmesg [ started ] kmod-static-nodes [ started ] opentmpfiles-dev [ started ] udev [ started ] cgroups [ started ] Runlevel: shutdown savecache [ stopped ] killprocs [ stopped ] mount-ro [ stopped ] Runlevel: boot hwclock [ started ] swap [ started ] modules [ started ] fsck [ started ] root [ started ] mtab [ started ] localmount [ started ] procfs [ started ] loopback [ started ] urandom [ started ] sysctl [ started ] binfmt [ started ] hostname [ started ] bootmisc [ started ] termencoding [ started ] keymaps [ started ] opentmpfiles-setup [ started ] Runlevel: nonetwork local [ started ] Dynamic Runlevel: hotplugged Dynamic Runlevel: needed/wanted modules-load [ started ] xdm-setup [ started ] Dynamic Runlevel: manualLXDE starts with lightdm that starts with /etc/conf.d/xdm line 'lightdm'
nm-dispatcher may break lightdm work when it is running lxde, and it stops - I had this event one time. I never had this on slim.
-
ok. I edited post with commands eix and cat make.conf
-
I definitely like Funtoo. I installed wpa_supplicant without any conflicts. Rebooted. I also look at this inconvenient message from nm-dispatcher and need to run another console to start lightdm.But wifi is working 8)
@palica, yes I booted into graphic mode, to LXDE before this update.
# cat /etc/portage/make.conf MAKEOPTS="-j5" LINGUAS="en_US ru_RU" L10N="${LINGUAS}" VIDEO_CARDS="intel" INPUT_DEVICES="evdev keyboard mouse synaptics" CPU_FLAGS_X86="mmx mmxext pclmul popcnt sse sse2 sse3 sse4_1 sse4_2 ssse3" CFLAGS="-march=silvermont -mno-aes -O2 -pipe" CXXFLAGS="${CFLAGS}" FFLAGS="${CFLAGS}" FCFLAGS="${CFLAGS}" USE="alsa cairo dbus gui imagemagick introspection \ network opengl perl printsupport \ svg widgets \ "eix -I "xf86-*" [I] x11-drivers/xf86-input-evdev [1] Available versions: 2.10.5 Installed versions: 2.10.5(21:49:20 20.12.2017) Homepage: https://www.x.org/wiki/ Description: Generic Linux input driver [I] x11-drivers/xf86-input-keyboard [1] Available versions: 1.9.0 Installed versions: 1.9.0(21:43:56 20.12.2017) Homepage: https://www.x.org/wiki/ Description: Keyboard input driver [I] x11-drivers/xf86-input-mouse [1] Available versions: 1.9.2 Installed versions: 1.9.2(21:48:27 20.12.2017) Homepage: https://www.x.org/wiki/ Description: X.Org driver for mouse input devices [I] x11-drivers/xf86-input-synaptics [1] Available versions: 1.9.0 {KERNEL="linux"} Installed versions: 1.9.0(21:47:39 20.12.2017)(KERNEL="linux") Homepage: https://cgit.freedesktop.org/xorg/driver/xf86-input-synaptics/ Description: Driver for Synaptics touchpads [I] x11-drivers/xf86-video-intel [1] Available versions: 2.99.917_p20160621-r2 2.99.917_p20170716 {debug dri +dri3 +sna +udev uxa xvmc} Installed versions: 2.99.917_p20170716(21:46:43 20.12.2017)(dri dri3 sna udev -debug -uxa -xvmc) Homepage: https://www.x.org/wiki/ Description: X.Org driver for Intel cards [1] "xorg-kit" /var/git/meta-repo/kits/xorg-kit Found 5 matches# cat /var/lib/portage/world | nc termbin.com 9999
http://termbin.com/gudc -
I installed dhcpcd with this: `emerge dhcpcd`. So just 1 package pulled and installed.
When I rebooted lightdm started very well without any stops.
But nmtui did not see the wi-fi. so i boot to systemrescuecd to emerge wpa_supplicant again.
