When I type:

emerge google-chrome

I get this:

...

!!! Your current profile is invalid. If you have just changed your profile
!!! configuration, you should revert back to the previous configuration.
!!! Allowed actions are limited to --help, --info, --search, --sync, and
!!! --version.

How do I fix it?

Regards,

donjames

During the installation of the system, I encountered the following problem:

[69/1220] /usr/lib/python-exec/python3.7/meson --internal exe --capture src/mapi/glapi/gen/marshal_generated6.c -- /var/tmp/portage/media-libs/mesa-20.2.4-r2/temp/python3.7/bin/python3 ../mesa-20.2.4/src/mapi/glapi/gen/gl_marshal.py -f ../mesa-20.2.4/src/mapi/glapi/gen/gl_and_es_API.xml -i 6 -n 8
/usr/lib/python-exec/python3.7/meson:15: DeprecationWarning: pkg_resources is deprecated as an API. See https://setuptools.pypa.io/en/latest/pkg_resources.html
  from pkg_resources import load_entry_point
[70/1220] /usr/lib/python-exec/python3.7/meson --internal exe --capture src/mapi/glapi/gen/marshal_generated0.c -- /var/tmp/portage/media-libs/mesa-20.2.4-r2/temp/python3.7/bin/python3 ../mesa-20.2.4/src/mapi/glapi/gen/gl_marshal.py -f ../mesa-20.2.4/src/mapi/glapi/gen/gl_and_es_API.xml -i 0 -n 8
/usr/lib/python-exec/python3.7/meson:15: DeprecationWarning: pkg_resources is deprecated as an API. See https://setuptools.pypa.io/en/latest/pkg_resources.html
  from pkg_resources import load_entry_point
[71/1220] /usr/lib/python-exec/python3.7/meson --internal exe --capture src/compiler/ir_expression_operation.h -- /var/tmp/portage/media-libs/mesa-20.2.4-r2/temp/python3.7/bin/python3 ../mesa-20.2.4/src/compiler/glsl/ir_expression_operation.py enum
FAILED: src/compiler/ir_expression_operation.h 
/usr/lib/python-exec/python3.7/meson --internal exe --capture src/compiler/ir_expression_operation.h -- /var/tmp/portage/media-libs/mesa-20.2.4-r2/temp/python3.7/bin/python3 ../mesa-20.2.4/src/compiler/glsl/ir_expression_operation.py enum
/usr/lib/python-exec/python3.7/meson:15: DeprecationWarning: pkg_resources is deprecated as an API. See https://setuptools.pypa.io/en/latest/pkg_resources.html
  from pkg_resources import load_entry_point
--- stderr ---
Traceback (most recent call last):
  File "../mesa-20.2.4/src/compiler/glsl/ir_expression_operation.py", line 23, in <module>
    import mako.template
  File "/usr/lib/python3.7/site-packages/mako/template.py", line 19, in <module>
    from mako import cache
  File "/usr/lib/python3.7/site-packages/mako/cache.py", line 7, in <module>
    from mako import util
  File "/usr/lib/python3.7/site-packages/mako/util.py", line 14, in <module>
    from .compat import importlib_metadata_get
  File "/usr/lib/python3.7/site-packages/mako/compat.py", line 68, in <module>
    import importlib_metadata  # noqa
  File "/usr/lib/python3.7/site-packages/importlib_metadata/__init__.py", line 18, in <module>
    from . import _adapters, _meta, _py39compat
  File "/usr/lib/python3.7/site-packages/importlib_metadata/_meta.py", line 1, in <module>
    from typing import Protocol
ImportError: cannot import name 'Protocol' from 'typing' (/usr/lib/python3.7/typing.py)