-
Humm. I was reading archlinux wiki https://wiki.archlinux.org/index.php/NetworkManager#Avoiding_the_dispatcher_timeout
I've not found scripts mentioned there in my system. But I saw others, that I do not want, here:
# pwd /usr/lib/systemd/system # ls accounts-daemon.service iptables.service alsa-restore.service lightdm.service alsa-state.service lxdm.service basic.target.wants mdadm-grow-continue@.service canberra-system-bootup.service mdadm-last-resort@.service canberra-system-shutdown-reboot.service mdadm-last-resort@.timer canberra-system-shutdown.service mdmon@.service cups-browsed.service mdmonitor.service dhcpd4.service pwcheck.service dhcpd6.service rsyncd.service dhcrelay4.service saslauthd.service dhcrelay6.service slapd.service geoclue.service slim.service git-daemon.socket sshd.service git-daemon@.service sshd.socket gpm.service sshd@.service ip6tables-restore.service tor.service ip6tables-store.service udisks2.service ip6tables.service upower.service iptables-restore.service xdm.service iptables-store.serviceThere were wpa_supplicant's 4 services and dhcpcd services.So I deleted wpa_supplicant and have just running deleting dcpcd and saw it is system file. I aborted and run `emerge -auDN dcpcd` but got nothing.
Now I cannot install dhcpcd:
# emerge -auDN dhcpcd These are the packages that would be merged, in order: Calculating dependencies... done! !!! The following update has been skipped due to unsatisfied dependencies: dev-python/requests:0 selected: dev-python/requests-2.13.0:0/0::python-kit, installed skipped: dev-python/requests-2.18.4:0/0::python-kit, ebuild scheduled for merge (see unsatisfied dependency below) emerge: there are no ebuilds to satisfy ">=dev-python/certifi-2017.4.17[python_targets_pypy(-)?,python_targets_pypy3(-)?,python_targets_python2_7(-)?,python_targets_python3_4(-)?,python_targets_python3_5(-)?,python_targets_python3_6(-)?,-python_single_target_pypy(-),-python_single_target_pypy3(-),-python_single_target_python2_7(-),-python_single_target_python3_4(-),-python_single_target_python3_5(-),-python_single_target_python3_6(-)]". (dependency required by "dev-python/requests-2.18.4::python-kit" [ebuild])How to fix nm-dispatcher and install my dcpcd ? Also do I need wpa_supplicant?
-
Simply pressing Ctrl + Alt + F4 has run new console, where I authorized and typed `lightdm`. System booted, I authorized/
I rebooted. lightdm runs by itsels. But after I typed login and password and pressed enter nm-dispatcher run again and stopped booting again. I rebboted and nm-dispatcher stopped everything again.
I only want to know why ModemManager is so ugly, how to work with wifi without nm-dispatcher?
Also how to boot to text-mode with my so specific kernel line?
-
I found one error: wrong synaptics.conf file where I wanted to add double-click using arch manual https://wiki.archlinux.org/index.php/Touchpad_Synaptics#Synclient I added command `synclient tapbutton=1` in file.
When deleted I could `startx`
But after reboot nm-dispatcher does not allow to boot. I press enter but nothing happens https://itmag.es/5PLPW
It stops on line `nm-dispatcher: req:4 'hostname': start running ordered scripts...`
I also cannot boot to console using my grub line:
linux /kernel-debian-sources-x86_64-4.8.15-1 rootfstype=auto real_root=/dev/sda3 rootfstype=ext4
I added to the end 'quiet text' not helped, stops on nm-dispatcher. I added to the end 'init=/bin/sh' not helped also.
-
Hello! Funtoo is so pretty useful and fast. I want you to help me to boot in graphic mode.
Here are the errors of xorg that I solved in next reply. And the other problem is nm-dispatcher's timeout on boot.