ninja: build stopped: subcommand failed.
 * ERROR: media-libs/mesa-20.2.4-r2::core-gl-kit failed (compile phase):
 *   ninja -v -j1 -l0 -C /var/tmp/portage/media-libs/mesa-20.2.4-r2/work/mesa-20.2.4-build failed
 * 
 * Call stack:
 *     ebuild.sh, line   93:  Called src_compile
 *   environment, line 2824:  Called eninja '-C' '/var/tmp/portage/media-libs/mesa-20.2.4-r2/work/mesa-20.2.4-build'
 *   environment, line 1405:  Called die
 * The specific snippet of code:
 *       "$@" || die "${nonfatal_args[@]}" "${*} failed"
 * 
 * If you need support, post the output of `emerge --info '=media-libs/mesa-20.2.4-r2::core-gl-kit'`,
 * the complete build log and the output of `emerge -pqv '=media-libs/mesa-20.2.4-r2::core-gl-kit'`.
 * The complete build log is located at '/var/tmp/portage/media-libs/mesa-20.2.4-r2/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/media-libs/mesa-20.2.4-r2/temp/environment'.
 * Working directory: '/var/tmp/portage/media-libs/mesa-20.2.4-r2/work/mesa-20.2.4'
 * S: '/var/tmp/portage/media-libs/mesa-20.2.4-r2/work/mesa-20.2.4'

graphic card on the 1' pcie4 sapphire radeon rx 6600 pulse gaming 8gb ddr6

on the 2' for this moment none
but on the 3' i have a dirty graphical carde for 5€ and lspci say me

04:00.0 VGA compatible controller: NVIDIA Corporation G96 [GeForce 9500 GS] (rev a1)

when i look up with nvidia driver i see not available or kernel too up to for the commercial driver....
so i hope with nouveau driver it can be work ???

but out of the box it doesn't work

so i do a cutom kernel with a source from kernel.org version 6.4.1 the lasted...without anyting but nouveau driver ... i have compil it like the documentation say it https://www.funtoo.org/Building_a_Kernel_from_Source

i have found how to do for nouveau in gentoo documentations

but after make modules_install && make install

i don't now what to do to boot grub on my new kernel ...

i have a new kernel and no idea to do to start it ...

how to up it in grub ?

please help .. i don't think be a noob but i'm not a guru too lol i'm sur for users it's easy lol 🙂

 

emerge --info

emerge -pv

out-emerge-info.txt out-emerge-pvq.txt

Hi,

trying to run anything gnome-* and some other gui applications on fresh install&update core2 gnome stage3 (gnome-stage3-core2_64-next-2023-01-30.tar.xz) crashes entire session and sends back to login screen. Impossible to enter places like gnome-control-center. Whatever needs to be "adjusted" has to be done via terminal/shell. Where to start to find the cause?

tia

K.

But now it fails for a new system with reasons unknown to me. Steps are
- setup partitions on sda (sda1->ext2->/boot;sda2->swap;sda3->ext4->/)
-download the stage3 gnome into /mnt/funtoo, package is this one: https://build.funtoo.org/next/x86-64bit/intel64-westmere/2023-01-31/gnome-stage3-intel64-westmere-next-2023-01-31.tar.xz

- then dropping this (while in /mnt/funtoo) on terminal: fchroot /mnt/funtoo /bin/bash --login
- terminal still stays at "livecd /mnt/funtoo", not "fchroot #"
- running a "ego sync" succeeeds with 0 errors
- dropping a "emerge -auDN @world" starts fine, but stops after some work and complaining about that i need at least 5 GIB to continue

So, what i found out so far:
- inside the fchroot (pretty sure something here failed) running a "cat /etc/fstab" reveals a "overlay / overlay defaults 0 0". If i am right, i should see the sample fstab here instead
- "df -h /" says "overlay 1.8G 544M 1.3G 31%".
- "grub-install --target=i386-pc --no-floppy /dev/sda fails with "grub-install: error: failed to get path of 'overlay'"

What am i doing wrong here?

Thanks in advance for any help

K.

at first i wanted to build a system around the latest stage3 from the westmere build available here:
https://build.funtoo.org/next/x86-64bit/intel64-westmere/2023-01-31/

But it failed always either on chrooting into the new system from the live system with a "Illegal Instruction" exception or failed with a manually created disk (copy stage3, create user, fstab etc.) from scratch and boot into the system from grub shell. Again here i got a kernel panic with "Atempted to kill init! exitcode=0x00000004".

For 0x00000004, i again found some "Illegal Instruction" issue (this is for ARM cpu, but i guess the kernel exception code 0x00000004 will be same for all architectures on illegal instructions):
https://stackoverflow.com/questions/54303119/kernel-panic-with-exitcode-0x00000004-after-init

I found several reports on that issue here:
https://bugs.funtoo.org/browse/FL-5730?jql=text ~ "westmere"

https://bugs.funtoo.org/browse/FL-6327

https://bugs.funtoo.org/browse/FL-5730

all have something to do with lack of instructions (eg. aes,sse4_x) on lower end cpus.

The actual westmere stage states in the build info that it is compiled with aes, sse4_x instructions. My P6200 definitly does not support it.

cpuid2cpuflags gives me this:

CPU_FLAGS_X86: mmx mmxext popcnt sse sse2 sse3 ssse3
lscpu flags info also does not include any aes or sse4_x instructions

So the question here is: What stage should i use to get best performance results on my P6200 cpu?

The last comment from drobbins here says that one should use the intel64-nehalem stage3:
https://bugs.funtoo.org/browse/FL-5730

But having a look at the flags also show aes and sse4_x flags:'
https://build.funtoo.org/next/x86-64bit/intel64-nehalem/2023-01-30/build-info.json

So the question already asked in the title is: What stage3 to use for Pentium 6200 (westmere) to get best performance results?

As a very, very new Funtoo user i didnt expect all these obstacles, but hey, if its too easy, its not fun 🙂

Thanks in advance

K.

TIA!

I have installed a fresh Funtoo using the instructions mentioned in  https://www.funtoo.org/Install/Introduction and I am installing gnome using “emerge gnome-light”.

The error that I ran across was : meson.build:333:2: Dependency “fuse3” not found , tried pkconfig and make

Facts:

Went to /var/tmp/portage/gnome-base/gvfs-1.44.1/build-info/gvfs-1.44.1.ebuild 

        The rdepend has a dependency for fuse which must have a version > 2.

Solution:

emerge sys-fs/fuse and then emerge “gnome-light” and the build was successful

# emerge --search  musescore
  
[ Results for search key : musescore ]
Searching...

[ Applications found : 0 ]

I had it running on current,XFCE.  May this mean It has to be fetched from some third part repo?  I don't remember how I first got it, it was more than an year ago.

I followed instructions more closely now and changed to next, Gnome (from previous current w Xfce).

Installation went swiftly, but I have stumbled on Audacity:

@lifebook-1 ~ $ emerge -p audacity

These are the packages that would be merged, in order:

Calculating dependencies... done!

emerge: there are no ebuilds to satisfy ">=media-libs/portaudio-19.06.00-r2[alsa?]".
(dependency required by "media-sound/audacity-2.3.3::media-kit" [ebuild])
(dependency required by "audacity" [argument])

I had Audacity running without problems in the earlier install. 

Any hints ?    (Thanks in advance)

I have used funtoo in this set-up for about an year without problems, but I accidentally damaged 3 partitions recently and that is why I am reinstalling.

I am still pretty much of a newbie, without formal technical background and I don' t like to mess around with grub. I have been booting most of my multiboot set-ups with Manjaro since my previous favorite bootloader (in Mint) failed to boot Manjaro.  

funtoo's installation guide points the use of ego boot, which led me to post a question here -
 https://forums.funtoo.org/topic/5005-can-i-have-funtoo-in-a-multiboot-set-up/  - when I first installed funtoo.  Unfortunately I don't remember how I dealt with it then in order to have the good result I had. I expect things will work if I just update grub in the booting distribution, which at the moment happens to be MX-Linux, and is working well as a test after I used it on older very limited machine.

I have also been able to boot multiboots by writing "40_custom" files, so  I think I can get funtoo started somehow but I don't want to miss <ego boot>, if possible.

The main reason for this post is that  I have been waiting to find time to try the multibooting suggestion proposed at  https://forums.linuxmint.com/viewtopic.php?f=42&t=315584&p=1807167&hilit=pbear+tutorial+custom+grub#p1807167   which requires installation  of grub to the PBR of non-booting distros, but I am afraid to damage my funtoo installation if I install grub to the PBR of  funtoo's root partition.

When I searched for this topic the only relevant text I found  was this - at  https://unix.stackexchange.com/questions/709783/cannot-find-a-grub-drive-for-dev-sda1-check-your-device-map:

Quote

 

 ... Are you trying to install GRUB with grub-install /dev/sda1?

Since GRUB practically requires access to MBR and the unused space between the MBR and the first partition when installing for BIOS-style boot process, try grub-install /dev/sda. If it still displays the same error message, just write your own /boot/grub/device.map file. In your case, its contents could be just

(hd0)    /dev/sda

(Ideally, you would use an appropriate /dev/disk/by-id/... pathname in place of /dev/sda, but that's not mandatory.)

grub-install /dev/sda1 would attempt to embed GRUB's boot block into PBR of partition sda1 instead of the MBR. Since most filesystems won't have a fixed space for bootloader, GRUB's boot block would have to point at /boot/grub/i386-pc/core.img by physical disk location, which used to be a very seriously discouraged installation mode. Modern versions of GRUB might no longer support installing GRUB that way at all.