After running `ego sync`, `emerge --sync`, `eix-update`, `emerge --avuND --with-bdeps=y --complete-graph=y --backtrack=30 --keep-going --verbose-conflicts --exclude "gentoo-sources firefox gimp openshot glibc perl pyrhon gcc" world `
and successful complete with some yellow lines in the end my Funtoo does not start XORG and lightdm.
After boot I see this https://itmag.es/8jZn
Pressing any key gives authorization. After authorization I cannot start lightdm and xorg:# lightdm ** (lightdm:3599): WARNING **: Failed to get list of logind seats: GDBus.Error: org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.login1 was not provided by any .servce files # startx xauth: file /root/.serverauth.3572 does not exist X.Org X Server 1.19.3 Release Date.... .... Current version of pixman: 0.34.0 .... ...something about 'synclient tapbutton=1` wrong in /etc/X11/xorg.conf.d/50-synaptics.conf ... (EE) Fatal server error: no screens found(EE) Please also check the file at "/var/log/Xorg.0.log" for additional information. Server terminated with error (1). Closing log file. xinit: giving up xinit: unable to connect to X serer: Connection refused xinit: server error# lspci -kv | grep VGA | nc termbin.com 9999
http://termbin.com/awwnc# lsmod | nc termbin.com 9999
http://termbin.com/7po0# dmesg > 111
# cat 111 | nc termbin.com 9999
http://termbin.com/eoktWhat to do?
PS: I use debian-sources, not gentoo-sources. I copied and quickly run this line adding exceptions, did not see it has gentoo-sources atom.
How to upgrade and patch kernel?
in General Discussion
Posted
Hello! Some news like this https://lkml.org/lkml/2018/1/3/780 nudged me to ask how to work with my kernel. I am using debian-sources and seeing this
# eix debian-sources [I] sys-kernel/debian-sources Available versions: (4.8.15) 4.8.15^mbs (4.11.11-r1) **4.11.11-r1^mbs (4.12.12) **4.12.12^mbs (4.13.10) **4.13.10^mbs (4.13.13) **4.13.13^mbs (4.14.2) 4.14.2^mbs {binary} Installed versions: 4.8.15(4.8.15)^mbs(21:21:26 18.12.2017)(binary) 4.14.2(4.14.2)^mbs(09:27:22 27.12.2017)(binary) Homepage: http://www.debian.org Description: Debian Sources (and optional binary kernel) * sys-kernel/debian-sources-lts Available versions: (4.9.30-LTS) **4.9.30^mbs (4.9.47-LTS) **4.9.47^mbs (4.9.51-LTS) **4.9.51^mbs (4.9.65-LTS) **4.9.65^mbs {binary} Homepage: http://www.debian.org Description: Debian Sources (and optional binary kernel) Found 2 matches# cat /proc/version Linux version 4.8.15-1 (portage@sysresccd) (gcc version 5.4.0 (Funtoo 5.4.0) ) #1 SMP Mon Dec 18 16:46:40 -00 2017 # uname -r 4.8.15-1 # dmesg | grep Linux [ 0.000000] Linux version 4.8.15-1 (portage@sysresccd) (gcc version 5.4.0 (Funtoo 5.4.0) ) #1 SMP Mon Dec 18 16:46:40 -00 2017 [ 4.182641] Linux agpgart interface v0.103 [ 16.151446] usb usb1: Manufacturer: Linux 4.8.15-1 ehci_hcd [ 16.222632] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 17.943979] media: Linux media interface: v0.10 [ 17.954357] Linux video capture interface: v2.00 # eselect kernel list Available kernel symlink targets: [1] linux-debian-sources-4.8.15 [2] linux-debian-sources-4.14.2 *What is mbs? Where to look if debian-sources had been patched?
If you have a time which criteria do you use choosing the kernel?
I am trying to compile kernel using wiki https://www.funtoo.org/Funtoo_Linux_Kernels
But I cannot configure kernel for intel n3530:
As I know my proc is 686. How to define 686 sub-arch to config-extract?