The problem is, the boot block code needs to be so small it won't understand filesystems, so it reads the GRUB image using raw disk block numbers determined at GRUB installation time. For this to work, the GRUB core image needs to be placed somewhere where its physical location on disk is guaranteed to stay the same. From the OS viewpoint, /boot/grub/i386-pc/core.img is a regular file, so a defragmentation tool or a smart filesystem driver might occasionally move it to a different physical location on-disk: that would cause a total boot failure.

 

I am pretty unsure about what to do.

P.s.: It just occurred to me that maybe I should rather post this question to some GRUB forum as far as custom.cfgs are concerned,  but as far as funtoo is concerned you guys are my preferred source to answer whether funtoo can have  grub in its PBR.

My searching only resulted in https://www.funtoo.org/GPG_Signatures

my downloaded files look like this:

[arthur@esprimo-II ~]$ cd /run/media/arthur/Storage/Linux_By_Distros/Funtoo/funtoo-220715

[arthur@esprimo-II funtoo-220715]$ ls 
funtoo-livecd-20220715-1607.iso      
funtoo-livecd-20220715-1607.iso.hash.txt
funtoo-livecd-20220715-1607.iso.gpg  
node.txt

Trying to follow the link above I tried:

[arthur@esprimo-II funtoo-220715]$ gpg --keyserver pgp.mit.edu --recv-key D3B948F82EE8B4020A0410789A658306E986E8EE
gpg: key 9A658306E986E8EE: public key "Daniel Robbins (BDFL) <drobbins@funtoo.org>" imported
gpg: Total number processed: 1
gpg:               imported: 1
[arthur@esprimo-II funtoo-220715]$ gpg --edit-key E986E8EE
gpg (GnuPG) 2.2.40; Copyright (C) 2022 g10 Code GmbH
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.


pub  rsa4096/9A658306E986E8EE
     created: 2016-11-28  expires: never       usage: SC  
     trust: unknown       validity: unknown
sub  rsa4096/2E5B26155568E28D
     created: 2016-11-28  expires: never       usage: E   
sub  rsa4096/8C7CC4D18DAD2DBC
     created: 2016-11-28  expires: never       usage: S   
[ unknown] (1). Daniel Robbins (BDFL) <drobbins@funtoo.org>
[ unknown] (2)  [jpeg image of size 5472]

gpg> trust
pub  rsa4096/9A658306E986E8EE
     created: 2016-11-28  expires: never       usage: SC  
     trust: unknown       validity: unknown
sub  rsa4096/2E5B26155568E28D
     created: 2016-11-28  expires: never       usage: E   
sub  rsa4096/8C7CC4D18DAD2DBC
     created: 2016-11-28  expires: never       usage: S   
[ unknown] (1). Daniel Robbins (BDFL) <drobbins@funtoo.org>
[ unknown] (2)  [jpeg image of size 5472]

Please decide how far you trust this user to correctly verify other users' keys
(by looking at passports, checking fingerprints from different sources, etc.)

  1 = I don't know or won't say
  2 = I do NOT trust
  3 = I trust marginally
  4 = I trust fully
  5 = I trust ultimately
  m = back to the main menu

Your decision? 4

pub  rsa4096/9A658306E986E8EE
     created: 2016-11-28  expires: never       usage: SC  
     trust: full          validity: unknown
sub  rsa4096/2E5B26155568E28D
     created: 2016-11-28  expires: never       usage: E   
sub  rsa4096/8C7CC4D18DAD2DBC
     created: 2016-11-28  expires: never       usage: S   
[ unknown] (1). Daniel Robbins (BDFL) <drobbins@funtoo.org>
[ unknown] (2)  [jpeg image of size 5472]
Please note that the shown key validity is not necessarily correct
unless you restart the program.

gpg> quit
[arthur@esprimo-II funtoo-220715]$ gpg --import node.txt
gpg: no valid OpenPGP data found.
gpg: Total number processed: 0

my node.text looked like:

[arthur@esprimo-II funtoo-220715]$ ls node.txt
gpg: key 9A658306E986E8EE: public key "Daniel Robbins (BDFL) <drobbins@funtoo.org>" imported
pub  rsa4096/9A658306E986E8EE
sub  rsa4096/2E5B26155568E28D
sub  rsa4096/8C7CC4D18DAD2DBC

I  also tried:

[arthur@esprimo-II funtoo-220715]$ ls node.txt
D3B948F82EE8B4020A0410789A658306E986E8EE
rsa4096/9A658306E986E8EE
rsa4096/2E5B26155568E28D
rsa4096/8C7CC4D18DAD2DBC

and

[arthur@esprimo-II funtoo-220715]$ ls node.txt
D3B948F82EE8B4020A0410789A658306E986E8EE
pub rsa4096/9A658306E986E8EE
sub rsa4096/2E5B26155568E28D
sub rsa4096/8C7CC4D18DAD2DBC

all  with the same result.   What must I do ?

I carefully reviewed my CPU info and googled to see the proper architecture

Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz

That points to  intel64-sandybridge

However, using that architecture I receive "Illegal instruction" error during various steps (e.g. compiling cups or running NetworkManager)

I do not want to be "too safe" and choose a generic architecture. Could you please point to the right one closest to that particular CPU?

Thank you

The title says it, I have sys-apps/util-linux-2.38.1 installed and sys-apps/shadow 4.7-r1 installed.  Portage is telling me that without shadow 4.7-r2, it cannot go on.  I just did an ego sync and I do not have a shadow newer than what is already installed.  I suspect there is a way out of this, but I am not finding it.

I also cannot compile spidermonkey >v68 and have some issues with harfbuzz and the later version of Meson, but those are other issues that I will post separately if they persist.

Any thoughts would be appreciated. Thanks

The same kernel configuration work well (without initramfs) in any other installation of Funtoo/Gentoo: for example, in my old installation of Funtoo, updated to 1.4 release, the kernel normally boot without initramfs.

I search on web but i don't find what's the problem.

using generic_64 stage3-latest

EFI boot

Chapter 12 install instructions :-

Ego sync —-> updates ok

emerge -auDN @world —> fails at dev-python/setuptools_scm

reports :- 

snip<<

ERROR dev-python/setuptools.scm-7.0.1::python module kit failed (compile phase)

       (No error message)

>>snip

Can I ignore and just manually emerge the packages that would have followed ????

Thanks all

Machine: Acer Aspire One D257, Atom N255, 1 GB RAM

Used Gentoo minimal CD for 32 bit systems, also Funtoo distribution of 32 bit systems Generic Linux

Everything worked well and fast for one hour starting from Step 1 to Step 12.

Then I typed `emerge -auDN @world`, it asked me if I wanted to update python and some other software, altogether it would be something like 74 packages to update. I pressed "Yes" sensing that with a fast internet and 74 packages, I could update things quickly.

At that point, lines after lines flashed across my tiny screen in the Acer Aspire notebook, endless .... it's 4 PM now, there is no hope of this thing ever going to finish, it's barely 18 of 74 packages!

Can someone please explain how I can get out of this plain text apocalypse?

Will I ever be able to finish installing funtoo on the machine?

Anyone experienced anything like this before?

Best,

Arin

I tried to install networkmanager as explained in the funtoo installation manual with 

chroot # emerge linux-firmware networkmanager

After calculating dependencies, it returned the following:

```(dependency required  by "virtual/rust-1.58.1::lang-kit" [ebuild])
(dependency required  by "dev-lang/spidermonkey-78.15.0::browser-kit" [ebuild])

... (there was a list of dependency required by ...)

```

Networkmanager was not installed. 

How do I resolve this problem? 

This is on an Atom processor D257, 1GB RAM Acer Aspire One.

Would greatly appreciate your guidance to solve this.

Best,

Arindam

I'm trying to build the plasma-meta packages, but I'm getting stuck at this ebuild:

[ebuild  N    ] media-libs/gst-plugins-base-1.14.4-r1  USE="X alsa egl introspection nls ogg opengl orc pango theora vorbis wayland -abi_riscv_lp64 -abi_riscv_lp64d -gbm -gles2 -ivorbis" 

The last several lines of the build are here:

libtool: link: x86_64-pc-linux-gnu-gcc -o /var/tmp/portage/media-libs/gst-plugins-base-1.14.4-r1/work/gst-plugins-base-1.14.4-abi_x86_64.amd64/gst-libs/gst/audio/tmp-introspect89oda8w9/.libs/GstAudio-1.0 -march=skylake -O2 -pipe /var/tmp/portage/media-libs/gst-plugins-base-1.14.4-r1/work/gst-plugins-base-1.14.4-abi_x86_64.amd64/gst-libs/gst/audio/tmp-introspect89oda8w9/GstAudio-1.0.o -Wl,--export-dynamic -pthread -Wl,-O1 -Wl,--sort-common -Wl,--as-needed -Wl,--export-dynamic  -L. -L/usr/lib64 -L../../../gst-libs/gst/tag/ ./.libs/libgstaudio-1.0.so -lgio-2.0 -lgmodule-2.0 -lgstbase-1.0 -lgstreamer-1.0 -lgobject-2.0 -lglib-2.0 -pthread -Wl,-rpath -Wl,/usr/lib64
/usr/lib/gcc/x86_64-pc-linux-gnu/9.2.0/../../../../x86_64-pc-linux-gnu/bin/ld: error while loading shared libraries: libbfd-2.32.0.gentoo-sys-devel-binutils-st.so: cannot open shared object file: No such file or directory
collect2: error: ld returned 127 exit status
linking of temporary binary failed: Command '['../../../libtool', '--mode=link', '--tag=CC', 'x86_64-pc-linux-gnu-gcc', '-o', '/var/tmp/portage/media-libs/gst-plugins-base-1.14.4-r1/work/gst-plugins-base-1.14.4-abi_x86_64.amd64/gst-libs/gst/audio/tmp-introspect89oda8w9/GstAudio-1.0', '-export-dynamic', '-march=skylake', '-O2', '-pipe', '/var/tmp/portage/media-libs/gst-plugins-base-1.14.4-r1/work/gst-plugins-base-1.14.4-abi_x86_64.amd64/gst-libs/gst/audio/tmp-introspect89oda8w9/GstAudio-1.0.o', '-L.', '-L/usr/lib64', '-rpath', '/usr/lib64', '-L/usr/lib64', '-rpath', '/usr/lib64', '-L../../../gst-libs/gst/tag/', 'libgstaudio-1.0.la', '-lgio-2.0', '-Wl,--export-dynamic', '-lgmodule-2.0', '-pthread', '-lglib-2.0', '-lgstbase-1.0', '-lgstreamer-1.0', '-lgobject-2.0', '-lglib-2.0', '-Wl,-O1', '-Wl,--sort-common', '-Wl,--as-needed']' returned non-zero exit status 1.
make[5]: *** [Makefile:1733: GstAudio-1.0.gir] Error 1
make[5]: Leaving directory '/var/tmp/portage/media-libs/gst-plugins-base-1.14.4-r1/work/gst-plugins-base-1.14.4-abi_x86_64.amd64/gst-libs/gst/audio'
make[4]: *** [Makefile:918: all] Error 2
make[4]: Leaving directory '/var/tmp/portage/media-libs/gst-plugins-base-1.14.4-r1/work/gst-plugins-base-1.14.4-abi_x86_64.amd64/gst-libs/gst/audio'
make[3]: *** [Makefile:948: audio] Error 2
make[3]: Leaving directory '/var/tmp/portage/media-libs/gst-plugins-base-1.14.4-r1/work/gst-plugins-base-1.14.4-abi_x86_64.amd64/gst-libs/gst'
make[2]: *** [Makefile:624: all-recursive] Error 1
make[2]: Leaving directory '/var/tmp/portage/media-libs/gst-plugins-base-1.14.4-r1/work/gst-plugins-base-1.14.4-abi_x86_64.amd64/gst-libs'
make[1]: *** [Makefile:748: all-recursive] Error 1
make[1]: Leaving directory '/var/tmp/portage/media-libs/gst-plugins-base-1.14.4-r1/work/gst-plugins-base-1.14.4-abi_x86_64.amd64'
make: *** [Makefile:679: all] Error 2

The file that it's complaining about does exist in my system under /usr/lib64/binutils/x86_64-pc-linux-gnu/2.32/libbfd-2.32.0.gentoo-sys-devel-binutils-st.so.

Can anyone give me pointers on how to convince this ebuild to complete?

gst-plugins-base emerge info.txt